SPECIAL REPAIR TO GI PIPE AND ALLIED WORKS FOR BLDG NO ML342 AND ML343 OF HD ENCLAVE AND PROVISION OF CERTAIN MINOR AND REVENUE WORKS UNDER GE MIS MHOW

Amount

Taking down cement or cement lime plaster on brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc.complete.

M&L for rendering 15mm thick in cement mortar (1:4) mixed with water proofing compound on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified.Note: WPC shall be measured and paid separately.

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M&L for rendering 5mm thick on ceiling, Chajja etc on concrete surfaces in cement mortar 1:3 finished on even and smooth without using extra cement complete all as specified.

M&L for preparation of new plastered surface of wall and applying two coats of exterior weather proof water base emulsion paint white/coloured over a coat of primer complete all as specified and directed

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified

M&L for applying three coats of white wash on new plastered ceiling,chajja surfaces including preparation of the surface complete all as specified

M&L for preparation of new surface of wall and applying three coats of white wash complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified.

M&L for non Skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors over and including 15mm thick screed in CM 1:6 , set and jointed in neat cement slurry and pointed in coloured cement mixed with pigment to match with colour of tile complete all as specified

M&L for glazed ceramic coloured tile of size 300mm x 200mm x 6 to 7mm thick as in dados , skirting over and including rendering 10mm thick in CM (1:4), jointed in neat grey cement slurry and pointed in colour cement to match with colour of tiles complete all as specified

Taking down steel tubing 15mm bore and connections complete all as specified

Taking down steel tubing 20mm bore and connection complete all as specified

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to walls /ceiling or laid in floors complete all as specified

S&F GI tubing 20 mm Bore medium grade with all fittings and fixed complete to walls /ceiling or laid in floors all complete all as specified

S&F in repairs 40mm dia GI tubing medium grade as in spout pipe including cutting in any length as required and fixed to wall ,floor etc complete all as specified

Demolition of cement concrete (unreinforced) in Concrete of any description and in any position not otherwise specifically provided for complete all as specified

M&L for providing water proofing treatment to sunken floor surfaces of RCC slab with the following specifications including taking down and cleaning of old surface all as specified and directed :- (a) Provide PCC (1 : 1.5 : 3) type A0 using 12.5mm graded stone aggregate as in slope of average thickness 50mm mixed with liquid water proofing compound PIDIPROOF LW manufactured by Dr FIXIT or equivalent as approved by GE. (b) Rendering 15mm thick in CM 1:3 mixed with water proofing compound on sides of (Vertical surface) sunken floor slab. (c) Applying first coat of Dr fixit fastflex with a stiff nylon brush and leave 4 to 6 hours for dry. (d) Applying second coat to the direction of 90 degree to the first coat and leave 4 to 6hours for dry. (e) Applying third coat to the direction of 90 degree to the second coat and allow to dry for 4 to 6hours. Note: (a) WPT Shall be done through Manufcturer or through authorised applicator 9b) Liquid WPC shall be measured & paid seperately.

Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or other equivalent as approved by GE.

M&L for plain cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in filling of sunken portion complete all as specified and directed.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate mixed with WPC as in levelling course in floor etc complete all as specified

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white colour (excluding fixing bolts, flushing cistern & flush pipe) including plastic water closet seat, white colour, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device complete all as specified .

S&F in repair wash hand basins, white colour,vitreous china of size 550mm x 400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of waste pipe,waste coupling etc complete all as specified

S&F in repair CP bottle trap 32mm bore for wash basin with inlet and outlet screwed for connection including necessary packing union and cup and fixed.

S&F in repair 32 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf /Sqcm for WHB and sink complete all as specified

S&F in repair 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified

S&F in repair CP brass fancy type 15mm bore bib taps, screwed down and screwed for iron pipe or for brass ferrule complete all as specified

S&F in repair CP fancy type stop valves ,cast copper alloy concealed type , screwed both ends for iron pipe or for union of 15mm bore complete all as specified

S&F in repair stop valve cast copper alloy screwed down , high pressure with crutch or butterfly handle ,screwed both ends for pipe 20mm dia or for unions and fixed complete all as specified

S&F in repair PVC flushing cistern, low or high level of 10 litres capacity with inlet, ball valve, syphonic action type, float and handle, PVC flush pipe , pull or push type including brackets complete.

S&F in repair sink mixer with swinging / rotatable spout including connecting legs & wall flanges complete all as specified Make : Plumber or other equivalent as approved by GE

S&F in repairs Wall mixture chromium plated continental non telephonic wall mixer shower for hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified .Make: Plumber or other equivalent as approved by GE

S&F in repairs Angle Stop valve one way, brass chromium plated, fancy type, fixed to iron pipe or for unions 15mm bore complete.Make: Plumber or other equivalent as approved by GE

S&F in repair fancy type chromium plated two way bib cock of 15mm bore two way bib cock screwed for iron pipe or brass ferrule etc complete all as specified Make: Plumber or other equivalent as approved by GE

S&F health faucet with flexible pipe of one metre length including stand complete all as specified Make: Plumber or other equivalent as approved by GE

S&F in repairs CP brass fancy type shower rose 125mm dia with shower arm 30mm long of approved quality complete all as specified

S&F in repair Stainless steel toilet paper holder of brass cromium plated fixed to wall with brass screws complete all as specified

S&F in repairs soap dish (oval) type mild steel chromium plated of size not less than 50mm dia complete.

S&F in repairs brass chromium plated corner glass shelf 5mm thick including bracket for fixing complete all as specified

S&F in repairs glass shelf assembly consisting of 5.5mm thick sheet glass,shelf 120mm wide including CP bracket guard and railing 600mm long.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm

S&F in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gm) complete all as specified

S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets complete all as specified .

S&F in repairs PVC (SWR) pipes 160mm bore single socketed in any length with rubber ring joints fixed to walls / floors

S&F in repairs PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to walls.

All as per Item No 46 above but except pipe

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints fixed to walls.

All as per Item No 48 above but except pipe

S&F PVC (SWR) bends any radius 110mm dia

S&F PVC (SWR) bends any radius 75mm dia

S&F PVC junction single (single T) 110mm dia equal or unequal with access door.

S&F PVC junction single (single T) 75mm dia equal or unequal with access door.

S&F 100mm stack clamps out of 50 mm x 5 mm thick flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof

S&F 75mm stack clamps out of 50 mm x 5 mm thick flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof

S&F in repair PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement

S&F in repairs brass spindles for bib tap and angle cock as per sample kept in AGE office

S&F in repairs Brass spindle for WHB mixer , Wall Mixer and concealed stop cock as per sample kept in AGE office

S&F in repair of good quality rubber washers for low level flushing cistern complete all as directed.

S&F in repair PVC flush handle for low level flushing cistern

Supply only India rubber washers of suitable size for pillar taps,bib taps

S&F in repair flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern all as specified

S&F in repair jet spray for pedestal pattern WC including flexible pipe and brass chromium plated nuts complete.

S&F in repairs 32mm dia PVC waste pipe fixed to WHB,sink,urinal complete all as specified

Excavating post holes or similar holes, each not exceeding 0.5 cum , getting out in any type of soil including returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filing,sub base of floor etc complete all as specified

S&F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket , framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410 -W (Gde- E- 250) quality- A complete all as specified and as directed.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 all as specified and directed by Engineer-in-Charge

M&L for cutting holes in brick / block walls exceeding half brick but not exceeding one brick thick wall ,built in cement mortar of any description for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required completed all as specified.

M&L for plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregates as in coping, chajja, kerbs, roof padding ,staging of water tank etc including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed .

S&F Pre-painted galvalum aluminium zinc coating steel based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site all as specified and dircted.

S&F Pre-painted galvalum aluminium zinc coating steel based plain steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site all as specified and dircted.

M&L for preparation of new steel surfaces of any description ,over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard/dense soil.

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate ,100mm thick as in subbase ,floor etc complete all as specified

M&L for stone dust under floors or in foundations including watering and consolidation spreading and levelling in layers n exc. 25 mm thick

M&L for 60mm thick Machine pressed rubber moulded precast concrete interlocking paver block with grey cement and pigments of shape as approved by GE ,and any colour and size confirming to IS 15658-2006 of M40 Grade laid over 50 mm (average) thick stone dust cushioning, filling the joints with sand ,compaction by using surface vibrator after filling of joints laid in any pattern as approved by Engineer-In-Charge including packing of sides by plain cement concrete ,finishing the surface even and smooth complete all as specified and as directed. Note : Sand cushioning shall be measured and paid separately .

Supply only chain link MS galvanised fencing any size or type.

M&L for fixing only chain link fencing including line wires, any mesh, size and any type of standerds, rails, straining bolts etc including provision of binding wire etc complete all as specified

S&F mild steel hot rolled equal/unequal angles embedded in concrete and screwing , securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilled holes, notching for wire, etc ; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to conforming to ISI complete all as specified and directed

S&F mild steel round bars 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

S&F mild steel work as in posts and struss of fencing, fillets, plates etc including cutting tops to shape as directed,drilling holes, notching for wire etc including all necessary drilling, bolting or ribeting etc complete confirming to Fe 410-0 or Fe 310-0

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, length n exc 6 cm and dia of neck 11 to 15 mm.

Removing excavated material (soil) to a distance exceeding 1.5 km but not exceeding 5 km away from MoD Land from the starting point and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation,shafts, wells, cespits, manholes pier hold etc n.exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified

M&L for plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundation filing,sub base of floor etc complete all as specified

M&L for plain cement concrete 1:3:6 type C1 using 20 mm graded stone aggregate as in coping including necessary form work ,finished even and smooth complete all as specified.

M&L for brick work by using sub class “B” bricks built in cement mortar 1:4 straight or curved on plan exceeding 6 m mean radius complete all as specified and directed.

M L for rendering 15mm thick plaster in CM 1:4 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified

M&L for Precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, bed plates, blocks, anchorage blocks, cover slabs (for manholes and drains etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary form work ,moulding etc complete all as specified. Note: Reinforcement shall be measured and paid separately under relevant item

M&l for Mild steel deformed TMT bars 8 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete

S&F Reinforced concrete pipes 450 mm bore class NP2, laid and jointed complete with collars complete all as specified

Returing, filling in trenches with soil including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm complete all as specified

Removing excavated material (soil) to a distance exceeding 250 m but not exceeding 500 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified.

sunway associates (BID ID -3093175)

Ms Ajay Builders (BID ID -3093295)

NIDHI CONSTRUCTION (BID ID -3100883)

m/s ajay chandil (BID ID -3100935)

M/S Sunshine Construction (BID ID -3100263)