SPL REPAIR TO REPLACE THE ROOF OF BLDG NO P 47 CLASSROOM OF AGNIVEER AT 6 TTR PONDA

Amount

Taking down cement plaster of any description on brick or stone walls including racking out joint hacking for key, scrubbing down with water etc.

M&L for 15mm thick rendering in CM 1:6 on brick or concrete surfaces of wall , finished even and smooth without using extra cement.

M & L for applying two coat of oil emulsion distemper over a coat of chalk whiting as preparatory to distemper including preparation of new surface or unplastered surfaces of wall with applying 3mm thick wall care putty complete all as specified and directed.

M & L for applying two coat of oil emulsion distemper over a coat of chalk whiting as preparatory to distemper including preparation of old decorated surfaces of wall with applying 3mm thick wall care putty by complete removal of existing treatment complete all as specified and directed.

Material and labour for rendering 15mm thick plaster in cement mortar 1:4 on external surfaces such as brickwork or concrete surfaces with using water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. (Water proofing compound shall be measured and paid for separately)

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.complete all as specified and directed by Engr-in-charge.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces including complete removal of existing treatment complete all as specified and directed by Engr-in-charge.

Supply only liquid water proofing compound all as specified.

Dismantling single layer Mangalore pattern or similar tiles in roofing

Dismantling battens for tiles, shigles etc, spaced exc. 15 cm of any size including tiling fillets.

Dismantling framework timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.

Dismantling framework timber in fillets, rails, posts, rafters, purlins, etc. over 40 sq. cm in section complete all as specified and directed.

Taking down roof trusses span 4m to 8m coupled rafters or trussed beams complete.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded in concrete brickwork and masnory portion and making good disturbed ground

Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface all as directed

Cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete all as directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings and in chajjas complete.

Dismantling wrought iron or mild steel work of any (Chajja bracket) description not otherwise provided complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugate steel sheet 0.50 mm thick of an colour having Tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Ditto all as item 19 above but plain steel sheet 0.5mm thick.

S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc conforming to Fe 410-W(Gde-E-250)

S & F rolled sections as in main and cross beam hips and jack, rafters, purlins where connected to common rafters and running rail and guide for sliding doors fixed with angle cleats Fe 290-W(Gde-E-165)

S & F compound girders and stanchions lattice girders aerial masts, staging for water tank and like including cap and bases , splices etc built up from two or more beam or channel section or angle with plates including all lattice bars stifferners, gusset plate. Fe 290-W(Gde-E-165)

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description, over 10cm in width or girth complete all as specified and directed.

Demolition of brick work or stone/boulder masonary, built in cement mortar including all quoins,arches,pillars,etc. complete all as specified and directed by Engineer in charge.

M & L for walling laterite of squared rubble, regular coursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed by Engineer in charge. (Note -The rate consider is for laterite stone only as per section No.6 stone masnory para - 6.2.4 of SSR 2010)

M & L for 15mm thick plastering in CM 1:4 on external surfaces stone or concrete surfaces at any height finished even and smooth without using extra cement complete all as specified and directed.

Extra over stone walling for hammer dressing to face stone and dressing of face beds and joints, as specified, of squared rubble masonry regular coursed, hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 20mm complete all as specified and directed

Demolition wall and ceiling board or insulation board/ slabs/blankets any thickness including cover fillets

Supply and fix anodized aluminium snap grid frame work for false ceiling of grid size 605mm x 605mm Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified directed.

Material and labour for 6mm thick non asbestos fibre cement building boards fixed or laid/ inserted to aluminium frame work with screws complete all as specified and directed.

Dismantling of old ceiling boarding of any description, fixed in any position with screw and re-fixed in flat or sloping 6mm thick asbestos cement plain building boards fixed or laid/ inserted to timberframe or iron frame work with screws, hooks, belding, cliping etc complete all as specified and directed.

Disconnecting and S & F rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I (2000Ltrs) capacity complete all as specified and directed.

Taking down carefully copper/aluminium point wiring of light, fan, socket 5/15A or power point complete including fittings such as switches, bell push,electric bell,ceiling rose, pendant, regulator, socket, lamp holders, brackets, lamp fittings, etc including switch boards and making good disturbed surfaces of wall/ceiling etc so as to match with the existing wall/ceiling/floors etc completely all as directed by Engr-in-Charge.

Taking down carefully sub main wiring including aluminium conductor of any size / GI earth continuity conductor and making good disturbed surface all as directed.

Dismantling old Main Switches/DB with MCBs all as specified and directed including electric meter.

Fixing only, connecting and testing energy meters including all accessories retrieved from item No 3 above

Material and labour for concealed sub main wiring with FRLSH PVC insulated 1100 Volt Grade stranded copper conductor cable with of size 2X 6 Sqmm in PVC conduit of 20/25 mm and one run of 6.00 Sqmm copper earth wire including all necessary connections and fixing arrangements complete

Material and labour for concealed sub main wiring with FRLSH PVC insulated 1100 Volt Grade stranded copper conductor cable with of size 2X 4 Sqmm in PVC conduit of 20/25 mm and one run of 4.00 Sqmm copper earth wire including all necessary connections and fixing arrangements complete

M & L for point wiring with 1.5 sqmm (nominal cross sectional area) single core pvc insulated ,unsheathed FRLSH copper cable ,1100 Volt grade with multi stranded copper conductor drawn through and including non-metallic ,rigid non metallic PVC conduit (medium grade) concealed in walls /ceiling with and including 1.5 sqmm single core PVC insulated multistranded ,unsheathed FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron/ Pressed Steel modular terminal boxes any size/module,concealed on walls and fixed by means of brass screw including modular white cover plates and cover frames any size /module and black plates, for mounting or housing switches ,socket outlets, fan regulators etc incl all other fixing accessories for one light/fan/exhaust fan/call bell point controlled by one 5/6 Amps switch complete including making good of wall surface by cementing/plastering complete all as specified and directed.

(a) One light point controlled by one way switch.

(b) One fan point controlled by one way switch and one regulator.

(c) One Exhaust fan point controlled by one way switch.

(d) One 3 pin switch socket point outlet 5A on independent board.

(e) One 3 pin socket outlet point 5A on same board with other switch

S & F modular Switch 1 way 6 Amp, 1 module.

S & F modular Socket 6A-2/3 pin combined 2 module.

S & F modular fan regulator 120 W - 2 module.

S & F surface ceiling rose made of bakelite of size 65mmx50mm with 3 terminals and PVC block. Ceiling rose will be fixed on PVC block complete all as specified and directed

Supply and fixing LED lights fitting 1x 20W,lumen output >=120 lm/watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V A decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete including making opening by Cutting of Wall and making Good of the surface all as specified and directed.

Supply and fix SPN 8 way double door metallic sheet metal enclosure for DB when MCBs to be used 240 Volts with 200Amps rated bus bar complete fixed properly on/ in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires including blank plate complete all as specified

Supply and fix SPN 4 way double door metallic sheet metal enclosure for DB when MCBs to be used 240 Volts with 100Amps rated bus bar complete fixed properly on/ in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires including blank plate complete all as specified

Supply and fix MCB SP 240volts, 6Amp to 32Amp, 10KA capacity having C-series connected with suitable lugs including testing and commissioning complete all as specified and as directed.

All as per Item no. 50 above but SPN 32 Amp

Taking down ceiling fan, of any size including blade in any position including re-fixing where directed including provision of 3 core flexible cable of suitable size, and cleaning, greasing where required and testing after completion all as specified and directed.

VISHAL M ENGINEERS (BID ID -3307494)

SANTOSH CONSTRUCTION (BID ID -3306763)

SAI ENGINEERS & CONTRACTORS (BID ID -3301135)

BIHARI AND BROTHERS ASSOCIATES (BID ID -3298660)

R.R.Construction.Co (BID ID -3301766)