Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹77.1 L
Closing Date
8 Jan 2024, 8:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
Krishna Reddy G T
Establishing 2x100MVA, 220/110/11kV Sub-station at Mevundi in Mundaragi Taluk, Gadag District by constructing 220kV DC line on 220kV MC/DC towers to LILO One Circuit of 220kV Doni-Koppal DC line to the proposed 220/110kV Sub-station at Mevundi for a distance of 6.872kms using Drake equivalent HTLS Conductor along with associated 110kV lines on Partial Turnkey Basis
KPTCL/2023-24/SS/WORK_INDENT345
KPTCL/2023-24/SS/WORK_INDENT345
Open
Sub-Station
Two Tender Document System(Two Cover)
KPTCL CEE Corporate Office Tendering and Procurement Bengaluru
4 documents required · 4 mandatory
Documentary proof for Clause No. 3.2(b)(i) of ITT such as P.O, LOI/LOA, DWA, Work done Certificates, Performance Certificates issued by the end users not below the rank of Executive/Divisional Engineer
Documentary proof for Clause No. 3.2(b)(ii) of ITT such as P.O, LOI/LOA, DWA, Work done Certificates, Performance Certificates issued by the end users not below the rank of Executive/Divisional Engineer
Documentary proof for Clause No. 3.2(d) (A)(a) of ITT HTLS Conductor Manufacturer such as ISO 9001/9002 certificate, , P.O./LOI/LOA/DWA copies/completion certificates/ performance certificates issued by the end users not below the rank of Executive/Divisional Engineer for having experience of design, manufacturing, testing and supply of HTLS conductor of same technology as stipulated in technical specification of the subject tender for a period of 5 years
Documentary proof for Clause No. 3.2(d) (A)(b) of ITT HTLS Conductor Manufacturer such as P.O./LOI/LOA/DWA copies/performance certificate issued by the end users i.e., Indian Utility/Consumer not below the rank of Executive Engineer for having supplied HTLS Conductor of the same size or of higher cross section as envisaged and same technology as in technical specification of the subject tender in the last 10 (Ten) years and for satisfactory performance for a period of 2 years for the required quantities
Documentary proof for Clause No. 3.2(d) (A)(c) of ITT Type Test certificates of HTLS conductor as per relevant IEC standards and KPTCL specifications not older than seven (07) years as on the last date of submission of bid
Documentary proof Clause No. 3.2(d) (A)(c) of ITT such as list of all the type tests carried out as per latest IEC and KPTCL specifications indicating reference of relevant clauses of IEC and KPTCL specifications test description / details and date of testing along with the copies of the Type test reports
Audited financial statements including Balance sheets, Profit and Loss statements, Turnover Certificate, Auditors Reports of the last five years preceding the date of bid submission of the Bidder & Consortium member(In case of Consortium)
The Tenderer shall upload Bankers Certificate duly signed by authorized person in the prescribed format as at Annexure XVIII of Section-4 and as per the clause no.3.3 (b) of ITT (Liquid Assets and /or availability of credit facilities)
Documentary proof for Clause No: 3.6 of ITT: Assessed available tender capacity such as, Statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent as sought in Note of the said clause in the prescribed format as in clause No: 1.5 of Qualification Information
Self declarations of Lead Bidder Consortium partner (In case of Consortium) in respect of Litigation disqualification due to non-performance, Risk cost clause and Restriction on border sharing as specified in Annexure-XVI Annexure-XVII as per Clause No.2.4 of ITT above.
Details of Works on hand and Ongoing contractual commitments
Type test reports as per tender documents / technical specifications.
Consortium Agreement (In case of Consortium)
Power of Attorney in favour of all the persons signing the documents, Power of Attorney for Consortium, combined power of attorney signed by the signatories of all the members of consortium as an evidence of authorization for nominating leader (Prime Bidder) of consortium
Copies of original documents defining the Constitution or Legal Status, place of Registration and Principal place of Business of the Bidder, written Power of Attorney to the Signatory of the Bid to commit the Bidder to the Contract along with the resolution passed in this regard by the Board of Directors / all the Partners of the Firm
Valid Super Grade Electrical Contractors License of both Lead Bidder & Consortium partner (in case of Consortium) issued by the Govt. of Karnataka as on the date of bid submission Clause No.2.3 of ITT above
Certificate of Incorporation of the Individual/Consortium or any relevant document in respect of Partnership/Proprietorship firms as per the tender document
The bidder and Consortium Partner In case of Consortium, should have valid GST registration with GSTIN number PAN Card and ISO Certificates. Note: The successful Bidder and his consortium partner who have GST registration in other States should have GST registration in the State of Karnataka mandatorily at the time of execution of the Contract Agreement
No Deviation Certificate
Letter of Undertaking as in Annexure-V
The Qualification and experience of key Personnel proposed for carrying out the Work
Description of the Tools & Plant available with them for execution of the Work
An undertaking to source the supply of equipment/material from Vendors who meet the eligibility clauses regarding restriction on procurement from a country which shares land border with India as specified in Annexure- XVII as per Clause No. 3.9.7 of ITT above
All self declarations, legally enforceable deeds & Undertakings as per terms and conditions of the tender
All details as called for in the Technical specifications of all the equipments/ materials of the Tender
Undertaking stating that event of order, Bidder/Tenderer will conduct and submit the type test reports of High Temperature Low Sag (HTLS) Conductor of same type & design as tendered at his cost, at the test houses mentioned 3.2(d) (A)(c) of ITT before commencing the deliveries without affecting the delivery schedule
Documentary proof for Clause no. 3.2(d) (A)(d) of ITT such as Calculation for the Ampacity for HTLS Conductor along with supporting calculations for AC resistance as indicated in clause 1.2 & 1.3 of Technical specification for HTLS conductor, GTP of HTLS Conductor as per the format specified in Technical specification and Sag Tension calculations at various conditions mentioned in clause no.1.4 of Technical specification for HTLS Conductor
undertaking stating that, in the event of an Award, Bidder will procure HTLS Conductor as tendered from the manufacturers who meet the stipulated requirements respectively
undertaking: Legally enforceable Deed of Undertaking on Rs.200/- Stamp Paper by Bidder and HTLS manufacturer
₹7,500
₹77.1 L
7 Dec 2023
7 Dec 2023
9 Jan 2024
7 Dec 2023
POWER TRANSFORMERS:
a) 100 MVA, 220/110/11 kV Power Transformer, 3 Ph, 50 Hz, Core type ,2 winding Transformer star/delta, vector group: Yna0d11, OLTC, bushing CT for tertiary of ratio 1000/1 A, 5P...
FIRE FIGHTING EQUIPMENTS:
a) Supply, Erection & Testing and Commissioning of Nitrogen Injection fire extinguishing system including fire exinguishing cubical, control box, online testing facility , et...
b) Supply, Erection & Testing and Commissioning of Nitrogen Injection fire extinguishing system including fire exinguishing cubical, control box, online testing facility , etc as per specification exc...
CIRCUIT BREAKER : SF-6 Circuit Breakers with rigid, bi-metallic terminal connector suitable for Drake ACSR with spring / semi pneumatic /pneumatic type operating mechanism and with mounting structure ...
ii) 220kV, 1250A, 50kA SF6 CB
iii) 110 kV, 1250 A, 40 KA SF6 CB
ISOLATORS : Isolators including marshalling box,Rigid type terminal connectors with solid core cylindrical post insulators as per technical specifications.
I) 220 kV, 2500 A, 40 kA class double break ...
2) Upright mounting type without Earth Switch LPH 8250 mm
3) Upright mounting type without Earth Switch LPH 5750 mm
4) Underhung type without Earth Switch 12850 mm Mounting height
II) 220 kV, 1250 A, 40 kA class double break motor operated isolator with solid core insulators
1) Upright mounting type without Earth Switch LPH 8250 mm
2) Upright mounting type without Earth Switch LPH 5750 mm
3) Underhung mounting type without Earth Switch 12850 mm Mounting height
III) 110kV, 1250 A, 40 kA class double break motor operated isolators with solid core insulators as per technical specifications
1) Upright mounting type with manually operated Earth Switch LPH 4600...
2) Upright mounting type without Earth Switch LPH 6350mm
3) Upright mounting type without Earth Switch LPH 4600mm
4) Underhung Mounting without Earth Switch
Note: Terminal connectors for Isolators
a) Rigid type terminal connector suitable for double MOOSE ACSR conductor - 54 Nos
b) Rigid type suitable for Drake...
CURRENT TRANSFORMERS :
Current transformer ,single phase Oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR/Twin Moose with Marshalling KIOSK complete as per te...
2) 220 kV class, 40 KA, CT of ratio 1200-800-600-300 /
1-1-1A with additional 2 cores of 1200/1A type-1
(2Nos. main CTs are used as NCTs) (required for transformer)
For Metering : Accuracy 0.2s, Bu...
3) 110 kV class, 31.5KA, CT of ratio 600-400 /1-1-1A Type-2 (required for 100MVA Transformer & Bus coupler)
For Metering : Accuracy 0.2s, Burden 10 VA
For Backup protection : Accuracy 5P20. Burden 30 ...
4)110kV Class, 31.5KA CT of Ratio 200-100/1-1-1A (required for 10MVA,110/11kV Transformer
For Metering: Accuracy 0.2s, Burden 10VA
For Backup Protection: 5P20, Burden 30VA
For Differential/Distance P...
5) 110kV Class, 31.5KA CT of Ratio 400-200/1-1-1A, Type-3 for lines.
For Metering: Accuracy 0.2s, Burden 10VA
For Backup Protection: 5P20, Burden 30VA
For Differential/Distance Protection: PS Class, ...
6)11kV class, Outdoor 25 KA, NCT of ratio 1200-800/1-1-1A
(similar rating as incomer of 1250 A, 25 kA 11 kV Switchgear) for 110/11kV transformer.
1. All the CTs in each kV class shall be of one...
VOLTAGE TRANSFORMERS : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR as per Technial specification:
1) 220kV Class,Ratio 220kV/root3/110V/ro...
2) 110 kV class: 110kV/root3/110V/root3- 110V/root3- 110V/root3
Core - 1 Metering : 300 VA, Accuracy class 0.2
Core - 2 Protection : 200 VA, Accuracy class 3P
Core - 3 Protection : Open delta,50 V...
CAPACITIVE VOLTAGE TRANSFORMERS.
Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for drake ACSR as per technical specifications.
220 kV class,4400pF, CVTs 220k...
SURGE ARRESTOR : Surge Arrestor with terminal connector suitable for Drake ACSR as per technical specification
1) 198 kV, 10 KA, class -III, Metal oxide type
2) 96kV, 10KA, Class-II, Metal Oxide Type
Note : 198kV & 96kV Surge arrestors are provided with surge monitors & insulating base.
A) Control and Relay panel Complete SAS Compatible :
1) 220kV line - Type 2L (as per Annexure RPP1-SAS)
2) 220/110/11 kV Power Transformer panel Type 2T
(as per annexure RPP2-SAS)
3) 220kV Bus Coupler Panel - Type 2BC
(as per Annexure RPP1-SAS)
4) 220kV Bus Bar Protection Panel- Type 2BBA
(as per Annexure RPP3-SAS)
5) 110 kV line Panel Type 1L (as per annexure RPP4-SAS)
6) 110 kV Bus coupler panel Type 1BC
(as per annexure RPP6-SAS)
7) 110/11 kV Transformer panel Type 1T1
(as per annexure RPP5-SAS)
8) 11 kV line Panel Type 1L (as per annexure RPP7-SAS)
(Provision for 2 feeders to be made in one panel and provision for 1 capacitor bank & 1 feeder to be made in one panel)
1)The accuracy ...
B) Sub-station Automation System including erection:
(As per Annexure SAS of Relay & Protection Panels and Sub-station Automation specification).
BUS BAR FORMATION :
1. Moose ACSR Conductor -220kV side
(220kV side-500Mtr and 110kV side -2600mtr)
I) RIGID BUS WITH TAPS & CLAMPS : i) Aluminium Tube conforming to 6340 WP of IS-5082 / 1969 (BS 1600-Sch.40) of 75 mm size
a) 220 kV side -546Mtr,
b) 110kV side...
ii) Aluminium Tube conforming to 6340 WP of IS-5082 / 1969 (BS 1600-Sch.40) of 63 mm size for connecting isolator to vertical tap
a) 220 kV side -282Mtr,
b) 110kV side - 306Mtr,
iii) Inverted 'V' taps made of 63 mm Aluminium Tube
(BS - 1600) of 2500mm vertical height for vertical portion and cross bus on 220 kV Side with rounded off End.
iv) Straight taps made of 63 mm Aluminium Tube (BS - 1600) of 1750mm vertical height for vertical portion and cross bus on 110 kV Side with rounded off End.
II) Post insulator clamps suitable for 75 mm Aluminium pipe and post insulator Solid core type
b) Expansion type
b) Expansion type
c) Sliding type
3) Corona Bell suitable for Aluminium Pipe of Size
a) 75 mm on 220 kV Side -12 Nos.
b) 75 mm on 110kV side-12Nos.
4)End cap suitable for Aluminium pipe of size
a) 63mm on 220kV side
b) 63mm on 110kV side
Post Insulator Solid Core 220kV as per technical specification:
1) For 220kV side -2 units/stack
a) Post Insulators of Rigid Bus -78Nos
b) High level Post Insulators (HPI) for 100 MVA ...
2) For 110kV side -1 unit/stack
a) Post Insulators of Rigid Bus -76Nos
b) High level Post Insulators (HPI) for 100 MVA Transformer - 6Nos & 10 MVA Transformer -3Nos
3) 11kV,120 KN Disc Insulators:
a) 220 kV side - Single Tension string of 16 units each- 12 strings, Double Tension String of 2x16units each - 18 Strings
b) 110 kV line side- Single Tension string ...
4) 11kV,90 KN,Disc Insulator:
a) 220kV side- Single Suspension string of 14 units each
- 6 strings , Double Suspension String of 2x14units each - 24strings.
b) 110kV side- Single Suspension string ...
INSULATOR HARDWARE & CLAMPS as per technical specification:
1) Bolted type Double Tension clamp with hardware suitable for Moose ACSR
2) Bolted type Single Tension clamp with hardware suitable for DRAKE ACSR
a) 220kV side-12Nos., b) 110kV side-60 Nos.
3) Bolted type Suspension clamp with hardware suitable for Double Moose ACSR
4) Bolted type Suspension clamp with hardware suitable for Drake ACSR a) 220 kV side -6Nos., b) 110kV side-27Nos.
5) C type Wedge connectors:
a) C type Wedge connectors suitable for Moose - Moose
b) C type Wedge connector (T type) suitable for Drake - Drake
a) 220kV side - 24Nos, b) 110kV side - 102Nos.
c) C type Wedge connector (T type) suitable for Lynx - Drake (for 110kV side)
6) Connector suitable of High Ampacity conductor (HTLS to Double Moose ACSR)
7) Post Insulator clamp clamp suitable for post Insulator and Drake ACSR - 220kV side - 6 Nos., 110kV side (100MVA transformer -6 Nos., 10MVA transformer - 3 Nos.)
8) Spacers for double Moose ACSR Conductor
Auxiliary Transformer:
Station Auxiliary Transformer with oil,Outdoor type, with off load tap changer in steps of 2.5 % as per specification.
250 kVA, 11 kV/433 V, 3 Ph, Vector group-II Delta / Star ...
LTAC Panel(Indoor)
LTAC panel: 415V,LTAC Panel, 2 I/C ACB 800A+2 O/G SFU 200A+ 8 O/G SFU 100A+14 O/G SFU 63 A +12 O/G SFU 32 A+1B/C SFU 800A+1DG C/O switch 300A
AC Distribution box (Outdoor) :
a) AC distribution Box double front (Outdoor)
24 terminals,1200 x 1350 x 600 mm, 2 I/C of 100 Amps, MCCB 20 KA + 24 O / G MCB 16 Amps + 2 O / G of 100 A HRC fuse
b) AC Distribution box Single front type( Outdoor),
6 terminals 750 x1350 x300 mm, one I/C of 100 A, MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse
LT Power Cable:
a) Power Cable from Auxiliary Transformers to LTAC Panel 1.1kV PVC Insulated 240Sq.mm Al. Cable 3.5 core with Glands /Lugs/ Ferrules
b) PVC insulated Alluminium power cable(AC supply for lighting etc,.)
4CX 70 Sq mm with glands/lugs/ferrules
Supply, Erection Testing & Commissioning of 50kW/62.5kVA 415V, 0.8PF,3 Ph Diesel Generating set, mounted on a base frame,complete with inbuilt fuel tank and battery 1 no. 12V & inbuilt standa...
STATION BATTERY & BATTERY CHARGER :
A) STATION BATTERY :
220 V, 300 AH Battery set consisting of 110 No. cells per bank (Plante Type or Grid Plate Type) as per technical specifications.
B) BATTERY CHARGER :
Battery charger suitable for 2 X 220 V, 300 AH, with float (2 Nos) & float cum boost (2 Nos) type battery charger including control panels, change over arrangements etc., compl...
PVC insulated Copper Control Cable with Lugs / Ferrules.
1.1 kV class. Size of cable:
i) 19 Core 2.5 Sq.mm. Copper Control Cables
ii) 10 Core 2.5 Sq.mm. Copper Control Cables
iii) 4 Core 2.5 Sq.mm. Copper Control Cables
iv) 4 Core 6.0 Sq.mm. Copper Control Cables
v) 4 Core 16.0 Sq.mm. Copper Control Cables
vi) 4 Core 4.0 Sq.mm. Copper Control Cables
vii) 2 Core 70 Sq.mm. Copper Control Cables
viii)1P X 0.5 Sqmm screened cable
2) 11kV XLPE insulated UG Cable:
a) 11 kV class 3C X 95 Sq mm XLPE U G Cable (one combined run for 2 Aux transformer from the 11kV switchgear of 110/11kV transformer)
b) 11 kV class 1 X 1000 Sq mm U G Cable XLPE 1 run of 1CX 1000 sq mm cable from 110/11kV transformer to 11kV switchgear
c) 11 kV class 3C X 240 Sq mm U G Cable XLPE- 3core to be run from 11kV switchgear of 110/11kV transformer to 11kV take off DP structure & 11kV capacitor bank)
3) Cable Termination Kit suitable for following sizes :
A. Indoor type:
a) Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable
b) Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable
c) Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq. mm XLPE cable
B. Outdoor type:
a) Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable
b) Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable
c) Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable
Note:The bidder shall quote unit rates for power cable,control cable and cable duct.The exact requirement of power ...
FIRE FIGHTING EQUIPMENTS WITH NECESSARY MOUNTING STANDS
i) Mechanical Foam Type Extinguisher :
ii) Water type (gas pressure type) 9 Ltr. capacity
iii) Carbon Dioxide Type 4.5 Kgs capacity
iv) Dry chemical powder 6.0kg
v) Sand type G.I Buckets 9 Ltr. capacity
vi) steel stands
Design, Engineering, Supply,erection, testing & commissioning of 2.9 MVAR, 12.1 kV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors with suitable neutral CT and sta...
11kV Isolators & DP structure:
a) 11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR
b) 11kV DP structure with 9 mtrs long RCC poles with provision for mounting roaster isolators
c) 11 kV isolator, double break 400 A, 25 KA capacity with rigid bi-metallic terminal connector suitable for coyote ACSR (for 11kv capacitor bank & for Auxiliary Transformer )
d) Supplying & erection of 11kV DP structure with 9 mtrs long RCC poles with provision for mounting 11kV DB isolator for Auxiliary transformer
MAINTENANCE TOOLS AND PLANTS :
1) Portable (mobile) oil pumps (1/2 HP Air pump 500 to 1000 gallons)
2) Telescopic ladder Aluminium 6 Mtr. Height
3) Ring spanner set
4) Tube spanner set
5) Pipe wrench 24 inch
6) Pipe wrench 18 inch.
7) Hydraulic crimpping tools up to 1000 Sq.mm
8) Rubber hand gloves (15 kV tested)
9) Hand torch 5 Cells
10) Hand torch 3 Cells
11) Insulated cutting plier 12 inch size
12) Insulated cutting plier 8 inch size
13) Line live tester AC/DC 500V
14) Screw driver 18"
15) Screw driver 12"
16) Hammer 8 lbs
17) Hammer 2 lbs
18) Chain pulley block 5 ton capacity
19) Hydraulic jack 5 Ton capacity
20) Pipe derrick suitable for lifting 3 MT and lift of 6 Mtr. height
22) Box spanners
23) Transil oil di-electric break down test kit (with 2.5 mm gap 0-60 kV) Tester
24) Insulation megger 2.5 - 5 kV(Digital)
25) Insulation megger 500 V
26) Multimeter Electromechanical
27) Multimeter Electronic
28) Protective goggles
29) SF-6 Gas leak detector
30) Earth resistance tester
31) Hydraulic shearing machine
32) Threading die set for pipe threading
33) Welding machine (arc welding) 10kVA
34) Heavy duty drilling machine
MISCELLANEOUS ITEMS :
1) Rubber mats 2000 mm x 1000 mm x 12 mm size suitable for 1.1 kV class.
2) First aid box.
3) Shock treatment charts, hard board, laminated with coloured pictures & literature both in Kannada & English.
4) Water filter / Water purifier : Wall mounting type (Aqua-guard type).
5) Sub-station name board duly painted.
6) Fixograph of size 1.5m x 2.5m with English / Kannada alphabets.
7) Door locks 7 levers (Navtal make) (Sizes and capacities to be got approved)
8) Danger board (prohibited) with support structure including fixing in front of the gate
9) Equipments name plates and earthing name plates including fixing at outdoor yard
Furniture for control room staff and maintenance staff:
1) Steel Almirahs 6 1/2 feet
2) Steel Almirahs 6 1/2 feet with glass panel doors
3) Officers tables
4) Steel slotted angle rack (big size)
5) Steel slotted angle rack (small size)
6) Steel dust bins
7) Executive Revolving chairs
8) S type arm chairs
9) Steel folding chairs
Smart Surveillance system (CCTV): using PTZ & fixed cameras, OFC monitoring system, HMI, etc as per bid specification.
Specifications:
Lens type -Auto Focus, 36xOptical Zoom, +10xDigit...
2) Fixed Camera Specifications:
Lens type : Bi-focal auto iris with 10 x digital zoom.
Mode : Day/Night
Image size : 720x486(NTSC)
IP 66 compliant.
Streaming : High Speed
Weather Proof : IP 66 compl...
3) HMI as per specification
4) OFC:6F Armoured Multimode with LIU alomng with required number of SC/ST connectors.
1.Exact location of the cameras to be given at the time of commissioning
2.P/S unit to be housed with out...
PLCC equipments:
1) Wave Trap with clamps 0.5 mH, 1600A, 50 kA, 50-500kHz Suspension type for ph- ph coupling
2) Coupling device LMU+LMDU
3)40 W Analog Carrier cabinet Single channel 40W
4) Protection coupler-4 command version
5) Co axial cable 75 Ohm
6) PLCC EPAX 16/8/8
7) Push Button telephones
8) Battery charger 48V, suitable for 200 AH Battery set
9) Battery set 48V, 200 AH
SDH EQUIPMENT :
1) (STM-16 MADM Upto 3MSP Protected Directions) - Base Equipment (Common Cards, Cross Connect/ Control Cards, Optical Base Cards, Power Supply Cards, Power Cabling, other Hardware and ...
2) Optical Interface
Transceiver Type
S16.1-SFP - 3MSP
3) Tributary Interface
i) E1 Interface card (Min. 16 interfaces per card) - 3MSP
ii) Ethernet interface 10/100 Mbps with Layer-2 switching (Min,2x1Gbps+ 4x100/10 Mbps ports) without SFP - 3MSP.
iii) 1x1000 base LX SFP
(GIGABIT ETHERNET INTERFACES 10/100 MBPS WITH LAYER-2 SWITCHING)
iv) Cabinet Equipment to house SDH Equipment + Optical cards + Tributary Cards, Drop/Insert MUX Equipments and DACS Equipment.
v) Digital protection coupler 8 command of direct fibre-in type with 220 V DC power supply
Station Mandatory Spares
Power Transformer (100 MVA, 220/110/ 11kV) Oil collecting bottle
Terminal Connector clamps
a) Suitable for 245 kV class bushing to suit single Drake ACSR.
b) Suitable for 110 kV class bushing to suit Double Drake ACSR.
a) Drain valve (100mm to 200 mm size) suitable for 220kV class
b) Top/Bottom Filter Valve (50mm to 100 mm size) suitable for 220kV class Transformer
c) Top/Middle/Bottom Oil Sampling Valve with Plug (15-25mm mm size) suitable for 220kV and above class Transformer
d) Header Pipe valve
e) Gate/ Butterfly valves of various sizes ranging from 50 mm to 200mm suitable for 220kV class Transformers
Prismatic Gauge
Starters, contactors, relays
Pressure Relief Device (PRD or PRV)
Oil surge relay
Tap position Indicator
Fixed and moving contacts for diverter switch
Fixed and moving contacts for selector switch 220kV and above class
WTI with 4 contacts, 15 meters capillary length with built in CCU RTD and external remote indicator, range 0-150 deg C with SCADA/SAS compatibility
OTI with 2 contacts, 15 meters capillary length with built in CCU, RTD and external remote indicator range 0-150 deg C with SCADA/SAS compatibility
PT 100 Sensor along with probe of suitable length
Circuit Breaker (CB)
1) Closing coil with resistor
(For one Complete Circuit Breaker):
a) for 220kV CB
b) for 110kV CB
2) Tripping coil with resistor
(For one Complete Circuit Breaker):
a) for 220kV CB
b) for 110kV CB
3) Terminal Pad
(For one Complete Circuit Breaker):
a) for 220kV CB
b) for 110kV CB
4) Terminal connector
(For one Complete Circuit Breaker):
a) for 220kV CB
b) for 110kV CB
SF6 gas cylinders filled with SF6 gas suitable for 1 no of CB(220kV CB & 110kV CB)
1) Copper Contact fingers male & female
(For one Isolator)
a) for 220KV Class
b) for 110kV CB
2) Terminal Pad
(For one Complete Circuit Breaker):
a) for 220kV CB
b) for 110kV CB
3) Terminal connector
(For one Complete Circuit Breaker):
a) for 220KV CB
b) for 110kV CB
Relay Panel Spares
1) All Type of Numerical Relays (1No. each type)
2) Tripcircuit supervision relay(2Nos)
3) Self reset trip relay [1No. each type]
4) Hand reset trip relay[1No. each type]
5) Timer relay [1No. each type]
6) DC supervision relays
7) Flag relays [1No. each type]
8) Auxillary relays [1No. each type]
Mandatory Spares for SAS
1) Bay Control Unit with configuration software
2) Ethernet Switch of each type
3) Optical Cable fibre of longest length
Maintenance and Testing equipment:
1) Fully automatic and Tan delta Capacitance test kit
2) Poratable dissolved gas analyser
3) Moisture measuring kit-KARL FISCHER Type moisture kit
4) SF6 gas filling adaptor kit for Circuit Breaker
5) Measuring & analysing equipment for moisture & air content
6) Micro Ohm meter(1.0 micro-ohm to 199.99 micro ohm)
7) BDV test kit (Digital)
8) Circuit Breaker operational analyzer-DCRM
9) Numerical Relay testing kit
11) Online DC earth fault locator with built-in charger & rechargeable batteries
12) Combined CT & VT analyzer
Check Survey and Towers Spotting Towers :
a) Survey using their own equipment
a) Laying , stringing, tensioning ,clamping, jointing etc. of all 3 phases of Drake equivalent HTLS conductor including hoisting of insulator, fittings of all necessory hardwares & accessories i.e. f...
b) Installing insulator strings complete with necessary Hardwares, Installing and stringing of conductor including fixing of conductor accessories, etc., (including all the conductors in each phas...
ii) Installing and stringing of 7/3.15mm Earthwire including fixing of Earthwire accessories and hardwares for 110kV line
c) Installing of OPGW cable along with associated hardware fittings and vibration dampers for Offline Condition. (220kV Line)
d) 48 fibre(DWSM)-including installation hardware set for 48 fibre approach cabled)
e) FODP 48 F: Indoor type consisting of 2Nos of rack mounted LIU (to be housed in FODP) with 24 ports each FCPC coupling and pigtails.
Erection of Towers (excluding earthing )
1) The tenderers are required to quote the rates taking in to consideration the charges for sorting of towers parts, loading, unloading, stub seti...
Grounding of tower including cost of 40mm dia, 2.5mm thick, class 'C' GI pipe of 3mtrs length as per specifications with 50x6 GI flats 3 mtrs long, salt, charcoal including excavation charges.
Releasing and Restrining of existing Drake ACSR & Ground wire
i) Releasing & Restringing of existing Drake conductor - 220kV line portion
ii) Releasing & Restrining of existing ground wires - 220kV line portion
Releasing and Restrining of existing Lynx ACSR & Ground wire
i) Releasing & Restringing of existing Lynx conductor - 110kV line portion
ii) Releasing & Restrining of existing ground wires - 110kV line portion
Dismantling of existing 220kV Tower
Dismantling of existing type tower parts without stubs including loading and unloading from site to store
1) 220kV DC - A+0 type -1No/3MT
2) 110kV DC - A+0 type - ...
Releasing of existing Lynx ACSR & Ground wire
i) Releasing of existing Lynx conductor
ii) Releasing of existing ground wires
Total weight of the Towers (High Tensile Steel) excluding Bolt & Nuts
Refer Techno Commercial Sheet for Break - up of quantities
Total weight of the Towers (Mild Steel) excluding Bolt & Nuts (including weight of Station Structure and Mounting Structes of Station Portion)
Refer Techno Commercial Sheet for Break - up of quantit...
Total weight of the Bolt & Nuts (including weight of Station Structure and Mounting Structes of Station Portion)
Refer Techno Commercial Sheet for Break - up of quantities
Tower Accessories:
a) Supplying and fixing GI angle 45X45x5 mm 1Mtr length with cleats, bolts nuts as per specification and fixing above 0.5mts length each at inner and outer surface of tower to facil...
b) Supplying and fixing of Barbed wire as per the specification.
c) Number Plates (1 No. per tower)
d) Danger Board (1 No. per tower)
e) Circuit Plates (1 No. per circuit)
f) Phase Plates (Set of 3 Nos.)
g) Earth Bonds300mm long
h) Earth Bonds 450mm long
i) Grounding of tower including cost of 40mm dia, 2.5mm thick, class 'C' GI pipe of 3mtrs length as per specifications with 50x6 GI flats 3 mtrs long, salt, charcoal.
i) HTLS Conductor equivalent to Drake ACSR
iii)Ground wire
Insulators strings suitable for HTLS Conductor equivalent to DRAKE ACSR
i) Single Tension insulator strings consisting of any one of the following:
a) Insulator string consisting of 1X16nos. of 120kN ...
ii) Single Suspension insulator strings consisting of any one of the following:
a) Insulator string consisting of 1X14nos. of 90kN Disc insulators
b) Porcelain long rod insulator string equivalent...
Insulators strings suitable for LYNX ACSR CONDUCTOR :
i) Single Tension insulator strings consisting of any one of the following:
a. Insulator string consisting of 1X8nos. of 90kN Disc insulators
ii) Single Suspension insulator strings consisting of any one of the following:
a. Insulator string consisting of 1X7nos. of 90kN Disc insulators
b. Porcelain long rod insulator string equivalent t...
Insulator Hardwares for HTLS Conductor equivalent to DRAKE ACSR:
i) Single Tension fittings suitable of HTLS conductor equivalent to Drake ACSR including single tension clamp fitting etc complete
ii) Double Tension fittings suitable of HTLS conductor equivalent to Drake ACSR including double tension clamp fitting etc complete
iii) Single Suspension fittings suitable of HTLS conductor equivalent to Drake ACSR including single suspension clamp fitting etc complete
iv) Double Suspension fittings suitable of HTLS conductor equivalent to Drake ACSR including double suspension clamp fitting etc complete
Insulator Hardwares for LYNX ACSR CONDUCTOR:
i) Compression type Single Tension clamp (excluding Disc Insulators) with hardwares & arcing horns suitable for 1X8 units of 90kN Disc insulators to suit...
ii) Compression type Double Tension clamp (excluding Disc Insulators) with hardwares & arcing horns suitable for 2X8 units of 90kN Disc insulators to suit LYNX ACSR conductor
iii) Compression type Single Suspension (excluding Disc Insulators) with hardwares & arcing horns suitable for 1X7units of 90kN Disc insulators to suit LYNX ACSR conductor
iv) Compression type Double Suspension (excluding Disc Insulators) with hardwares & arcing horns suitable for 2X7units of 90kN Disc insulators to suit LYNX ACSR conductor.
NOTE: All the Insulator s...
Accessories for Conductors:
A) HTLS Conductor equivalent to Drake ACSR:
a) Mid Span Compression Joints
b) Repair sleeves
c) Vibration dampers
a) Mid Span Compression Joints
b) Pre formed armour rods
c) Repair sleeves
e) Vibration dampers
Hardwares & Accessories for Groundwire:
a) Mid Span Compression Joints
b) Repair sleeves
d) Single Tension clamps (bolted type)
e) Single Suspension clamps (bolted type)
OPGW Cable and its Accessories:
a) 48Fibre (DWSM) OPGW fibre optic cable for 220kV line (inclusive of conductor offline stringing)
b) Suspension clamp assembly for 48 fibre OPGW
c) Tension fitting Assembly for 48fibre OPGW including all accessories for joint box(splicing location)
d) Tension Assembly for dead end for 48fibre OPGW
e) Tension Assembly -Double Tension pass through for 48fibre OPGW
f) Tension fitting assembly on Suspension tower for 48 Fibre OPGW including all accessories for joint box (splicing location )
g) Vibration dampers for 48fibre OPGW
h) Down lead clamp assembly for 48fibre OPGW
i) Joint box for 48fibre OPGW
j) 48 fibre(DWSM)-including installation hardware set for 48 fibre approach cable
k) FODP 48 F: Indoor type consisting of 2Nos of rack mounted LIU (to be housed in FODP) with 24 ports each FCPC coupling and pigtails.
Station Erection
POWER TRANSFORMERS:
a) 100 MVA, 220/110/11 kV Power Transformer, 3 Ph, 50 Hz, Core type ,2 winding Transformer star/delta, vector group: Yna0d11, OLTC, bushing CT for tertiary of ratio 1000/1 A, 5P...
b)10MVA,110/11kV Power Transformer,3Ph, 50Hz, 2 winding, Delta/Star, Vector Group: DYn11,Core Type winding with OLTC, RTCC Panel etc., complete filled with Transil Oil with 10% spare oil with termina...
CIRCUIT BREAKER : SF-6 Circuit Breakers with rigid, bi-metallic terminal connector suitable for Drake ACSR with spring / semi pneumatic /pneumatic type operating mechanism and with mounting structure ...
iii) 110 kV, 1250 A, 40 KA SF6 CB
ISOLATORS : Isolators including marshalling box,Rigid type terminal connectors with solid core cylindrical post insulators as per technical specifications.
I)& II) 220 kV, 2500 A, 40 kA class double b...
4) Underhung type without Earth Switch 12850 mm Mounting height
III) 110kV, 1250 A, 40 kA class double break motor operated isolators with solid core insulators as per technical specifications
1),2) & 3) Upright mounting type with manually operated Earth Switch ...
4) Underhung Mounting without Earth Switch
Note: Terminal connectors for Isolators
a) Rigid type terminal connector suitable for double MOOSE ACSR conductor - 54 Nos
b) Rigid type suitable for Drake...
CURRENT TRANSFORMERS :
Current transformer ,single phase Oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR/Twin Moose with Marshalling KIOSK complete as per te...
3) 110 kV class, 31.5KA, CT of ratio 600-400 /1-1-1A Type-2 (required for 100MVA Transformer & Bus coupler)
4)110kV Class, 31.5KA CT of Ratio 200-100/1-1-1A (required for 10MVA,110/11kV Transformer)
6)11kV class, Outdoor 25 KA, NCT of ratio 1200-800/1-1-1A
(similar rating as incomer of 1250 A, 25 kA 11 kV Switchgear) for 110/11kV transformer.
1. All the CTs in each kV class shall be of one...
VOLTAGE TRANSFORMERS/CAPACITIVE VOLTAGE TRANSFORMERS. : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR as per Technial specification:
2) 110 kV class: 110kV/root3/110V/root3- 110V/root3- 110V/root3
Core - 1 Metering : 300 VA, Accuracy class 0.2
Core - 2 Protection : 200 VA, Accuracy class 3P
Core - 3 Protection : Open delta,50 V...
SURGE ARRESTOR : Surge Arrestor with terminal connector suitable for Drake ACSR as per technical specification
1) 198 kV, 10 KA, class -III, Metal oxide type
2) 96kV, 10KA, Class-II, Metal Oxide Type
Note : 198kV & 96kV Surge arrestors are provided with surge monitors & insulating base.
A) Control and Relay panel Complete SAS Compatible :
1),2),3) 220kV line / 220/110/11 kV Power Transformer/ 220kV Bus Coupler Panel- Type 2L/2T/2BC
4) 220kV Bus Bar Protection Panel - 2BBA
5),6) &7) 110 kV line Panel, 110 kV Bus coupler panel, 110/11 kV Transformer panel Type 1L/1BC/1T1
8) 11 kV line Panel Type 1L (as per annexure RPP7-SAS)
(Provision for 2 feeders to be made in one panel and provision for 1 capacitor bank & 1 feeder to be made in one panel)
1)The accuracy ...
Total Weight of Station structures including Bolts & nuts
Total Weight of Mounting Structures including Bolts & Nuts
BUS BAR FORMATION :
1) Formation of main/cross bus with Twin Moose -220kV side
2) Formation of main/ cross bus with single Drake 220kV & 110kV side
Post Insulator Solid Core 220kV as per technical specification:
1) For 220kV side -2 units/stack
a) Post Insulators of Rigid Bus -78Nos
b) High level Post Insulators (HPI) for 100 MVA ...
2) For 110kV side -1 unit/stack
a) Post Insulators of Rigid Bus -76Nos
b) High level Post Insulators (HPI) for 100 MVA Transformer - 6Nos & 10 MVA Transformer -3Nos
Auxiliary Transformer:
Station Auxiliary Transformer with oil,Outdoor type, with off load tap changer in steps of 2.5 % as per specification.
250 kVA, 11 kV/433 V, 3 Ph, Vector group-II Delta / Star ...
LTAC Panel(Indoor)
LTAC panel: 415V,LTAC Panel, 2 I/C ACB 800A+2 O/G SFU 200A+ 8 O/G SFU 100A+14 O/G SFU 63 A +12 O/G SFU 32 A+1B/C SFU 800A+1DG C/O switch 300A
AC Distribution box (Outdoor) :
a) AC distribution Box double front (Outdoor)
24 terminals,1200 x 1350 x 600 mm, 2 I/C of 100 Amps, MCCB 20 KA + 24 O / G MCB 16 Amps + 2 O / G of 100 A HRC fuse
b) AC Distribution box Single front type( Outdoor),
6 terminals 750 x1350 x300 mm, one I/C of 100 A, MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse
LT Power Cable:
a) Power Cable from Auxiliary Transformers to LTAC Panel 1.1kV PVC Insulated 240Sq.mm Al. Cable 3.5 core with Glands /Lugs/ Ferrules
b) PVC insulated Alluminium power cable(AC suppl...
STATION BATTERY & BATTERY CHARGER :
A) STATION BATTERY :
220 V, 300 AH Battery set consisting of 110 No. cells per bank (Plante Type or Grid Plate Type) as per technical specifications.
B) BATTERY CHARGER :
Battery charger suitable for 2 X 220 V, 300 AH, with float (2 Nos) & float cum boost (2 Nos) type battery charger including control panels, change over arrangements etc., compl...
PVC insulated Copper Control Cable with Lugs / Ferrules.
1.1 kV class of various Sizes of cable:
i) 19 Core 2.5 Sq.mm. Copper Control Cables-25Km
ii) 10 Core 2.5 Sq.mm. Copper Control Cables-15Km
11kV Switchgear as per Technical Specification:
1)11kV, 500 MVA 1600 A for incomer and 1250 A for feeder Out door switchgear comprising of 1I/C + 6F + 1CB VCBs+1AP shall be simplex panel instead of de...
2) 11kV XLPE insulated UG Cable:
a) 11 kV class 3 X 95 Sq mm XLPE U G Cable
b) 11 kV class 1 X 1000 Sq mm U G Cable
c) 11 kV class 3 X 240 Sq mm U G Cable XLPE
3) Cable Termination Kit suitable for following sizes :
A), B) Indoor & Outdoor type:
a) Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable
b) Heat shrinkable type Ca...
11kV Isolators & DP structure:
a) 11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR
c) 11 kV isolator, double br...
b) 11kV DP structure with 9 mtrs long RCC poles with provision for mounting roaster isolators
d) Supplying & erection of 11kV DP structure with 9 mtrs long RCC poles with provision for mounting 11k...
Earth Mat formation :
1) Supplying and laying MS.Flat 75 x 12 mm flat welding and applying ACB paint to welded portion as per drawing/standard (all materials to be supplied by contractor)
2) Supplying and Providing 25mm dia M.S.Rod 1.05m long earthman spikes including heating, bending top 50mm overlap flattening and making spike edge at the ground level and welding the rod with ground...
3) Grounding of equipments by providing Cast Iron Pipe of 100mm ID 13mm thickness, 2.75 meters long with 2 part clamp out of G.I Flat 50x6 mm continuously welded around the pipe using cast iron weldin...
4) G I flats 75 X 12 mm for earth connection from equipments to earth mat
5) Supplying & fixing 450mm dia X 450mm height 1.5" to 2" Hume pipe collars for earth pits including all lead and lifts etc.,
Station and Yard Lighting (Outdoor and Indoor) Lighting/ Lightning Masts.
i) (Provision made for quoting the rate for Supply & Erection of 10Nos of Lighting/Lightning Mast with Approximate Unit Wei...
Smart Surveillance system (CCTV): using PTZ & fixed cameras, OFC monitoring system, HMI, etc as per bid specification.
Specifications:
Lens type -Auto Focus, 36xOptical Zoom, +10xDigit...
2) Fixed Camera Specifications:
Lens type : Bi-focal auto iris with 10 x digital zoom.
Mode : Day/Night
Image size : 720x486(NTSC)
IP 66 compliant.
Streaming : High Speed
Weather Proof : IP 66 compl...
4) OFC:6F Armoured Multimode with LIU alomng with required number of SC/ST connectors.
1.Exact location of the cameras to be given at the time of commissioning
2.P/S unit to be housed with out...
PLCC equipments:
1) Wave Trap with clamps 0.5 mH, 1600A, 50 kA, 50-500kHz Suspension type for ph- ph coupling
2) Coupling device LMU+LMDU
3)40 W Analog Carrier cabinet Single channel 40W
4) Co axial cable 75 Ohm
5) PLCC EPAX 16/8/8
6) Battery charger 48V, suitable for 200 AH Battery set
7) Battery set 48V, 200 AH
SDH EQUIPMENT :
1) (STM-16 MADM Upto 3MSP Protected Directions) - Base Equipment (Common Cards, Cross Connect/ Control Cards, Optical Base Cards, Power Supply Cards, Power Cabling, other Hardware and ...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Construction of Embankment by excavating the available approved Gravel / Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreadin...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Construction of M40 Grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base in recommended proportions, coarse and fine aggregate conforming to IS 383:2016, maximum...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, pla...
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, pla...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lin ing, including cost of materials, labour, curing as per ...
Providing and laying to required line and slope roofing with corrugated asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain and bitumen washers ...
Providing and fixing ridges, hips with asbestos cement sheet roofing with G.I. J or L hooks, bolts and nuts 8mm. dia G.I.plain and bitumen washers, serrated or plain wings, adjustable ridges, includin...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work ...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inc...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufactur...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...
Providing Mirror of superior make glass 60x45 cm of approved make with plastic frames together with necessary nickle plated clamps, screws and fixing in position over wall as directed (Rate includes c...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and ov...
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm
including the cost of materials, labour charges, required tools and plants etc., complete...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe w...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe w...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe w...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...
Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications...
SUBMERSIBLE CABLE
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest a...
PRESSURE GAUGE :
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
NON - RETURN VALVE :
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
ix) Control Panel BOARD-A:
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, A...
POWER CAPACITOR :
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissionin...
MCB : Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/1...
GALVANISED MILD STEEL TUBES:
Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one e...
Erection elctrification & Commissioning works of pumpsets :
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supp...
Main connections:
Providing and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary ...
Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...
Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...
Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...
Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...
Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100x75x65mm
Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135x75x65mm
Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...
Supplying And Fixing Metal Fan Box with Round Hook.
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth ...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Two Way Switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16A One Way Switch.
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Bell Push
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 129332A DP Switch.
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 12933 6/16A Universal Socket.
Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws.
Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit using necessary machine screws.80 mm.
Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit using necessary machine screws.110 mm.
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Lamp Holder.
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.100 A.
Supplying of on load change over switches 4 poles, AC- 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution).100 A
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...
Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board.16-25 A 2 pole
Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board.63 A 4 pole
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...
Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter With out CT)
Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter
Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.4...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint....
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.15" Sweep (450 mm)
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ba...
Supplying wall mounting fan suitable to operate at singlephase 230v AC. supply.400 mm Sweep
Supplying ......TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed compressor with air cooled condenser, motor capacitor and start run cap...
Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C
Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas...
Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ Batteries.
Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70per lumen maintenance with CRI greater than 80. Power Input 220 240V@ 50/60Hz & ...
Supplying of recess mounting non integral type LED w luminaire comprising of pressure decast or extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree K, CRI...
Supplying Of Light Emitting Diode (LED) Street Light Fittings fabricated with die cast alluminium base with suitable heat sink for heat dissipation. the fitting should comprise efficient electronic dr...
Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per W, life gre...
Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket 1x40/2x40 W fluorescent tube street light fitting of all capacities to GI...
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...
Extra length of GI pipe of class B 19mm dia for down rod.
Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...
Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operati...
Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 50 Sqm...
Spplying & erecting Aluminium End Terminal (Lug)50 Sqmm
Supply of LED Square Recessed Down lighter with 18W System Wattage. Housing shall be with powder coated pressure die cast aluminum alloy with corrosion resistant polyster powder coat and with extended...
Suppling 6 amps 3 way flush/projected by socket and 6 amps flush type SP, switch either surface mounted on a gang box or in a 4 mm thick palstic sheet and fixing over a flush mounted on TW box and wir...
Supplying and fixing PBBC brass straight or slant batten holder and wiring with 60 watts 230 volts lamps
Supplying and fixing drop light on PBBC/ Bakelite using pendent holder PVC insulated twin twisted copper wire of 10/0.3 mm length up to 1000mm one of 60/100 watts lamps of 230 Volts grade and 1 of the...
Supplying and fixing cast alluminium round or oblong type bulk head fitting with G.I.wire surface glass cover with 15 watts 230 volts CFL lamps.
Supplying of 2 feet LED PVC square Batten 14W with high quality diffuser with Life of 25000 burning hours & 70per lumen maintenance with CRI greater than 80. Power input : 220-240V @ 50Hz & power fact...
Supply of recess mounted rolling type LED square or round Down light 12 watts with 4/6W GU 10 LED Lamp Rib Fabricated from Die cast aluminum with white powder coated prewired to mains connector with w...
Fixing all types and all capacities of flourscent/ false celing /spot light /CFL/ LED fittings indoor on the wall /ceiling/rafter/girders using necessary length of 23/0.0076" inch twin twisted PVC in...
Supplying and fixing 32 Amps secutity and energy saving DP switch with Key tag suitable to operate on 230 Volts, 50Hz AC supply and completely wired on existing box.
For lighting =1.00
For Heating=1....
Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (I....
Supplying Exhaust Fan of 1440 RPM of 300mm (12") size with bracket blades complete for HEAVY DUTY of approved make crompton/almonard
Fixing one Exhaust Fan after making a sutaible nitch in the wall finishing with CM and colouring to match the existing wall or brackets with bolts and nuts and 5amps ceiling rose with sufficient leang...
Supplying & fixing 40mm dia class A GI pipe bracket upto 2.7 mtrs long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fi...
Supplying and fixing and wiring earth electrodes for grounding conduit IC cut outs and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5mtrs long buried in a pit. The pit sho...
Supplying and fixing ,imiature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming ...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of appr...
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type)
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Revised Advisory Note.pdf
Others - Advisory Note • 0.41 MB
Pre Bid Meeting Proceedings Mevundi.pdf
Others - Pre Bid Meeting Proceedings • 0.07 MB
Commercial Documents Mevundi SS.pdf
Tender Document • 1.55 MB
Section 7 Technical Specification.zip
Others - Technical Specification • 31.04 MB
Circulars and Guidelines.zip
Others - Circular and Guidelines • 1.41 MB
Section 8 Drawings and Survey Reports.zip
Others - Drawings • 6.15 MB
Detailed NIT Mevundi.pdf
Others - Detailed NIT • 0.60 MB
Section 11a Techno Com Mevundi.xlsx
Techno-Commercial Worksheet • 1.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .