GENERAL FUND(2023-24)

Amount

Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil including excavated earth (SS20B)

Supply, delivery and filling with Stone dustfrom approved quarry in layer not more than 15 cm thick including watering with all layers and consolidation complying with standard specifications including cost and conveyance of Stone dust at site and labour chrages and all other incidental charges etc., complete as per standard specifications

Cement Concrete 1:4:8 (One cement, four fine aggregate and eight course aggregate) mix using 40mm HBG ISS metal from approved quarry including cost and conveyance of all materials to site and labour charges, including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specifications as directed by the departmental officers

Centering for soffits of CC slabs of plane surface like lintels, beams, etc., including strutting 3m high using mild steel sheets of size 90cm x 60cm x and BG 10 stiffened with MS angles of size 25mm x 25mm x 3mm laid over silver oak joists of size 10cm x 6.5 cm spaced at about 90 cm c/c and supported by consurina props of 10 cm to 13cm dia spaced of 75cm c/c complying with standard specifications and as directed by the departmentsl officers etc., complete

Centering for soffits of RCC slabs of plane surface like lintels, beams, etc., including strutting 3m high using mild steel sheets of size 90cm x 60cm x and BG 10 stiffened with MS angles of size 25mm x 25mm x 3mm laid over silver oak joists of size 10cm x 6.5 cm spaced at about 90 cm c/c and supported by consurina props of 10 cm to 13cm dia spaced of 75cm c/c complying with standard specifications and as directed by the departmentsl officers etc., complete

Supply and fabrication of steel and placing in position MS/Ribbed tor steel grills for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specificationsas directed by the departmentsl officers

Reinforced Cement Concrete 1:1.5:3 (One cement one and half fine aggregate and three course aggregate) mix using 20mm HBG ISS metal for all RCC items of works excluding centering and shuttering and cost of reinforcement grill but including curing the same and also fixing fan clamps and fixtures in RCC works whereever necessary as directed by the departmental officer etc., complete

Plain Cement Concrete 1:2:4 (One cement two aggregate and four course aggregate) mix using 20mm HBG ISS metal for all RCC items of works excluding centering and shuttering and cost of reinforcement grill but including curing the same and also fixing fan clamps and fixtures in RCC works whereever necessary as directed by the departmental officer etc., complete

Brick work with C.M. 1:5 (One cement and five sand) mix using II clsss table moulded chamber burnt bricks of size 9"x41/2"x3" including cost and conveycnce of all materials and labour charges for neat finishing and curing etc., complete complying with standard specificationsas directed by the departmental officers.

Clay Masonary wall Using Rectangular Yellow Refractory Fire Brick in size 9"x41/2"x3" work with Including cost and conveycnce of all materials and labour charges for neat finishing and curing etc., complete complying with standard specificationsas directed by the departmental officers.

Special ceiling Plastering in Cement Mortor 1:3 Mix (one Cement, Three sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications-10 m2.

Plastering with C.M.1:4 (One cement and four sand) mix using 12 mm thick including cost and conveyance of all materials and labour charges ete., complete complying with standard specifications as directed by the departmental officers

Finishing the top of roof with one course of machine pressed tiles 23 C.m x 23 C.m x 2 C.m size using cement mortor 1:3 mix mixed with 2% by weight of Crude Oil and pointing with Cement Mortor 1:3 mix Cost of all materials and labour charges and brick jelly concrete etc., complete as per standard specifications.

Construction of Granular Sub base by providing Grade I materials spreading in uniform layers onprepared surface, mixing by mix in place method at OMC andcompacting with vibratory roller to achieve thedesired density, including all labour charges etc., completeas per clause 401 of MORTH & H specifications

Plain Cement Concrete 1:1.5:3 (One cement One Point five aggregate and Three course aggregate) mix using 20mm HBG ISS metal for all RCC items of works excluding centering and shuttering and cost of reinforcement grill but including curing the same and also fixing fan clamps and fixtures in RCC works whereever necessary as directed by the departmental officer etc., complete

Supply and fixing of expansion joint using 12mm thick Bitumen pad including cost of bitumen pad and labour charges for cutting to required size, fixing in position, etc complete as per the standard specification.

Distempering Two coats with good quality of approved distemper including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm

Supplying and fixing RCC Pre cast slab in RCC 1:1 1/2:3 mix 50mm thick Including cost of reinforcement grill but including moduling, finishing watering curing and fixing in position etc., Complete as per std., Specifications.,

P Sampath