Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹20.0 LAccepted-AOC C O S 1 ESS GEE COMPLEX NEAR J K BANK SONAWAR BAZAR B B CANTT SRINAGAR 190004 J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190004 | L-1 | Accepted-AOC BEING L1 | |
| 2 | L-2₹27.8 L+₹6.5 L (30.3%)Rejected-Finance | L-2 | Rejected-Finance L-2 | |
| 3 | L-3₹29.6 L+₹8.3 L (38.8%)Rejected-Finance R O ABI GUZAR THE BUND SRINAGAR 190001 J K | SRINAGAR | JAMMU AND KASHMIR | 190001 | L-3 | Rejected-Finance L-3 | |
| 4 | L-4₹29.9 L+₹8.6 L (40.2%)Rejected-Finance RAWALPORA WANABAL PATI YAYIL POST OFFICE SANAT NAGAR SRINAGAR 190005 J K | SRINAGAR | JAMMU AND KASHMIR | 190005 | L-4 | Rejected-Finance L-4 | |
| 5 | L-5₹41.8 L+₹20.5 L (96.0%)Rejected-Finance KHUNMOH SRINAGAR PIN 191104 J K | SRINAGAR | SRINAGAR | J K | 191104 | L-5 | Rejected-Finance L-5 |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
29 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 861 EWS
GE 861 EWS c/o 56 APO
CERTAIN MISC B R REPAIRS TO TEMP BLDGS OF UPPER GRN KHREUH AND PERIODICAL SERVICES TO TEMP BLDGS OF UPPER GRN KHREUH AND SHER E SHALI UNDER GE 861 EWS
2023_MES_593555_1
GE 861 EWS-20/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE 861 EWS
As per tender documents
7 documents required · 7 mandatory
₹500
GE 861 EWS
₹86,000
Yes
21 Jul 2023
6 May 2023
5 Jun 2023
6 May 2023
29 May 2023
22 May 2023
Amount
Taking down cement plaster from brick or concrete or stone surfaces including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.
Taking down chowkhats or frame with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each including cutting holes for taking out hold fast and making good disturbed surface with existing surface, complete all as specified and directed.
Taking down chowkhats or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each including cutting holes for taking out hold fast and making good disturbed surface with existing surface, complete all as specified and directed.
Taking down shutter of any description not exc 1.0 Sqm each including cutting holes for taking out hold fast etc, complete all as specified and directed.
Taking down shutter of any description exc 1.0 Sqm but not exc 2.00 Sqm each including cutting holes for taking out hold fast etc, complete all as specified and directed.
Dismantling timber scantling 40 Sqcm & over in section, framed in any position, complete all as specified and directed.
Dismantling timber scantling in fillets, rails, posts, rafters etc. under 40 Sqcm in section in any position and framed work, complete all as specified and directed.
Dismantling post or struts (Wood) in concrete, brick work, masonary etc, any section including taking out embeded portion and making good distrubed portion/ surface, complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed.
Dismantling plain or corrugated steel sheeting of any gauge & thickness including Nainital or similar pattern roof coverings, complete all as specified and directed.
Dismantling structural steel, framed trusses etc, not exc 10 mtr in span, complete all as specified and directed.
Dismantling structural steel work including door gates but excluding framed work, complete all as specified and directed.
M&L for cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in walls or retaining walls of any thickness, size or shape including pilasters, buttresses, columns, pillars, boundary pillars and post (incl caps and base), complete all as specified and directed.
M&L for walling of random rubble, uncoursed well bonded, bedded and solidly hearted for random or polygonal rubble walling, brought up to course, built in CM 1:4, complete all as specified and directed by Engineer-in-Charge.
M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exceeding 6 metre mean radius, built in cement mortar 1:6, complete all as specified and directed by Engr-in-charge.
M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished the surface even and fair without using extra cement, complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on other than fair faces brick work or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:3, complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed at site, complete all as specified and directed.
S&F 35mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats at site, complete all as specified and directed.
S&F 35mm thick 2nd class kail hard wood glazed & skeleton shutters for door, open rebated and prepared to receive glass, gauge etc. (internal sash bars) edges of framing plain, chamfered or rounded, fitted with cuts and mitred beads for securing glass etc. sizes of members of shuttered as specified in SSR Part- I Section-8 Clause 8.20 (a), complete all as specified and directed.
S&F 30mm thick 2nd class kail hard wood glazed & skeleton shutters for windows/ ventilators open rebated and prepared to receive glass gauge etc, edges of framing plain, chamfered or rounded , fitted with cuts and mitred beads for securing glass etc. sizes of members of shuttered as specified in SSR Part- I Section-8 Clause 8.24 (b), complete all as specified and directed.
S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing.
S&F 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing
S&F 300mm long mild steel sliding door bolt, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 Nos bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed.
S&F 200mm long barrel tower bolt, stove enamelled black with bright bolt, complete all as specified and directed.
S&F 150mm long barrel tower bolt, stove enamelled black with bright bolt, complete all as specified and directed.
S&F 150mm long mild steel pressed handle, oval type, stove enamelled black, complete all as specified and directed.
S&F 100mm long mild steel pressed handle, oval type, stove enamelled black, complete all as specified and directed.
S&F aluminium anodised barrel tower bolts, extruded section of size 200mm, complete all as specified and directed.
S&F aluminium handle, cast type, anodised of size 150mm, complete all as specified and directed.
S&F butt hinges, medium weight, cold rolled mild steel, size 100mm, complete all as specified and directed.
S&F butt hinges, medium weight, cold rolled mild steel, size 75mm, complete all as specified and directed.
S&F ordinary rat tail rod pattern springs, brass, 300 mm size, including roller and roller plate, complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, of size 150mm, complete all as specified and directed.
S&F 4.0mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads/ glazing pins in squares not exc 0.50 Sqm in each pane, including hacking out old broken/ damaged glass in any position, complete all as specified and directed.
S&F 4.0mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads/ glazing pins in squares not exc 0.50 Sqm in each pane, complete all as specified and directed.
M&L 4mm thick figured glass pin headed type and glazing with oil putty or fixed with beads/ glazing pins in squares not exc 0.50 Sqm in each pane including hacking out old broken/ damaged glass in any position, complete all as specified and directed.
S&F galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.
S&F in repair galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.
S&F anodised aluminium snap grid of size 605mm x 605mm frame work for false ceiling including straining with GI wire 4 mm dia, complete all as specified and directed.
S&F 10mm thick PVC insulation panels with EPS stuck to 1mm thick plain PVC sheet, suitably placed in false celing grid made of aluminium GI/MS, complete all as specified and directed.
S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC/ wooden frame, complete all as specified and directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make frame, complete all as specified and directed.
S&F 9mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces, fixed with screws to timber frame work on wall & ceiling, complete all as specified and directed.
M&L for 2nd class soft wood, plain fillets, square, rectangular or triangular in section, secured with nails or brads, sectional area exc 6.0 Sqcm but not exc 13 Sqcm, bull nosed splayed chamfered or rounded on edge or face, complete all as specified and directed.
S&F in repair 40mm thick, 2nd class hardwood planks, planed one side with butt joints and fixed with nails in any position, complete all as specified and directed.
S&F in repair weather boarding of 2nd class hardwood, clean sawn, plain, 20mm thick or feather edges, fixed with 30mm lap joints, complete all as specified and directed.
M&L for 2nd class hard wood, clean sawn, fixed as in scantling, roof perlins, rafters, ridges etc, complete all as specified and directed.
S&F MS roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections, post) including distance pieces, cleats etc, conforming to Fe-410 Gde E-250 quality - B, complete all as specified and directed.
S&F MS plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment including riveted, bolted or welded attachment, complete all as specified and directed.
S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based plain steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with 'L' or 'J' type screws and washers, as in roofs, walls etc. with grade of zinc coating 275 gram/ Sqm, complete all as specified and directed.
S&F 0.63mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 gram/ Sqm, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistance primer, complete all as specified and directed.
M&L for preparation of new palstered surfaces of walls and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed.
M&L for preparation of new wooden surfaces or articles of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
M&L preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
Preparation of old surfaces of walls, plastered or unplastered including brooming down or steel wire brushing, scraping down smoke soot, moulds moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on wall, complete all as specified and directed.
All as per item No 62 above but applying one coat of white wash on ceiling, complete all as specified and directed.
All as per item No 62 above but applying one coat of cement based paint on wall, complete all as specified and directed.
All as per item No 62 above but applying one coat of oil bound distemper on wall, complete all as specified and directed.
Preparation of old surfaces of walls plastered or unplastered and applying two coats of cement base paint, complete all as specified and directed.
Complete removal of existing treatment of walls & applying two coats of oil bound distemper white or tinted over a coat of primer and 3mm thick wall care putty, complete all as specified and directed.
Preparation of old painted wooden surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
Preparation of old painted wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed.
Preparation of old painted CGI sheet surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint (in plain or camouflage) pattern, complete all specified and directed.
Preparation of old painted CGI sheet surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (in plain or camouflage) pattern, complete all specified and directed.
M/S MOHAMMAD SHABAN AND CO
M/S GASSI CONSTRUCTION AND CO
FIRDOUS AHMAD BABA
M/S HAFIZ AND SONS
M/S STARE BUILDERS
M/S SHEIKH FEROOZ AHMAD
M/S Sofi Brothers
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .