COMPREHENSIVE MAINT/PETTY REPAIR OF INTERNAL ELECTRICAL COMPLAINTS AND INTENAL WIRING AND CONNECTED ITEMS IN DGQA AREA UNDER GE(I) KANPUR.

Amount

Attending complaints fo checking and replaceing the existing defective electrical items for continuous electric supply including carrying out minor repair as required to make the item functional and replacing fuse, small pieces of copper wire, copper cable as of suitable size at site, insulation tape roll etc. attending minor repair(s) such as testing, connectins, fittings, nut, bolts, screws etc to emergent complaints i.e no light, earth leakage, short circuit, neutral break in mains/sub mains/internal circuits of existing electical system of main building/block and making continuous electric supply including carrying out minor repairs etc.. required to make the system in order/*functional with insualtion tape roll, copper thimbles, glands, earthing wire as required at site complete all as specified and directed by Engineer-in-Charge. Notes :- This item is applicable only where no store is required. 1. The site for attending complaints at DGQA Area, CQA (M&PP) and CQA(T&C) Officers Bunglow. Contractor shall provide minimum one tradesmen (electrician) for each site to attend the complaint in all working days between 0830 hrs to 1700 Hrs including holiday and Sunday. 2. Contractor shall ensure the security passess for his staff, to be obtained from concern authority for attending complaints. 3. The contractor will ensure that the electicians with necessary tools bag shall always remain present at complaint cell to attend the Complaints. 4. A recovery of Rs 500/- for not attending the complaint upto 04 hours and after 04 hours Rs 1000/- shall be recovered from the contractor due 5. All the complaint slip, register & other connected document will be provided by the contractor without any extra cost. 6. Proper record (date wise) of complaints received & rectified by the contractor and the same may be asked for verification at the time of payment of each RAR/Bill. 7. The above tradesmen shall not be utilize for the complaints where material is required and these complaint shall be measured and paid seperately as S&F here in after.

Supply and fix in replacement cable PVC insulated unsheathed with flexible multistranded copper conductor of size 0.75 Sqmm.

All as per item No 2 above but size 1.5 Sqmm.

All as per item No 2 above but size 2.5 Sqmm.

All as per item No 2 above but size 4 Sqmm.

All as per item No 2 above but size 6 Sqmm.

All as per item No 2 above but size 10 Sqmm.

M&L for switch piano flush button single pole one way 5 amps 240 volts

Switch piano flush button single pole one way 15 amps 230 Volts

M&L for socket 5 amps 5 pin flush type, 230 volts.

M&L for socket out let, 6 pin 5 and 15 amps multi purpose 2 in 01 flush type, 230 volts

M&L for switch modular type single pole one way 1 module 6 amps 240 volts.

Switch modular type one way 1 module 16 amps 230 Volts.

M&L for socket 6 amps modular type 2/3 pin combined 2 module , 230 volts as per sample.

M&L for socket modular type , 2/3 pin, 6 and 16 amps combined 2 module, 230 volts. as per sample..

S & F modular white cover plate with frame 2/3 module all as specified and directed. as per sample.

S & F modular white cover plate with frame 4 module all as specified and directedas per sample.

S & F modular white cover plate with frame 6 module all as specified and directed as per sample.

S & F imodular white cover plate with frame 8 module all as specified and directedas per sample.

S & F modular white cover plate with frame 12 module all as specified and directed.as per sample.

M&L for ceiling rose surface bakelite 3 terminals

S & F Lamp holder insulated body with back plate for dome batten fittings.

Supply and fixing in replacement fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required or directed by engineer-in-charge.

Supply and fixing in replacement modular regulator as per sample all as required or directed by engineer-in-charge.

Supply and fixing in replacement plug top 3 pin 16 amps AC 240 Volts all as directed by Engr-in-Charge.

Supply and fixing in replacement plug top 3 pin 6 amps AC 240 Volts all as directed by Engr-in-Charge.

Supply & fix in replacement hylem sheet cover 3 mm thick of size 7"x4" all as required at site including drilling holes for fixing screws and providing 4 Nos screws with washers for fixing the sheet to sunken box /wooden box.

All as per item No-27 above but of size 8"x10" .

All as per item No-27 above but of size 11"x9".

All as per item No-27 above but of size 13"x11" .

S&F in repair sunken box size 8"x10" and making good disturbed surface to match with the existing surface of wall by applying putty and applying colour / white wash finish complete all as specified and directed.

S&F in repair sunken box size 7"x4" and making good disturbed surface to match with the existing surface of wall by applying putty and applying colour / white wash finish complete all as specified and directed.

M&L for sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and socket 25 amps 240 volts, complete with one single pole MCB of 25 amps earthing.

Supply and fix sheet metal enclosure MCB distribution board, double door with IP-43 protection with acrylic cover single phase 240 volts 4 way, including suitable size copper bus bar and neutral link of make Legrand or equivalent of make Havells/L&T fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .

All as per srl item No 34 above but for 8 way.

M&L for MCB single pole 240 volts 5 to 30 amps, with rupturing capacity 10 KA using thimbles of required size.

S & F MCB SP 63 Amps, 10 KA, 'C' Series

M&L MCB single pole & neutral 240 volts 32 amps,with rupturing capacity 10 KA using thimbles of required size.

All as per item No 38 above but of size 63 Amps.

S & F MCCB 125 Amps capacity, 4 pole, 16 KA, fixed thermal and magnetic release complete with extended terminals to be fixed in 8 way TPN DB complete all as specified and directed. Make : ABB/Legrand/Indo Asian/L&T

All as per item No. 40 above but capacity 100 Amps, fixed thermal and magnetic release, 4 Pole, 16 KA suitable to be fixed in 4 way TPN DB complete all as specified and directed. Make : ABB/Legrand/Indo Asian/L&T

Supply and fixing 10W surface mounted IP65 Bulkhead with system efficiency of 100LM/Watt LED bulk head shall be made up of Die cast Polycorbonate diffuser with silicon gasket for better heat decapitation.P.F>.95with THD <10%,surge protection 4KV input voltage rane 150Vto 270V including connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as required.

"Supply, install, test and commissioning of All -In- One Solar Street Lighting Luminaire of capacity 20 W Microprocessor based with Self contained solution i.e. Light on/off controlled by automatic daylight sensing including Earthwork excavation, Removal of Soil and PCC 1:2:4, Type B1 as in Filling / Foundation for fixing of Pole with IP 66 protection complete Make : Havells/Bajaj / Crompton Greaves / Tata BP Solar and consisting of the following: [a] Mono crystalline solar PV moduel. [b] PVC Coated Galvanised Pole of 5-6 m long of 4mm wall thickness [c] Solar System Power Consumption: 20 Watts [d] Back up : 24 hourse with diming. [e] Battery Capacity 12.8 V DC, 24 Ah, LFP, with inbuilt BMS techonology. [f] Solar Charge Controller: Microprocessor based MPPT Charge Controller [g] LED 20W Luminaire in Powder Coated Aluminium extruded body. Note: Solar Street Light Luminaire shall be MNRE approved. "

Supply and fixing in repair surface and wall mounted LED Tube light & fitting 20 watts, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with provision PVC copper wire 1.5 sq mm 3 core of required length upto ceiling rose complete all as specified and directed.

S & F distribution board iron clad, double door with IP-43 1K-09 protection(VTPN) suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link, with one MCCB 4 pole 415 Volts 100 Amps rating with rupturing cap 16 KA of the same make as of distribution board & with MCBs of required size making connection with thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge.

S & F switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal with complete box all as specifid and directed

S & F switch socket combination 2 in 1, 3 pin,15 Amp flush type universal with complete box all as specifid and directed

S & F Switch socket combination 2in 1, 5 A flush types all as specifid and directed

S & F Switch socket combination 2in 1, 15 A flush types all as specifid and directed

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified.

Point wiring for one light point/fan/bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green color) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size 25mm dia with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size & as directed & 3 mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

All as per srl item No-51 here in above but upto ceiling height and on surface at ceiling.

All as per srl item No-51 here in above but in existing conduit.

All as per srl item No-51 here in above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and incl conduit.

All as per srl item No-51 here in above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in existing conduit.

All as per srl item No-51 here in above but for one 3 pin 5A socket outlet independent controlled by one switch.

All as per srl item No-51 here in above but for one 3 pin 5A socket outlet independent controlled by one switch in existing conduit.

All as per srl item No-1 here in above but for one 5A socket outlet on the same board controlled by one switch.

All as per srl item No-51 here in above but for one 5A socket outlet on the same board controlled by one switch in existing conduit.

All as per srl item No-51 here in above but for one light point controlled by 2 nos two way switches.

All as per srl item No-51 here in above but for one light point controlled by 2 nos two way switches in existing conduit.

All as per srl item No-51 here in above but for one light/fan/bell point including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories as directed by Engr-in-Charge.

All as per srl item No-51 here in above but for one socket outlet 5 amps on indipendent board including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories as directed by Engr-in-Charge.

All as per srl item No-51 here in above but for one socket outlet 5 amps on same board including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories as directed by Engr-in-Charge.

All as per srl item No-51 here in above but for one light point controlled by two, two way switches including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories as directed by Engr-in-Charge.

All as per srl item No-51 here in above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories as directed by Engr-in-Charge.

Material and labour for point wiring with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volt FRLS grade ISI marked with multistranded copper conductor drawn through and including rigid PVC conduit/ Casing caping on wall/ceiling with and including provision of MS box of suitable size with 3mm thick laminated hylam sheet cover for housing switch, socket, etc incl provision of 1.5 sqmm single core cable green in colour PVC insulated copper conductor as earth continuity conductor connected to earth dolly for following:- a). One light point controlled by one 05 Amps switch.

All as per item No. 67 above but One fan/Exhaust fan point controlled by one switch.

All as per item No. 67 above but One socket out multi pin 5 Amps controlled by one switch on independant board.

All as per item No. 67 above but One calling bell controlled by one bell push

All as per item No 67 here in before but for one socket out let 2 in 1, 5 and 15 Amps or AC point with 4 Sqmm PVC copper conductor and provn of 4.0 sqmm PVC insulated single core copper cable green in colour as earth continuity conductor.

All as per item No 67 here in before but for one socket out let 2in1 5 and 15 Amps with 2.5 Sqmm PVC insulated copper conductor and provn of 2.5 sqmm PVC insulated single core copper cable green in colour as earth continuity conductor.

M&L in replacement for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 2.5 sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 1.5 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed.

All as per srl item No-73 here in above but in existing concealed conduit .

M&L in replacement for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 4 sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed.

All as per srl item No-75 here in above but in existing concealed conduit .

All as per srl item No-75 here in above but for cable of size 6 sqmm and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit .

All as per srl item No-75 here in above but for cable of size 6 sqmm and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm in existing concealed conduit with earth wire 4 sqmm.

All as per srl item No-75 here in above but for cable of size 10 sqmm and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm in & including concealed PVC conduit.

M&L in replacement for submain wiring with four single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 10 Sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit medium grade 32mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed by Engr-in- charge. Make of Cable : L&T, Havells, Polycab and Make of Conduit : Havells/Kamplast/Polycab

All as per srl item No-80 here in above but for cable of size 16 sqmm aand one single core PVC insulated flexible copper conductor multistranded cable green colour of size 10 Sqmm as earth lead in & including concealed PVC conduit .

All as per srl item No-80 here in above but for cable of size 25 sqmm and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 16 Sqmm as earth lead in & including concealed PVC conduit 40mm dia.

Supply and laying to wall or poles or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium multistranded conductor 10 sq. mm nominal cross section twin core for service connections all as required and directed.

All as per srl item No 83 but cable of size 6 Sqmm 2 core.

All as per srl item No 83 but cable of size 16 Sqmm 2 core.

M&L in replacement of earthing complete with galvanised cast iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or directed by Engineer-in-charge and testing on completion.

S B ENTERPRISES

DEO Traders

Vee Key Enterprises

NEW TECH ELCTRICALS

pk enterprises

RAJA RAM AND COMPANY