Renovation of toilets in rooms F1 F2 F3 F4 F5 F7 F8 F9 F12 F14 1 2 3 4 and Common toilet 2 Nos at Hotel Tamilnadu Ooty Unit II

Amount

Dismantling the existing doors and ventilator and clearing away the debrises from the site. etc complete as directed

Dismantling the existing EWC with flush tank and wash basin and other accessories and clearing away the debrises from the site etc complete as directed

Clean removing of cement plaster from wall, floor and clearing away the debrises from the of the following items including shifting the unwanted materials to outside the complex with a conveyance upto 10 Km including loading & Unloading charges etc complete as directed

Dismantling the existing wall and floor tiles and clearing away of the following items including shifting the unwanted materials to outside the complex with a conveyance upto 10 Km including loading & Unloading charges . etc complete as directed

Dismantling the existing brick jelly clearing away the debrises from the site etc complete as directed

Fly Ash brick partition walls of 11.50cm thickness using best quality Fly Ash bricks of size 230mm x 110mm x 75mm in Cement Mortar 1:3 (One Cement and Three crushed stone Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers.

Providing Polymer coating (Water proof coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Applying first coat as directed by the departmental officer etc. The rate inclusive of cost of materials and labour, etc complete.

Brick jelly lime concrete 1:2:5 (One lime two sand and five brick jelly) using broken jelly 20 mm etc complete as per standard speicfication.

Plastering with cement mortar 1:3 (one cement and three p- sand), 10mm thick to RCC exposed faces in all floors with standard specification and as directed by the departmental officers.

Plastering with cement mortar 1:5 (one cement and five p-sand), 12mm thick in all floors including curing etc complete complying with standard specification and as directed by the departmental officers

Daddoing the side walls with vitrified designed tiles of approved quality, colour of size 600 x 300 x 8 mm in cement mortar 1:2 over a base plastering with CM 1:5(one cement and Five sand) including pointing with same colour cement over a base plaster with CM 1:3 including cost and conveyance of all material complying with standard specifications.

Finishing the flooring with Antiskid tiles of approved quality, colour, design and of size 30cm x 30cm x 6cm laid in cement mortar 1:3, 20mm thick including pointing the joints with same colour cement to the full depth of the tiles as per standard specifications.

Cement Concrete 1:1-1/2:3 (One Cement, One and a half crushed stone sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers a)Above ground level 4.50 m height

Supplying and erecting shuttering including necessary support using steel shutters for plain surfaces such as column footings, kerb wall and grade beam / plinth beam etc.requiring nominal strutting and removing the same after completion of specified period without disturbing the concrete etc. complete complying with standard specification

Supplying fabricating and placing in position of MS or RTS rods for all RCC works including cost of steel binding wire and labour charges to fabrication but excluding the cost of concrete and centering as per standard specification.

Supplying and fixing of Jet black granite slab 20mm thick over RCC slab using in CM 1:3. Charges including cutting ,cost of materials and conveyance charges etc complete as per standard specifications

Labour charges for grinding the granite slab edges into half round shape including cost of cutting blade and labour charges for grinding etc as per standard specification.

Supplying and fixing in position of white colour single piece wall mounted closet with soft closing seat cover of size 395x710x7307mm (Jaguar Model ) etc complete with standard specifications.

Supplying and fixing white colour oval shape table top wash hand basin of size 410mm x 410mm x 140mm (Jaguar Model or equvalent ) approved make with necessary 1/2” CP central hole basin mixer 1/2” CP waste coupling with bottle trap 1/2” CP angle valve 1/2”PVC Nylon connection etc., complete as directed

Supplying and fixing Towel rack 600MM of approved make (Jaguar Model or equvalent) as per standard specification.

Supplying and fixing robe hook for WC (SS) Size12mm of approved make (Jaguar Model or equvalent) as directed by the Corporation officers.

Supplying and fixing 1/2" brass CP wall mixer unit 3 in 1 half turn of approved make (jaguar or equvalent) along with 1/2" CP shower arm and 1/2" CP shower rose as per standard sepcification.

Supplying and fixing 1/2" CP Health unit with 2 way bib cock with wall flage of approved (Jaguar or equvalent) quality as per standard specifications.

Supplying and fixing CP Soap dish of approved make (Jaguar Model or equvalent) as directed by the Corporation officers.

Supplying and fixing Paper Roller of approved make (Jaguar Model or equvalent) as directed by the Corporation officers.

Supplying and fixing in position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality fixed over a bed of brick jelly lime concrete 1:2:5 (one part of lime, two part of sand and five part of 40mm brick jelly)

Supplying, laying, jointing in position of best quality 75mm & 110 mm dia PVC waste pipe (6kg / cm) of approved make (Finolex) and providing leak proof joints including making connection to all sanitary fittings, dismantling, masonry, RCC works wherever necessary and making good and dismantled portion complying with standard specifications.

75mm dia waste pipe

110mm dia waste pipe

Laying and jointing the following dia PVC specials suitable for 6kg/cm2 pipe.

75 mm dia Elbow

75 mm dia Bend

75 mm dia Tee with single door

75 mm dia vent cowl

110 mm dia elbow

110 mm dia Bend

110 mm dia Tee with single door

110 mm dia vent cowl

Supplying, laying and jointing of 25mm dia CPVC (Chlorinated poly vinyl Chloride) pipe (Higher pressure rating with higher pipe thickness) Standard Dimension Ratio - 11 and cutting, threading of pipes and concealing the pipes inside wall with necessary clamps and nails for 1 RM.

Supplying and fixing of 25mm dia (Chlorinated Poly Vinyl Chloride) Union of approved make as per standard specifications

Supplying and fixing of 25mm dia ball Valve (Chlorinated Poly Vinyl Chloride) of approved make as per standard specifications

Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications and as directed by the departmental officers. (The wall putty shall be got approved by the Assistant Executive Engineer before use of work).

Painting two coats of existing wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) ventilators from the profile the size of outer frames 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frames and shutter the shutter will be provided with Espag multi power point lock and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow lwakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and per size for arresting noise and energy loss. The coonecting mechanism between sash and outer frames that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Assistant Executive Engineer before use on work

Supplying, fabrication and fixing of 30mm thick both side pre laminated WPC door shutter with frame of required size including necessary furniture fitting such 125mmx30mm power coated hinges-3 Nos, 150mmx12mm power coated tower bolts, 150mm power coated handles, Teak wood lippings around the shutter etc including cost, conveyance of all materials and labour charges for fixing complying with standard specification.

Plastering with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

Plain cement concrete 1:2:4 (One cement Two sand and Four aggregate) using machine crushed 6mm to 12mm gauge hard broken grantie stone jelly including laying, curing finishing etc., complete complying with standard specification.

Ground Floor

First Floor

Second Floor

Paving the Top of roof with Solar refelective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Supplying, laying and jointing 50mm dai UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works.

Supply and fabrication including welding for structural frame works with 100 x 50mm M.S rectangle section for vertical post, 50 x 50mm M.S Square section for truss, 40 x 40mm M.S Square section for Purlin, 25x25mm M.S Square section for side frames works. The rate inclusive of cost and conveyance of priming coat painting with zinc chromate primer, material and labour etc., complete complying with standard specification.

M.S - 100 x 50 x 5mm

M.S - 40 x 40 x 3mm

Roofing with best quality galvalume carrugated colour sheet of size 0.47mm over the MS tubular section truss including cost of self thread screws and cutting the sheets to required shapes if found necessary during execution etc .complete

Supplying and fixing ornamental bath mirror of size of 0.75 x 0.60, 5mm thick with Teakwood beading of size 25mmx12mm alround the frame as directed by the Corporation officers

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade\in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator)

Wiring with 2 x 4 sq.mm. (56/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitablePVC rigid pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with painting of suitable colour for Concealed PVC pipe power Plug point.

Supply and Run of 2 of 2.5 sq.mm.(56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.

Supply and Run of 2 of 4 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.

Supply and fixing of 3 inch 9 watts warm white recess mounted fixed LED downlight made of extruded aluminium housing and high power LED as a light source with clear diffuser and separate electronic driver including giving electrical connection etc., complete.

Supply and fixing of 2 feet 9 watts warm white mirror light fitting on surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver including giving electrical connection etc., complete.

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall including giving electricla connection etc., complete.

GST at 18%

SUBRAMANIAM R (BID ID -1498900)