REPAIR REPLACEMENT OF OLD U S LT CABLE LT POLE PANEL FEEDER PILLER BOXES BUS BAR MCCBS AND OTHER CONNECTED ACCESSORIES IN 4 AREA UNDER GE AF ADM AREA KHERIA AGRA

Amount

Excavation in trenches in soft/loose soil n.exc 1.5m wide and n. exc 1.5m depth for laying of cable, errection of poles, stay and pipe line,and getting out complete all as specified and directed

All are as per Item No 1.00 here-in-before but depth exc 1.50 m & n. exc 3.0 m.

Returning & filling including spreading, leveling watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified.

Removal of excavated soil to a distance n. exc 50 m above the starting point complete all as specified.

Taking out old serviceable/unserviceable LT UG cables of size 10 to 70 Sq mm 3.5/4 Core from trenches, poles/walls and floor including taking out old unserviceable/serviceable bricks covers/GI pipe of any size from trenches for removing or re-laying (after necessary repair/jointing) the cable all as directed

Taking out old serviceable/unserviceable LT UG cables of size 95 to 300 Sq mm 3.5 Core from trenches, poles/walls and floor including taking out old unserviceable/serviceable bricks covers/GI pipe of any size from trenches for removing or re-laying (after necessary repair/jointing) the cable all as directed

Supply and Laying in replacement of XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of 16 Sq mm 4 core in trenches or fixed on wall/floor/poles complete all as specified and directed.

Supply and Laying in replacement of XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of 25 Sq mm 4 core in trenches or fixed on wall/floor/poles complete all as specified and directed.

Supply and Laying in replacement of XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of 35 Sq mm 3.5 core in trenches or fixed on wall/floor/poles complete all as specified and directed.

Supply and Laying in replacement of XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of 50 Sq mm 3.5 core in trenches or fixed on wall/floor/poles complete all as specified and directed.

Supply and Laying in replacement of XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of 70 Sq mm 3.5 core in trenches or fixed on wall/floor/poles complete all as specified and directed.

Supply and Laying in replacement of XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of 95 Sq mm 3.5 core in trenches or fixed on wall/floor/poles complete all as specified and directed.

Supply and Laying in replacement of XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of 120 Sq mm 3.5 core in trenches or fixed on wall/floor/poles complete all as specified and directed.

Supply and Laying in replacement of XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of 150 Sq mm 3.5 core in trenches or fixed on wall/floor/poles complete all as specified and directed.

Supply and Laying in replacement of XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of 185 Sq mm 3.5 core in trenches or fixed on wall/floor/poles complete all as specified and directed.

Supply and Laying in replacement of XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of 240 Sq mm 3.5 core in trenches or fixed on wall/floor/poles complete all as specified and directed.

Supply and Laying in replacement of XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of 300 Sq mm 3.5 core in trenches or fixed on wall/floor/poles complete all as specified and directed.

Re-Laying XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminium conductor of 10 to 70 Sqmm 3.5/4 Core (Item retreived from item 05.00 here-in-before) laid in trenches or fixed on wall/floor/poles complete all as specified and directed.

Re-Laying XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminium conductor of 95 to 300 Sqmm 3.5/4 Core (Item retreived from item 06.00 here-in-before) laid in trenches or fixed on wall/floor/poles complete all as specified and directed.

M&L for laying of bricks locally available sub class 'B' bricks (old size) for cable protection cover laid flat and dry in trenches over the cable prependicular to the direction of cable all as directed.

Re-laying of old serviceable bricks for cable protection cover laid flat and dry in trenches over the cable prependicular to the direction of cable all as directed.

