RESURFACING/ REPAIR OF ROAD, ROAD FURNITURE AND ROAD MARKING PAINT UNDER GE MCEME SECUNDERABAD

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc. 400 sqm and exc. 50 mm and n. exc. 100 mm deep and including applying evenly a tack coat of Cationic Bitumen Emulsion (RS 1)conforming to IS : 8887 @ 0.20-0.30 Kg / Sqm on bituminous Surface / WBM Surface of road by mechanical sprayer complete all as specified and directed.

M&L consolidated thickness 75 mm or less, premixed bituminous macadam laid, spread using mechanical paver with 4% binder content by weight of total mix, using paving bitumen binder of grade VG-30 grade by weight of total mix, rolled and compacted to required gradient and camber using power roller of capacity exc. 8 tonne but not exc. 12 tonne complete all as specified and directed.

M&L bituminous premixed semi-dense asphaltic concrete 30 mm consolidated thickness with 5.5 % binder content using paving bitumen of grade VG-30 penetration by weight of total mix laid using mechanical paver, rolled and compacted to required gradient and camber using power roller of capacity exc. 8 tonne but not exc.12 tonne power roller and including preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bag to remove loose dirt and incuding applying evenly a tack coat of Cationic Bitumen Emulsion (RS 1) conforming to IS : 8887 @ 0.20-0.30 Kg / Sqm over existing black top surfaces by mechanical sprayer complete all as specified and directed.

M&L preparing bituminous surfaces of road and inluding marking with 2.5 mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machine all as per manufacturers instructions complete all as specified and directed.

S&F in repair road studs (Cat Eye) two way reflective of Size 100 x100 x 25 mm (min size) and max size according to manufacturer made with ABS material, scratch and abrasion resistant, micro plastic, temperature resistant body complete all as specified and directed.

S&F in repairs solar cat eye aluminum alloy shall (100 % water proofing design according to 65) of size 125 x 125 x 25 mm (shank 65 mm) of high efficiency mono rystafie solar panel 2.4V / 0.3 watt one NI-ed rechargeable battery (1.2V / 1600 MA) consisting of super bright LED with 10,000 to 18,000 mcd as per manufactures instructions complete all as specified and directed.

M&L providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), and including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), making drainage opening wherever required and including demolition complete all as specified and directed.

M&L preparation of new concrete surfaces of any description not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of priming paint as per manufactures instructions complete all as specified and directed.

M&L prepration of old painted concrete surfaces over 10 cm girth or width, not otherwise described and including applying one coat of synthetic enamel paint complete all as specified and directed.