PROVISION OF FIRE ALARM SYSTEM AT MH2 BSF AND 01 NO OF 10HP MONOBLOC PUMPSET FOR EXISTING STATIC WATER TANK NEAR ATC NEW GARRAGE AND AC AT BATTERY WORKSHOP AT E HANGAR AND P8I STORE AT INS RAJALI ARAKKONAM

Supply and fix Analog Addressable Fire Alarm Panel (Wall Mount, 4 Loops, Premium License) both analog addressable and conventional technologies, with a modular design and capable of connecting periphery devices in stub or loop topologies. Each peripheral (e.g., fire detectors, manual call points) shall be represented as single loop elements, and logical zones shall be grouped according to the building infrastructure. (a) Modular Design: Solid metal housing to house panel hardware, cabling, and batteries. Functional modules (addressable loops, conventional zones, inputs, outputs, serial interfaces) plugged into slots on a rail. Modules are hot-swappable (replaceable without power interruption or reprogramming). (b) Capacity: Supports up to 4 analog addressable loops, each capable of managing up to 1,016 loop elements. Can handle up to 512 automatic fire detectors and manual call points as per EN54 part 2. Flash memory stores configuration, settings, and firmware. (c) Panel Networking: Capable of connecting up to 32 panels, keypads, and information servers. Supports several network topologies (CAN loop, Ethernet loop, redundant Ethernet and CAN loop). Maximum distance between nodes: 1 km (can be extended up to 40 km with fiber optic media converters). (d) Alarm Indication: 7” touchscreen display with a minimum resolution of 800x480 pixels, clear, intuitive graphical interface. Alarm messages will show type, triggering element, and location. Acoustical signal (min 65 dB) to alert operators. LED indicators (Red for fire, Yellow for fault, Green for idle) to show system status. (e) Alarm Verification: Features day/night modes for alarm verification, with delayed or immediate responses based on operator presence. Verification timer (max 6 minutes) for manual confirmation of alarm location. Automatic activation of signaling and fire protection equipment if no action is taken in time.

Supply and fix microprocessor-based loop modules capable of supporting up to 254 devices with a line length of up to 1600m/3000m based on cable type. Modules must be hot-pluggable, encapsulated, include an LED test button, and have visible front fascia for fault identification and Loop cards should be replaceable without requiring reprogramming combination complete all as specified and directed. Make: BOSCH/FIRE THORN/GAMEWELL

Supply and fix EN54/VdS-certified addressable double-action MCPs along with Key (break glass with push button) featuring alarm LED indication and inbuilt fault isolators.MCP must include onboard electronics for addressing and support both surface and flush mounting complete all as specified and directed. Make: BOSCH/FIRE THORN/GAMEWELL

Supply and fix EN54/VdS-certified addressable loop-powered fire alarm sounders with inbuilt fault isolators, programmable tones, and <5mA current consumption. Sounders must support synchronization, volume adjustment via FACP, and dual functionality as strobes or detector bases. Includes all necessary accessories for installation and power complete all as specified and directed. Make: BOSCH/FIRE THORN/GAMEWELL

Supply and fix EN54/VdS-certified addressable loop-powered strobes with red flash (≥1Hz), minimum 2 cd output, and ≤10mA current consumption.Strobes must include inbuilt fault isolators (or external if not integrated), support DIP switch or panel addressing, and integrate into detection loops only. Capable of functioning as sounder cum strobe, with ease of testing, drill programming, and maintenance via the FACP complete all as specified and directed. Make: BOSCH/FIRE THORN/GAMEWELL

Supply and fix EN54/VdS-certified, addressable loop-powered monitor modules with 2 independent inputs for monitoring third-party devices.Modules must support contact, voltage, and EOL resistor monitoring with programmable open/close contact logic and include inbuilt or external fault isolators. Addressable via DIP switch or panel, and configurable per site application requirements complete all as specified and directed. Make: BOSCH/FIRE THORN/GAMEWELL

Supply and fix Supply of standalone AI-powered flame and smoke detection units with real-time video analytics, designed for early and reliable detection in indoor and sheltered outdoor environments. (a) Core Detection Capabilities AI-Powered Video Analytics: Detect flame (≥1.1% frame width) and smoke (≥1.6% frame width) using embedded AI algorithms. Operating Conditions: Minimum illumination of 1 Lux, infrared-assisted detection at 0 Lux, and up to 20,000 Lux ambient light. Detection Standards: Complies with EN54 fire detection standards (TF1–TF8). Intelligent Configuration: Adjustable verification time, detection area, sensitivity, and exclusion zones. (b) AI-Based Object Detection. Differentiation: Object-based logic to distinguish fire-related elements from background noise. Real-Time Metadata: Instant alarms, historical data storage, and post-event forensic search. (c) System Features. Storage: Dual microSD slots, supports up to 2 TB for local event storage. Data Transmission: H.264/H.265 encoding, 60 fps video and analytics streaming. (d) Power & Communication. Power Options: 12 VDC, 24 VAC (±10%), or PoE. Power Consumption: 7–16 W depending on power source. I/O Interfaces: Audio, Alarm, USB, Fiber, Power Out. (e) Physical and Environmental Specifications. Enclosure: IP66, IP67, IP6K9K, with surface mounting capability. Operating Temperature: PoE: -40°C to +60°C, Direct Power: -50°C to +60°C, Extended: Up to +74°C. Humidity: Operation: 5%–93% RH, Storage: up to 98% RH. (f) Standards & Compliance. Fire Detection: EN54 and VdS certified. Environmental: NEMA Type 4X. Inter-operability: ONVIF Profiles S, G, T, M complete all as specified and directed. Make: BOSCH/FIRE VU/DEF