REPAIR MAINT TO ROOF SEEPAGE LEAKAGE SUNKEN PORTION TREATMENT FALSE CEILING AND CONNECTED ITEMS IN MD OTM ACCN AT PANAJI ALTINHO MH AREA ETC UNDER GE PANAJI

Amount

Dismantling Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings all as specified and as directed.

Dismantling of Manglore tiles in roof covering all as specified and as directed.

Dismantling battens for tiles complete all as specified and as directed.

Material & labour 2nd class Hardwood Clean sawn battens at 15cm centres exc 5 & n. exc 15 sq. cm complete all as specified and as directed.

Material & labour Mangalore pattern Roof tiles, interlocking at side joints, laid dry complete all as specified and as directed.

Fixing only Mangalore pattern Roof tiles, interlocking at side joints, laid dry complete all as specified and as directed.

Material & labour for Ridge or hip tiles to suit Mangalore pattern of Roofing tiles, bedded cement mortar 1:6 laid dry complete all as specified and as directed.

Fixing for Ridge or hip tiles to suit Mangalore pattern of Roofing tiles, bedded and cement mortar 1:6 laid dry complete all as specified and as directed.

Dismantling timber scantlings 40 sq. cm and over in section, unrramed work in any position complete all as specified and as directed.

Supply and fix 0.50mm thick, pre- painted corrugated/ ‘Z’ profile galvalume roofing sheets as in roofing (in any location and any type) having high strength steel with minimum 550 Mpa strength hot dip coated with aluminium zinc alloy (55% aluminium and 45% zinc) pre-painted with primer coat of 5 micron and coated with silicon modified polyester coating of 20 micron and alkalyed coating of 10micron on reverse side. End rib, side over lap and overlap of sheets shall be designed for anti-capillary activities to avoid any seepage of water through lateral overlap as per manufacturer’s instructions, including fixing with self-drilling and self-tapping screws 0.5mm dia full threaded, all Kautex coated and fitted with EPDM washers in stainless steel. The screws shall be coated with anti-corrosive substance to ensure longer life and shall be fixed using drill guns for lead proof installation. Screws shall be of “HILTI” make complete all as specified and directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain sheet steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and as directed.

Supply & Fixing Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle, cleat or other connecting plates (Fe-410-W(Gde-E-250) quality-A complete all as specified and directed.

Material & Labour for Preparation of New steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified complete all as specified and directed.

Framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc10 kg each brackets, conforming to Fe.290, Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed.

Supply and fixing PVC (SWR) pipes 150mm in semicircular shape for rain water pipe all as specified and as directed.

Demolition of existing water proofing treatment any type from top surface of roof slab and removing the material obtained to low lying area all as directed and as directed.

Material & labour for water proofing treatment using 4mm thick APP modified membrane consisting of five layer membrane with features as spcified, weighing not less than 4kg per Sqm laid over a coat of cold applied bituminous primer @ 0.4 litres per sqm on surface to provide a layer of APP membrane by torching application including sealing the over lap while torching with 150mm on ;length side and 100mm wide side as per manufacturer instructions incl joints and change in direction be curved with cement mortar 1:3 mixed with SBR latex @ 200 ml/ bag of cement cured well before laying of membrane and provide a finishing coat with solar reflective bituminous aluminium paint @ 0.1 kg per Sqm as all as specified and directed.

Material & labour for rendering 10 mm thick in CM 1:3 on fair faces of brick or concrete surface finished even and smooth without using extra cement and using WPC @ 3% by weight of cement. Note:- Water proofing compound will be measured and paid separately all as specified and directed.

Supply only integral waterproofing compound all as specified and as directed.

Disconnecting existing water tanks (exc 250 ltrs but not exc 500Ltrs), setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) all as specified and directed.

Dismantling water tanks and removing to store capacity exc 500 Ltr n.exc 1000 Ltr all as specified and directed.

Supply and fixing 500 Ltr capacity Rotational moulded polythene water storage tanks(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified and directed.

Supply and fixing 1000 Ltr capacity Rotational moulded polythene water storage tanks(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store, 15mm bore complete all as specified and as directed.

Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store, 20mm bore complete all as specified and directed.

Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store 25mm bore complete all as specified and directed.

Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

All as per ser item No 28 above but 25mm bore.

Supply and fixing of CPVC 20mm Brass Elbow (3/4 x 1/2)

Supply and fixing of CPVC 20mm Brass Tee

Supply and fixing of CPVC 20mm Male Brass Threaded Adaptor (MTA/ MBTA)

Supply and fixing of CPVC 20mm Female Brass Threaded Adaptor (FTA/ FBTA)

Supply and fixing of CPVC 25mm Tank Adaptor

Supply and fixing of CPVC 25mm Ball valve

Taking down or up cast iron water mains 80 mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed.

Taking down or up cast iron water mains 100 mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed.

Supply and fixing 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fixing 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix 75 mm PVC(SWR) Bend complete all as specified and as directed.

Supply and fix 110mm PVC (SWR) Bend complete all as specified and as directed.

Supply and fixing 75 mm PVC (SWR) branch piece, (single Y) equal or unequal provided with access door complete all as specified and as directed.

Supply and fixing 75 mm PVC (SWR) branch piece, (double Y) equal or unequal provided with access door complete all as specified and as directed.

Supply and fixing 110 mm PVC (SWR) branch piece, (single T) equal or unequal provided with access door complete all as specified and as directed.

Supply and fixing 110 mm PVC (SWR) branch piece, (double Y) equal or unequal provided with access door complete all as specified and as directed.

Supply and fix PVC (SWR) vent cowl 75mm Dia complete all as specified and as directed.

Supply and fix PVC (SWR) vent cowl 110mm Dia complete all as specified and as directed.

Supply and fixing 75 mm PVC (SWR) bends any radius provided with access door complete all as specified and as directed.

Supply and fixing 110 mm PVC (SWR) bends any radius provided with access door complete all as specified and as directed.

Taking down cement plaster on brick or concrete surface including raking out joints, hacking for key, scrubbing down with water, etc. complete complete all as specified and as directed.

Material & labour rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:4 without using extra cement with using 3% water proofing compound complete all as specified and as directed.

Material & labour rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:6 without using extra cement complete all as specified and as directed.

Material & labour plastering 10 mm thick on brick or concrete surface in CM (1:3) on ceiling to be finished even & smooth without using extra cement complete all as specified and as directed.

Material & labour for Preparation of newly plastered surface of wall with putty and applying two coat of oil emulsion distemper walls complete all as specified and as directed.

Material & labour for preparation of old plastered surface of wall and applying one coat of oil bound distemper complete all as specified and directed.

Material & labour for preparing of new plastered surface and applying three coats of white wash on ceiling complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance, exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over two coat of damp proof white new surface complete all as specified and directed.

Taking down Chowkats or frames with shutters (w/o taking of shutters from the frame) exc. 1.5 SM but n.exc. 4 SM & removing from site complete all as specified and directed.

Supply and fixing 2nd Class H.W. plain solid straight chowkats & frames wrought, framed, rebated on the solid rounded or chamfered put together with glue, pinned at joints complete all as specified and directed.

Supply and fixing glazed, guaged skeleton shutter 35mm thick 2nd class H/W factory made divided in to squares with plain, chamfered of rounded, mitred and reveated sash bars any number prepared to receive glass/gaused etc.edges of framming plain,chamfered or rounded fitted with cut and mitred beads for securing glass/guaged etc.

Supply and fixing 35 mm thick 2nd class H/W Factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fix solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube all as per specification & drg.

Supply and fix factory made solid panel PVC door shutter 30mm thick (styles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PCV Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitten in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement, complete all as specified and shown in drawing.

Material & labour Preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer complete all as specified and directed.

Supply and fixing Butt hinges, medium weight cold rolled mild steel and fixed in repairs 100mm long complete all as specified and directed.

Supply and fixing Aluminium anodised, barrel tower bolts of extruded section and fixed in repair 150 mm long complete all as specified and directed.

Supply and fixing Aluminium handles cast type anodised 150mm long fixed in repair complete all as specified and directed.

Supply and fixing Mortice lock 2 lever brass, vertical type, size 100 mm all as specified.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repair 300 mm long complete all as specified and directed.

Supply and fixing 300mm ordinary rat rail rod pattern spring including roller plate complete fixing mild steel spring complete all as specified and directed.

Supply and fixing Aluminium alloy wire cloth 0.45 mm nominal dia.of wire and average width of aperture 1.40 mm and and fixed in repairs with aluminium wire staples/wooden beads complete all as specified and directed.

Supply and fixing in repair floor door stopper aluminium body with overall length 140mm complete all as specified and directed.

Dismantling of ceiling boards any thickness including cover fillets.

Supply and fix anodized aluminium snap grid frame work for false ceiling of grid size 605mm x 605mm with size of main tee 35mm x 25mm x 1.5mm and cross tee 25mm x 25mm x 1.5mm and supporting angle at the end all alonge the wall 40mm x 25mm x 2mm, hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long with and including 6mm thick designer non-asbestos fibre cement building boards fixed or laid/ inserted to aluminium frame work with screws complete all as specified and directed.

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately)Extra over for any sunk or raised moulding Anodised aluminium snap grid frame work for false ceiling Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long with Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed in repair complete all as specified all as specified.

Demolition of cement concrete in below or above ground floor and paving exc 15 cm thk (unreinforced).

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises .

Material & labour for cement concrete type E2 1:5:10 (40 mm graded aggregate) in sunken floor all as specifed and directed.

Material & labour PCC 1:3:6 type C-2, 75mm thick as in plinth protection, Surface finished fair and smooth without using extra cement all as specified and as directed.

Material & labour cement concrete type C- 2, 1:3:6 (40mm graded aggregate) 75mm thick as in sub base all as specified and as directed.

Material & labour cement concrete type B1 1:2:4 using 20mm graded stone aggregate 25 mm thick as in flooring etc all as specified and as directed.

Material & labour coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm th screed bed in CM 1:6 all as specified and as directed.

Material & labour glazed ceramic coloured designer pattern tiles 450mmx 300mmx7mm thick on vertical surface such as skirt, Dado etc set and jointed in white colour cement including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 all as specified and as directed.

Material & labour for Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM 1:6 all as specified and as directed.

Supply & Fix in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections incl 110mm PVC (SWR) WC connector with lip ring etc complete all as specified and as directed.

Supply & Fix in repair vitreous china wash down water closet pan (pedestal pattern ), white connecting to trap and to flushing pipe front or back inlet etc complete all as specified and directed.

Supply and fixing Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fix in repairs all as specified and as directed.

Supply and fixing in repairs PVC valveless, syphonic action type flush tank white, 10 litre capacity with inlet ball valve, float & handle incl brackets complete high level, flush pipes of PVC 32 mm dia, rubber cones, PVC connection 15 mm size with PTMT nut of length 600 mm etc complete all as directed.

Supply and fixing in repairs vitreous china wash down water closet (pedastal pattern) White colour of 'P' or 'S' trap combine pan with flush tank and all accessories fittings all as specified. Make : CERA, CLAIR DELUXE, 2025, 2115, 2315, 2205/ MAKE - JAGUAR (FNS-WHT-0320) Couple Closet (760x360x635), Trap distance S-220mm / Make - HINDWARE, ESTALLA, Cat part No- 92083, size -70x37x62cm, 'S' trap distance - 30cm

Supply and fixing in repairs central hole Basin Mixer for WHB with Round Spout with popup waste system with 450mm Long Braided Hoses, 20mm Cartridge Size suitable for 15mm bore GI pipe. Make : Jaguar (Code FLR-5167NB/5169NB) or equivalent make approved by GE.

Supply and fixing in repairs wall mixer wall mount brass silver polished 3-in-1 all as spd and directed by Engr-in-Charge. Make : Jaguar (Code No SHFLR5281N) or equivalent make approved by GE.

Supply and fixing in repairs angular stop Cock with wall flange suitable for 15mm bore GI pipe. Make : CERA (Code CQ-608/CC-108) or equivalent make approved by GE.

Supply and fixing in repairs 2 way Angular stop Cock with wall flange suitable for 15mm bore GI pipe. Make : CERA (Code CQ-605/CC-105) or equivalent make approved by GE.

Supply and fixing in repairs paper holder with Flap Recessed Type (Stainless steel), all as spd and directed by Engr-in-Charge. Make : Jaguar (Code No AHS-1553) or equivalent make approved by GE.

Supply and fixing in repairs corner Glass shelf with bracket, all as specified and directed by Engr-in-Charge. Make : Jaguar (Code No CAN-1173) or equivalent make approved by GE.

Supply and fixing in repairs glass shelf with bracket, all as specified and directed by Engr-in-Charge. Make : Jaguar (Code No CAN-1173) or equivalent make approved by GE.

Supply and fixing in repairs Hand Shower (Health faucet) (ABS Body) with 1 metre long easy Flex Tube in Chrome Finish and Wall Hook, all as spd and directed by Engr-in-Charge. Make : Jaguar (Code No ALD-CHR-585) or equivalent make approved by GE.

Supply and fixing in repairs Bib Cock with flange suitable for 15 mm bore GI pipe, all as specified and directed by Engr-in-Charge. Make : Jaguar (Code CQN-037KN) or equivalent make approved by GE.

Supply and fixing in repairs Soap Dish Holder, all as specified and directed by Engr-in-Charge. Make : Jaguar (Code No ACN-1131N) or equivalent make approved by GE.

Supply and fixing in repairs Vitreous China Table Top Basin Size (mm) 170x420x380, all as specified. Make : Jaguar (Code No CWS-WHT-WB09)/Make-HINDWARE, Crystal : 10057 (190535), size : 42cm dia/ Make - CERA : Columbia , 7753A, 420mm dia or equivalent make approved by GE.

Supply and fixing aesthetically designed bathroom mirror with Hi-quality 4mm glass dual hanging option durable and strong, with overall size 600 x 600 mm and mirror size 600 x 450, complete all as specified and directed. Make :- Prayag cat Part No 553 or equivalent make of approved by GE.

Supply and fixing in repairs PVC (SWR) Gully trap 125/110 mm setting & jointing with solvent cement.

Supply and fixing in repairs PVC (SWR) floor trap 75 mm dia, plain with CP grating including jointing with solvent cement.

industrial suppliers

ECOBUILD