Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.0 LAccepted-AOC 32 23 A N C B LANE P O KHAGRA P S BERHAMPORE DIST MURSHIDABAD PIN 742103 WEST BENGAL | BERHAMPORE | MURSHIDABAD | WEST BENGAL | 742103 | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹28.4 L+₹37,874 (1.35%)Rejected-AOC DANGALPARA P O P S SURI BIRBHUM PIN 731101 | SURI | BIRBHUM | WEST BENGAL | 731101 | L2 | Rejected-AOC Being L2 Bidder | |
| 3 | L3₹28.7 L+₹75,624 (2.70%)Rejected-Finance INDIRA HATIA BIRBHUM | BIRBHUM | BIRBHUM | WEST BENGAL | L3 | Rejected-Finance Being L3 bidder |
Tender Value
Refer Docs
EMD Value
₹55,984
Closing Date
26 Aug 2022, 12:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer,PWD Electrical
Laldighipara, P.O. Suri Dist. Birbhum. Pin. 731101 Near Suri Sadar Hospital
Electrical works at Khustigiri Dargah sharif, Illambazar, Birbhum.
2022_WBPWD_393609_1
BIRED/15/e-NIQ (1st call) of 2022-2023
Open Tender
ELECTRICAL WORKS ORG
Item Rate
30 days
Bolpur
Please refer Tender documents.
8 documents required · 8 mandatory
₹55,984
O/O the Executive Engineer,Birbhum Electrical Divn
22 Dec 2022
5 Aug 2022
29 Aug 2022
5 Aug 2022
26 Aug 2022
10 Aug 2022
10 Aug 2022
120 days
Amount
Supply and delivery of 8.5 Mtr long swagged type steel tubular poles made of M.S. E.R.W pipes and manufactured as per IS 2713 (Part II) 1980 and IS : 1239 with the latest amendments. The designed specification of the pole will be as per 410 - SP -23 (75Kg) [Make- Calcutta Pole/ Utkarsh/ JINDAL][NS]
Erection of Single Steel tubular pole of length as given below with sole plate & Cap etc. in CC foundation (Proportionand dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhamametal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finishand GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properl Upto 9.0 mtr. Size 0.6x0.6x1.70 mts [ 1(a) / H-1 ]
Supply and delivery of 2 Mtr long mini pole of 50mm dia GI PIPE with sole plate(size-250x250x6mm) including fabrication ,requried size reducer with necy fitting for fixing the light fittings,painting of two coat(colour) as per direction of EIC. [Make- JINDAL][NS]
Erection of 50mm dia GI mini pole of length 2 Mtr with sole plate in CC foundation (Proportionand dimension indicated below), having 375x375x150 mm thick CC (4:2:1) base block of sole plate with hard jhama metal including CC (6:3:1) muffing 0.40 mts. dia and 0.40 mts. above ground level including 3 mm thick neat cemented finishand GI earth bolt after making drilled holes etc. on pipe . Incl. S & F of 32A 4 stud bakelite connector,6A porcelin fuse, GI loop box of size 200 x 150 x 100 mm in muffing and filling up the excavated earth pit with shifted soil and ramming properly for 2.0 mtr.long GI PIPE. Incl. GI reducer with necy fittings .
Supply of round bracket 1 Mtr. X 48 mm. dia hollow circular pipe(m) for 4 nos. of flood light fittings special type fixing arrangement on fixed pole, with 2 nos cross arm of size 1 mtr long including sleeve size 450mm x 100 mm dia including painting[NS]
Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9.0 mtr. long pole [7(A)/H-2] One coat of red lead/Zinc chromate priming
1st coat of synthetic enamel paint over the primer
2nd coat of synthetic enamel paint over the 1st coat
Painting Block Letters or Digits within a circle/square as required, with ”Black Japan” paint of approved make & brand, the size of letters and digits as given below Size 40mm and upto 50 mm[6(a)/H-2]
Supply of multistranded PVC/A Al. cable( Make-Gloster/Polycab/KEI/RR kable) 4 Core 10 Sqmm [For Security Light & Bollards & Boundary Lights only]
2 Core 6 Sqmm[For Minar Light]
Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.[2(b)/F-1]
Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed [1(a)/F-2]
Laying of two cables upto 35 sqmm in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed [2(a)/F-2]
Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting[2(a)/F-1]
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 4 Core 10 Sqmm [7(a)/F-4]
2 Core 6 Sqmm
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials 4 ore 10 Sqmm [8(a)/F-5]
2 Core 6 Sqmm
Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting 250 x 250 x 100mm [16(b)/i-2]
Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required 32 mm dia [11(b)/F-6]
40 mm dia
Excavation of soil for installation of Earth Electrode and filling & ramming as per GS [ For Morum Soil] [1(b)/G-1 ]
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm diax 80 mm long GI bolts, double nuts, double washers incl. S &F 15 mm dia GI pipe protection (1 Mts. long) to be filled withbitumen partly under the ground level and partly above groundlevel driven to an average depth of 3.65 Mts. below the groundlevel as below:[ 2(a)/G-1] ISI Medium
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages4 SWG[5/G-2]
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required [4(a)/G-2]
Supply of 120 Watt or higher Flood light Fittings Smartbright Flood with pressure die cast housing and multiple lumen packs and CCT suitable differnet application long life ( IP-65,Surge Protection )Lumen at least 115/120 lumen/Watt [(Make-Crompton/Philips/Jaquar/Havells]) (Cat. No.LFLN-120-CDL/60)/Similar model [For Security Light & Sitting Area] [NS] As per choice of EIC
Fixing only Floodlight Fitting with suitable tie clamps and MS platefor mounting on Pole/Tower or similar structure.[20(a)/C-3]
Supply of LED Post top light fittings with IP 65 protection[Make: Crompton/jaquar/Havells](Cat.No. LPTM 40 CDL,Nebula)/similar model [At Dargah Campus Entry Area] [N.S]
Fixing only post top lantern with suitable tie clamps and MS plate for mounting on column or similar structure with necessary arrangemnt as per direction and choice of EIC.[NS]
Supply of 50 Watt or higher Flood light Fittings(Warm White) Smartbright Flood with Pressure die cast housing and multiple lumen packs and CCT suitable different application long life(IP-65,Surge Protection)Lumen at least120 lumen/Watt[(make-Crompton/jaquar/ HAVELLS) (Cat.No. CFS-504-50-30-60D-SL-GL-NSG)/silmilar model [From Inside of Dargah Gate][NS]
Fixing only Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required[c-3/20(b)]
Supply of 9 Watt Spot light specially designed for commercial usage Long life greater than 30000 burning hours with CRI>80 with 4000K CCt. Beam angel 360,Vertical Tilt 300 [Make-Havells (lycus led spike light/Crompton/jaquar] [Cat No. LYCUSSPS9WLED730PSYMBOTG] [From inside of Dargah Gate]
Fixing only LED Spot Light fittings at different locations of the Dargah Gate with suitable tie clamps and MS Plate/other requisite materials for mounting on column/wall/base of the dome and minnars or similar structure with necessary arrangement with mending good the damages as per direction and choice of EIC.[NS]
Supply of 10 Watt LED outdoor up-down light specially designed for commercial usage Long life greater than 30000 burning hours with CRI>80 with 3000K [Make-Crompton/jaquar/Bajaj][Cat No. LUPDN-10-WW] [From inside Dargah gate]
Fixing only LED wall Lightfittings at different locations of the Dargah Gate with suitable tie clamps and MS Plate/other requisite materials for mounting on column/wall/base of the dome and minnars or similar structure with necessary arrangement with mending good the damages as per direction and choice of EIC.[NS]
Supply of One number of 20 Watt Replacable LED lamp fitted in the Moon Prismatic Decorative Gate light outdoor type fitting [Make-Havells -LHFXBON1TN6F035]/similar model [NS]
Fixing only LED (prismatic)wall Lightfittings on existing GI pole with suitable head reducer and other requisite materials as per direction and choice of EIC. [NS] [at Dargah Boundary Wall and Gangagore]
S& F of a fabricated Timer setup containing 1 No. of FP Isolator(Cat No. BF406300) (Make-L&T)at the input of Circuit, 1 No.of digital Time Switch -Crono Tm (Cat No. AUTS02DIG00) supply 110-240 VAC, 50/60 Hz 1c/O,16 A(NO) and 5 A (NC) @ 240 VAC/24 VDC [Make L&T], 1No. Of MNX Contractor (Make-L&T) ,1 No. of DP MCB C- Curve(Cat.No.BB20400C) 40 Aat the output of the circuit all fitted in the similar manner in 18 Way SPN DB (IP-54) (Make-L&T) (Cat.No.DBSPN01854),an additional Toggle switch for bypass arangement , an LED indicator for easy detection and 15 A DP Switch for manual operation. [NS]
SITC of 1.1 Ton split type A.C. machine having the following specification & feutures:- a) Cooling capacity Maximum(BTU/HR):-13500 for Mitsubishi b)Star rating- 3 Star . c)Rated voltage-220V+/-5% Frequency-50Hz d) Compressor type:Rotary e)Air Flow rate (Cubic Meter/Hr.) -750 . f)Refrigrant-R410A g) Cordless remote control arrangement with all modernize Provision of temperature setting, fan speed option(Low/Medium/High), auto swing. With 15A plug top, 2mt long input cord ,& all other installation kit, out door unit will be fixed on wall with heavy type wall base. Incl supply of wall base/on floor with necessary iron chair (300mm hight). fixed on roof floor as per instruction of EIC. h) The PCB board Of indoor unit should be cover by metallic enclosure (Make-MITSUBISHI Heavy Duty Model No. SRK13CRS-S6/A /O' General)[As per Choice of EIC) [NS]
Supply & fixing of 18mm &8mm heavy gauge copper pipe line from indoor unit to outdoor unit including of keno foam insulation of electrical line from indoor unit to outdoor unit with 4 X 2.5 Sq.mm copper wire cable [NS]
Supply & fixing 19mm dia nylon reinforced 40 PVC pipe for Drain out the water from cooling unit as per choice of EIC. [NS]
Supply, fixing of M.S. Safety Net Guard for Outdoor unit of 1.5 ton Split type A.C. machine made with 25 mm X 25 mm X 6mm thick M.S.Angel & 19mm X 6mm M.S.Flat bar of base size-1260 mm X 1100 mm X 750mm width, covering with square M.S.Net & complete painting with two coats of metal primer and two coats of ICI Synthetic enamel , fixing the same on outer wall by c.c & plastering the same to the original finish and supply of Lock & Key set. [N.S]
S& Fixing of PVC DRAIN PIPE for collection of discharged water from AC machines. Individual AC drain pipe to be terminated at the larger dia PVC drain pipe.[NS] PVC AC Drain pipe of Dia 25 mm to be palced on wall Horizontally[NS]
PVC AC Drain pipe of Dia 40 mm to be palced on wall vertiacally [NS]
Designing, fabrication, supply, installation, testing & commissioning of outdoor type LED sinage (approx. size 25ft X 4ft = 100 sqft ) in Bengali or English (Letter given and exact size of the LED sinage to be approved by concerned Authority) for letter with following specification. a) The box for sinage will be fabricated in all GI square tube of size of 25mm x 25mm 16 SWG gauge complete with necy. Priming & painting. The front of the box will be covered with 3 mm thick Al. composite Panel (ACP) sheet of the entire board. The board to be fixed in front of canopy by providing required support & angle bracketing. The composite installation will be water, vermin and dust insulated and protected. b) Letter description approx. 30" x 15" size of letter made of acrylic sheet with male female attachment on router cut ACP sheet of front incl. all accessories as required. c) LED Based bright illuminition closed type water proof white LED module (1.2 W) mounted on interior side of female part of letter with power wire running back to central power area with 600 watt 12V LED power transformer to adequately drive the whole LED module without flicker. d) Internal electrical wiring will be done by frame retardent compound insulated (unsheathed) 3 core 1.5 sq.mm copper flexible cable as required through interior conduit and electrical raceway. [NS] Note:- Labour welfare Cess @ 1% and GST @ 12% on Bill amount will be deduct on Bill total value
RIK ENTERPRISE
B M ELECTRIC
technical_771605.pdf
PDF • 0.21 MB
techsummary_771605.pdf
PDF • 0.23 MB
finance_771605.pdf
PDF • 0.22 MB
BOQ Comparative Chart
xlsx • 0.01 MB
finsummary_771605.pdf
PDF • 0.42 MB
20221222201013980.pdf
PDF • 0.43 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .