Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
27 Mar 2025, 11:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
60 days
Expenditure
General
40
3 conditions
Performance Clause: Tenderers must submit performance documents such as copies of recent Purchase Orders for the tendered item or similar items received from any Zonal Railways /PUs with Receipt notes. Please note that non submission of such documents shall be taken as they are not having any such past performance and their offers shall be considered further as per extant rules. i) The tenderer with past performance of satisfactory execution of contracts as mentioned above for supply of the same items for a quantity of 20 percent or more of tendered quantity against a single contract during last three years prior and to excluding, tender opening date may be considered [as responsive to N.F Rlys requirements] for placement of regular order. ii) If such past performance level is lower, then the offer may be considered [as responsive to N.F Rlys requirements] for placement of development order not exceeding 20 percent of the net procurable quantity. For consideration of such development orders, the tenderers who have no past performance as above, must along with their quotation submit the NSIC for the same item
As per public procurement policy ( preference to make in India) order no P- 45021/2/2017-PP (BE-II)2019 dated16/09/2020 of Ministry of Commerce, it has been found that there is sufficient local capacity and competition in supply of the tendered item of required quantity and therefore public procurement of the item is restricted to class I local suppliers only and the vendors who do not qualify to be class I local suppliers should not quoted in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a class I local suppliers for the tendered item participates in the tender it does so at its own risk and cost and Railways shall not be liable for any lost or damaged caused to the vendor
[a] Tenderers are hereby instructed to supply the tendered quantity to the respective consignee(s) as indicated in tender document. [b] If tenderers mention anywhere in its offer contrary to (a) above and/or mentions not to supply to some of the consignees, such offer may not be considered for ordering for such consignees where the tenderer has not agreed to directly deliver the stores without any back reference.
13 conditions
Tenderers have to quote the FOR destination rate.
(A) MSE sources, who are interested for availing benefits under MSE act mentioned in the notification of Ministry of MSME, should upload valid document maintained under MSE act such as UDYAM Registration certificate duly marking the tendered item in the certificate otherwise claim for benefits under MSE act may not be entertained.
(B) MSE source owned by SC/ST/Woman should upload necessary documents to get the benefits in regard to their category i.e. the ownership of MSE pertains to SC/ST/Other category clearly. Absence of this information in the registration certificate would be taken as MSE falling in the category of Others
Make in India Policy: (a) This tender complies with Public Procurement Policy (Make in India) Order 201, revised on 16.09.2017, issued by department of Industrial, Promotion and Policy, Ministry of Commerce circulated vide Rly. Bd%u2019s letter No. 2015/RS(G)/779/2/Pt.1, dtd. 25.09.22. (b) Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported item and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated at Para-14 of Special conditions of contract attached. (c) In case of procurement for value in access of Rs. 10 Crs. the Class-I local supplier/Class-II local supplier shall be required to provide a certificate from the statutory auditor or cost auditor of the company (In case of companies) or from practicing cost accountant or practicing chartered accounts (In respect of suppliers other than companies) giving the percentage of local content.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Consignee
Warranty: Railway Standard guaranty/warranty clause as per IRS conditions of contract or as per specification whichever is higher will be applicable.
Validity of the offer will be 60 days from the date of closing of the tender
(a) In case of any contradiction or conflict between special conditions of contract to that instruction to tenderers/IRS conditions of contract, the Instruction of tenderer will prevail. (b) In case of any contradiction or conflict between tender schedules to that instruction to tenderers/Special condition of Contract/IRS condition of contract, the conditions pointed out in tender schedule will prevail.
Acceptance of tender: ( a ) The purchaser reserves the right to reject any or all of the tenders in part or full at his sole discretion without assigning any reason. ( b ) Railway does not pledge itself to accept the lowest or any tenders and reserves to itself the right of acceptance of the whole or any part of the quantity offered. ( c ) The decision of Railways with regard to allotment of quantity so as to insure uninterrupted supply of Sleepers will be final. (d) The acceptance of the tender will be communicated by letter of acceptance direct to the tenderers. In case where a counter offer is issued, the unconditional acceptance of counter offer will result in a validity concluded contract through formal letter of acceptance may be forwarded to the contractor at a letter date.
5 locations across Assam · 14 Numbers total
Supply of automatic Change Over Control and Distribution panels
40255219
40255219
Limited - Indigenous
Goods
Assam
₹0
Exempted
27 Mar 2025
25 Mar 2025
3 items · 14 Numbers total
Supply of automatic Change Over Control and Distribution panels for CLS as per Latest RDSO SpecificationNo.TI/SPC/PSI/CLS/0020 with A&C Slip 1 to 4. CORE approved drawing no.:ASCOS/CORE/2005/0 1 Rev.02 or latest.The interior of CLS panel shall be adequately lighted by 60 Watt, 240 V AC lamp with a d oor operated switch. The wiring shall be capable to ON/OFF the lamp through door operated switch if any o ne power supply is available on the panel. The supporting frame and panel shall be properly treated and th en under coated suitably to serve as base and binder for the finishing coat applied. The exterior & interior s urface and the supporting frame of the panel shall be epoxy powder coated of VELLUM colour in a shade No . 365 of IS:5. If any painting surface gets damaged during transit, the surface finish shall be restored at site after erection. (1) 150 Amp. Capacity 240 volts, 3 Supply, 50 Hz. for 25 KVA AT(Make: ISI Approved) [ Warr anty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/ELEC/RPAN, NFR | Assam | 1.00 Numbers |
| SSE/ELECT/BG/NBQ, NFR | Assam | 1.00 Numbers |
| SSE/ELECT/GLPT, NFR | Assam | 1.00 Numbers |
| SSE/P/RNY, NFR | Assam | 1.00 Numbers |
| Total | 4 Numbers | |
Supply of automatic Change Over Control and Distribution panels for CLS as per Latest RDSO Specification No.TI/SPC/PSI/CLS/0020 with A&C Slip 1 to 4.CORE approved drawing no.:ASCOS/CORE/2005/0 1Rev.02 or latest.The interior of CLS panel shall be adequately lighted by 60 Watt, 240 V AC lamp with a do or operated switch. The wiring shall be capable to ON/OFF the lamp through door operated switch if any on e power supply is available on the panel. The supporting frame and panel shall be properly treated and the n under coated suitably to serve as base and binder for the finishing coat applied. The exterior & interior su rface and the supporting frame of the panel shall be epoxy powder coated of VELLUM colour in a shade No. 365 of IS:5. If any painting surface gets damaged during transit, the surface finish shall be restored at site after erection.(2) 60 Amp. Capacity 240 volts, 3 Supply, 50 Hz. for 10 KVA AT(Make: ISI Approved) [ Warra nty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/ELEC/RPAN, NFR | Assam | 1.00 Numbers |
| SSE/ELECT/BG/NBQ, NFR | Assam | 2.00 Numbers |
| SSE/ELECT/BNGN, NFR | Assam | 1.00 Numbers |
| SSE/ELECT/GLPT, NFR | Assam | 1.00 Numbers |
| SSE/P/RNY, NFR | Assam | 1.00 Numbers |
| Total | 6 Numbers | |
Supply of automatic Change Over Control and Distribution panels for CLS as per Latest RDSO Specification No.TI/SPC/PSI/CLS/0020 with A&C Slip 1 to 4.CORE approved drawingno.:ASCOS/CORE/2005/0 1Rev.02 or latest. The interior of CLS panel shall be adequately lighted by 60 Watt, 240 V AC lamp with a d oor operated switch. The wiring shall be capable to ON/OFF the lamp through door operated switch if any o ne power supply is available on the panel. The supporting frame and panel shall be properly treated and th en under coated suitably to serve as base and binder for the finishing coat applied. The exterior & interior s urface and the supporting frame of the panel shall be epoxy powder coated of VELLUM colour in a shade No . 365 of IS:5. If any painting surface gets damaged during transit, the surface finish shall be restored at site after erection.(3) 30 Amp. Capacity 240 volts, 3 Supply, 50 Hz. for 5 KVA AT(Make: ISI Approved) [ Warrant y Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/ELECT/BG/NBQ, NFR | Assam | 1.00 Numbers |
| SSE/ELECT/BNGN, NFR | Assam | 1.00 Numbers |
| SSE/ELECT/GLPT, NFR | Assam | 1.00 Numbers |
| SSE/P/RNY, NFR | Assam | 1.00 Numbers |
| Total | 4 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
CLSDemand.pdf
ATTACHMENT
FACotherscertificate00013.pdf
ATTACHMENT
SPECIFICATIONOFCLS.pdf
ATTACHMENT
EastlandSwitchgearPvtltd.pdf
ATTACHMENT
5344901.pdf
ATTACHMENT
BudgetaryQuotationAshokaBuidcon.pdf
ATTACHMENT
DRMe-officenoteagainstproposedEstimate.pdf
ATTACHMENT
DRMe-officenoteagainstproposedEstimate_1.pdf
ATTACHMENT
DRMe-officenoteagainstproposedEstimate_2.pdf
ATTACHMENT
DRMe-officenoteagainstproposedEstimate_3.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .