Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.3 LAccepted-AOC KAJANIBARI DINJAN PO DINJAN DIST TINSUKIA ASSAM786189 | DINJAN | TINSUKIA | ASSAM | 786189 | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹44.6 L+₹1.7 L (3.99%)Rejected-Finance AT MAIN ROAD DANDAI PO PS DANDAI DIST GARHWA | LATEHAR | JHARKHAND | 822112 | L2 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 3 | L3₹45.5 L+₹2.5 L (5.92%)Rejected-Finance K B ROAD WARD NO 11 NORTH LAKHIMPUR PIN 787001 ASSAM | LAKHIMPUR | ASSAM | 787001 | L3 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 4 | L4₹47.2 L+₹4.2 L (9.88%)Rejected-Finance COLLEGE ROAD CHABUA PO CHABUA DIST DIBRUGARH ASSAM 786184 | DIBRUGARH | ASSAM | 786184 | L4 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 5 | L5₹47.2 L+₹4.3 L (10.1%)Rejected-Finance NOT AVAILABLE | L5 | Rejected-Finance HIGHER THAN L1 BIDDER |
Tender Value
₹47.8 L
EMD Value
₹95,600
Closing Date
13 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 872 EWS
GE 872 EWS, C/O 99 APO
SPL REPAIRS/ CONVERSION OF LT OH LINES INTO UG CABLES AND CONNECTED WORKS AT DIV ALFA MESS AND DIV HQ AREA AT LIKABALI MIL STN UNDER GE 872 EWS
2024_MES_642383_1
8573/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
LIKABALI
All as per NIT and Tender documents
7 documents required · 7 mandatory
₹500
GE 872 EWS
₹95,600
Yes
21 Mar 2024
14 Feb 2024
15 Mar 2024
14 Feb 2024
13 Mar 2024
29 Feb 2024
14 Feb 2024 - 22 Feb 2024
Amount
Dismantling of unserviceable broken LT RCC poles/Strut any size including demolition of foundation as required and making good disturbed surface complete all as directed. (Note : Earth work wherever invloved shall be measured and paid separately)
Dismantling/taking down old aluminium steel reinforced (ACSR) conductor of any size from HT/LT overhead line including all jumper etc and keeping serviceable materials in safe custody for reuse in the work (if any) complete all as specified and directed.
Dismantling cross-arms of M.S. channel or angle sections etc. complete and setting aside serviceable materials for re-use with in 50m and removing unserviceable materials from site of work incluidng demolition of PCC foundation and taking out base plate etc complete all as directed by the Engr-in-Charge
Dismantling of insulators of any type from LT poles of any size and type and setting aside complete all as specified and directed.
Taking out unserviceable UG cables of size 10 Sqmm 2 core including brick/sand cusioning etc as cable protection from trenches etc and removing from the site of work complete all as specified and directed. (Note: Excavation and earth work shall be measured and paid seperately)
Taking out unserviceable UG cables of size 16 Sqmm 2 core including brick/sand cusioning etc as cable protection from trenches etc and removing from the site of work complete all as specified and directed. (Note: Excavation and earth work shall be measured and paid seperately)
Taking out unserviceable UG cables of size 25 Sqmm 3.5 core including brick/sand cusioning etc as cable protection from trenches etc and removing from the site of work complete all as specified and directed. (Note: Excavation and earth work shall be measured and paid seperately)
Taking out unserviceable UG cables of size 35 Sqmm 3.5 core including brick/sand cusioning etc as cable protection from trenches etc and removing from the site of work complete all as specified and directed. (Note: Excavation and earth work shall be measured and paid seperately)
Taking out unserviceable UG cables of size 50 Sqmm 3.5 core including brick/sand cusioning etc as cable protection from trenches etc and removing from the site of work complete all as specified and directed. (Note: Excavation and earth work shall be measured and paid seperately)
Taking out unserviceable UG cables of size 70 Sqmm 3.5 core including brick/sand cusioning etc as cable protection from trenches etc and removing from the site of work complete all as specified and directed. (Note: Excavation and earth work shall be measured and paid seperately)
Dismantling existing unserviceable panel board of any size with all accessories after disconnecting all connection and re-routing the cables by using existing cable tray/clmaping where required and making good the disturbed surfaces to match the existing surfaces complete all as directed by the Engr-in-Charge
Dismantling existing unserviceable service connections of any size and any descriptions incluing GI suspension wire after disconnecting all connections complete all as directed by the Engr-in-Charge
Dismantling existing unserviceable earthing system of any descriptions with all accessories including necessary earthwork and excavation as necessary to facilitate dismantling complete all as directed by the Engr-in-Charge
Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, trenches for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.
Excavating in trenches not exc. 1.5 metre wide and exc. 1.5 metre & not exc. 3 metre depth (beyond the first 1.5 metre) for foundation of poles etc and getting out in soft/loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed.
Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.
M & L for Sand cushioning with clean dry sand in trenches for protection of under ground cables (below, above and around the cable laid in trenches) complete all as specified and directed. (Note: Thickness after punning down shall be measured for payment)
Supply and laying locally available best quality, well burnt sub class B bricks (old size), laid dry in trenches for protection of UG cables complete all as specified and directed.
M & L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed.
M & L for Plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed.
M & L for plain cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed.
M & L for Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0 metres long) including one coat of aluminium paint over a coat of red oxide zinc chrome primer and providing 03 Nos band/strap with black/yellow colour paint 300mm apart from the plinth block, numbering of pole painting embedded portion of pole with one coat of black bitumenous paint complete all as specified and directed. (Note : Excavation and Earth work shall be measured and paid separately)
S & F in repair Street light bracket fabricated out of 40mm bore GI tubing, light grade, 1.5m long with one side arm type and along with 02 sets of suitable size of flat iron clamps and nuts, bolts & washers to fix the bracket on steel tubular pole and including painting with two coats of aluminium paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.
S & F in repair street light fittings, LED, 35 Watt, New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 and all accessories including mounting clamps, bolts, nuts and washers and connections complete all as specified and as directed. (Make: Havell's Cat No. ENDURASUNDOWNSL35WLED765PASYBOPC or equivelant of make as per list of manufacturer)
S & F Shock Proof, Rust Proof, Fire Retardant, Non-trasperant, Kiosk, Pole box of size 310mmx210mmx120mm, IP 65, made of Engineering Plastic one piece mopulding, outdoor type, heavy duty with 04 Nos insulated aluminium Bus bar of 60 Amps capacity, mounted on unbreakable insulators, MCB SP, 10Amps complete with aluminium lugs of suitable size suitable for LT cable upto the size 16/25 Sqmm including 02 Nos flat iron 40x3mm clamps with suitable size of mild steel bolts, nuts & washers etc and duly painted on both sides with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed directed. (Make : HENSEL or equivalent model of make as per list of manufacturer)
S & F Three core, PVC insulated, unsheathed, multistranded copper flexible conductor cable, 1100 vols grade ISI marked of size 6 sqmm complete all as specified and as directed.
Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing complete all as specified and directed. (Note: Excavation and earth work will be measured and paid seperately)
Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 2 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing complete all as specified and directed. (Note: Excavation and earth work will be measured and paid seperately)
Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 4 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing complete all as specified and directed. (Note: Excavation and earth work will be measured and paid seperately)
Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 4 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing complete all as specified and directed. (Note: Excavation and earth work will be measured and paid seperately)
Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing complete all as specified and directed. (Note: Excavation and earth work will be measured and paid seperately)
Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing complete all as specified and directed. (Note: Excavation and earth work will be measured and paid seperately)
Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 70 Sqmm 3.5 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing complete all as specified and directed. (Note: Excavation and earth work will be measured and paid seperately)
Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 95 Sqmm 3.5 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing complete all as specified and directed. (Note: Excavation and earth work will be measured and paid seperately)
Laying/fixing only serviceable XLPE insulated UG cable of any size as obtained from taking out above, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing complete all as specified and directed. (Note: Excavation and earth work will be measured and paid seperately)
S & F Rigid non-metalic PVC conduit (25mmdia) exclusive of boxes (junction/ treminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc. complete all as specified and directed.
S & F in repair Vertical TPN DB double door for provision for four pole MCCB upto 160 A incommer 4 way 12 outgoing with IP 43 protectioncomplete all as specified and as directed. (Make : Legrand cat part No. 5077 45 or equivelant of make as per List of manufacturer's)
S & F in repair MCCB 415 Volt 16 KA, 4 Pole, 63 Amps Capacity complete all as specified and as directed . (Make: Legrand Cat Part No. 4200 13 or equivelant of make as per List of Manufacturer's)
S & F in repair MCB SP 6 to 32 Amps, 240 Volts, 10KA, C Curve, complete all as specified and as directed (Make: Legrand cat part No. 4085 87 to 95 or equivalent make as per List of Manufacturer's)
S & F in repair MCB SPN 6-32A Amps, 240 Volts, 10KA, C Curve complete all as specified and as directed (Make: Legrand cat part No. 4086 14 to 17 or equivalent make as per List of Manufacturer's)
S & F Single phase sheet metal enclosure with socket plug top and MCBs having single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20Amp 240V, B-curve complete all as specified and as directed. (Make: Havell's Cat No. DHDPUSN020 or equivelant of make as per List of Manufacturer's)
M & L Earthing complete with GI earth plate electrode 600 mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected with galvanised earth strip of size 25x4mm by means of bolts, nuts, check nuts and washers protected by 40mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, with 40 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 10 cm C/C both ways and suitable handle of 12 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel, wire mesh, aluminium lugs, complete in all respect and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion complete all as specified and as directed by the Engineer-in-Charge.
Supply, Install, Commissioning and testing LT cubical type panel board, CPRI approved factory made, outdoor type, suitable for 415 Volts, 3 Phase, 4 Wire system, 50 Hz supply, made out of 3.15mm thick CRCA sheet, Dust and vermin proof, weather proof (IP54), powder coated with front and rear openable door shutter with seperate hinge door with locking arragnement, totally enclosed type including PCC 1:2:4, Type B-1 foundation of suitable size, and internal wiring with copper conductor cable complete all as specified and directed comprising with the following items: (A) Incomming: (i) MCCB 63 Amps, 4 pole, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 01 No (ii) Phase indicator for (RYB) - 01 sets (B) Outgoing (i) MCB, TPN, 32 Amp, 10 KA - 03 Nos (ii) Digital multifunction meter with 3 Nos CTs of 20/5A - 01 Set (iii) Bus bar 4 strips aluminium of capacity 100 Amps, TPN of suitable size - 01 Set (Note: (i) Panel shall be of factory made and CPRI approved (ii) External terminals with tinned copper has to be provided for trimming the incoming and outgoing cables with suitable lugs of MCCB/MCB (if required) (iii) Necessary excavation and earth work for foundation shall deemed to be included in the unit quoted rate)
Supply, Install, Commissioning and testing LT cubical type panel board, CPRI approved factory made, outdoor type, suitable for 415 Volts, 3 Phase, 4 Wire system, 50 Hz supply, made out of 3.15mm thick CRCA sheet, Dust and vermin proof, weather proof (IP54), powder coated with front and rear openable door shutter with seperate hinge door with locking arragnement, totally enclosed type including PCC 1:2:4, Type B-1 foundation of suitable size, and internal wiring with copper conductor cable complete all as specified and directed comprising with the following items: (A) Incomming: (i) MCCB 63 Amps, 4 pole, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 01 No (ii) Phase indicator for (RYB) - 01 sets (B) Outgoing (i) MCB, SPN, 32 Amp, 10 KA - 08 Nos (ii) Digital multifunction meter with 3 Nos CTs of 20/5A - 01 Set (iii) Bus bar 4 strips aluminium of capacity 100 Amps, TPN of suitable size - 01 Set (Note: (i) Panel shall be of factory made and CPRI approved (ii) External terminals with tinned copper has to be provided for trimming the incoming and outgoing cables with suitable lugs of MCCB/MCB (if required) (iii) Necessary excavation and earth work for foundation shall deemed to be included in the unit quoted rate)
Supply, Install, Commissioning and testing LT cubical type panel board, CPRI approved factory made, outdoor type, suitable for 415 Volts, 3 Phase, 4 Wire system, 50 Hz supply, made out of 3.15mm thick CRCA sheet, Dust and vermin proof, weather proof (IP54), powder coated with front and rear openable door shutter with seperate hinge door with locking arragnement, totally enclosed type including PCC 1:2:4, Type B-1 foundation of suitable size, and internal wiring with copper conductor cable complete all as specified and directed comprising with the following items: (A) Incomming: (i) MCCB 63 Amps, 4 pole, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 01 No (ii) Phase indicator for (RYB) - 01 sets (B) Outgoing (i) MCCB, TPN, 63 Amp, 25 KA, 415 Volt, adjustable tharmel magnetic release - 02 Nos (ii) Digital multifunction meter with 3 Nos CTs of 20/5A - 01 Set (iii) Bus bar 4 strips aluminium of capacity 100 Amps, TPN of suitable size - 01 Set (Note: (i) Panel shall be of factory made and CPRI approved (ii) External terminals with tinned copper has to be provided for trimming the incoming and outgoing cables with suitable lugs of MCCB/MCB (if required) (iii) Necessary excavation and earth work for foundation shall deemed to be included in the unit quoted rate)
Supply, Install, Commissioning and testing LT cubical type panel board, CPRI approved factory made, outdoor type, suitable for 415 Volts, 3 Phase, 4 Wire system, 50 Hz supply, made out of 3.15mm thick CRCA sheet, Dust and vermin proof, weather proof (IP54), powder coated with front and rear openable door shutter with seperate hinge door with locking arragnement, totally enclosed type including PCC 1:2:4, Type B-1 foundation of suitable size, and internal wiring with copper conductor cable completeall as specified and directed comprising with the following items: (A) Incomming: (i) MCCB 63 Amps, 4 pole, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 01 No (ii) Phase indicator for (RYB) - 01 sets (B) Outgoing (i) MCCB, 3P, 63 Amp, 25 KA, 415 Volts, adjustable tharmel magnetic release - 03 Nos (ii) Digital multifunction meter with 3 Nos CTs of 20/5A - 01 Set (iii) Bus bar 4 strips Copper of capacity 100 Amps, TPN of suitable size - 01 Set (Note: (i) Panel shall be of factory made and CPRI approved (ii) External terminals with tinned copper has to be provided for trimming the incoming and outgoing cables with suitable lugs of MCCB/MCB (if required) (iii) Necessary excavation and earth work for foundation shall deemed to be included in the unit quoted rate)
Supply, Install, Commissioning and testing LT cubical type panel board, CPRI approved factory made, outdoor type, suitable for 415 Volts, 3 Phase, 4 Wire system, 50 Hz supply, made out of 3.15mm thick CRCA sheet, Dust and vermin proof, weather proof (IP54), powder coated with front and rear openable door shutter with seperate hinge door with locking arragnement, totally enclosed type including PCC 1:2:4, Type B-1 foundation of suitable size, and internal wiring with copper conductor cable completeall as specified and directed comprising with the following items: (A) Incomming: (i) MCCB 63 Amps, 4 pole, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 01 No (ii) Phase indicator for (RYB) - 01 sets (B) Outgoing (i) MCB, SPN, 32 Amp, 10 KA - 04 Nos (ii) Digital multifunction meter with 3 Nos CTs of 20/5A - 01 Set (iii) Bus bar 4 strips Copper of capacity 100 Amps, TPN of suitable size - 01 Set (Note: (i) Panel shall be of factory made and CPRI approved (ii) External terminals with tinned copper has to be provided for trimming the incoming and outgoing cables with suitable lugs of MCCB/MCB (if required) (iii) Necessary excavation and earth work for foundation shall deemed to be included in the unit quoted rate)
Supply, Install, Commissioning and testing LT cubical type panel board, CPRI approved factory made, outdoor type, suitable for 415 Volts, 3 Phase, 4 Wire system, 50 Hz supply, made out of 3.15mm thick CRCA sheet, Dust and vermin proof, weather proof (IP54), powder coated with front and rear openable door shutter with seperate hinge door with locking arragnement, totally enclosed type including PCC 1:2:4, Type B-1 foundation of suitable size, and internal wiring with copper conductor cable complete all as specified and directed comprising with the following items: (A) Incomming: (i) MCCB 63 Amps, 4 pole, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 01 No (ii) Phase indicator for (RYB) - 01 sets (B) Outgoing (i) MCCB 63 Amps, TPN, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 03 Nos (ii) MCB, TPN, 32 Amp, 10 KA - 02 Nos (iii) MCB, SPN, 20Apms, 10 KA - 01 No (iv) Digital multifunction meter with 3 Nos CTs of 20/5A - 01 Set (v) Bus bar 4 strips Copper of capacity 100 Amps, TPN of suitable size - 01 Set (Note: (i) Panel shall be of factory made and CPRI approved (ii) External terminals with tinned copper has to be provided for trimming the incoming and outgoing cables with suitable lugs of MCCB/MCB (if required) (iii) Necessary excavation and earth work for foundation shall deemed to be included in the unit quoted rate)
Supply, Install, Commissioning and testing LT cubical type panel board, CPRI approved factory made, outdoor type, suitable for 415 Volts, 3 Phase, 4 Wire system, 50 Hz supply, made out of 3.15mm thick CRCA sheet, Dust and vermin proof, weather proof (IP54), powder coated with front and rear openable door shutter with seperate hinge door with locking arragnement, totally enclosed type including PCC 1:2:4, Type B-1 foundation of suitable size, and internal wiring with copper conductor cable complete all as specified and directed comprising with the following items: (A) Incomming: (i) MCCB 63 Amps, 4 pole, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 01 No (ii) Phase indicator for (RYB) - 01 sets (B) Outgoing (i) MCB, SPN, 32 Amp, 10 KA - 08 Nos (ii) Digital multifunction meter with 3 Nos CTs of 20/5A - 01 Set (iii) Bus bar 4 strips Copper of capacity 100 Amps, TPN of suitable size - 01 Set (Note: (i) Panel shall be of factory made and CPRI approved (ii) External terminals with tinned copper has to be provided for trimming the incoming and outgoing cables with suitable lugs of MCCB/MCB (if required) (iii) Necessary excavation and earth work for foundation shall deemed to be included in the unit quoted rate)
Supply, Install, Commissioning and testing LT cubical type panel board, CPRI approved factory made, outdoor type, suitable for 415 Volts, 3 Phase, 4 Wire system, 50 Hz supply, made out of 3.15mm thick CRCA sheet, Dust and vermin proof, weather proof (IP54), powder coated with front and rear openable door shutter with seperate hinge door with locking arragnement, totally enclosed type including PCC 1:2:4, Type B-1 foundation of suitable size, and internal wiring with copper conductor cable complete all as specified and directed comprising with the following items: (A) Incomming: (i) MCCB 63 Amps, 4 pole, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 01 No (ii) Phase indicator for (RYB) - 01 sets (B) Outgoing (i) MCB, SPN, 32 Amp, 10 KA - 11 Nos (ii) Digital multifunction meter with 3 Nos CTs of 20/5A - 01 Set (iii) Bus bar 4 strips Copper of capacity 100 Amps, TPN of suitable size - 01 Set (Note: (i) Panel shall be of factory made and CPRI approved (ii) External terminals with tinned copper has to be provided for trimming the incoming and outgoing cables with suitable lugs of MCCB/MCB (if required) (iii) Necessary excavation and earth work for foundation shall deemed to be included in the unit quoted rate)
Supply, Install, Commissioning and testing LT cubical type panel board, CPRI approved factory made, outdoor type, suitable for 415 Volts, 3 Phase, 4 Wire system, 50 Hz supply, made out of 3.15mm thick CRCA sheet, Dust and vermin proof, weather proof (IP54), powder coated with front and rear openable door shutter with seperate hinge door with locking arragnement, totally enclosed type including PCC 1:2:4, Type B-1 foundation of suitable size, and internal wiring with copper conductor cable complete all as specified and directed comprising with the following items: (A) Incomming: (i) MCCB 63 Amps, 4 pole, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 01 No (ii) Phase indicator for (RYB) - 01 sets (B) Outgoing (i) MCB, SPN, 32 Amp, 10 KA - 17 Nos (ii) Digital multifunction meter with 3 Nos CTs of 20/5A - 01 Set (iii) Bus bar 4 strips Copper of capacity 100 Amps, TPN of suitable size - 01 Set (Note: (i) Panel shall be of factory made and CPRI approved (ii) External terminals with tinned copper has to be provided for trimming the incoming and outgoing cables with suitable lugs of MCCB/MCB (if required) (iii) Necessary excavation and earth work for foundation shall deemed to be included in the unit quoted rate)
Supply, Install, Commissioning and testing LT cubical type panel board, CPRI approved factory made, outdoor type, suitable for 415 Volts, 3 Phase, 4 Wire system, 50 Hz supply, made out of 3.15mm thick CRCA sheet, Dust and vermin proof, weather proof (IP54), powder coated with front and rear openable door shutter with seperate hinge door with locking arragnement, totally enclosed type including PCC 1:2:4, Type B-1 foundation of suitable size, and internal wiring with copper conductor cable complete all as specified and directed comprising with the following items: (A) Incomming: (i) MCCB 63 Amps, 4 pole, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 01 No (ii) Phase indicator for (RYB) - 01 sets (B) Outgoing (i) MCB, TPN, 32 Amp, 10 KA - 02 Nos (ii) MCB, SPN, 20 Amp, 10 KA - 03 Nos (iii) Switch socket combination, 15 Amps, flush type -03 Nos (iv) Digital multifunction meter with 3 Nos CTs of 20/5A - 01 Set (v) Bus bar 4 strips Copper of capacity 100 Amps, TPN of suitable size - 01 Set (Note: (i) Panel shall be of factory made and CPRI approved (ii) External terminals with tinned copper has to be provided for trimming the incoming and outgoing cables with suitable lugs of MCCB/MCB (if required) (iii) Necessary excavation and earth work for foundation shall deemed to be included in the unit quoted rate)
Supply, Install, Commissioning and testing LT cubical type panel board, CPRI approved factory made, outdoor type, suitable for 415 Volts, 3 Phase, 4 Wire system, 50 Hz supply, made out of 3.15mm thick CRCA sheet, Dust and vermin proof, weather proof (IP54), powder coated with front and rear openable door shutter with seperate hinge door with locking arragnement, totally enclosed type including PCC 1:2:4, Type B-1 foundation of suitable size, and internal wiring with copper conductor cable complete all as specified and directed comprising with the following items: (A) Incomming: (i) MCCB 32 Amps, 4 pole, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 01 No (ii) Phase indicator for (RYB) - 01 sets (B) Outgoing (i) MCB, SPN, 20 Amp, 10 KA - 03 Nos (ii) Switch socket combination, 15 Amps, flush type -03 Nos (iii) Digital multifunction meter with 3 Nos CTs of 20/5A - 01 Set (iv) Bus bar 4 strips Copper of capacity 100 Amps, TPN of suitable size - 01 Set (Note: (i) Panel shall be of factory made and CPRI approved (ii) External terminals with tinned copper has to be provided for trimming the incoming and outgoing cables with suitable lugs of MCCB/MCB (if required) (iii) Necessary excavation and earth work for foundation shall deemed to be included in the unit quoted rate)
Supply, Install, Commissioning and testing LT cubical type panel board, CPRI approved factory made, outdoor type, suitable for 415 Volts, 3 Phase, 4 Wire system, 50 Hz supply, made out of 3.15mm thick CRCA sheet, Dust and vermin proof, weather proof (IP54), powder coated with front and rear openable door shutter with seperate hinge door with locking arragnement, totally enclosed type including PCC 1:2:4, Type B-1 foundation of suitable size, and internal wiring with copper conductor cable complete all as specified and directed comprising with the following items: (A) Incomming: (i) MCCB 100 Amps, 4 pole, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 01 No (ii) Phase indicator for (RYB) - 02 sets (B) Outgoing (i) MCCB 40 to 63 Amps, TPN, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 06 Nos (ii) Digital multifunction meter with 3 Nos CTs of 20/5A - 01 Set (iii) Bus bar 4 strips Aluminium of capacity 100 Amps, TPN of suitable size - 01 Set (Note: (i) Panel shall be of factory made and CPRI approved (ii) External terminals with tinned copper has to be provided for trimming the incoming and outgoing cables with suitable lugs of MCCB/MCB (if required) (iii) Necessary excavation and earth work for foundation shall deemed to be included in the unit quoted rate)
Supply, Install, Commissioning and testing LT cubical type panel board, CPRI approved factory made, outdoor type, suitable for 415 Volts, 3 Phase, 4 Wire system, 50 Hz supply, made out of 3.15mm thick CRCA sheet, Dust and vermin proof, weather proof (IP54), powder coated with front and rear openable door shutter with seperate hinge door with locking arragnement, totally enclosed type including PCC 1:2:4, Type B-1 foundation of suitable size, and internal wiring with copper conductor cable complete all as specified and directed comprising with the following items: (A) Incomming: (i) MCCB 100 Amps, 4 pole, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 01 Nos (ii) Phase indicator for (RYB) - 02 sets (iii) On load changeover switch 63 Amps - 01 No (B) Outgoing (i) MCCB 40 to 63 Amps, TPN, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 03 Nos (ii) Digital multifunction meter with 3 Nos CTs of 20/5A - 01 Set (iii) Bus bar 4 strips Aluminium of capacity 100 Amps, TPN of suitable size - 01 Set (Note: (i) Panel shall be of factory made and CPRI approved (ii) External terminals with tinned copper has to be provided for trimming the incoming and outgoing cables with suitable lugs of MCCB/MCB (if required) (iii) Necessary excavation and earth work for foundation shall deemed to be included in the unit quoted rate)
Supply, Install, Commissioning and testing LT cubical type panel board, CPRI approved factory made, outdoor type, suitable for 415 Volts, 3 Phase, 4 Wire system, 50 Hz supply, made out of 3.15mm thick CRCA sheet, Dust and vermin proof, weather proof (IP54), powder coated with front and rear openable door shutter with seperate hinge door with locking arragnement, totally enclosed type including PCC 1:2:4, Type B-1 foundation of suitable size, and internal wiring with copper conductor cable complete all as specified and directed comprising with the following items: (A) Incomming: (i) MCCB 63 Amps, 4 pole, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 01 Nos (ii) Phase indicator for (RYB) - 02 sets (B) Outgoing (i) MCB, SPN, 6-32 Amp, 10 KA - 12 Nos (ii) Digital multifunction meter with 3 Nos CTs of 20/5A - 01 Set (iii) Bus bar 4 strips aluminium of capacity 100 Amps, TPN of suitable size - 01 Set (Note: (i) Panel shall be of factory made and CPRI approved (ii) External terminals with tinned copper has to be provided for trimming the incoming and outgoing cables with suitable lugs of MCCB/MCB (if required) (iii) Necessary excavation and earth work for foundation shall deemed to be included in the unit quoted rate)
Supply, Install, Commissioning and testing LT cubical type panel board, CPRI approved factory made, outdoor type, suitable for 415 Volts, 3 Phase, 4 Wire system, 50 Hz supply, made out of 3.15mm thick CRCA sheet, Dust and vermin proof, weather proof (IP54), powder coated with front and rear openable door shutter with seperate hinge door with locking arragnement, totally enclosed type including PCC 1:2:4, Type B-1 foundation of suitable size, and internal wiring with copper conductor cable complete all as specified and directed comprising with the following items: (A) Incomming: (i) MCCB 63 Amps, 4 pole, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 01 Nos (ii) Phase indicator for (RYB) - 02 sets (B) Outgoing (i) MCCB 40 to 63 Amps, 3 pole, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 02 Nos (ii) MCB, SPN, 32 Amp, 10 KA - 06 Nos (iii) Digital multifunction meter with 3 Nos CTs of 20/5A - 01 Set (iv) Bus bar 4 strips aluminium of capacity 100 Amps, TPN of suitable size - 01 Set (Note: (i) Panel shall be of factory made and CPRI approved (ii) External terminals with tinned copper has to be provided for trimming the incoming and outgoing cables with suitable lugs of MCCB/MCB (if required) (iii) Necessary excavation and earth work for foundation shall deemed to be included in the unit quoted rate)
Supply, Install, Commissioning and testing LT cubical type panel board, CPRI approved factory made, outdoor type, suitable for 415 Volts, 3 Phase, 4 Wire system, 50 Hz supply, made out of 3.15mm thick CRCA sheet, Dust and vermin proof, weather proof (IP54), powder coated with front and rear openable door shutter with seperate hinge door with locking arragnement, totally enclosed type including PCC 1:2:4, Type B-1 foundation of suitable size, and internal wiring with copper conductor cable complete all as specified and directed comprising with the following items: (A) Incomming: (i) MCCB 63 Amps, 4 pole, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 01 No (ii) Phase indicator for (RYB) - 02 sets (B) Outgoing (i) MCCB 63 Amps, 3 pole, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 12 Nos (ii) Digital multifunction meter with 3 Nos CTs of 20/5A - 01 Set (iii) Bus bar 4 strips aluminium of capacity 100 Amps, TPN of suitable size - 01 Set (Note: (i) Panel shall be of factory made and CPRI approved (ii) External terminals with tinned copper has to be provided for trimming the incoming and outgoing cables with suitable lugs of MCCB/MCB (if required) (iii) Necessary excavation and earth work for foundation shall deemed to be included in the unit quoted rate)
Supply, Install, Commissioning and testing LT cubical type panel board, CPRI approved factory made, outdoor type, suitable for 415 Volts, 3 Phase, 4 Wire system, 50 Hz supply, made out of 3.15mm thick CRCA sheet, Dust and vermin proof, weather proof (IP54), powder coated with front and rear openable door shutter with seperate hinge door with locking arragnement, totally enclosed type including PCC 1:2:4, Type B-1 foundation of suitable size, and internal wiring with copper conductor cable complete all as specified and directed comprising with the following items: (A) Incomming: (i) MCCB 250 Amps, 4 pole, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 01 No (ii) Phase indicator for (RYB) - 02 sets (B) Outgoing (i) MCCB 63 Amps, 3 pole, 25 KA, 415 Volts, adjustable tharmel magnetic release: - 10 Nos (ii) Digital multifunction meter with 3 Nos CTs of 20/5A - 01 Set (iii) Bus bar 4 strips aluminium of capacity 400 Amps, TPN of suitable size - 01 Set (Note: (i) Panel shall be of factory made and CPRI approved (ii) External terminals with tinned copper has to be provided for trimming the incoming and outgoing cables with suitable lugs of MCCB/MCB (if required) (iii) Necessary excavation and earth work for foundation shall deemed to be included in the unit quoted rate)
ms singh construction
M/S MANASEE
M/s PRABIR ENTERPRISE
SHRI MANOJ KONWAR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .