Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹3.0 Craccepted-aoc | ₹3.0 Cr | accepted-aoc |
Tender Value
₹3.4 Cr
EMD Value
₹5.1 L
Closing Date
9 Feb 2026, 8:30 pmClosed
Karnataka Rural Infrastructure Development Limited
Kiran Kumar HR EE
Construction of Girls Hostel at Veterinary College, Bidar for KVAFSU (ICAR)
KRIDL/2025-26/BD/WORK_INDENT8
KRIDL/2025-26/BD/WORK_INDENT8
Open
Buildings
Two Tender Document System(Two Cover)
KRIDL Managing Director Office Bengaluru
4 documents required · 4 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Satisfactory Completion as a prime Contractor for at least one similar work to an extent of 80% of the cost of the work of value not less than Rs. 271.80 Lakhs.
Executed in any one year the following minimum quantities of work Earthwork Excavation Cum1021 PCC / RMCCum725 Reinforcement Steel MT55 Internal LT Electrification work Rs24.00 Lakhs PHE Works 17.00lakhs Tiles/Granite works 1250.00 sqm
Achieved a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 679.50 Lakhs in at least two financial years
All Other Conditions Stipulated in Bid Document
₹5,000
₹5.1 L
9 Feb 2026
23 Jan 2026
11 Feb 2026
9 Feb 2026
6 Feb 2026
Construction of Girls Hostel at Veterinary College, Bidar for KVAFSU (ICAR)
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...
Concrete, Formwork & reinforcement
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
b) Terrace floor
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Isolated Footing (Additionalities of Formwork for isolate footing at 8Percent 2.2.3 Pg 15 Vol 1
Combined Footing (Additionalities of Formwork for Combined footing at 3Percent) 2.2.3 Pg 15 Vol 1
Column Upto Plinth (Additionalities of Formwork for Columns & Piers 70Percent) 2.2.3 Pg 15 Vol 1
Plinth beam (Additionalities of Formwork for Plinth beam at 50Percent ) 2.2.3 Pg 15 Vol 1
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Retaining Walls (Additionalities of Formwork for Walls at 10Percent) 2.2.3 Pg 15 Vol 1
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Terrace Floor 2.5.2 Pg 16 Vol 1
Columns (Additionalities of Formwork for Columns @ 70Percent- Ground Floor) Addendum-1, Vol-1
Columns (Additionalities of Formwork for Columns @ 70Percent Terrace Floor) Addendum-1, Vol-1
Roof Beam and Lintel Beam (Additionalities of Formwork for Roof Beam, Lintel Beam @ 60Percent-Ground Floor) Addendum-1, Vol-1
Roof Beam and Lintel Beam (Additionalities of Formwork for Roof Beam, Lintel Beam @ 60Percent- Terrace Floor) Addendum-1, Vol-1
Roof Slab (Additionalities of Formwork for Roof Slab @ 50Percent- Ground Floor) Addendum-1, Vol-1
Staircase (Additionalities of Formwork for Staircase @ 50Percent- Ground Floor) Addendum-1, Vol-1
Chajja (Additionalities of Formwork for Chajja @ 45Percent- Ground Floor) Addendum-1, Vol-1
Chajja (Additionalities of Formwork for Chajja @ 45Percent- Terrace Floor) Addendum-1, Vol-1
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
b) Terrace floor
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) 5.4 Pg 9 Vol 2
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/Cum and minimum compressive strength of 4.00 N/mSqm conforming to IS...
b) Terrace floor
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/Cum and minimum compressive strength of 4.00 N/mSqm conforming to IS...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
b) Terrace floor
Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved drawings of Chief Architect, GoK.The aluminium quality shal...
b) Terrace Floor
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the bu...
b) Terrace Floor
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and ...
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such...
b) Terrace Floor
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
b) Terrace Floor
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 Percent) total coated thickness with zinc coating...
b) Terrace Floor
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 Percent) total coated thickness, Zinc coating 120 g/Sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epo...
b) Terrace Floor
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...
Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...
Melamine polishing on wood work (one coat) including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per ...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing Float glass panes of nominal thickness 5 mm (weight not less than 12.50 kg/Sqm) Code-332, Pg-A22, Vol-2
Providing and fixing PVC Edge beading for fixing glass panes. Code-699, Pg-A33, Vol-2
Wardrobe shutter
providing and fixing openable shutters for wardrobe fixed,Ms frame of size of 35mm x35mm x 5mm ,using 25mm thick ply wood ,with 25mm x6mm thick plain teak wood beading ,lipping 1.5 t...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing bright finished brass door aldrop with necessary screws etc., complete
-do- 250x16x5mm
a) Ground Floor MR
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete
a) Ground Floor 12.60 pg...
Providing and fixing Stainless Steel(304 grade) Cylindrical lock with key to door shutters including cost of materials, labour etc., complete as per specifications of vendor and as per architects deta...
Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete
a) Ground Floor 12.62 Pg 104 Vol 02
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge
SS Handles 200mm
a) Ground Floor 22.15.1 Pg 218 Vol 02
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge
SS Door stopper 75mm
a) Ground Floor 22.15.10 Pg 219 Vol 02
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :
a) Ground Floor 12.74.1 Pg 107 Vol 02
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge
SS Tower Bolts 200x10mm
a) Ground Floor 22.15.6 Pg 219 Vol 02
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge
SS Aldrop 16mm dia, 200mm
a) Ground Floor 22.15.3 Pg 218 Vol 02
Providing and Fixing Holdfast of size 260mm x 25mm x 5mm Code 444 Pg A-25 Vol-2
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 Percent and conforming to I.S. 15622, of approved make, in all colours & shade, over...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including co...
Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , inclu...
Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...
b) Terrace floor
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
b) Terrace floor
Providing and fixing suitable plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/Sqm width, along route of walls chipped for...
b) Terrace floor
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...
b) Terrace floor
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
b) Terrace floor
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying add...
b) Terrace floor
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work...
b) Terrace floor
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
b) Terrace floor
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...
Providing drip moulding with plastering of 25mmx 100mm in cement plaster 1:4 with rendering for projected surface ,provding and removing the cost of scaffolding inculding cost of material , labours cu...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Concrete, Formwork & reinforcement
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine ...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Addtionalities for Form Work for combined Footing @3Percent A
Addtionalities for Form Work for retaining wall @10Percent B
Addtionalities for Form Work for Slab@50Percent C
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Supplying and fixing of heavy duty SFRC manhole cover with frame 560MM size for underground tank.Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)-...
Providing and fixing of PVC Rungs footrest in under ground tanks / manhole using Sqm0 concrete bed blocks for masonry walls or during construction for RCC surfaces, including cost of materials, labour...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricadin...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Concrete, Formwork & reinforcement
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Addtionalities for Form Work for Combined Footing @3Percent A
Addtionalities for Form Work for Wall@ 10Percent B
Addtionalities for Form Work for Roof Beam, Lintel Beam @ 60Percent C
Addtionalities for Form Work for Roof Slab @ 50Percent D
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, or all leads & lifts, all complete as per direction of Engineer-in-cha...
Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per...
Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engin...
Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation o...
Providing and fixing of PVC Rungs footrest in under ground tanks / manhole using Sqm0 concrete bed blocks for masonry walls or during construction for RCC surfaces, including cost of materials, labour...
Supplying and fixing of heavy duty SFRC manhole cover with frame 560MM size for underground tank.Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)-...
LT ELECTRICAL WORKS
PVC CONDUITS & ITS ACCESSORIES
Concealed conduit System
Supplying heavy gauge PVC conduit pipe ……mm dia ......mm thick confirming to IS 2509 with suitable size bends, metals/...
b) 25mm dia 2mm thick 1.2.2
c) 32mm dia 2.5mm thick 1.2.3
Supplying heavy gauge PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc. By groove cutting in the wall and fixing by bracing U or J hooks and c...
b) 25mm dia 2mm thick 1.3.2
c) 32mm dia 2.5mm thick 1.3.3
d) 40mm dia 2.5mm thick 1.3.4
Supplying and fixing PVC/metal conduit deep junction box.
a) 19/20mm deep junction box 1.5.1 (Page No: 2&3)
b) 25mm deep junction box 1.5.2
c) 32mm deep junction box 1.5.3
Extra for Groove cutting in brick wall/cc floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing the wall upto wall surface complete.
a) upto 50mm conduit in CC Floor ...
Supplying PVC flexible conduit pipe….mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm..using NF...
Supplying and fixing Metal fan box with round hook.
Page No:4 Item 1.13
Point wiring using copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wir...
b) Medium point above 3Mtr up to 6Mtrs from tapping point to out let via switch box 2.2.2
c) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box 2.2.3
d) Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switch box 2.2.4
e) Three outlet in a row, above 6Mtr up to 10Mtr from tapping point to out let via switches box 2.2.5
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-69...
c) 4 sqmm 2.3.4
d) 6 sqmm 2.3.5
e) 10 sqmm 2.3.6
f) 16 sqmm 2.3.7
Supplying and Drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130-1984 and (virgin) PVC insulation and she...
b) 3Cx2.5Sqmm 2.5.8
c) 3Cx4.0Sqmm 2.5.15
d) 5Cx4.0Sqmm 2.5.17
SWITCHES, SOCKETS & ACCESSORIES
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove c...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
b) 3 Module 3.5.2
c) 4 Module 3.5.3
d) 6 Module 3.5.4
e) 8 Module 3.5.5
f) 10-12 Module 3.5.6
g)18 Module 3.5.8
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293
a) 6 Amps one way 3.6.1
b) 6 Amps Two way 3.6.2
c) 6Amps 3way socket. 3.6.3
d) Stepped fan regulator Two module 3.6.4
e) 32A,DP,Switch 3.6.9
f) 16Amps one way switch 3.6.7
g) 6/16Amps universal socket 3.6.10
CONTROL SWITCH GEARS & ACCESSORIES
Supplying push button operated, direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic ther...
Supplying and fixing regular Vertical Type MCB distribution panel confirming to IS 8828 , on wall/wood board/ flush mounting using required clamps, bolts, nuts etc.. With provision for fixing of suita...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
b) 5-32Amps DP 5.18.4
c) 63Amps DP 5.18.6
d) 5-32Amps TPN 5.18.7
e) 40Amps TPN 5.18.8
f) 50-63Amps TPN 5.18.9
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts ,nuts etc., with provision for fixing suitable type capacity MCB'S single phase ...
II) Double Door
II) Double Door
III) Double Door
III) Double Door
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.
a)16 - 25Amps 4 pole 5.20.4
b) 32-40Amps 4 pole 5.20.5
c) 63Amps 4 pole 5.20.6
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron ….and M.S. flat with bolts, washers etc… and painted with 2 coats of red oxide and then two coats of approved paint.
Supplying and fixing of metal Socket set of 2 pole and earth plugs and socket for incorporating SP and TP MCB (without MCB). The entire Plug and Socket shall be mounted in athermoplastic / powder coat...
EARTHING AND L.T. U.G. CABLES
Supplying fixing and wiring earth electrode for grounding of DG Sets etc. using 40mm dia 2.9mm thick 2.5mtr long GI pipe with GI funnel with mesh and suitable size reduc...
Supplying and running of GI / Copper strips for grounding connections, using necessary fixing materials as required.
c) 600x600x3mm GI Plate 12.58.6
Guy Wire & GI Wire as per IS-2141,
8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM 8.02
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975
4 core 10 sq.mm (10 GI Strips - 4 x 0.8 mm) 32.03
4 core 16 sq.mm (11 GI Strips - 4 x 0.8 mm) 32.05
3.5 core 50 sq.mm (16 GI Strips - 4 x 0.8 mm) 32.11
3.5 core 70 sq.mm (18 GI Strips - 4 x 0.8 mm) 32.13
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff
a) 2.5 sqmm to 25 sqmm 21.05
b) 35 sqmm to 95 sqmm 21.06
Brass Cable Gland
Aluminium End Terminal (Lug)
Heavy Duty Copper Terminal Long Barrel
a) 50 Sqmm Copper Terminal, Apprx Wt: 26 Gm 59.03
b) 70 Sqmm Copper Terminal, Apprx Wt: 38 Gm 59.04
Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required.
Fixing charges of Post top/gate/garden fitting/LED on the existing CI/GI or any other pipe using required size of reducer, wiring using suitable wires. 13.6 (Page No: 56)
Fixing all types and all capacities fluorescent /false ceiling/spot light/CFL/LED fittings indoor on the wall / ceiling / rafters / girders using 23 / 0.00076 " twin twisted PVC insulated wires, requ...
Using 2 Mtr long 19mm 18SWG enamelled braised conduit of two nos. rod pendent with ball socket with check nuts all nickel plated. 13.9
Extra length of GI pipe of class b 19mm dia for down rod. 13.12
Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing a 5 amps ceiling rose, necessary...
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. 13.14 (Page No: 57)
LIGHT FIXTURES AND FANS
Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applications. 11.15 (Page No: 47)
Supplying of 2 feet - LED PVC Square Batten …W with high quality diffuser with life of 25000 burning hours & 70Percent lumen maintenance with CRI more than 8. Power Input : 220-240V @ 50 Hz & power ...
b) Led light fitting 1X4' - 20 / 22 watts 11.3.2
c) Led light fitting 1X4' - 36/ 40 watts 11.3.3
Supply of round/square Recess/surface mounted rolling type LED Downlight with......WGU10LED Lamp Rib Fabricated from die cast aluminium with white powder coated prewired to mains connector & has swive...
LED square or round down light 10-12W 11.5.2
LED square or round down light 15-18W 11.5.3
Supply of LED Street light with pressure die cast aluminum housing body with optimal heat sink for better thermal dissipation. Diffuser with injection moulded & is made of polycarbonate material with ...
Supply of LED Flood light with ......W system power consumption pressure die cast aluminum housing with powder coating with IP 65 protection. 1 200-270v voltage with electronic driver, PF Greater than...
Fabricating, supplying and erection of… Mtrs long hot dip Galvanized Conical Pole with BSEN 10025 grade S355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, includin...
Supplying and fixing of Hot Dip Galvanized M.S Bracket suitable for out door luminairs and mounted on octoganal pole using necessary bolts, nuts etc…. Complete a) Single Arm Bracket with 1000mm Sta...
Supplying exhaust fan of 1440RPM heavy duty with bracket blades complete for lighting duty suitable to operate on 230V 50Hz, AC supply.. 12" sweep (300mm) 6.2.1 (Page No: 30)
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power inpu...
Supplying wall mounting fan suitable to operate at single phase 230v AC supply.
400mm Sweep 6.5.2 (Page No: 30)
Design, manufacture, supplying, fixing in position, testing and commissioning of following MV switchgear panels made up of 14/16G, suitable for 415 V, 3 phase, 4 wire, 50 Hz power dist...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron… and M S flat …….. With bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved pai...
Supply and fixing of fully enclosed Automatic Transfer Switch (ATS) Pre-wired with flexible settings and seamless transfer between twom power sources. The enclosure made of MS Power coated of necessa...
Supply and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of overload and short circuit with thermal ...
100Amps 25kA 5.15.9
125Amps 35kA 5.15.10
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220V AC, 50Hz 12/24V DC. 5.38 (Page No : 19)
Supplying, fixing and wiring 3 phase Digit Digital Ammeter/Voltmeter 5.29 (Page No : 19)
Supplying, fixing and wiring 50/5A to 400/5A 5VA burden current transformer class 0.5 accuracy with Tape wound 5.34 (Page No : 19)
Supplying of multi function Meter digital three line back light LCD type display of voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with IP 54 ...
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50Hz AC with latest microcontroller based, digital read out of percentage leakage curr...
Supplying …….amps rated 3 phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator w...
250Amps 5x30x10mm Aluminum Strips. 5.40.2
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
6-32 Amps TPN 5.18.7
40 Amps TPN 5.18.8
50-63 Amps TPN 5.18.9
CIVIL WORKS RELATED TO ELECTRICAL WORKS
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring...
Supplying and laying double walled corrugated (DWC) HDPE pipe including all necessary connecting sockets/couplings/tees/bends/end caps of same materials in existing trench as per IS 14930 part-ii suit...
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60cm long and fixing the same in ground...
STREET LIGHT POLE FOUNDATION
Supplying and Making of following necessary works for light pole foundation.
Concrete Foundation 1:2:4, 300 Dia, 700mm Deep with above ground coping. MS Base Plate 225 x ...
FIRE SAFETY WORKS
Supplying of two buckets standalong with buckets 15.112
Supplying of HAND GLOVES 15.113
Supplying of first aid box 15.114
Supplying of SAFETY MASK 15.115
Supplying of FIRST AID CHART with lamination 15.116
SupplyingandinstallationofRUBBERMAT1mtrx1mtr-1Ommthick.completeincludingcostofmaterials,labour,usagechargesofmachinerycomplete as per specifications. 15.117
CAMERAS & ACCESSORIES
Supply, Installation, Testing & Commissioning of 1/3" progressive scan CMOS, 5.0 megapixel, IP based Colour camera, Up to 30 m IR range, Color: 0.01Lux, 1000TVL, Digital WDR (Wid...
Supply, Installation, Testing & Commissioning of 24port 10/100/1000 Smart POE Switch with 4 SFP (192W)for camera connection including all necessary accessories. Non-SR
Supplying, installation, testing and commissioning of 16 channel embedded 4K Network video Recorder (NVR) with following technical specifications. Embedded 4K NVR: Third-party network cameras supporte...
Supply, Installation, Testing & Commissioning of HDMI, Display Monitor 40" high resolution, Monitor with all mounting bracket accessories. Non-SR
NETWORKING AND COMMUNICATION :
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293.
b) RJ45/I.O. outlet (For Data) 3.6.12
Supplying and drawing UTP-CAT 6 LAN cable. 8.1 (Page No: 36)
Supplying and Drawing PVC flexible one pair telephone unarmoured tinned copper cable.
a) 2 Pair 8.2.2
b) 5 Pair 8.2.5
c) 20 Pair 8.2.7
Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable. RG-6. 8.3 (Page No: 36)
Supplying and fixing of switch mounting rack with power manager & cable manager.
9U with 450mm depth 8.4.3(Page No: 36)
Supplying and fixing of power strip. 8.5 (Page No: 36)
Supplying and fixing of fan. 8.8 (Page No: 36)
Supplying fixing of Network Switches.
24 Port 10/100/1000 switch 8.9.10(Page No: 36)
16 Port 10/100/1000 switch 8.9.11
Supplying & fixing of ….mtrs Cat6 Patch Cable - a) 1 mtr 8.11.1 (Page No: 37)
Supplying & fixing of Patch Panel for LAN cabling.
24 Port 10/100/1000 Patch Panel 8.12.5(Page No: 37)
Supplying and Fixing of MDF Krone junction box with KRONE module / Telephone cable termination.
FIRE EXTINGUISHERS - Supply & Providing 4.5Kg C02 Gas Type aluminium body Squeeze grip Fire Extinugisher, Trolley Mounted, Easy Weight Management, Used Unused Mechanism, Squeeze Grip, Gross Weight 11....
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with screws, fixing materials and sealant to all sides of wall flange complete.
Make : Jaquar, M...
Providing and fixing Single lever wall mixer with L shaped Tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Cl...
Providing and fixing Shower Arm Casted 120mm Long Heavy Body Round Shape for Wall Mounted Showers with Wall Flange complete Make : Jaq...
Providing and fixing C.P. brass bib cock of approved quality conforming
a) Ground Floor VOL-2/Pg-119/13.12
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
a) Ground Floor VOL-2/Pg-119/13.15
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers comple...
Supplying & fixing testing and commissioning of stainless steel soap dish Holder.
Model No- ACN -1131N MR
Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class
a) Ground Floor VOL-2/Pg-144/14.89.a
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making ...
Supplying & fixing of Sink Cock with Regular Swinging Spout (Wall Mounted Model) With Wall Flange complete.
Model No- F-5347D MR
Supplying, Installing in position Grab Bar (Stainless Steel) 600mm Long with pair of fixing screws and fixing material complete.
Model No- AHS-1507 MR
INTERNAL SEWERAGE SYSTEM
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Flexible pipe 40 mm Dia
a) Ground Floor VOL-2/Pg-136/ 14.28.2.2
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety 75 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments 10.8.6, Pg 116, Vol-5
Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 10.9.6, Pg 117, Vol-5
Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 10.10.6, Pg 117, Vol-5
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments 10.8.8, Pg 116, Vol-5
Supply and delivery at site special moulded variety 110 mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 10.9.8, Pg 117, Vol-5
Supply and delivery at site special moulded variety 110 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 10.10.8, Pg 117, Vol-5
Providing & fixing, testing and commissioning u PVC multi inlet floor trap 75mm dia conforming to IS 13592 with required P C C support placed to required level as per site condition complete.. MR
Supplying and fixing PVC P' trap 110mm dia, of self cleansing design with or without vent arm complete including cutting and making good the walls and floors. MR
Providing & Fixing in position heavy duty C P grating 125mm dia, with frame of below mentioned sizes including jointing and fixing material complete.
Providing and grouting sleeves made in beam/ slab to draw waste and soil lines at all floor level of the below mentioned sizes , including condcting water ponding test to ensure zero leakage with all ...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pi...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pi...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pi...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :20 mm nominal bore.
a) Ground Floor Vol-2, Pg-122, I.No 13.5.2
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25 mm nominal bore.
a) Ground Floor Vol-2, Pg-122, I.No 13.4.1
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :32 mm nominal bore
a) Ground Floor Vol-2, Pg-122, I.No 13.4.2
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Supplying , fixing, testing and commissioning of PVC welded rain water head / khurras dome type grating with puddle flange to fix head in RCC slab specially fabricated from minimum 4mm thick PVC shee...
EXTERNAL SEWERAGE SYSTEM & PUMPS
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and l...
Supply and delivery at site special moulded variety 75 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments VOL-5/Pg-116/10.8.6
Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments VOL-5/Pg-117/10.9.6
Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments VOL-5/Pg-117/10.10.6
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...
Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments VOL-5/Pg-116/10.8.8
Supply and delivery at site special moulded variety 110 mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments VOL-5/Pg-117/10.9.8
Supply and delivery at site special moulded variety 110 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments VOL-5/Pg-117/10.10.8
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...
Supply and delivery at site special moulded variety 160 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments 10.8.10, Pg 116, Vol-5
Supply and delivery at site special moulded variety 160 mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 10.9.10, Pg 117, Vol-5
Supply and delivery at site special moulded variety 160 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 10.10.10, Pg 117, Vol-5
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 100mm x 100mm size P type with Non Modular common burnt clay bricks of designation 3.5& wa...
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal ...
Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approve...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
DOMESTIC WATER TRANSFAR PUMP
Supplying, installing, testing and commissioning of submersible / Mono blockelectrical driven pump 1set . (1 working & standby) domestic water pumps for pumping domestic ...
Providing and fixing gun metal non- return valve of approved quality
32 mm nominal bore 13.6.2.2, Pg 118, Vol-2
Providing and fixing gun metal non- return valve of approved quality
40 mm nominal bore 13.6.3.2, Pg 118, Vol-2
Construction of brick masonry catch basin chamber chambers of internal clear dimension as mentioned below by using first class table moulded modular bricks 230 mm thick wall in cement mortor joints in...
Construction of percolation well / rain water harvest pit of 2 m dia and 3m deep with precast RCC rings, coveringthe top with RCC slab including supply and fixing 600 x 600 RCC MH cover CI / MS rungs...
Supplying, installation, testing and commissioning of solar hot water heater comprising of solar Flat Plate Collector (FPC) of size 2120x1040x100mm and stainless steel hot water storage tank with stai...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Works KVAFSU tender document Bidara.pdf
Tender Document • 0.66 MB
BIDAR KVAFSU DWG.pdf
Others - Drawings • 3.99 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .