Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.0 LAccepted-AOC HIG 40 TYPE B DEV PRAYAGAM ADA COLONY JHALWA PRAYAGRAJ U P 211015 | PRAYAGRAJ | PRAYAGRAJ | UTTAR PRADESH | 211015 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹44.0 L+₹1.7 L (4.12%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹45.0 L+₹2.7 L (6.39%)Rejected-Finance 41B 1H JAYANTIPUR PREETAM NAGAR ALLAHABAD | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹45.3 L+₹3.0 L (6.98%)Rejected-Finance BAKRABAD BAMRAULI ALLAHABAD U P | ALLAHABAD | U P | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹46.4 L+₹4.1 L (9.67%)Rejected-Finance 83 5M 1 SHIV GANGA PURAM YADAVPUR ROAD UMARPUR NEEWAN PRAYAGRAJ 211011 | PRAYAGRAJ | UTTAR PRADESH | 211011 | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹36.8 L
EMD Value
₹73,600
Closing Date
22 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Bamrauli
GE (AF) Bamrauli
IMPROVEMENT TO ROOF AND LINTELS IN CERTAIN OMQs IN NORTH CAMP AND OTHER SANCTION WORKS UNDER GE (AF) BAMRAULI
2023_MES_591596_1
8778/E8
Open Tender
Civil Works
Works
180 days
GE (AF) Bamrauli
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (AF) Bamrauli
₹73,600
3 Jul 2023
27 Apr 2023
30 May 2023
27 Apr 2023
22 May 2023
15 May 2023
Amount
Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, all as specified and directed.
M&L for rendering 15mm thick on faces of brick work or concrete surfaces finished even and smooth without using extra cement in CM 1:4, all as specified and directed.
M&L for rendering 15mm thick in CM 1:6 on faces of brick work or concrete surfaces finished even and fair, all as specified and directed.
M&L for rendering 5 mm thick on ceiling surfaces of brick work or concrete surfaces finished even and smooth without using extra cement in CM 1:3 as in ceiling, all as specified and directed.
M&L for wall care putty Birla/ JK white 1.50mm thick (to achieve smooth surface) for new plaster surface complete.
M&L for preparation of new wall surfaces and applying two coat of cement base paint complete.
M&L for preparation of new wall surfaces & applying three coat white wash on new ceiling surfaces complete. all as specified and directed.
Preparation of old distemper surface by washing, rubbing down and stopping of distemper and painted surface but one coat of Oil bound distemper on ceiling surface complete all as specified.
Complete removal of existing finishes on wall and applying two coats of oil bound distemper over a coat of primer including chalk whitning complete all as specified and directed.
M&L for preparation of old wall surfaces and applying one coat of cement base paint complete.
Demollition of Cement concrete (reinforced) in roof, floors( other than ground floor), beams staircases, landing, chajjas and similar suspended works all as specified and as directed.
S & F formwork to chullah hoods, chajjas and similar works including edges all as specified and directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for reinforcement cement concrete type B-1 (1:2:4) 20mm graded stone aggregate for chajjas all as specified and directed.
Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames). all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each. all as specified and directed.
M&L for MS work as in as in grills / Guards bars fillets for securing wire mesh and similar articles and hold fost, including demolition complete all as specified and directed.
S&F Aluminium (powder coated) frame for sliding windows, side hung windows and ventilators with necessary joining cleats, fastner etc to fix in existing opening complete. Notes : (i) Thickness of powder coating (epoxy polyster) shall not be less than 50 micron. (ii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. (iii) Gaps between frame and masonary/cill/lintel to be filled with silicon gel for water tightness. (iv) Rates quoted includes making good of jambs, soffits and cills etc. (v) Aluminium section shall be as per drg No. CE/ALD/TD-194 sheet No. 1/2 & 2/2. However size of frame shall be per actual site requirement.
S&F Aluminium (powder coated) sliding glazed shutter in three track one jallie and two glass of suitable size with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and locking arrangement at both end all as specified and as shown and drawing. Notes : (i) Glass filling in panels to windows shall be measured and paid for separately under respective item of this schedule as supply only (ii) Thickness of powder (epoxy polyster) coating shall not be less than 50 micron (iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. (iv) Frame shall be measured under respective item of this schedule. (v) Aluminium section shall be as per drg No. CE/ALD/TD-194 sheet No. 1/2 & 2/2
S&F Aluminium (powder coated) window and ventilator shutters, side hung type, without sash bars, aluminium section weighing not less than 0.55 Kg/Metre including clips, rubber packing aluminium snap beading, screws, fittings (each shutters) such as peg stays 150 mm long, hinge type B-21 100 mm long (2 Nos), 150mm long D type handle (one number) and tower bolt 150mm long (one number) (Notes : (i) Glass panels to windows/ventilator shall be measured and paid for separately under respective item of this schedule as supply only. (ii) Thickness of powder (polyster) coating shall not be less than 50 micron. (iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. (iv) Frame shall be measured and paid for separately under respective item of this schedule. (v) Quoted rate shall deem to included cost of alumiumum powder coated builder hard ware.
S&F Stainless steel (Grade S-304) wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
Supply only 5.0 mm thick tint glass/pin head type for aluminium ventilators / window etc. complete, all as specified and directed.
S&F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors. complete all as specified and directed.
All as per item No.24 as above but 75mm bore. complete all as specified and directed.
Demolition of brickwork built in any type of mortar, complete all as specified and directed.
M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.
Demolition of concrete of any description and in any position not otherwise specifically provided for cement concrete reinforced.
M&L for 75mm thick cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection finished surface even and smooth without using extra cement complete all as specified and directed.
Dismantling PVC water tank and removing from the site capacity in ltrs exc500 & n.exc 1000 ltrs
S&F rotational moulded polyethylene water storage tanks white colour 500 ltrs (cylindrical vertical with closed top) rotetional threded tank cover hoisted and fixed in position.
M&L for rotational moulded polythelene water storage tank 1000 ltrs capacity double layer cylindrical vertical with closed top hoisted & fixed in position including all as spd & directed.
Disconnecting existing tanks exc 250 litre but n. Exc 500 litres, setting aside (or lowering if required) for repairs, cleaning, etc. And hoisting if required reconnecting and re-fixing in position.
Disconnecting existing tanks exc 500 litre but n. Exc 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. And hoisting if required reconnecting and re-fixing in position.
S&F in repair gun-metal stop cock 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete
S&F Ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe 20mm bore or brass ferrule and fixed in repairs.
M&L for preparation and writing letters or figures(Block, Roman, Italic or Indian) n exc 30 cm height on palster/concrete wall/path over coat of ACE as matching with existing pattern complete all as specified and directed.
Demolition of plain cement concrete in any position including Tar felt or HP tiles in cement mortar bedding etc complete all as specified and directed.
M&L for 25mm thick (average) PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in roof padding, benching existing roof slab laid to slope as per existing or as directed including finished surface even & fair complete all as specified and directed.
M&L for treatment of roof with reinforced elastomeric liquid waterproofing membrane of 100-micron thickness in four layer having SRI of 130, tested as per ASTM E 1980 (with Solar Reflectance and Thermal emittance tested as per ASTM C 1549 and ASTM C 1371, respectively). The coating should have water absorption less than 1% as per IS: 101 (P-7/Sec-1) 1989, with the ability to resist heat upto 120°C as per IS: 101 (P-7/Sec-3) 1990 having VOC less than 1g/ltr as per ASTM D 3960 and should have excellent resistance to transmission of ponded water up to 3.5 bars of pressure for 7-days. It should also be resistant to Ammonia solution, Sodium nitrate, Sodium hydroxide, along with water and soap solution as per IS: 101 (P-7/Sec-2)1990. The waterproofing membrane will be laminated with 25–40-micron thick transparent Nano modified composite crosslinking polymeric coating with a minimum of 40% solid content as per IS:101 (P-8/Sec6)1993 and also should pass Impact test as per IS:101 (P-5/Sec-3) 1988 along with having dust and water repellent & anti-graffiti property passing Scratch hardness test of 500g as per IS: 101 (P-5/Sec-2) 1988. It should also pass Cross Cut Adhesion test as per IS: 101 (P-5/Sec-2) 1988. The Polymeric coating should have a self-cleaning and easy-to-clean property with excellent weather stability and DPR (Dirt pickup ratio). Surface preparation includes pressure wash cleaning to remove all dust, fungus, etc, with pressure washer after repairing the existing roof having old bitumen membrane by filling cracks, potholes, holes with waterproofing compound having compressive strength as per IS-4031 part-6-1988 & permeability of water as per IS2645-2003. The work will be done under the supervision of the Engineer-in-charge by Graco airless machine & OEM should be an IGBC (Indian Green Building Council) member & GRIHA Council Certified. The coating thickness and the methodology of application shall strictly be as per the manufacturer's specificationsand as approved by the Engineer-in-charge. Make : Pidilite, Sika Foscroc, Dr Fixit.
Taking down up or down steel tubing 15mm bore and connection, incldg removal to store complete all as specified and directed.
Taking down up or down steel tubing 20mm bore and connection, incldg removal to store complete all as specified and directed.
S&F medium grade galvanished pipe with all fittings & fixed to wall and ceiling lain in floors, bore of pipe 15mm complete as spd and directed.
S&F medium grade galvanished pipe with all fittings & fixed to wall and ceiling lain in floors, bore of pipe 20mm complete as spd and directed.
S & F in repair 18mm thick celuka PVC sheet minimum 600 Kg/Cum density grade 1 quality of both side plain white colour rigidlam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet sides top and bottom and shelves inside the cabinet complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Modular kitchen accessories i.e. basket, cutlery baskets, fittings, handles, hinges, will be measured and paid for seperately as supply only under respective of this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.
S & F in repair 18mm thick celuka PVC sheet minimum 600 Kg/Cum density grade 1 quality one side pre-laminated and other side plain white colour to make kitchen cabinet/drawer shutters fixed with screws, solvent cement/adhesive as per manufacturer instructions complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Handles, hinges, will be measured and paid for seperately as supply only under respective of this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Colour and design of prelaminated portionshall be as approved by GE. (iv) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.
Supply only autoclosing hydrolic (soft closing) chrome finish stainless steel frog hinge openable at 110 degree complete.
Supply only 100mm long stainless steel (grade S-304) handle fancy type polished bright chrome finish complete.
Supply only 200mm long stainless steel (grade S-304) handle fancy type polished bright chrome finish complete.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified as directed.
Removing excavated soil n.exc 50m and depositing where directed at a level n.exc1.5m above the starting point etc complete all as specified as directed.
M&L for PCC 1:4:8 type D-2 (40mm graded aggregate) Cement concrete in foundations filling and mass concrete etc complete all as specified as directed.
M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all specified as directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Confirming to Fe-410- W(GdeE-250) quality-B etc complete all as specified and directed.
M & L applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete.
M & L formwork to sides and soffites of floors or roof beam, beam haunching, girders, bressummers,lintels,cantilevers,shelves including supports,overhangs,etc also splays between floors and beams etc for fair finish.
M&L for RCC M25 using 20 mm graded stone aggregate as in beams, cantilever, bressummers, lintels over 1.50 m spanand similar work etc complete all as specified and directed
M&L preparation of new wall surfaces of wall and applying two coat oil bound distemper over a coat of alkali resistant cement primer complete all as specified and directed.
S&F in repair vitreous china squating pan "Orrisa" patern size 580x440mm white with 'P' or 'S' trap front or back inlet with integral foot rest (excluding flushing cistern and flush pipe), squating pan including connection to trap and flushing pipe, anit syphonic pipe etc complete incl making good to floor complete all as specified and directed.
S&F Factory made internal PVC Door frame of size 100X45mm with a wall thickness of 5mm made out of extruded 5mm prelam PVC foam sheet of density 600kg/cbm manufactured by an ISO-9001-2008 certified compnay mitre cut at two corner and jointed with 4 Nos of 150mm long brackets of 15x15mm MS Square tube or fusion heat welding proces the two vertical door frames to be reinforced with 40x20mm MS tube of 19 gauge through out the framr. the door frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC Fasteners a minimum of 4 nos of screws to be provided foe each vertical member & minimum 2nos for horizontal member etc complete all as per manufactures Sfd.
S&F 30mm thick factory made solid panel PVC door shutter consisting of frame made out of M s tube of 19 gauge thickness and size 40x20mm for stiles as well as top lock & bottom rails MS frame shall have a cost of matel primer of approved make & manufacture MS frame shall be covered with heat moulded prelam'C' channel made from5mm (#.25) thick PVC sheet of density 600kg/cbm manufacture by an ISO-9001-2008 certified compnay of size 30mm thick & 110mm width forming stiles in which 100mm should be flat & 5mm should be taper and 5mm (#0.25) thick 135mm wide PVC sheet for top rail and bottom rail in which 125mm should be flat & 5mm taper on either side an additional 5mm thick PVC solvent cement adhesive peneling of 10mm prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with 30mm wide x 5mm (#0.25) 30mm thick Pvc sheet beading either side & additional 30mm wide PVC beading as gap insert below top & bottom rail joined together using solvent cement adhesive 15mm thick 5mm0.25)x 3) 20mm wide croner PVC sheet as gap insert for top and bottom rail door to be fitted with frame with 3 nos ms powder coated butt hinges of size 100mm 25mm &n 50mm longer steel screws drilled suitable to pass through both the wall of the MS tube other hardware's of door should be fixed with 25mm 8mm size steel screws etc. complete as per manufactures Sfd.& drawing including iron mongery all fiting complete all as sfd and directed.
S&F 100mm Aluminum hinges, complete type B-21
S & F 200 mm long aluminium anodised barrel tower bolts ISI marked of extruded section and fixed
S & F 150 mm size aluminium handles 'D' Type ISI brand cast type, anodised complete.
S & F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.
Chromium plated stainless steel (Grade S-304) (heavy) grating minimum 3 mm thick of size 125mm dia for trap
S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S&F in repairs vitreous china pedestal pan(EWC) and trap incl connection to drain or outgoing pipe & to flush pipe, anti syphonage pipe etc complete all as specified and directed.
S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S&F in repair vitreous china, wash hand basin white flat back size 550x400mm white complete waste, chain and plug and procelain stopper including bracket complete all as spd & directed
S&F in repairs PVC low level flushing cistern 10 ltr capacity complete with flush pipe of standard make: Commander/Hindustan incldg taking down old fitting fixture complete all as spd & directed.
S&F in repairs 15mm bib tap cast copper alloy (Chromium plated) fancy type with crutch or butter fly handle screwed down, screwed for iron pipe or brass firul and fixed complete all as spd & directed.
S&F in repair 15mm pillar taps, cast copper alloy with capstan head, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, scsrewed for iron pipe and fixed, complete all as spd & directed
S&F in repaire stop valve, 15 mm dia cast copper alloy, chromium plated with fancy type (angle type) screwed down, high pressure, screwed both ends for iron pipes.
S&F in repair PVC connection 15 mm size with PTMT nut of length 600 mm all as spd & directed
Hacking out old broken glass ( any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads
S&F 3mm thick sheet glass, ordinary , quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and directed
S&F in repair PVC waste pipe of 32mm dia suitable for WHB, kitchen sink complete all as specifed and directed
Dismantling, floor any type, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete.
M&L for glazed ceramic coloured tiles in vertical surfaces of size 450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including rendering 10 mm thick in cement mortor (1:4) on vertical surface as in backing coat all as specified and directed.
S&F 300x300 mmx7-8 mm thick ceramic non skid coloured tiles in floor, set & jointed in neat cement slurry and pointed in white or colured cement to match over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L for non-skid ceramic coloured tiles (400x400)mm, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors screed bed in cement mortar 1:6 and set and jointed in neat cement slurry and pointed in white or coloured cement.
Taking down soil, waste and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks, bends etc.
S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed
S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed
S & F of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below and above ground level) and removing the unserviceable materials to a distance not exceeding 100m all as specified and as directed.
M&L 75mm thick for PCC 1:3:6 type C-1 as in plinth protection , complete all as specified and directed
Supply and fixing in repair Exhaust fan 300/308 mm sweep(steel Body) , 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz including louvers and for fixing of Exhaust fan and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all aspecified and directed by Engineer-in-Charge
Supply and fixing in repair Exhaust fan 450 mm sweep(steel Body) , 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz including louvers and for fixing of Exhaust fan and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all aspecified and directed by Engineer-in-Charge
Supply and fix wall mounted fan 400mm sweep, 230 volts , 50 Hz 1420 RPM with 90 degree oscillation and having speed control by two pull cord system complete all as specified and directed.
Supply and fixing Pedestal fan 450mm sweep 1400 RPM, 100 watt , air delivery 115CMM double bearing one year warranty complete all as specified and directed by Engineer -in-Charge.
Supply and fixing ceiling fans Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, with remote, BEE 5 star rating for energy saving, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length incl taking down old & deposited to MES store yard complete all as spd & directed. Note : Cost of remote cell included in this item
Supply and fix electronic step type fan regulator 240 volt 50 Htz 120 watt (switch/sockets type in shape) modular type
S & F water heater storage type (Geyser) vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe suitable size with adopter for inlet and outlet water connection having adjustable knob for temperature control and inner tank should be glass line coated complete all as specified of capacity 25 ltrs having element 1.5/2 KW BEE star rating incl taking down old and deposted to MES store yard
Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.
HIMANSHU TRADERS
Bharat Trading Company
M/S KESRI WORKERS
chauhan construction
SUNNY ELECTRONICS CORPORTAION
M/S Garg Sons
Mohit Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .