Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹41.4 LAccepted-AOC | L-1 | Accepted-AOC ACCEPTED | |
| 2 | L-2₹46.0 L+₹4.6 L (11.1%)Rejected-Finance 183 MG ROAD JUNGLIGHAT PORT BLAIR 744103 | PORT BLAIR | SOUTH ANDAMANS | ANDAMAN NICOBAR ISLANDS | 744103 | L-2 | Rejected-Finance Other than lowest bidder. | |
| 3 | L-3₹46.7 L+₹5.3 L (12.8%)Rejected-Finance | L-3 | Rejected-Finance Other than lowest bidder. | |
| 4 | L-4₹46.8 L+₹5.4 L (13.0%)Rejected-Finance | L-4 | Rejected-Finance Other than lowest bidder. | |
| 5 | L-5₹46.8 L+₹5.4 L (13.2%)Rejected-Finance | L-5 | Rejected-Finance Other than lowest bidder. |
Tender Value
₹42.0 L
EMD Value
₹83,900
Closing Date
17 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, Alipore
NO 1 NATIONAL LIBRARY AVENUE, ALIPORE, KOLKATA 700027
REPAIR/ MAINT OF WATER DISTRIBUTION AND SUPPLY LINE INCLUDING VALVE PIT AND REPAIR/ MAINT OF DIFFERENT PUMPS AND MOTORS INCLUDING SEWAGE PUMPS AT II LINE AREA UNDER GE ALIPORE KOLKATA
2024_MES_676653_1
GE/ALP (8386B) KOLKATA OF 2024-25
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE (Alipore) Kolkata
CLASS D AND CATEGORY a(ii)
9 documents required · 9 mandatory
₹500
Garrison Engineer, Alipore
₹83,900
Yes
GE (Alipore) Kolkata
23 Dec 2024
26 Sept 2024
24 Oct 2024
26 Sept 2024
17 Oct 2024
10 Oct 2024
26 Sept 2024 - 3 Oct 2024
4 Oct 2024
Amount
Taking down Centrifugal pump/ Submersible cetrifugal (open oil) pump set from existing position for carrying out repair works and re-assembling, re-installing the pump set in original position for pump capacity 25 HP. Note: Spare parts, winding wire required for renewal shall be measured and paid separately.
All as item No 1 here-in-before but pump capacity 20 HP.
All as item No 1 here-in-before but pump capacity 15 HP.
All as item No 1 here-in-before but pump capacity 5 HP.
Dismantling and opening the motor from pump set in existing position for carrying out rewinding work with new super enamelled copper wire of suitable gauge as per existing and heat varnishing complete with all other material required for rewinding by carrying the motor to outside the cantonment area, re-assembling and refixing the same with pump in original position for the following capacity of motor :-
25 HP 3 Phase .
20 HP 3 Phase .
15 HP 3 phase .
5 HP 3 Phase .
Taking down monoblock/ Booster pump set from existing position for carrying out repair works and re-assembling, re-installing the pump set in original position for pump capacity 15 HP. Note: Spare parts, winding wire required for renewal shall be measured and paid separately under relevant items.
All as item No 6 here-in-before but pump capacity 10 HP
All as item No 6 here-in-before but pump capacity 3 HP
All as item No 6 here-in-before but pump capacity 2HP/1.5 HP/1HP
Material & labour for rewinding work for 3 Phase motor of monoblock pump/ Booster pump motor set with new superenamelled copper wire of suitable gauge as per existing including heat varnishing complete for following sizes of motor :-
Dismantling of all electric & water connections and lifting of submersible pump and motor including colum pipe with the help of chain pulley block for pump capacity 15 HP, opening of pump and motor, cleaning, servicing and replacement of spare parts where directed.
All as item No 11 here-in- before but 10 HP.
All as item No 11 here-in- before but 2 HP. Note: Spare parts,winding wire required for renewal shall be measured and paid separately under relevant items.
Material & labour for rewinding work for 3 Phase submersible motor with new pvc insulated supper enamelled copper wire of suitable gauge as per existing complete for following sizes of motor :-
Taking down Submersible non clogging sewage pump set complete from existing position for necessary repair and reassembling, refixing the same in original position for pump of capacity 10/12.5/15 HP Note: Spare parts, winding wire required for renewal shall be measured and paid separately.
All as item No 15 here-in-before but pump capacity 3 HP
All as item No 15 here-in-before but pump capacity 20 HP Note: Spare parts, winding wire required for renewal shall be measured and paid separately.
Material and labour for rewinding work for 3 Phase motor of submersible non-clogging pump set with super enamelled copper wire of suitable gauge with all other materials required for re-winding of motor of capacity 10 /12.5HP.
All as item No 18 here-in-before but pump capacity 3 HP
All as item No 18 here-in-before but pump capacity 20 HP
Supply only hydroulic oil, suitable for 10 hp,15 HP, 20 HP Submersible non clogging sewage pump set aIl as per sample
Material and labour for febrication of MS base made of MS Channel of size 50 X 100 mm, 5 mm thickness and length 1 to 1.2 m including reinforecement as per direction and grouting 04 Nos bolts of size 5/8" X 6" long including proper alignment of pump and motor and adjustable system of base plate including necessary cement work incuding with dismantling of old worn out base plate all as specifcied and as directed.
Material and labour for painting with one coat of synthetic enamel paint after cleaning all dirts from old surface for pump set of different capacity and other equipments complete including writing letters or figures (Block, Roman, or Indian, stop, commas, shortline, dashes, hypens, brackets etc) n. exc 30 cm high.as required for following capacity of pump set :-
Material and labour as in repair nuts and bolts of suitable sizes for fixing in different parts of pump and motor complete.
Supply and fix water proof submersible flat copper cable 10 Sqmm 3 core, 3 phase, 440 Volts.
Supply and fix water proof submersible flat copper cable 6 Sqmm 3 core, 3 phase, 440 Volts.
Supply and fix as in repair fully-automatic star delta starter Submersible type suitable for 15 HP motor, 3 phase, 415 Volts Make : C & S Cat No E3-DXP204316X or equivalent. Model of L & T/ HAVELLS
Supply and fix as in repair standard-fully-automatic star delta submersible pump starter suitable for 10 to 12 HP motor, 3 phase, 415 Volts. Make : C & S Cat No BE3-DXP204316X or equivalent. Model of L & T /HAVELLS
Supply and fix as in repair fully- starter suitable for 5 to 7.5HP motor,3phase, 415 Volts. Make : C & S Cat No BE3-DXP204316X or equivalent. Model of L & T /HAVELLS
Supply and fix as in repair DOL starter suitable for 3 HP motor,3 phase, 230 Volts. Make : C & S Cat No BE3-D or equivalent. Model of L & T /HAVELLSL
Supply and fix as in repair contactor MNX 25, 25A-45A capacity, 415 Volts rating. Make : L & T Cat No CS94110 or equivalent make as approved by GE.
Supply and fix as in repair contactor MNX 18, 18A-30A capacity, 415 Volts rating. Make : L & T Cat No CS94101 or equivalent make as approved by GE..
Supply and fix as in repair contactor ML 2, 32A capacity, 415 Volts rating. Make : L & T Cat No SS90701 or equivalent make as approved by GE.
Supply and fix as in repair contactor ML 1.5, 25A capacity, 415 Volts rating. Make : L & T Cat No SS91851 or equivalent make as approved by GE.
Supply and fix as in repair over load Relay,MN2, currrent ratig 24 -40 A,suitable for MNX Contractor, 415 Volts rating. Make : L & T Cat No SS9414500FO or equivalent make as approved by GE.
Supply and fix as in repair over load Relay,MN2, currrent ratig 20- 33 ,suitable for MNX Contractor, 415 Volts rating. Make : L & T Cat NoSS9414500EO or equivalent make as approved by GE.
Supply and fix as in repair over load Relay,MN2, currrent ratig 14- 23 ,suitable for MNX Contractor, 415 Volts Make : L & T Cat No SS9414500DO or equivalent make as approved by GE.
Supply and fix as in repair over load Relay,MN2, currrent ratig 9- 15,suitable for MNX Contractor, 415 Volts Make : L & T Cat No SS9414500BO or equivalent make as approved by GE.
Supply and fix as in repair Auxiliary contactor of 2NO & 2NC, suitable for MNX contractor, 415 Volts rating. Make : L & T Cat No CS94114 or equivalent as approved by GE.
Supply and fix as in repair Single Phase Preventer auto reset, 50 V unbalance. Make : Minilec Cat No VSP3 or equivalent make as approved by GE.
Supply and fix copper conductor cable multi stranded sheathed 3 core of 1100 volts grade of following sizes:-
M& L for plain cement concret (1:2:4) type B2 using 40 mm graded stone aggregate as in foundation/ platform for road repair & other works complete all as specified add as directed. Note- Demolition of old existing plateform/ foundation included in quoted rate.
Supply and fix double flanged single door type swing check reflux (Non return) with by pass arrangement valve in repair confonning to IS-5312 of size 150 mm including supply and fixing suitable size of nut bolts washer and gasket etc.complete all as directed. Make : Zoloto or equivalent make as approved by GE.
All as per item No 43 here-in-before but 100 mm.
All as per item No 43 here-in-before but 80 mm.
All as per item No 43 here-in-before but 50 mm.
Taking up steel water tubing and connection from trench/wall/floor , bore of pipe 100 mm.
All as per item No 44 here-in-before but 80 mm dia
All as per item No 44 here-in-before but 50 mm dia
All as per item No 44 here-in-before but 40 mm dia
All as per item No 44 here-in-before but 25 mm dia
All as per item No 44 here-in-before but 20 mm dia
All as per item No 44 here-in-before but 15 mm dia
M & L for GI water tubing medium grade including all fittings fixed complte laid in wall/ ceiling/ floor of 100 mm dia all as specified and directed.
All as per item No 51 here-in-before but 80 mm dia but laid in wall/ ceiling/ floor.
All as per item No 51 here-in-before but 50 mm dia but laid in wall/ ceiling/ floor
All as per item No 51 here-in-before but 40 mm dia but laid in wall/ ceiling/ floor
All as per item No 51 here-in-before but 25 mm dia but laid in wall/ ceiling/ floor
All as per item No 51 here-in-before but 20 mm dia but laid in wall/ ceiling/ floor
All as per item No 51 here-in-before but 15 mm dia but laid in wall/ ceiling/ floor
M & L for M S Pipe of heavy gread including all fittings(including flange and nut bolt) required for used as a colum pipe in bore well or laid in wall/ ceiling/ floor fixed complte of 150 mm dia all as specified and directed.
M & L for M S Pipe of heavy gread including all fittings(including flange and nut bolt) required for used as a colum pipe in bore well or laid in wall/ ceiling/ floor fixed complte of 100 mm dia all as specified and directed.
M & L for M S Pipe of heavy gread including all fittings (including flange and nut bolt) required for used as a colum pipe in bore well or laid in wall/ ceiling/ floor fixed complte of 80 mm dia all as specified and directed.
M & L for M S flange and joining by weldiny for following dia of pipe complete of all as specified and directed.
for 150 mm dia pipe
for 100/ 80 mm dia pipe
M & L for ductile iron, s/ s, including specials, class "k-7",100 mm dia all as specified and directed.
M & L for rubber or fibre board gasket nuts, bolts which used in flange jointing after taking down old one etc as directed of following sizes
dia 150 mm
dia 100 mm
dia 80 mm
M & L for run lead joint including taking down old joint of CI pipe 150 mm dia
M & L for run lead joint including taking down old joint of CI pipe 100 mm dia
M & L for run lead joint including taking down old joint of CI pipe 80 mm dia
S & F for Gun metal gate valve with iron wheel head, screwed down iron pipe of 50 mm bore after taking down old unserviceable valve
S & F for Gun metal gate valve with iron wheel head, screwed down iron pipe of 40 mm bore after taking down old unserviceable valve
S & F for Gun metal gate valve with iron wheel head, screwed down iron pipe of 32 mm bore after taking down old unserviceable valve
S & F for Gun metal gate valve with iron wheel head, screwed down iron pipe of 25 mm bore after taking down old unserviceable valve
S & F for Gun metal gate valve with iron wheel head, screwed down iron pipe of 20 mm bore after taking down old unserviceable valve
S & F for Gun metal gate valve with iron wheel head, screwed down iron pipe of 15 mm bore after taking down old unserviceable valve
M & L for 40 mm dia PVC ball valve high pressure with polythene float complete after taking down old unserviceable valve. Make : Prayag or equivalent make as approved by GE.
M & L for 25 mm dia PVC ball valve high pressure with polythene float complete after taking down old unserviceable valve. Make : Prayag or equivalent make as approved by GE.
M & L for 20 mm dia PVC ball valve high pressure with polythene float complete after taking down old unserviceable valve. Make : Prayag or equivalent make as approved by GE.
M & L for 15 mm dia PVC ball valve high pressure with polythene float complete after taking down old unserviceable valve. Make : Prayag or equivalent make as approved by GE.
M & L for 150 mm dia butter fly valve made of S.G. iron disc including all accessories after taking down old unserviceable valve. Make : C & R
M & L for 100 mm dia butter fly valve made of S.G. iron disc including all accessories after taking down old unserviceable valve Make : C & R or equivalent make as approved by GE.
M & L for 80 mm dia butter fly valve made of iron including all accessories after taking down old unserviceable valve Make : C & R or equivalent make as approved by GE.
M & L for 65 mm dia butter fly valve made of iron including all accessories after taking down old unserviceable valve Make : C & R or equivalent make as approved by GE.
M & L for 50 mm dia butter fly valve made of iron including all accessories after taking down old unserviceable valve Make : C & R or equivalent make as approved by GE.
M & L for 40 mm dia butter fly valve made of iron including all accessories after taking down old unserviceable valve. Make : C & R or equivalent make as approved by GE.
S & F for 150 mm dia CI sluice valve both side flanged with SS spindle incl accessories after taking down old unserviceable valve.
S & F for 100 mm dia CI sluice valve both side flanged with SS spindle incl accessories after taking down old unserviceable valve.
S & F for 80 mm dia CI sluice valve both side flanged with SS spindle incl accessories after taking down old unserviceable valve.
S & F for 100 mm dia bronze vertical check valve after taking down old unserviceable valve.
S & F for 80 mm dia bronze vertical check valve after taking down old unserviceable valve.
S & F for 50 mm dia bronze vertical check valve after taking down old unserviceable valve.
S & F for 25 mm dia bronze vertical check valve after taking down old unserviceable valve.
S&F Foot Valve CI conforming to IS 4038, complete of size 150 mm dia
Construction of measonary valve pit chamber with burnt brick (Sub class "B") in cement mortor (1:6) and 10 mm thick plastering in cment mortar 1:4 and PCC (1:4:8) type D-2 in foundation bed or size internally on 1000 mm x 1000 mm x 1000 mm with 3 mm thick MS sheet cover with locking arrangement hinged with 40 x 40 x 5 mm angle iron frame embeded in PCC (1:3:6) type C-1 etc including painting with two coats of synthetic enamel paint over a coat of red oxide primer to all steel surfaces completed including earth work all as specified and directed.
Construction of measonary valve pit chamber with burnt brick (Sub class "B") in cement mortor (1:6) and 10 mm thick plastering in cement mortar 1:4 and PCC (1:4:8) type D-2 in foundation bed or size internally on 600 mm x 600 mm x 600 mm with 3 mm thick MS sheet cover with locking arrangement hinged with 40 x 40 x 5 mm angle iron frame embeded in PCC (1:3:6) type C-1 etc including painting with two coats of synthetic enamel paint over a coat of red oxide primer to all steel surfaces completed including earth work all as specified and directed.
Repir to existing valve chamber by replacing MS cover plate 3 mm thickness & MS angle iron (40 X 40 X 5) mm size incl PCC Type B1(1:2:4) with 20 mm graded stone aggregrate for fixing of MS angle iron frame suitable for (1000 x 1000 x 1000) mm size valve chamber also inc with dismantling of old U/S MS plate & angle iron all as specified and directed along with provision of locking arrangement and Handles.
Repir to existing valve chamber by replacing MS cover plate 3.15 mm thickness & MS angle iron (40 X 40 X 5) mm size incl PCC Type B1(1:2:4) with 20 mm graded stone aggregrate for fixing of MS angle iron frame suitable for (600 x 600 x 600) mm size valve chamber also inc with dismantling of old U/S MS plate & angle iron all as specified and directed along with provision of locking arrangement and Handles.
S&F in repair Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of dia 15 mm,
M & L for M S Pipe of heavy gread including all fittings required for used as a colum pipe in bore well or laid in wall/ceiling/floor fixed complte of 150 mm dia all as specified and directed.
M & L for M S Pipe of heavy gread including all fittings required for used as a colum pipe in bore well or laid in wall/ceiling/floor fixed complte of 100 mm dia all as specified and directed.
M & L for M S Pipe of heavy gread including all fittings required for used as a colum pipe in bore well or laid in wall/ceiling/floor fixed cfixed complte of 80 mm dia all as specified and directed.
Supply and fix MS short piece of dia 150mm to 40mm of size 0.22 Rm to0.60 Rm with one end flenged for filteration pipe line as per sample and directed.
Supply and fix MS bend of dia 80 to 150 mm , 90 degree with one end flanged suitable for filteration pipe line as per sample and directed.
Excavation in trenches not exc 1.5m wide & not exc 1.5m in depth for lead joint /other leakage repair or foundation, getting out in soft/ loose soil.
Excavation in trench in hard/dence soil not exc. 1.5 mtr width and n. Exc 1.5 mtr in depth and getting out for lead joint /other leakage repair or foundation , getting out in soft/ loose soil.
Returning, filling in trenches including spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/ loose soil.
Supply and fix in replacement CPVC pipe of size 75 mm inner dia in trenches high pressure CPVC pipes shedule 40 pipes and plain CPVC shedule 80 fittings including all necessay fittings, like Elbow, Tee, Socket, Reducer, bushings , step over bends ,end caps, End plugs, etcand with CPVC solvents cement complete all as specified and directed. Make: Supreme/ Eurotech/ Astral/ SFMC
Supply and fix in replacement CPVC pipe of size 50 mm inner dia in trenches high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, like Elbow, Tee, Socket, Reducer, bushings, step over bends, end caps, End plugs, etcand with CPVC solvents cement complete all as specified and directed. Make: Supreme/ Eurotech/ Astral/ SFMC
Supply and fix in replacement CPVC pipe of size 40 mm inner dia in trenches high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, like Elbow, Tee, Socket, Reducer, bushings, step over bends, end caps, End plugs, etcand with CPVC solvents cement of size 40 mm dia complete all as specified and directed. Make: Supreme/ Eurotech/ Astral/ SFMC
Supply and fix in replacement CPVC pipe of size 25 mm inner dia in trenches high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, like Elbow, Tee, Socket, Reducer, bushings, step over bends, end caps, End plugs, etcand with CPVC solvents cement complete all as specified and directed. Make: Supreme/ Eurotech/ Astral/ SFMC
Supply and fix in replacement CPVC pipe of size 20 mm inner dia in trenches high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, like Elbow, Tee, Socket, Reducer, bushings, step over bends, end caps, End plugs, etcand with CPVC solvents cement complete all as specified and directed. Make: Supreme/ Eurotech/ Astral/ SFMC
Supply and fix in replacement CPVC pipe of size 16 mm inner dia in trenches high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, like Elbow, Tee, Socket, Reducer, bushings, step over bends, end caps, End plugs, etcand with CPVC solvents cement complete all as specified and directed. Make: Supreme/ Eurotech/ Astral/ SFMC
M & L for CPVC Ball Valve of size 50 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed. Make: Supreme/ Eurotech/ Astral/ SFMC
M & L for CPVC Ball Valve of size 40 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed. Make: Supreme/ Eurotech/ Astral/ SFMC
M & L for CPVC Ball Valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed. Make: Supreme/ Eurotech/ Astral/ SFMC
Supply and fixing in replacement of Rotational mouldede polyethylene water storage tanks (cylinderical vertical with closed top) of capacity 500 ltr cap. Liters hoisted & fixed in position incl taking out u/s old one complete all as specified and directed.. Make : Sintex (ISI)/ Aquatech or equivalent make as approved by GE.
Supply and fix Gun metal Gate / Globe valve with iron wheel head, screwed both ends suitable for fixing with CPVC pipe of outer dia 50 mm and taking down old unsrviceble valves complete all as specified and as directed.
Supply and fix Gun metal Gate / Globe valve with iron wheel head, screwed both ends suitable for fixing with CPVC pipe of outer dia 40 mm and taking down old unsrviceble valves complete all as specified and as directed.
Supply and fix Gun metal Gate/ Globe valve with iron wheel head, screwed both ends suitable for fixing with CPVC pipe of outer dia 25 mm and taking down old unsrviceble valves complete all as specified and as directed.
S/F float valve synthetic(PVC) of size 20 mm dia high pressure with polythene ball of size 6" dia and flynut including taking down old one complete all as specified and directed
Hindustan Traders (BID ID -3141967)
M. M. C. AND CO (BID ID -3141709)
A S ENTERPRISE (BID ID -3142561)
M/S RAJESH TRADING CORPORATION (BID ID -3142213)
NICE INFOTECH (BID ID -3141897)
RAY STANDARD ENGG CO. (BID ID -3142451)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .