MAINTENANCE OF ELECTRICAL INSTALLATION IN GOVT. RESIDENTIAL BUILDING AT CHANDIGARH. (REWINDING/ REPAIR OF CEILING FANS AND EXHAUST FANS ETC. IN VARIOUS RESIDENTIAL BUILDING IN SECTOR-33,34, 44 AND 45, CHANDIGARH UNDER THE JURISDICTION OF SDE, E-3, CH

Full stator rewinding of ceiling fan (condenser type) of 1400 mm sweep with new copper winding wires including cleaning and insulating the stator slots, sleeving, soldering, wrapping of cotton tape, reassembling, varnishing and testing etc. complete.

Full stator rewinding of ceiling fan (condenser type) of 1200 mm sweep with new copper winding wires including cleaning and insulating the stator slots, sleeving, soldering, wrapping of cotton tape, reassembling, varnishing and testing etc. complete.

Providing split pin, check nuts, hanger nuts and bolts etc. including hanger if required to be replaced after removing the old. The rates includes re-erection of ceiling fan after repair and other petty material such a screws pin, bolts nuts etc. as per requirement at site.

Fabrication of shaft after removing the shaft from the stator body safely and then labour works for welding and turning of the same to give the original shape from workshop and other petty material required. to complete the job to the entire satisfaction of Engineer-in-charge.

Replacement of ball bearing of ceiling fan including greasing, re-assembling and testing etc.

Supply and erection of fan condenser (paper condenser) for ceiling fan of following rating: The condenser is to be installed in existing ceiling fan after dismantling the defective condenser including connection and testing etc. The fan condenser should be of Epcos make.

Condenser 2.5 µ fd.

Condenser 3.15 µ fd.

Full stator rewinding of Exhaust fan (condenser type) of 900/ 1400 RPM with new copper winding wires including cleaning and insulating the stator slots, sleeving soldering wrapping of cotton tape, varnishing re-assembling and testing etc. complete.

12" Sweep

15" Sweep

18" Sweep

Supply and erection of rubber reel after dismantling the defective real including connection and testing etc.

S/E of ceiling fan/ exhaust fan aluminum Blades set of matching colour of existing ceiling fan/exhaust fan. The job includes the cost of fixing of new blades at site after dismantling the existing blades.