8242-REPAIRS TO STREET LIGHTS, DG SETS AND ALLIED WORKS AT VARIOUS LOCATIONS UNDER GE STM

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft / loose soil for laying cables / pipes / erection of poles etc all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and depth exceeding 1.5 m depth and not exceeding 3m and getting out soft / loose soil for laying cables / pipes / erection of polesfor each additional 1.5m or part thereof in depth beyond the first 1.5 m etc all as specified and as directed.

Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5m from the starting point.

Returning filling in soil including spreading levelling watering well ramming in layers not exceeding 25 cm each all as directed.

Supplying and laying burnt brick Class 'B', Old size for cable cover all as specified and as directed.

Supply, lay, spread in trenches clean,dry, river sand and including spreading, levelling, punning for cushioning of cable all as directed. Note: Punned thickness shall be measured for payment

Dismantling & taking down Old Unsv pole of any type and any size/make etc complete all as specified and as directed

Supply and Fixing Steel tubular swaged pole erected to truly vertical or planted as strut complete with 6 mm thick MS Base plate,welded to pole,finial taper cap,bolts,nuts,screws,9 Mtr long, type 410 SP - 31,including drilling of holes of required size for fixing of cross arms,painting the exposed surfaces of pole with two coats of aluminium paint over a coat of red oxide zinc chrome primer and with two coats of black bituminous paint on the portion embedded in concrete, and marking pole no. with black paint at suitable height all as specified and directed by Engineer-in-Charge.

M & L for Plain cement concrete 1:2:4 type B0 using 12.5mm graded aggregate for coping to pole foundation including necessary use and waste of form work with fair finished surface and applying three coats of white wash complete all as directed.

M & L for Plain Cement concrete 1 : 4 : 8 type D2 using 40 mm graded stone aggregate for pole foundation, filling and mass concrete all as specified.

Taking out from trenches/poles/wall etc LT XLPE UG Cable /PVC Sheathed aluminium conductor armoured and relaying after fault rectification duly tested in trenches/Poles/Wall of LT UG Cable size of following sizes :Note: Rate including Earth Work. Jointing Kit will be measured and paid separately under relevant Item

LT UG Cable 2/ 3.5/ 4 core 6 Sqmm to 3.5 core 50 Sqmm

LT UG Cable 3.5 core 70 Sqmm to 3.5 core 300 Sqmm

Taking down old UNSV UG Cables and taking as schedule of credit including,Supplying, laying, jointing and testing LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts complete all as specified and directed of following sizes:

LT UG Cable 2 core 10 sqmm.

LT UG Cable 4 core 16 sqmm.

LT UG Cable 4 core 25 sqmm.

LT UG Cable 3.5 core 35 sqmm.

Supply and Fix Straight through joints Heat Shrink insulations and sealing system for underground cable including joint kits and labour complete for making joints suitable for LT XLPE/ PVC sheathed/ armoured heavy duty cables with aluminium conductor all as specified and as directed of following sizes:-

3.5/ 4 core 10 to 16 sqmm Make: Raychem/3M or equivalent

3.5/ 4 core 25 to 50 sqmm Make: Raychem/3M or equivalent

Repair and welding work the existing panel board door and provided hinges for door, if necessary and lock arrangement with provision of pad lock with keys and cleaning the welding surfaces by rubbing and polishing with two coat of synthetic enamel paint all as specified and directed.

Taking down old UNSV Main switch/ Switch fuse Unit and taking as schedule of credit including Supply & Fix following MCCBs Thermal magnetic release type directly fixing to main board/panel /walls including new alteration to panel with all necessary accessories all as specified and directed. Make: ABB/Siemens/Standard/L&T

MCCB 63A, 4 pole, 16 KA

MCCB 100A, 4 pole, 16 KA

MCCB 125A, 4 pole, 16 KA

MCCB 160A, 4 pole, 35 KA

MCCB 200A, 4 pole, 35KA

MCCB 250A, 4 pole, 35 KA

S & F in replacement of Digital Ammeter, any range from 0 to 500 Amps (with out CTs) round /square dail, flush /projected pattern in existing panel board /LT feeder pillar box etc. as per site requirement complete all as specified and directed.

S & F in replacement of Volt meter, any range from 0 to 500 Volts, round /square dail, flush /projected pattern in existing panel board /LT feeder pillar box etc. as per site requirement complete all as specified and directed.

S & F in replacement of Pilot indicator lamp assembly with LED lamp of any colour Red/Yellow/Blue,any type as per site requirement and connecting to circuit with and including 2.5 Sqmm single core PVC insulated copper conductor cable complete all as specified and directed.

M & L inreplacement for factory made sheet metal enclosure (junction panel) made out of 14 SWG CRCA sheet powder coated weather proof out door type with 60cm long legs 4 Nos made out of 40X40X6mm equal angle size of enclosure not less than 75X60X30cm depth with front and rear openable double door with locking arrangement including 4 strip aluminium bus bar of rating 600 Amps suitable for one incoming and 5 out going feeders, mounted on insulators including disconnection of cable from the burnt bus bar and connection in the new chamber with bolts and nuts, including thimbles of suitable sizes, neccessary earth work and PCC foundation for grouting of four legs all as per existing Make: Standard/L&T/Havells

M&L in replacement for aluminium tube terminals (cable lugs) of size 10/16 Sqmm Make- Dowells/Eqvt

M&L in replacement for aluminium tube terminals (cable lugs) of size 25 Sqmm Make- Dowells/Eqvt

M&L in replacement for aluminium tube terminals (cable lugs) of size 35 Sqmm Make- Dowells/Eqvt

M&L in replacement for aluminium tube terminals (cable lugs) of size 50 Sqmm Make- Dowells/Eqvt

Supply & Fix 3 phase 04 pole ON-LOAD / Change over Switch with advanced Neutral type of capacity 200 Amps including taking out old unserviceable one directly fixing to main board/panel /walls including all necessary accessories all as specified and directed. Make: ABB/Siemens/Standard/L&T

Supply & Fix 3 phase 04 pole ON-LOAD / Change over Switch with advanced Neutral type of capacity 320 Amps including taking out old unserviceable one directly fixing to main board/panel /walls including all necessary accessories all as specified and directed. Make: ABB/Siemens/Standard/L&T

Preparation of old painted surface of electric poles mild steel tubular type 7.5 to 9 m long any type / make / model above ground level including cross arms, clamps etc and applying one coat with aluminium paint on pole, cross arms, clamps, etc complete all as specified and directed.

Supply and lay in repairs GI tubes, 'light grade' galvanised, with all fittings; of bore of tube 50mm laid in trenches for drawing cables under road/drain crossings etc all as specified and directed

Supply and lay in repairs GI tubes, 'light grade' galvanised, with all fittings; of bore of tube 40mm laid in trenches for drawing cables under road/drain crossings etc all as specified and directed

Supply & Fix in repairs Bldg security Light Endura PEARL 30 W MP Bldg Sec lights New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP 66 roadway luminarie with high power LEDs as light source and electronic driver of Lamp type:30W LED 6000K all as specified and as directed.Make:- Bajaj :ENXT P 30L WH SYPCSD / Havells : ENDURACITYLITEPLATPLUSSL30WLED 757SASYBOPC / Wipro : LRO2-331-XXX-57-XX / Halonix Cat No.HL-SLD-14-30-CWDL-P

Supply & Fix in repairs LED street light fittings 70 watts 6000K new generation energy saving & environment friendly long life versatile pressure die cast aluminium IP 66 roadway luminaire with high power LED as light source and electronic driver electric operated AC single phase 240 volts with all accessories complete all as specified and as directed. Make:-Bajaj :ENXT P 72L WH CRPCSD / Havells : ENDURACITYLINE ARNEO SL 70WLED 757PASYBOTG / Wipro:LRO7-781-XXX-57-XX / Halonix Cat No.HL-SLD-01-70-CWL-R-SH

S&F LED street light fittings 90 watts 6000K new generation energy saving & environment friendly long life versatile pressure die cast aluminium IP 66 roadway luminaire with high power LED as light source and electronic driver electric operated AC single phase 240 volts with all accessories including Taking out existing UNSV old one complete all as specified and as directed.Make:-Bajaj :BRTFG 90W LEDCR / Havells:ENDURAPEARLPLUS SL 90WLED 757PASYTOPCASTHO/ Wipro:LRO7-102-XXX-57-XX / Halonix Cat No.HLSLD-C-10-90-CWL-1

S&F LED street light fittings 120 watts 6000K new generation energy saving & environment friendly long life versatile pressure die cast aluminium IP 66 roadway luminaire with high power LED as light source and electronic driver electric operated AC single phase 240 volts with all accessories including Taking out existing UNSV old one complete all as specified and as directed. Make:-Bajaj :BRTFG 120W LEDCR / Havells:ENDURAPEARLMAG SL 120WLED 757PASYTOPGASTHO/ Wipro:LRO7-132-XXX-57-XX / Halonix Cat No.HLSLD-C-10-120-CWL-1

S&F LED Flood Light fittings 50 watts 6000K new generation energy saving & environment friendly long life versatile pressure die cast aluminium IP 66 roadway luminaire with high power LED as light source and electronic driver electric operated AC single phase 240 volts with all accessories including Taking out existing UNSV old one complete all as specified and as directed.Make:- Bajaj :BJFL 50W LED I / Havells:JETAQUAN TOP PLUSFLP50W 757 SYMLENS / Halonix Cat No.HLFLD-ML21-50-CWL

Supply & Fix in repairs LED Flood Light fittings 120 watts 6000K new generation energy saving & environment friendly long life versatile pressure die cast aluminium IP 66 roadway luminaire with high power LED as light source and electronic driver electric operated AC single phase 240 volts with all accessories complete all as specified and as directed.Make:- Bajaj :BJFL 120W LED I / Havells:JETAIRISFLS 120W 757SYMLTG/ Wipro:LF20-132-XXX-57-G2 / Halonix Cat No. HLFLD-ML01-120-CWL-R-B

Supply & Fix in repairs LED Bollard Light Fitting 9 Watts long life LED module complete with electroninic driver suitable for 220/240 volt AC supply with IP 65 protection including 5 year warrenty along with warranty certificate from manufacturer all as specified and as directed.Make:- Bajaj :BGBOL6059W LED WW / Havells:BAMBOO BLS8WLED 830PSYMTOPC/ Wipro:LB14-131-XXX-65-05 / Halonix Cat No.HL0B-02-10-CW

Supply installation ,testing and commissioning in replacement of existing unserviceable LED Post Top Latten Light fitting long life LED module complete accessories as recommended by manufacturer suitable for 220/240 volt AC supply with IP 65 protection including necessary connection etc all as specified and as directed.Make:-Bajaj :BGCTN 25W LED WW / Havells:RUBY PT 25W LED830SSYMTOPC/Wipro:LP07-431-XXX-57-CL / Halonix Cat No. HLPT-S-04-25-CW

Supply and lay including removal of existing cable of 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed twin core 4 sq. mm nominal cross section in service connections incl necessary connection etc complete all as specified and directed.

Supply and lay including removal of existing cable of 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed twin core 6 sq. mm nominal cross section in service connections incl necessary connection etc complete all as specified and directed.

Supply and fixing in repairs Street light panel Timelite Distribution Board 63 A 3 pole /230 V -Analog Time Switch having following features, Phase-3, Frame size-1, Max Load(KW)-12, Timer Digital 24 Hr Contactor rating(A)-65TP, MCB Rating 63 TPN, Ref Standard Degree of Protection IP 54(Dust and Vermi Proof. Make: Indoasian or Equivalent

Supply and Fix in repairs Power Contactor 4 pole 63 including all necssary connections etc Amps complete all as specified and directed.

Supply and Fix in repairs Timer switch Digital type 230v AC 24 Hrs Suitable For Street Light control including all necssary connections etc complete all as specified and as directed

Supplying and fixing in replacement of existing unserviceable pole mounted Sheet Moulded Compound (SMC) Box weather proof type with hinged type door off white color of size 240x130x110 mm comprising of 1 No MCB 6A and 1 No neutral link complete fixed on pole with suitable clamps, bolts and nuts all as specified and as directed. Make: Sintex / Hensel

Supply and lay including removal of existing cable or fixing or passing through pipe, 1100 volts grade heavy duty PVC Insulated and FR PVC Round sheathed copper conductor (flexible) 3 core 1.5 Sqmm served with an inner sheathing of sheathed nominal cross section including suitable PVC conduit and clamp and all necessary arrangements all as specified and as directed by Engr-in -Charge.

Comprehensive maintenance for diesel engine drive generating set by carrying out routine 'A' check and 'B' check as recommended by the respective manufacture of following capacity DG sets complete including cost of minor items like petroleum jelly, grease, nut bolts etc during routine AMC checks once in every month and attending unlimated breakdown calls. Note:- (a) Engine oil, radiator coolant oil, filters etc required during the maintenance period shall be measured and paid seperatly at supply only rates and cost of labour for fixing those spares/filling of oils shall be deemed to be included in the rate quoted for this item. (b) Required T&P shall be arranged by the Contractor at site.

200 KVA DG set of any make

125 KVA DG Set of any make

62.5 KVA DG Set of any make

30 KVA DG Sets of any make

Dismantling the radiator and after cooler of following DG sets for removing all scales from the pipes by pressure washing and by using suitable solutions, checking for leakage, arresting leakage if any by welding / brazing, finiihng, drying and refixing, filling coolant and testing complete all as required will be measured and paid seperately under respective item herein after

200 KVA DG set of any make

125 KVA DG Set of any make

62.5 KVA DG Set of any make

30 KVA DG Sets of any make

Supply and fix in replacement of battery 12 volt 180 AH suitable of DG Set of diff capacity complete all as specified and directed.

Supply and fix in replacement of Battery terminal heavy duty 1mtr long standard copper cable with brass clamps, bolts,nuts,washers etc. Including taking down old unserviceable item.

supply only engine oil SAE 15W40 high quality suitable for Any Make/Capacity of DG set. Make: Servo super/Gulf Leypower XLL Diesel Engine oil

Supply only coolant oil heavy duty suitable for Any Make/Capacity of DG set. Make: Kirloskar K-cool

Supply only distilled water suitable for DG sets batteries of any make & model.

Dismantling the fuel pump from the engine, transporting to the service center and complete servicing and overhauling of the pump including replacement of service kit element, delivery valve, plunger, copper washer etc all as required including re-calibration, refixing and testing complete

30KVA to 125KVA DG set

Draining out the diesel tank, cleaning / washing out the sedimentation using Kerosine and re-filling with diesel for following DG set

30KVA to 125KVA DG set Note: Drained out diesel shall be filtered and refilled. Extra diesel will be issued by the department if required

Removing and replacing of fuel injector for following DG set 30 KVA to 200KVA DG set including taking down old unservicable

Heating and varnishing of alternator for DG set 30 to 200KVA DG set

Dismantling existing worn out following spare parts from the DG sets of capacity 30 to 125 KVA and replacing new one as per existing model / make /capacity

Oil pressure gauge

Radiator Cap

Fuel Tank Cap with Lock

Door lock of any type and size complete set

Door gasket of any type and size complete set

AVR Suitable for 125 KVA Alternators

AC Ammeter analog/Digital type

AC voltmeter analog/Digital type 0 to 500 volt

Frequency analog/ Digital meter

Multifunction digital meter

Ignition switch with key for on, off and run

Thermostat

Indicator lamp for panel board as per exisiting size

Battery charging alternator 24 volt

Fuel level Indicator

RPM meter with connecting cable

Oil pressure sensor

Contactor 4 pole 100 amps capacity

Door Hinges of any type and size complete set

Fuel Level Sensor electric

Radiator Hose

Clamp for Radiator Hose

Banjo Bolt 10 to 19 mm

Copper Washer 27mm

Cotton Waste

Spary painting of diesel generating set of following capacity with acoustic enclosure with one coat of synthetic enamel paint including writing of SM/MES No on engine and alternator, body colour shall be apple green black for foundation base frame, red for all guards, all as specified and as directed `

62.5 to 200 KVA DG set

Supply and replacement of auto 12/24V battery charger with wiring

Supply and replacement of canopy light 24V 18W with wiring

Supply and replacement of Asbestos rope

Supply and replacement of Emergency stop swtich

Supply and replacement of the following items for 30 to 200 KVA DG set including taking down old unserviceable items

Alternator adopter box including accessories

Stop solenoid

Oil pressure swtich

Temperature switch

Engine ON/OFF relay

Fan Belt

Fuel filter

Oil filter

Air Filter assembly

Fuel Tank indicator dial page

Extension of exhaust pipe match with existing size.

Water pump radiator belt

Diesel Hose

Diesel strainer

Material and labour in repairs Batery charger Module for 30 KVA to 125KVA for online charging of Batteries and necessary fixing arrangement as per the site requirement complete all as specified and as directed

Supply and Lay in repair of Rubber mat of size 1 meter x 2 meter x 10 mm complete all as Specified and directed

Supply Only Monoblock pump set suitable for 230V ,1 phase system having capacity 0.5 HP complete all as specified and directed. Note: Unserviceable Pumpset will be issued in credit

Supply Only Flexible PVC hose pipe suitable for monoblock pump set up to 1 HP pressure of size 30/40mm as per site requirment complete all as specified and directed. Note: Unserviceable PVC hose pipe will be issued in credit

Cutting unaxious green growth and wild grass by Manual Labour or by Machine at Electric /DG Set supply Installation premises, around pole,Two pole Structure, Four Pole Structure along the bondary, Fencing etc. Removing rubbish from the Site of work and depositing where directed not exc 100 metre from the starting point, complete all as specifiedand as directed.Note: The Item shall be operated 3 times in the entire period of the contract and the measurement will be taken one time for payment.

Supply & Fixing in replacement of LED driver for LED light fittings of Bollard / Bldg Security of any type and any make upto 40 Watts make: Philips/Havells/ Crompton/Bajaj/C&S

Supply & Fixing in replacement of LED driver for LED light fittings of Street Light of any type and any make upto 70 to 120 Watts make: Philips/Havells/ Crompton/Bajaj/C&S

Supply only Tinned copper(TC) fuse wire 13 to 25 S.W.G as per the site requirement all as specified and as directed

Supply and Replacement of Solar Glass of 100 to 125LPD suitable for existing panel complete all as specified and directed.

M&L for Servicing of Solar water Heater 100 to 125 LPD HHC System including minor spares part as per requirement on site complete all as specified and directed

Supply and fix in repairs GI Pipe medium grade of 20mm dia with all fittings such as union, elbows tee , bend etc laid on wall/ ceiling complete all as specified and directed

Supplying and fix in repairs wiring for circuit 2 runs of 4 sqmm + One run of 2.5 sqmm earth wire through pvc conduit complete all as specified and directed

Supply and fix in repairs GI Pipe medium grade of 40mm dia with all fittings such as union, elbows tee , bend etc laid on wall/ ceiling complete all as specified and directed

Supply and fix in repairs gun metal , globe or gate valve of 40 mm dia with iron wheel head screwed both ends for iron pipe and fix on wall/ ground

Supply and fix in repairs gun metal , globe or gate valve of 20 mm dia with iron wheel head screwed both ends for iron pipe and fix on wall/ground

M&L for Chemical washing of collector and storage tank by using Hydro chlorine chemical oil (with in three to four month) all as per site requirement and directed by Engineer in Charge.

M & L for Cleaning of panel glass with soap oil (within three to four months) as per site requirement

Removing unserviceable and refixing the new one sacrifical anode as per site requirement complete all as specified and directed

Removing unserviceable and refixing the new one heating elements suitable for existing make and size single phase 230 V complete all as specified and directed

Removing unserviceable and refixing the new one Air Wind values for presser suitable for existing system complete all as specified and directed

M&L for checking the inlet and outlet piping, fixing GI pipes , value , flange joints up to bib cocks and arresting the leakage if any , recording the temperate of the hot water and servicing overall system complete all as specified and directed

Supply and fix in repairs pole mounting bracket for single street light fitting fabricated with GI pipe medium grade 40mm dia 2 mtr long bend to shape and double clamped with fabricated MS clamp and fixed complete on side of steel tubular pole with bolts and nuts including painting complete all as specified and as directed.

Material and labour for cutting and cleaning all branches of trees on Street Light poles and maintaining the street Light fittings minimum 3 mtr all around tree braches at OTA area all as specified and directed. Note : Span shall be measured along the direction of Poles.Note: The Item shall be operated 3 times in the entire period of the contract and the measurement will be taken one time for payment.

Disconnecting dismantling & taking down Old Unservicable AMF panel and supply, installation , testing and commmising of AMF Panel Outdoor type 30KVA with aluminium bus bar of capacity 125A TPN powder coated (coloured) heat shrinkable sleeves 3.15mm CRCA sheet steel enclosure duly powder coated with inbuilt on load changeover switch of 160Amps and consists the following :-

Incoming from 30 KVA:- (i) MCCB 100 Amps four pole 25 KA-01Nos (ii) Spreaders 100Amps four pole-01 Set (iii) ExtendedExtended Rotary Handle 100 Amps four pole -01 No (iv) Earth fault module 100 Amps four pole -01 No (v) power contactor 100 Amps four pole AC1 duty with 2 NO and 2 NC Aux block coil voltage 220VAC -01 No (vi) CT 10/5A CL 1.0 10 Va -03 Nos (vii) Digital MF Meter 96X96mm with 485 port CL 1.0 -01No (viii) Indicating Lights (Red-2, Yellow-2, Green -2) (ix) VMR -01 No (x) inbuilt on load change over switch of 250 Amps for bypassing of AMF Panel -01 No Outgoing:- (i) MCCB 100 Amps four pole 25 KA-01Nos (ii) power contactor 100 Amps four pole AC1 duty with 2 NO and 2 NC Aux block coil voltage 220VAC -01 No (iii) SMPS 12Volts DC 10 Amps -01 No (iv) Emergency stop Push Button -01 No (v) Digital Ammeter 24 V DC -01No (vi) Digital Voltmeter 24 V DC -01No (vii) Hooter -01 No (viii) Procom Unit(DGC6D) for control -01

Material & Labour for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel strip 25X4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No 5 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoad dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and directed.

Finding and rectification of electrical fault byChecking of external/internal elect supply feeder, street light feeder,OH conductors /under ground cables using elect tools, equipments and safty devices after arranging elect shut down of feeders from sub station to remove elect faults like tightning of loose connection,removing of any electric short,meggring of cable,excavation of soil for removing of faulty cable on a particular span and relaying of cables after removing of fault, re-tightning of cable lugs etc all as required at site and as directed by Engr in Charge. Note:- (i) The electrician employed for the purpose will be highly skilled along with one mate and should have all necessary tools and safty devices. (ii) Any major materials used for rectification of faults like Cables,MCB/MCCB/cable jointing kits/cables of any type etc will be measured and paid seperately or supplied by department. (iii) Rate including hire of HT fault Locaterany other tools/equipments and Earth Work. works should be completed with in 12 hrs Note:- 1. Contractor will provide 1 Electrician and 1 Helper alongwith Tools and Wheel Ladder and other item reqd to attend the complaint on daily basis to attend the complaint on all working days. 2. A register will be maintained and submit with GE alongwith RAR.

C SRINIVASAN

EVEREST ENGINEERING WORKS

AM BUILDERS

rc enterprises