M&L for local sand coushioning with dry and clean over and under the cable for protection of cable , 80 mm sand laid before laying the cable 150 mm sand after laying the cable and filling the sand in cable duct of inside the sub station building complete all as directed

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out and dressing wild growth cutting in soft and loose soil complete once in a three months including cleanging 11KV/0.433 KV Sub Stn Room taking proper shut down all as specified and directed. (Measurement shall be recorded at every cutting/dressing and paid)

M&L for drilling suitable dia horizontal bore holes for insertion / laying of 50/100 mm bore GI tubing of any description below/under road surface/floors etc with using mechanical or manual devices as required at site including making good disturbed surface to match with the existing streta after laying pipes complete all as specified and directed

Supply and fixing in replacement of GI tubing light grade of 100 mm dia for cable protection on pole/wall/floor/ or in trenches and drain etc complete with necessary clamp, nut, bolts and washers and socket and making good the disturbed surface of wall , floor or roof etc all as specified and directed,

Supply and fixing in replacement of GI tubing light grade of 50 mm dia for cable protection on pole/wall/floor/ or in trenches and drain etc complete with necessary clamp, nut, bolts and washers and socket and making good the disturbed surface of wall , floor or roof etc all as specified and directed,

M&L for jointing kit suitable for LT 1100 Volts cable (earthed) for out door straight through joint , heat shrinkable type complete with jointing material and accessories suitable for 25 to 50 Sqmm 3.5 core XLPE armoured aluminium conductor cable complete all as specified and directed.

M&L for jointing kit suitable for LT 1100 Volts cable (earthed) for out door straight through joint , heat shrinkable type complete with jointing material and accessories suitable for 70 to 150 Sqmm 3.5 core XLPE armoured aluminium conductor cable complete all as specified and directed.

M&L in replacement Bus Bar Panel of capacity 400 Amps copper bus bar 04 Nos with fixed on insulator welded with iron angle of size 50x50x6 mm thick grounting in floor , 0.45 mm depth grounting with PCC 1:3:6 type C-1 upto ground level all as specified and directed. Cat Part No IHBC040004 of Make-Havells or equivalent in Legrand/L&T

M&L in replacement Bus Bar Panel of capacity 250 Amps copper bus bar 04 Nos with fixed on insulator welded with iron angle of size 40x40x6 mm thick grounting in floor , 0.45 mm depth grounting with PCC 1:3:6 type C-1 upto ground level all as specified and directed. Cat Part No IHBC025004 of Make-Havells or equivalent in Legrand/L&T

M&L in replacement Bus Bar Panel of capacity 200 Amps copper bus bar 04 Nos with fixed on insulator welded with iron angle of size 40x40x6 mm thick grounting in floor , 0.45 mm depth grounting with PCC 1:3:6 type C-1 upto ground level all as specified and directed. Cat Part No IHBC020004 of Make-Havells or equivalent in Legrand/L&T

M&L in replacement Bus Bar Panel of capacity 100 Amps copper bus bar 04 Nos with fixed on insulator fixed on pole with bracket made out of FI of size 25x3 mm -02Nos including providing new nut, bolt & washers all as specified and directed. Cat Part No IHBC010004 of Make-Havells or equivalent in Legrand/L&T

Material & labour pin type porcelain, vitreous, white, brown or green insulator including one GI nut bolt 100 mm height 65 mm dia for 1100 Volt complete including taking down old unserviceable insulator all as specified and directed.

Material & labour Shackle type,porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts for 1100 Volt 100 mm height & 115 mm dia with GI straps 31x5 mm & dia of volt 14 mm complete including taking down old unserviceable insulator all as specified.

M&L for PCC type B1 (1:2:4) with 20 mm gradded stone aggregate for poles bed/mass concrete of poles complete all as specified and directed.

Supply and fixing in replacement of MS Chequered plate of 5 mm thick or over in thickness in available of Fe - 290 Gde E165 and fixed in substation building including making provision for lifting the plate from duct complete all as directed.

M&L for PCC type C1 (1:3:6) with 20 mm gradded stone aggregate for copping of poles complete all as specified and directed.

Dismantling and taking out old serviceable/unserviceable Steel tublar pole of any size or type complete all as directed.

Supply, erecting and fixing in true vertical position, steel tubular swaged pole (410 SP – 31), 09 meter long, complete with cast iron base plate, pole cap / finial taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole including 2 coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided with one coat of red oxide primer and two coats of aluminium paint complete all as specified and directed by Engineer-in-Charge.

M&L for MS cross arm , bracing supports , clamps and back plate fabricated from structural steel sections holding nut,bolts and washers including necessary welding , bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclisive two coat of synethetic enamel paint over a coat of red oxide primer complete all as directed.

Disconnecting of GI earthing strips/earth wire leads of any size, any description and in any postion from test point carefully and testing the earth resistance of any type of earthing with the help of earth tester of suitable capacity and recording Ohm value in the register as per proforma approved by Engineer-in-Charge including cleaning vegetation/wild growth sorrounding the earth pit and removing dust/deposited soil from earth pit. NOTE :- (i). The contractor will arrange Earth Tester, all T&P & accessories for recording the reading. (ii). The contractor shall arrange for watering of the earth pit through watering pipe in the earthing to improve the resistance. The common salt min 10 Kgs for each earthing pit shall be mixed with the water at site and filled/dropped in earthing through warering pipe as per site condtion, The contractor shall make his own arrangement for drawing water for earthing pit. (iii) Testing of the earthing shall be carried out periodically as directed by Engr-in-Charge as per site requirement and unit rates quoted by the Contractor for all the material and arrangements shall be deemed to include for all the provisions for testing of the earthing for one time."

S & F in replacement of MCCB 400 Amp current carrying capacity, 36 KA, AC 415 Volt , 4 pole, with electric adjustable type ICS = 100% ICU setting complete all as specified and directed. Make : Legrand cat part No DPX3 422143 or equivalent in Seimens/ABB)

S & F in replacement of MCCB 250 Amp current carrying capacity, 25 KA, AC 415 Volt , 4 pole, with electric adjustable type ICS = 100% ICU setting complete all as specified and directed. Make : Legrand cat part No DPX3 420539 or equivalent in Seimens/ABB)

S & F in replacement of MCCB 200 Amp current carrying capacity, 25 KA, AC 415 Volt , 4 pole, with electric adjustable type ICS = 100% ICU setting complete all as specified and directed. Make : Legrand cat part No DPX3 420218 or equivalent in Seimens/ABB)

S & F in replacement of MCCB 160 Amp current carrying capacity, 25 KA, AC 415 Volt , 4 pole, with electric adjustable type ICS = 100% ICU setting complete all as specified and directed. Make : Legrand cat part No DPX3 420537 or equivalent in Seimens/ABB)

S & F in replacement of MCCB 100 Amp current carrying capacity, 16 KA, AC 415 Volt , 4 pole, with electric adjustable type ICS = 100% ICU setting complete all as specified and directed. Make : Legrand cat part No DPX3 420015 or equivalent in Seimens/ABB)

S & F in replacement of MCCB 63 Amp current carrying capacity, 16 KA, AC 415 Volt , 4 pole, with electric adjustable type ICS = 100% ICU setting complete all as specified and directed. Make : Legrand cat part No DPX3 420013 or equivalent in Seimens/ABB)

Re-Streching (without taking down ) of existing ACSR conductor including cradles and earth wire of any description of any size on LT /HT poles including binding the ACSR with insulator and tightening of conductor / earth wire in position , removing sag and making the jumper connection with new aluminum binding wire etc complete all as specified and directed

Supply and fixing of ACSR conductor on HT/LT over line of weasel 6/1x2.59 and tightening on existing HT/LT over line including binding with insulator with new binding wire including dismantling old unserviceable ACSR conductor of any size complete all as directed.

M&L for GI wire of 4 mm dia for earth continuity or cattle cradles on LT/HT over head line complete all as specified and directed.

M&L for danger notice plate of 1.6 mm thick mild steel sheet viterous enamelled white with letters figures and conventional skul and bones in signal red colour and fixed with MS clamps , bolts, nuts and washers of approved size for LT , 415 volts of size 20 cm x 15 cm complete all directed

Supply and fixing PVC insulated heavy duty electric cable un armoured with standard aluminium conductor 2 core 10 sq mm complete all directed

M&L for PVC seprator for LT over head line suitable for 2 wire and 3 wire sytem and fixed LT OH lines comlete all as specifed and directed

M&L for repair /replacement of damaged LT panel section of front/back/side /top and bottom portion of any size MS sheet with new of required size or thickness and fixing on existing LT panel board including necessary bracing/welding work and drilling works including necessary hinges and two coat of synethetick enamel paint over a coat of red oxide primer complete all as specified and directed.

Prepration of old painted surface of steel tubular poles of 9 mtr long including cross arms , cable protection pipe , bus bar box and painting of complete area with one coat of aluminum paint from 1.5 mtr above ground level to top of pole and a height of 1.5 mtr from the ground level synethetic enamel paint in alternate strips / layer (30 cm wide) with white and blue colour including writing the pole number in white letters on black background and cleaning /cutting the grass/bushes at a radius of 2 mtr surrounding the pole all as directed.

Supply and fixing in replacement of aluminium bus bar of any size or length and fixed on exisitng panle board including necessary drilling bracing providing colour code sleeves on bus bar complete all as specified and directed.

Triming/cutting of tree branches upto three meter all round. The HT / LT over head line, removing cut branches from site not more than 50 mtr distance all as specified. Note:- Necessary permission will be obtained from department by contractor one day prior to trimming in perticular area and shutdown of that area shall be arranged by department.

Supply, Installation and commissioning in replacement of control unit with with cubical type enclosed in sheet steel air circuit breaker AC 415 Volts, 50 Hz, 4 pole, 630 Amps current carrying capacity micro processor and comprising the following :- (i)withdraw able version ACB 415 Volts, 4 pole, 630 Amps capacity.. (ii)Indipendent manual spring closing mechanism - 01. (iii) shunt opening closingrelease-01. (iv) kiosk box / enclosure shall be included unit rate (v) Racking in and out handle (vi) CT 600/5 one set (vii) Safety shutter. Make: Legrand Cat Part NoDMX3 (MP4)-028730+028802+028885, or equivalent model in Siemens / Schneider.

Servicing of LT indoor cubical panel, to check the main incoming LT ACB of any capacity, set the microprocessor relay as per existing load and replace the unserviceable parts and ensure the performance of ACB, check the incoming and outgoing MCCBs terminals and replace burnt thimples with new, ensure that there is no loose connection on panel, providing cable glands as per required quantity and marking locations of out going feeder complete all as specified and as directed by Engineer-in-charge.

Servicing of LT indoor cubical panel, to check the main incoming LT MCCB , set the thermal relay as per existing load and replace the unserviceable parts and ensure the performance of panel, check the incoming and outgoing MCCBs terminals and replace burnt thimples with new, ensure that there is no loose connection on panel, providing cable glands as per required quantity and marking locations of out going feeder complete all as specified and as directed by Engineer-in-charge.

servicing of feeder pillar box any type removing unserviceable MCCBs, burnt busbars, unserviceable indicator lamps, unserviceable Ammeter, unserviceable Volt meter and fixing proper hanging front and rear openings, replace burnt thimpls with new existing size thimples, providing cable glands as per required quantity and marking locations of out going feeder complete all as directed by Enger -in- charge.

M&L painting of feeder pillar box complete with existing colour one coat of primer and two coat of synthetic enamel paint after preparing surfaces and including testing complete all as directed

Supply and Fixing in replacement of RYB indicator lamp LED type( set of three lamp) for incoming and outgoing supply as per Existing size all as directed

Supplying, installing, testing and commissioing in Replacement of out door type, cubical LT panel board of existing size but not less than 1000x400x1000mm, CPRI approved, factory made, all around powder coated (Siemens grey structural RAL 7032 shade) having minimum thickness 100 microns, suitable for 3 Phase 4 wire, 415 Volts, 50 Hz, AC supply and provided with suitable U type gasket to make it dust / vermin proof & general construction conforming to IS:8623/93, floor block mounting type made out of 3.15mm thick CRCA sheet (outer) and 2mm thick CRCA sheet (inner) with using 50x50x6mm angle iron frame, factory fabricated duly compartmentalized for each control gear with front & back openable, lockable / operatable by keys from both sides having brass chromium plated 19mm dia fancy locks, louvers & air vent gasket for natural flow of air and to accommodate incomer / outgoing MCCBs and TPN copper bus bars of rating 600 Amps. The TPN bus bar shall be insulated with colour coded heat shrinkable sleeves and shall be mounted on suitable size 'F' class insulators made of non hygroscopic , non combustile , track resistant, high strength FRP/SMC/DMC material at an interval not less than 500mm through out the length of the TPN bus bar and extension link shall not be less than 300mm long supported on same type insulators and having provision for all control wires shall be with FRLS PVC insulated unsheathed minimum 2.5 sqmm, multistranded copper conductor and shall be properly bunched, tied, ferrulated for proper identification and crimped with adequate size of copper lugs. The cubical shall have a bottom channel of size 75x40mm duly coated with zinc metal coating having thickness not less than 100 microns. A detachable pre-drilled gland plate of thickness 2mm powder coated should be used at the bottom with and including necessary excavation and earthwork and PCC work type C-1 with and including following accessories and specified here-in-after :-

Supplying, installing, testing and commissioing in Replacement of out door type, cubical LT panel board of existing size but not less than 1000x400x1000mm, CPRI approved, factory made, all around powder coated (Siemens grey structural RAL 7032 shade) having minimum thickness 100 microns, suitable for 3 Phase 4 wire, 415 Volts, 50 Hz, AC supply and provided with suitable U type gasket to make it dust / vermin proof & general construction conforming to IS:8623/93, floor block mounting type made out of 3.15mm thick CRCA sheet (outer) and 2mm thick CRCA sheet (inner) with using 50x50x6mm angle iron frame, factory fabricated duly compartmentalized for each control gear with front & back openable, lockable / operatable by keys from both sides having brass chromium plated 19mm dia fancy locks, louvers & air vent gasket for natural flow of air and to accommodate incomer / outgoing MCCBs and TPN copper bus bars of rating 400 Amps. The TPN bus bar shall be insulated with colour coded heat shrinkable sleeves and shall be mounted on suitable size 'F' class insulators made of non hygroscopic , non combustile , track resistant, high strength FRP/SMC/DMC material at an interval not less than 500mm through out the length of the TPN bus bar and extension link shall not be less than 300mm long supported on same type insulators and having provision for all control wires shall be with FRLS PVC insulated unsheathed minimum 2.5 sqmm, multistranded copper conductor and shall be properly bunched, tied, ferrulated for proper identification and crimped with adequate size of copper lugs. The cubical shall have a bottom channel of size 75x40mm duly coated with zinc metal coating having thickness not less than 100 microns. A detachable pre-drilled gland plate of thickness 2mm powder coated should be used at the bottom with and including necessary excavation and earthwork and PCC work type C-1 with and including following accessories and specified here-in-after :-

M&L for earthing complete with galvanized steel plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 deep below ground level) with top edge of the plate not less than 1.50 m below ground level connected to GI wire 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl excavation and earth work and disposal of surplus soil incl 15 mm GI tubing medium grade and necessary fitting for protection of GI wire incl laying of charcoal dust and common salt PCC (1:3:6) type C-1 earth pit with 40x40x6mm MS angle iron frame, RCC cover 40mm thick (1:2:4) type B-0 reinforced with 6 mm dia round bar @ 75mm C/C both ways with MS handle 12mm dia, plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally, PGI funnel with 20mm dia GI pipe medium grade for watering and wire mesh complete all as specified and shown on electrical plate No 3 of SSR Part (2009) and connected to earth test incl testing complete, including taking down of old GI plate and GI wire/GI strip complete all as specified and directed. Note: (1) After completion of earthing work, the contractor will arrange Earth Tester, all T&P and accessories for recording the reading. (2)The record of resistance value of each earthing along with date of testing should be maintained on register as per format approved by Engineer-in-Charge. (3) the all earthing pits resistance result is must to maintain within site required range. (4) If any material required to improve the earth resitance result, it is al so included the quoted rate.

Description all as per Item No 71.00 here-in-before but using GI strip 32 X 6 mm as earthing lead complete all as specified and directed including taking down of old GI plate and GI wire/GI strip complete all as specified and directed.(Note;-welding full length of GI strip with earth plate after providing nuts and check nuts and washers etc)

M&L test point terminal block made of gun metal or phospherous bronze size 75 X 75 X 25mm drilled and screwed including three nos 8mm dia 25mm long hex head screw complete, including taking down existing UNSV complete all as specified and directed.

M&L GI strip 32 X 6 mm with PVC saddles and screws etc for fixing strips on wall/floor complete, including taking down existing UNSV complete all as specified and directed.

M&L GI wire 4 mm dia with PVC saddles and screws etc for fixing strips on wall / floor including taking down existing UNSV complete all as specified and directed.

M & L for recasting of broken / damaged PCC earth pit chamber complete all as specified and shown in SSR Part -I( 2009 )

M&L in replacement of earth Test result indicator made out of MS plate 20 CM x 15 CM with MS leg of suitable length and dia as per existing including painting it with black / yellow synthetic enamel paint complete all as specified and directed

M&L in replacement of existing UNSV LT PVC insulated armoured heavy duty cable indoor/outdoor end terminal joints (heat shrinkable) any type along pole/panel etc suitable for aluminium conductor cable and testing after jointing complete of following sizes all as specified and directed ( Make:- Denson / Raychem / Birla 3 M) :-- (a) 240 sq mm 3.5 core to 400 sq mm 3.5 core

(b) 120 sq mm 3.5 core to 185 sq mm 3.5 core

(c) 50 sq mm 3.5 core to 95 sq mm 3.5 core

(d) 10 sq mm 4 core to 35 sq mm 3.5 core

(e) 10 sq mm 2 core.

M&L for replacement of existing UNSV Installation name Board/Sign Board with the size of 4 X 3 feet of PVC fibre sheet Board of 6 mm size heavy duty incl, writing Alphabatic letters computerised with reflectioned sheets to be made all as directed of size 150 mm fonts and fixed with stainless steel pipe heavy duty of size 40 / 50 mm dia and to be fixed out side the installation duly buried in ground along with required PCC and Top of the sign Board should not be less than 2.5 mtr complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar complete all as specified and directed.

M&L cement concrete in foundations, filling and mass concrete of type B2 1:2:4 (40 mm graded aggregate) complete all as specified and directed.

M&L brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surface complete including two coats of white wash after preparation of plastered surfaces of walls complete all as specified and directed.

M&L preperation of new plastered surface and painting with synthetic enamel paint over a coat of primer complete all as specified and directed

M&L in replacement for synthetic Insulating mat of size 2m x 1m x 10mm thick complete all as specified and directed

M/s S.M. Construction

H.S.Kochhar n Sons

M/s Yash Trading Company

Balaji Associate

CHAHAR CONTRACTOR AND SUPPLIERS

M/s M S Sharma and Co.

AGRA AND COMPANY

TRIVENI ASSOCIATES