ADDN ALTN TO CHILDREN PARK WITH PROVISION OF WALKING PLAZA GARDEN LIGHT BENCHES RAOILING AND PERGOLAS AND PROVN OF WALL MOUNTED KITCHEN CABINET AND MODULAR KITCHEN TROLLEY AT STAFF OFFR MD ACCN NO P 3 P 4 P 8 P 11 P 17 LAKEVBIEW RD AT MILIT GIRINAGAR

Amount

B/R PORTION Surface excavation n.exc 30cm deep and average 15cm and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exc 1.50mtr wide and not exc 1.50mtr in depth for foundation laying of cable/pipe etc and getting out in soft / loose soil complete all as specified and directed.

Returning filling in, well watering ramming in layers not exceeding 15cm thick complete all as specified and directed.

Removing of excavated soil to a distance not exc 50mtrs and depositingwhere directed at a level not exc 1.50 mtrs above the starting point complete all as specified and directed by Engr-in-charge.

M&L for filling of loose soil/sand around the playing equipments , laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering as specified and directed by Engr - in - charge

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C-1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6, complete all as specified and directed.

M & L for rendering 15mm thick on cement concrete block masonry/concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement, complete all as specified and directed.

M & L for Walling of random rubble stone masonry, well bonded, bedded and solidly hearted built in cement mortar 1:4, brought up to courses, complete all as specified and directed.

M & L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement morter 1:4 complete all as specified and directed.

M&L for two coats of cement base paint over a coat of primer on New surfaces of wall complete all as specified and directed.

M&L for one coats of cement base paint on old surfaces of wall complete all as specified and directed.

S & F for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F for Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed.

S & F for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed.

M&L for precast cement concrete louvres and jallies type B0 (1:2:4), 25mm thick (mea sured solid), including all mould- ings but excluding frame set in cement mortar (1:4) complete all as spcified and directed.

M & L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, including15mm thick screed bed in cement mortar 1:4, over 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone agg) over 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base or floor set, jointed and pointed in neat cement slurry with grey cement and pigment as in floors complete all as specified and directed.

M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade on 15mm thick screed bed in Cement Mortar 1:4 over 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone agg) over 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base or floor complete all as specified and directed.

M&L hardcore of gauge n exc. 63 mm, broken stone or boulder spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for PCC 1:4:8 type D 2 (40 mm graded aggregate )Cement concrete in foundations, filling and mass concrete complete all as specified and directed.

M & L for 100 mm thick PCC 1:4:8 type-D2 as in sub-floors, sub-bases, floors/path and paving etc, finished even & rough, complete all as specified and directed.

M & L for 40 mm thick PCC 1:2:4 type B-0, (12.5mm graded aggregate) as in floors/path and paving etc, finished even & smooth complete all as specified and directed.

M &L two coat of synthetic enamel paint to steel surface over a coat of rex oxid primer exc 10 cm width or girth incl preparation of new surfaces complete all as specified and as directed .

M &L one coat of synthetic enamel paint to steel surface exc 10 cm width or girth incl preparation of old surfaces complete all as specified and as directed .

M&L for framed MS work as in doors or gates of angle or other section with gusset plates, rails braces etc, complete drilled for fixing of steel sheeting or other covering, door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings also fastening and fixing with locking arrangement.(Fe-410 W Gde-E-250 Quality -A) complete all as specified and as directed .

S&F for 1 mm thick stainless steel letter in English 300 mm high fixed on any surface including necessary scffolding etc. (Width of each letter should be in proportionate with heigth of letter) complete all as specified and as directed

S & F Mild steel, plain sheet 1.60mm thick in steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed.

M & L for non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

Dismantling stone slab of any description or thickness in floors, approns etc complete all as specified and as directed.

M&L machine cut Granite slab 18 to 20 mm thick as in cooking platform ,floor,steps, pillars, window cills,and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter (1:2) 3mm thick, with araldite adhesives set and jointed with white cement slurry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as specified and directed. Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish complete all as specified and directed.

S & F Machine cut cuddappa stone slab one side polished 20 to 25mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 20mm screed bed in cement mortar (1:6) complete all as specified and directed.

S & F for Modular kitchen cabinet and wall cabinet comprising of with including necessary all other fixing arrangement and screws as per requirement at site etc. All cabinet made of factory made moulded 18mm thick glossy/Matt Finish solid waterproof MDF board and outer door and topside shall be of 18mm thick perlam coloured solid MDF board, for fixing the items fitted in position and complete all as specified directed by Engr-in-Charge.

S & F 12 mm thick factory made moulded glossy/Matt Finish solid waterproof MDF board for kitchen wall cabinet back side and etc comprising of with including necessary all other fixing arrangement as per requirement at site. For fixing the items fitted in position to walls minimum screws size 120 mm complete all as specified directed by Engr-in-Charge.

M & L preparation of old distempered surfaces of wall and applying one coat of oil bound distemper etc complete all as specified and directed.

M & Lfor coloured glazed ceramic tiles of size 450mm x 300mm x 7mm thick as in dado/ skirting of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

S&F stainless steel kitchen sink with drainage board of overall size 915x460mm and bowl size 410x330x160mm with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets complete all as specified and directed.

S & F for stainless steel grill pattern Bottle Rack size 8" wide and 20" deep including stainless steel channels of make hettich, godrej or hafale.Dia of stainless steel bar used to make grill pattern shall be min 5mm fixing the items fitted in position and complete all as specified directed by Engr-in-Charge.

S & F for stainless steel grill pattern basket of size 21"x4"x20" deep including stainless steel drawer channels of make hettich, godrej or hafale . Dia of stainless steel bar used to make grill pattern shall be min 5mm.Fixing the items fitted in position and complete all as specified directed by Engr-in-Charge.

S & F for stainless steel grill pattern basket of size 21"x8"x20" deep with including stainless steel drawer channels of make hettich, godrej or hafale. Dia of stainless steel bar used to make grill pattern shall be min 5mm. Fixing the items fitted in position and complete all as specified directed by Engr-in-Charge.

S & F for stainless steel Cuttlery Box of size 21"x4"x20" deep with including stainless steel drawer channels of make hettich, godrej hafale or equivalent as approved. Thickness of stainless steel sheet shall be 1mm thick. Fixing the items fitted in position and complete all as specified directed by Engr-in-Charge.

S & F for stainless steel grill pattern Plate rack of size 21"x8"x20" deep with including stainless steel channels of make Hafele, Godrej, Hettich .Dia of stainless steel bar used to make grill pattern shall be min 5mm. Fixing the items fitted in position and complete all as specified directed by Engr-in-Charge.

S & F for stainless steel grill pattern Cup and Soucer Rack of size 21"x6"x20" deep with including stainless steel channels of make Godrej, Hettich or Hafale. Dia of stainless steel bar used to make grill pattern shall be min 5mm. Fixing the items fitted in position and complete all as specified directed by Engr-in-Charge.

S&F for stainless steel grill pattern Grain Trolley with base of size 21"x24"x20" deep and including stainless steel channels of make :- Hettich, Godrej or Hafale. Dia of stainless steel grill shall be minimum 5mm. Fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge.

S&F chromium plated auto hinges split box type overlay door mounting option, opening angle 110 degree fixed, with screw complete all as specified and directed.

S&F 100 mm long cupboard stainless steel handles fixed with nuts screws and washer of complete all as specified and directed.

M&L for Cupboard magnet of size 50mm including high quality magnet and steel plate of complete all as specified and directed.

M&L for stainless steel frame work for fixing of modular kitchen below kitchen platform including necessary welding, fixing in true level and position as per availability of size below kitchen platform complete all as specified and directed by Engg-in-Charge including demoli demolition of existing shelvs below existing kitchen platform and removal.

E/M PORTION Supply & laying 50 mm outer dia double wall corrugated pipe (DWC) ISI Mark of enclosing cable below ground/ road surface, to a required depth, including suitable size coplers for jointing of pipe all as per site requirement complete all as specified and directed.

Supply laying and testing UG cable XLPE insulated, armoured hevy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area complete all as specified and directed. (a) 4 Core 6 Sqmm Note : 1. Lugs and glands are deemed to be included in the rate quoted for laying of cable and to be used property whereever required while connecting cables to the panel board. 2. Earth work such excavatiion, refilling, etc shall be measured separately under relevant items.

M&L for GI pijpe light grade in repair for road crossing / on wall / on pole for cable protection of 50mm dia complete all as specified and directed.

Material and labour for cutting of bituminous road/ floor for laying of pipe / cables 45 CM wide and not exceeding 1.5 meter deep including refillibng / with material and, watering well ramming / compacting and making good with PCC 1:2:4, type B-1, 100 mm thick complete all as specified and directed.

S&F outdoor type FRP junction box light weight suitable for mounting MCB 4 pole x2 Nos, flat iron clamp duly painted with two coats of aluminium paint over a coat of red oxide primer and GI nut, bolts, washers and necessary connector for loop in loop out cable connection and suitable size galnds, of size 300x 200 x 105 mm complete all as specified and directed.

S&F MCB, TPN 32 Amps, 240 volts, rupturing cabacity 10 KA, 'C' series complete all as specified and directed.

S&F steel tubular swaged poles complete with cast iron base plate, final taper plug, bolts, nuts and screws type 410 SP-22 (8.5 metres long) complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate in foundation of poles & making good the disturbed portion of road/floor/platform etc including necessary form work including fixing of bolts for the mounting of pole complete all as specified and directed.

M&L plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as platform, mass concrete, coping to pole for embedding stay roads including necessary form work and applying two coats of cement based paint on coping, platform,complete all as specified and directed.

Supply and fix LED Garden light / Bollard light, not less than 12 Watts (Warm White / White as directed) including excavation, PCC foundation and suitable water proof junction fox for connecting the lights complete all as specified and directed.

S&F 100 watts flood light, energy saving, environmental friendly, long life aesthetically designed with symmetrial light distribution, including angle iron & Clamp for fixing the flood light, provision of 3 Core, 2.5 Sqmm copper cable in rigid PVC conduit of 20 mm size with saddling and all other accessories such as tees, bends, mounth tube ends complete all as specified and directed including dismantiling the old unserviceable LED fitting.

J.G.Goel (BID ID -3155184)