Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹79.9 Laccepted-finance | ₹79.9 L | accepted-finance |
Tender Value
₹65.5 L
EMD Value
₹4.8 L
Closing Date
24 Apr 2026, 10:30 pmClosed
Bangalore Electricity Supply Company Limited
VINAY KUMAR
Strengthening of HT / LT Network by establishing 3 new feeders for evacuating of power and to convert existing HT/LT overhead lines to HT UG cable and LT AB Cable in Kanakapura Division of Ramanagara Circle, BESCOM
BESCOM/2025-26/EL/WORK_INDENT1065
BESCOM/2025-26/EL/WORK_INDENT1065
Open
Electrical
Two Tender Document System(Two Cover)
BESCOM Corporate Office Procurement section Bengaluru
4 documents required · 2 mandatory · 2 optional
The Bidder should have successfully completed as prime contractor similar works of HT UG Cable and LT AB Cable of value not less than 50% of the amount put to tender in the previous five financial years (2020-21, 2021-22, 2022-23, 2023-24 and 2024-25) to any DISCOMs/Distribution companies or any Government Electrical Utilities/PSUs.The value of the completed works shall be given a weight of 10% per year to bring them to the price level of the FY in which the tenders are invited i.e., FY 2025-26. Scanned copy of the DWA and satisfactory Work completion certificate duly indicating the amount, issued by an officer not below the rank of Executive Engineer or equivalent officer of the concerned DISCOMs/ Govt. Utilities/PSUs shall be uploaded.
The Bidder should have executed, the following minimum quantities of 80 % quantity of work in any DISCOMs/Distribution companies or any Government Electrical Utilities/PSUs on PTK/TTK in any One year during the previous 5 years (2020-21, 2021-22, 2022-23, 2023-24 and 2024-25)HT UG Cable - 5.8 Kms and Lt AB Cable - 16.38 Kms. Scanned copy of the DWA and Work Completion certificate issued by an officer not below the rank of Executive Engineer or equivalent officer of the concerned DISCOMs/ Govt. Utilities/PSUs shall be uploaded
The Bidder should be in existence as any of the following: a) Company incorporated in India under the Companies Act, 1956/2013 including any amendment thereto b) LLP incorporated in India under the Limited Liability Partnership (LLP) Act, 2008 including any amendment thereto c) Partnership Firm under Partnership Act, 1932 in India d) Sole Proprietorship Concern. Documents to be uploaded: a) i. Certificate of Incorporation issued by Registrar of Companies as per Companies Act 1956/2013 along with Memorandum of Association and Articles of Association of the Company.ii. Declaration from Directors of the Company in MBP-1 Form stating that they are not disqualified to be a Director of the Company along with the list of Companies in which they are Directors as on the date of inviting tender (s). b) i. Certification of Incorporation issued by Registrar of Companies as per LLP Act 2008. ii. Limited Liability Partnership Agreement of LLP. c) i. Partnership Deed, GST Registration certificate. ii. Shops & Establishment Registration certificate, as applicable. d) PAN/GST Registration certificate.
The Bidder should possess a valid Super Grade/Class-1 Electrical Contractors License issued by Electrical Inspectorate should be In force as on the date of Bid Submission. Scanned copy of Valid Super Grade/Class-1 Electrical Contractors License shall be uploaded.
Bid capacity: Bidder who meets the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity is equal to (AxNx1.5-B) Where, A is equal to Maximum value of works executed in any one year during the last five years (updated to FY in which tenders are invited), taking into account the completed as well as works in progress. N is equal to Number of years prescribed for completion of the works for which tenders are invited. B is equal to Value, at FY in which tenders are invited price level, of existing commitments and on-going works to be completed during the next 12 months. Scanned copy of the statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works as per the format prescribed in the Techno-Commercial sheet shall be uploaded. The bidder shall note that the value of pendency of work should be considered based on financial progress achieved in the particular work as on the date of bid submission. The statement should be certified by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
Even though the Bidders meet the above criteria, they are subject to be disqualified if they have: i) made misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements. And/or ii) record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion, litigation history, or financial failures etc. and/or iii) Participated in the previous Tender for the same work and had quoted unreasonably high tender prices and could not furnish rational justification. and/or iv) Black-Listed due to non-performance in execution of works by any ESCOMs/Govt. Utilities/PSUs as on date of bid submission. and/or v) Defaulted/short closed due to non-performance in execution of works against the order placed by any ESCOMs/Govt. Utilities/PSUs as on date of bid submission. Scanned copy of the self-declaration in the prescribed format as per Annexure on notarized stamp paper of Rs.500/- shall be uploaded. The self declaration shall clearly indicate the tender enquiry no. and date on which declaration is done.
Litigation History: The Tenderer should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the preceding five years. A consistent history of awards involving litigation against the Tenderer or any partner may result in rejection of Bid. Scanned copy of the self-declaration on notarized stamp paper of Rs.500/- shall be uploaded.The self declaration shall clearly indicate the tender enquiry no. and date on which declaration is done.
Any Tenderer/ Bidder from a country which shares a land with India will be eligible to bid in this tender only if the Tenderer is registered with the Competent Authority. (As per Government Order No. FD 455 Exp-12/2020 dated 25.08.2020.) Registration certificate issued by the competent authority shall be uploaded.
A certificate for having read the clauses is required to be submitted/uploaded by the tenderer separately in the following format: I have read the clause regarding restrictions on procurement from a Bidder of a country which shares a land border with India. I certify that this Bidder is not from such a country or, if from such a country, has been registered with the Competent Authority. I hereby certify that this Bidder fulfils all requirements in this regard and is eligible to be considered. (Where applicable, evidence of valid registration by the Competent Authority shall be attached.) (As per Government Order No. FD 455 Exp-12/2020 dated 25.08.2020.) Scanned copy of the self-declaration in the prescribed format as per Annexure on notarized stamp paper of Rs.500/- shall be uploaded.The self declaration shall clearly indicate the tender enquiry no. and date on which declaration is done.
The Annual Turnover of the Bidder in at least two financial years should not be less than two times the amount put to tender in any of the previous five financial years i.e., (2020-21, 2021-22, 2022-23, 2023-24 & 2024-25).Note: Updated to the FY in which the tenders are invited. Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the FY in which the tenders are invited. Scanned copies of the audited Annual Accounts statements such as P&L statement, Balance sheets with UDIN of CA for the respective FYs shall be uploaded.
The Liquid Assets as on the last working day of previous month or at a later date before submission of the bid consisting of Cash at Bank plus Term Deposits plus availability of fund based credit facility in any Nationalized/scheduled Bank shall not be lesser than 25% of the amount put to tender. The cash at bank, term deposits and availability of fund based credit facilities shall be supported by a certificate issued by Nationalized/scheduled Bank shall be uploaded. If the Tenderer has banking with more than one Bank, then the available liquid assets mentioned above on a particular date i.e., as on the last day of previous month or at a later date before submission of tender shall be the same date and time for all the banks. In case of Fund based credit facility, the certificate issued by the Nationalized/ Scheduled Bank duly mentioning sanctioned limits, funds utilized so far and balance available as on the last day of previous month or at a later date, before submission of the bid shall be uploaded.
NOT APPLICABLE
NOT APPLICABLE
NOT APPLICABLE
NOT APPLICABLE
₹1,640
₹4.8 L
24 Apr 2026
27 Mar 2026
27 Apr 2026
2 Apr 2026
2 Apr 2026
Strengthening of HT / LT Network by establishing 3 new feeders for evacuating of power and to convert existing HT/LT overhead lines to HT UG cable and LT AB Cable in Kanakapura Division of Ramanagara Circle, BESCOM for a period of one year on Rate Contract under Total Turnkey Percentage Quoting Basis
Supply of 11kV Class 3x400 Sq. mm XLPE UG Cable (Round Armoured)
Supply of Heat Shrinkable Outdoor Type Cable Termination Kit Suitable for 3Cx400 Sqmm XLPE Cable
Supply of Cable Covering Tiles 125x250x40 mm
Supply of Collars for RCC Hume Pipe 150 mm Dia
Supply of Route & Joint indicating slab with MS Anchor rod
Supply of 11 kV, 400 Amps Double Break GOS
Supply of HT ST Support 50x8 mm Flat - GI
Supply of 11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod)
Supply of Single H Frame without Transformer Seating and Seating angle support cross arm for 11 Mtr Spun Pole for 63/100/250/500kVA (OH Line) - GI
Supply of 11 kV, Special 3 Pin Cross Arm - GI
Supply of 11kV, 45kN Polymeric Insulator
Supply of Rabbit ACSR Conductor
Supply of Transparent Alkathine tube 19 mm dia, 2 mm thick in coils of 30 Mtr
Supply of Guy Clamp - GI
Supply of Turn Buckle (GI)
Supply of Anchor Rod using 12 mm rounds/Guy Rod - GI
Supply of Guy Wire 7/10 SWG
Supply of GI Wire 10 SWG
Supply of Pre - Stressed Tubular Spun Pole 11 Mtr Long - 500Kg WL (Dwg No. BESCOM/GM/QS&S/45 Dtd 24.11.2018) as per IS-13158:1991
Supply of 11KV Horizontal cross arms
Supply of RCC Pole clamp - GI
Supply of PSCC Pole clamp - GI
Full Threaded Bolt & Nut as per IS-1367 - GI of various sizes
Supply of LT 4 pin cross arm -GI
Supply of Guy wire 7/10 SWG
Supply of Spiral Earth Electrode
Supply of Heavy Duty Copper Terminal Long Barrel 120 Sqmm
Supply of PG clamps for Rabbit conductor - Rabbit to Rabbit
Supply of 11kV, 3 Core HTUG XLPE Insulated Cables 240Sq.mm XLPE
Supply of Heat Shrinkable Straight Through Jointing Kit for XLPE Cable suitable for 3x400 Sq. mm Cable
Supply of Heat Shrinkable Straight Through Jointing Kit for XLPE Cable suitable for 3x240 Sq. mm Cable
Supply of Artificial / Manufacture Sand & Spreading the sand (Per Unit=PerCMT)
Supply of GI Pipe, 150 mm Dia for drain crossing, cable raising etc.,
Supply of GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete. Minimum Weight of GI Pipe: 7.3 Kging purposes packed in 50kg gunny bags
Supply of Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each
Supply of Good Quality Salt for grounding purposes packed in 50 Kg gunny bag
Supply of PVC Insulation Tape Rolls in 10 Mtr
Supply of HS Outdoor type Cable Termination Kit Suitable for 3X240 Sqmm. Cable (Per Unit= Per Kit)
Supply of RCC Hume Pipe, 2000 mm Long, 150 mm Dia
Supply of DP Set (2 Pole Strucrure Kit) as For RCC Pole - 9 Mtr Long, 145KG WL/PSCC Pole - 9 Mtr Long, 300Kg WL - MS
Supply of H - Frame Set for fixing 11kV, 200 Amps SB GOS - MS
Supply of 11 kV, 200 Amps Single Break GOS
Supply of 1.1kV Class 3 Phase Aerial Bunched Cable of size 3x95+1x16+1x70 Sq. mm
Supply of PSCC Pole - 9 Mtr Long, 300/200 Kg WL
Supply of Three Phase Distribution box for 6 Connections
Supply of Piercing connector suitable for 16 Sq. mm - 95 Sq. mm AB Cable - Service Connections
Supply of Piercing connector suitable for 16 Sq. mm - 95 Sq. mm AB Cable - Street Light Connections
Supply of Suspension Clamp Assembly 16 to 70 mm ( Excluding pole clamp & Eye Hook )
Supply of Pole clamp for HT/LT AB cable
Supply of Eye Hook (Flat type) for fixing Clamps
Supply of Dead End Clamp/Anchor Clamp Assembly 25 to 95 Sq mm (excluding pole clamps and Eye hook)
Supply of Universal Hook, Bolts & nuts
Supply of T-connector KZ3 95
Supply of Straight Joint Suitable for 95 Sqmm, LT ABC - MJPT Type
Supply of Pre-Insulated lugs-CPTAU for 95 Sqmm
Supply of End cap for 50/70 Sqmm
Supply of PVC Insulated wire 25 Sqmm
Supply of PVC Pipe 40 mm Dia
Supply of PVC Bend - 40 mm Dia
Laying of 3*400 Sqmm XLPE UG Cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff
Laying of 3*240 Sqmm XLPE UG Cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff
Labour charges for laying of cable using horizontal drilling with 6 inches bore size Without HDPE Pipe (Double cable=110*2)
Stringing of 1.1 kV grade Aerial Bunched 3 Core cable of XLPE insulation of size (3x95) (Phase Conductor) + (1x70) (Insulated Messenger Neutral) + (1x16) (Street Light Control)
Making of Straight Through Joints for 3Cx400/3CX240 Sqmm Cable
Making of HS Type Cable Termination Kit Suitable for 3Cx400 Sqmm Cable
Spreading and forming with sand all round the cable to a depth of 75 mm and width of 500 mm. (Does not include cost of sand).
Laying of RCC Hume Pipe, 2000mm Long, 150mm Dia
Fixing of Route & Joint indicating slab with MS Anchor rod
Refilling and consolidation (Per Unit=Per CMT)
Fixing of 11kV G O S 400A Double break
Erection of Spun pole 11.0 Mtr Long
Base Concreting 1:4:8, 1000x1000x150mm
Pole Concreting 1:2:4, 1000x100 x2500mm
Coping 1:2:4(as per actuals)
Fixing of Single H Frame without Transformer Seating and Seating angle support cross arm for 11 Mtr Spun Pole-GI
Fixing of 11 kV special 3 pin cross arm GI
Stringing of Rabbit ACSR Conductor (including pin binding, providing jumps, dead ending, etc.,)
Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing.
Digging of Pit for GUY SET Ordinary Soil
Concrete work for guy with Boulders, Mud and Sand
Erection of PSCC Pole 9Mtr long 200/300Kg WL
Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports (Perunit-Per Pit)
Fixing of 11KV Horizontal cross arms with H.T.Single top support,clamp,bolts,nuts.-GI
Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,)
Releasing & Restringing of Rabbit Conductor
Cable trench excavation, 1000x1x1=1000, Ordinary soil or 1000x0.6 x1=1000 (Per Unit=Per CMT)
Covering the cable with tile
Laying of GI Pipe, 150 mm Dia for drain crossing, cable raising etc.,
Erection of DP Set (2 Pole Strucrure Kit) as For RCC Pole - 9 Mtr Long, 145KG WL/PSCC Pole - 9 Mtr Long, 300Kg WL - MS
Erection of H - Frame Set for fixing 11kV, 200 Amps SB GOS - MS
Fixing of GOS including wiring (11 kV Single Break 200 Amps)
Erection of Three Phase Distribution box for 6 Connections
Fixing of Piercing connector suitable for 16 Sq. mm - 95 Sq. mm AB Cable - Service Connections
Fixing of Piercing connector suitable for 16 Sq. mm - 95 Sq. mm AB Cable - Street Light Connections
Fixing of Suspension Clamp Assembly 16 to 70 mm ( Excluding pole clamp & Eye Hook )
Fixing of Pole clamp for HT/LT AB cable
Fixing of Dead End Clamp/Anchor Clamp - 25 to 95 Sqmm insulated messenger with bracket
Fixing of Universal Hook, Bolts & nuts
Fixing of T-connector KZ3 95
Installation of Pre-insulated straight thru' joints-MJPT for 90 Sqmm cable
Fixing of Pre-Insulated lugs-CPTAU for 95 Sqmm
Fixing of End cap for 50/70 Sqmm
Releasing of 4ACSR Conductor
Releasing of Rabbit ACSR Conductor
Releasing of PSC/PSCC/PCC Pole
Releasing & Re-fixing of Service main
Releasing & Re erection of 25/63 Distribution Transformer
Releasing & Re erection of 9Mtrs Long Poles
Releasing & Re erection of Single Pole TC Structure
Releasing & Re erection of 11 kv Horizontal
Releasing & Re erection of 4pin Cross Arms
Releasing of Horizontal cross arm including Single Top Support Brace and Insulator fixing
Releasing of 8Mtrs PCC Poles
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Kanakpura Tender document Enquiry No 1065.pdf
Tender Document • 2.75 MB
VOL-II-Spec_Drawings.zip
Others - SPECIFICATIONS • 10.14 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .