Loading
Loading…
Loading…
Tender Value
₹9.5 L
EMD Value
₹20,000
Closing Date
1 Sept 2026, 6:00 pm5d left
AGE (I) NIMU
AGE (I) NIMU PIN-901312 c/o 56 APO
PROVN OF PAN/ PLATE WASHING POINT NEAR COOK HOUSE OF HQ 72 INF DIV AT SANGAM HILL MIL STN AND SPL REPAIR TO REWIRING, LIGHTNING AND FIXTURES IN OR BLDG NO T-111 OF 108 MED REGT AT NURLA MIL STN UNDER AGE (I) NIMU
2026_MES_782928_1
AGE(I)/NIT-36/2026-27
Open Tender
Civil Works
Item Rate
180 days
NIMU
PLEASE REFER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
AGE (I) NIMU
₹20,000
1 Sept 2026
6 Aug 2026
3 Sept 2026
6 Aug 2026
1 Sept 2026
20 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavating in post holes (or similar holes) each n exc 0.5
cu. m, getting out, returning, filling in and ramming earth
or broken rubble mixed with earth around, in layers not
exceeding 25 cm, in hard/dense soil complete all as specified and directed by Engr-in charge. | - | Each | - | - |
| 2 | M&L for Cement concrete 1:3:6 type C2 in foundations, filling and mass concrete complete all as specified and directed by Engr-in charge. | - | Cum | - | - |
| 3 | M&L for Cement concrete 1:5:10 type E2 (40mm graded agg) in foundations,filling and mass concrete complete all as specified and directed by Engr-in charge. | - | Cum | - | - |
| 4 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in charge. | - | Sqm | - | - |
| 5 | S&F for Rolled mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc. conforming to FE-410W (Gde-E250)quality -B complete all as specified and directed by Engr-in charge. | - | Kg | - | - |
| 6 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed by Engr-in charge. | - | Kg | - | - |
| 7 | S&F for Rolled mild steel in joist, channel, angle, or tee sections, fixed independently, without conncecting plates, etc. (cut to ordinary length ie. Within 20mm of the length indicated) conforming FE-410W (Gde-E250)quality -B complete all as specified and directed by Engr-in charge. | - | Kg | - | - |
| 8 | M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint (1st quality) over one coat of red oxide primer complete all as specified and directed by Engr-in charge. | - | Sqm | - | - |
| 9 | Surface dressing n exc 15 cm deep and getting out in hard/dense soil complete all as specified and directed by Engr-in charge. | - | Sqm | - | - |
| 10 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,
manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed by Engr-in charge. | - | Cum | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.54 MB
BOQ_877174.xls
BOQ • 0.81 MB
TENDER.pdf
Tender Documents • 1.65 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].