Loading…
Loading…
Tender Value
₹6.1 Cr
EMD Value
₹12.2 L
Closing Date
2 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
S AND T
14 conditions · 2 needing a document upload
Financial Eligibility Criteria ( para 10.2 of GCC 2022 )The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (Ref:GOI, Ministry of Railways, Railway Board, New Delhi. Advance Correction Slip No.1 of IRGCC ,April 2022 Lr.No.2022/CE- I/CT/GCC-2022/Policy Dt:14.07.2022 )
Technical Eligibility Criteria ( 10.1 part 1 of GCC 2022) (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be sub letted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Defination of Similar Work :- Supply, installation testing & commissioning of Automatic Fire Detection & Alarm System in any government organization or PSUs. It can be an independent work or part of any signalling work. OR Supply, installation testing & commissioning of Automatic Fire Detection Alarm and suppression System, in any government organization or PSUs. It can be an independent work or part of any signalling work.
14 conditions · 6 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
I/We have visited the works site and I/ We am/ are aware of the site conditions and IRGCC 2022,Correction slips of the GCC.
Replacement of defective / aged Non RDSO Fire & Smoke detection Alarm system with RDSO type in Relay Room, equipment room and Battery room at 30 no. of station / Locations and Fire aspiration system in KZJ - SC - WD, VKB - PRLI, KHNP- KUKT, DKJ-MUGR, PSHP-BDCR, MTMI-SSLM section (B & D Routes) over SC division.
C_SG_36_616~SCR
C_SG_36_616
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹12.2 L
11 Aug 2026
11 Aug 2026
19 Aug 2026
58 items across 4 schedules · ₹6,09,77,125.36 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Printing, Binding & supply of registers with latest proforma given by in-charge officer each register of 100 pages. (TO BE INSPECTED BY CONSIGNEE) ITEM UNIT PER REGR | Numbers | 234.00 | 358 | 83,772 |
| 2 | Supply of Godrej shelf storage of 916 x 486 x 1981 mm or similar (TO BE INSPECTED BY CONSIGNEE) | Numbers | 20.00 | 26,479 | 5,29,580 |
| 3 | Supply of Double key lock for relay room. (TO BE INSPECTED BY CONSIGNEE) | Numbers | 30.00 | 1,233 | 36,990 |
| 4 | Supply of Lugs and Eyelets: Aluminium lugs 25 sq.mm of reputed make. (TO BE INSPECTED BY CONSIGNEE) | Numbers | 2500.00 | 25 | 62,500 |
| 5 | Copper lugs 10sq.mm of reputed make. (TO BE INSPECTED BY CONSIGNEE) | Numbers | 2500.00 | 12 | 30,000 |
| 6 | Copper eyelets to suit 16/0.2 wire Dowell's or similar make. (TO BE INSPECTED BY CONSIGNEE) | Numbers | 6000.00 | 3 | 18,000 |
| 7 | Copper eyelets to suit 10.sqmm wire Dowell's or similar make. (TO BE INSPECTED BY CONSIGNEE) | Numbers | 2500.00 | 6 | 15,000 |
| 8 | Supply of non-deteriorating type of fuse holders and fuse links 240V AC/DC as per specification IRS: S 78-2006 or latest, IS 13703 (Part 2):1993 knife edge type fuse of E1 fuse link type (up to 20A) Fuse holder 20A capacity( TO BE INSPECTED BY RDSO) | Numbers | 500.00 | 220 | 1,10,000 |
| 9 | Fuse link 1A / 2A / 6A / 10A / 16A / 20A as specified by Engineer In charge.( TO BE INSPECTED BY RDSO) | Numbers | 5000.00 | 31 | 1,55,000 |
| 10 | Supply of Terminal block: 1 way Poly butylene Terephthalate (PBT) of size 60mm (link centre to centre) as per RDSO DRG. No. SA23745/Alt.5 or latest, SA23746/Alt.5 or latest, S23747/Alt.5 and specifications IRS: S 75-2006 Rev. 2.0 (Tentative) or latest, IRS: S 23-88 Amd. 1 or latest. ( TO BE INSPECTED BY RDSO) | Numbers | 2000.00 | 97 | 1,94,000 |
| 11 | Supply of Terminal block: 6 way Poly butylene Terephthalate (PBT) of size 25mm (link centre to centre) as per RDSO DRG. No. SA23756/Alt.3 or latest, S23757/Alt.4 or latest and specifications IRS: S 75-2006 Rev. 2.0 (Tentative) or latest, IRS: S 23-88 Amd. 1 or latest. ( TO BE INSPECTED BY RDSO) | Numbers | 200.00 | 406 | 81,200 |
| 12 | "Supply of modular terminal block (WAGO or similar) as per RDSO specification RDSO/SPN/189/2004 Ver. 3.0 or latest consisting the following parts:a) 2 conductor disconnect terminal block - 6 numbersb) End / intermediate plate suitable for 2 conductor disconnect terminal - 1 numberc) Screw less end stop similar to WAGO Model No. 249-117 -2 numbersd) Insulated jumper WAGO Model 280-402 - 5 numberse) Din Rail - 0.1 metre per set (in length of 1 metre for every ten set)"( TO BE INSPECTED BY RDSO) | Set | 500.00 | 703 | 3,51,500 |
| 13 | Supply of mini WSB markers for modular terminals WAGO Model No. or similar - 100 Nos. (TO BE INSPECTED BY CONSIGNEE) | Set | 5.00 | 64 | 320 |
| 14 | Supply of 35 Sq.mm PVC insulated multi- strand, single core, copper conductor 277/0.4 (277 wires, diameter of each wire is 0.4mm) cable as per IS:694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100- meter coil. Colour to be specified by Engineer in charge.( TO BE INSPECTED BY RDSO) | Metre | 1000.00 | 391 | 3,91,000 |
| 15 | Supply of 16 Sq.mm PVC insulated, multi- stand, single core, copper conductor 127/0.4 (127 wires, diameter of each wire is 0.4mm) cable as per IS: 694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100 meter coil. Colour to be specified by Engineer in charge. ( TO BE INSPECTED BY RDSO) | Metre | 1000.00 | 178 | 1,78,000 |
| 16 | Supply and wiring of Polymeric Positive Temperature Co- Efficient Device self resetting type (PPTC) of 2A rating suitable for railway applications of reputed make. The PPTC fuse shall be wired by soldering suitable flexible wire on both ends (all material except flexible wire has to be arranged by contractor).(TO BE INSPECTED BY CONSIGNEE) | Numbers | 2000.00 | 87 | 1,74,000 |
| 17 | Supply of Universal Locks with one steel key for every ten locks or part there of (For example, if locks ordered is 10, 1 key is to be supplied and if locks ordered is 20, 2 keys to be supplied. However, 2 keys to be supplied if locks ordered is between 11 and 19).(TO BE INSPECTED BY CONSIGNEE) | Numbers | 200.00 | 195 | 39,000 |
| 18 | Supply, installation and wiring of KLCR relay 24V DC Non-AC immunized with 4F/4B contacts. This also includes termination of cable and required wiring in KLCR box.( TO BE INSPECTED BY RDSO) | Numbers | 50.00 | 10,740 | 5,37,000 |
| 19 | "Supply of Q series Magnetically Latched (QL1) type Relay,24V DC, complete with plug board with connectors and retaining clips confirming to BRS 935A and RDSO specification IRS S:34 & IRS S:23 or latest. QL1- 11F/4B, The interlocking code: ABDEG"( TO BE INSPECTED BY RDSO) | Numbers | 50.00 | 5,701 | 2,85,050 |
| 20 | Supply of 24 V DC plug-in type miniature tractive armature, AC immune relay complete with plug board, retaining clip/ATC Clip and connectors as per IRS: S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 60-78 Amd. 1 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable). QBCA1- 2HF/4B, Interlocking code: BCEJK as per specifications BRS 943 or Latest ( TO BE INSPECTED BY RDSO) | Numbers | 50.00 | 8,307 | 4,15,350 |
| 21 | "Supply of Transformer - Rectifier as per specification IRS: S 91-2014 Ver. 1.0 or latest. Transformer-rectifier set with 110V AC input, 24V-30V DC output, 1A." ( TO BE INSPECTED BY RDSO) | Numbers | 30.00 | 19,470 | 5,84,100 |
| 22 | Supply and fixing of 'AHUJA' or similar make horn type loud speaker 15W 8 ohms impedance at LC gate Road signal.(TO BE INSPECTED BY CONSIGNEE) | Numbers | 50.00 | 1,407 | 70,350 |
| 23 | Supply and fixing of Electronic Hooter unit 24/110 DC of approved design/make able to drive 2 No. of Speakers of 8 ohms 15W. (TO BE INSPECTED BY CONSIGNEE) | Numbers | 25.00 | 2,732 | 68,300 |
| 24 | Supply and installation of Electronic Flasher unit, able to drive 2 No. of flasher lights. (TO BE INSPECTED BY CONSIGNEE) | Numbers | 25.00 | 2,572 | 64,300 |
| 25 | Supply of Surveyor's Wheel (rodometer). (TO BE INSPECTED BY CONSIGNEE) | Numbers | 20.00 | 4,245 | 84,900 |
| 26 | Supply of Cable Route Locator set consisting of receiver with active line trace frequency, passive line trace and depth measurement on active line tracing with 5 watts cable line transmitter with frequency indicator, power indicator, frequency mode sheet, power 'ON' & 'OFF' indicator mode toggle induction mode. High voltage warning and suitable rechargeable cells for both transmitter and receiver with suitable charger with carrying case. Make RIDGID SeekTech SR-20/ Stanlay ST-Loc 10 or equivalent or better as approved by Engineer In charge.(TO BE INSPECTED BY CONSIGNEE) | Numbers | 5.00 | 3,77,600 | 18,88,000 |
| 27 | Supply of Electric Track Drilling machine shall be suitable for operating on 110V, 50Hz AC / DC fully insulated and no-load RPM shall be 1900 / 1000 and the power input is 550W. Machine with suitable inter changeable track mounting stand and drilling to be designed with adjustable facility and along with a set of 20 no's of 7.2 mm dia Bosch MSS drill bit, Drill check dia. 13 mm and drilling dia in steel 8 mm/13 mm along with packing accessories. (TO BE INSPECTED BY CONSIGNEE) | Numbers | 10.00 | 22,602 | 2,26,020 |
| 28 | "Supply of Tool Kit as under - 1. Standard Tool Bag (CANAVAS) - 1 No. 2. Soldering Iron (Make Soldern / Philips) - 60W / 230V -1 No. 3. Digital Multimeter - True RMS Meter (Philips / Fluke / Rishabh Rish 18S) Upto 20M, 10A, 5kHz, 2mV to 750V AC, 200V DC - 1 No. 4. Screw Driver set of 6 pieces (Taparia Make) - 1 No. 5. Cutting plier 6" (Taparia Make) - 1 No. 6. Side Cutter (Wire cutter) 6" (Taparia Make) - 1 No. 7. Nose plier 6" (Taparia Make) - 1 No. 8. Wire stripper (Taparia Make) - 1 No. 9. Fiber tape 3m length - 1 No. 10. Scale 6" (for measuring tongue rail opening) - 1 No. (Transparent Plastic Material) 11. Pop spanner wrench 6mm to 22mm (Auto adjustable spanner) of Taparia make - 1 No. 12. Pop spanner wrench 10 mm to 30 mm (Auto adjustable spanner) of Taparia make - 1 No. 13. Pop spanner wrench 15mm to 41mm (Auto adjustable spanner) of Taparia make - 1 No. " "14. Hacksaw frame with blade 6"", 4" width (for cutting cable) - 1 No. 15. Hammer 3.0 lb - 1 No. 16. Chisel 6" (for cutting bond wire) - 1 No. 17. Poker 8" (for removing bond wire, bond pin) - 1 No. 18. Heavy duty Screw Driver 12" with plastic handle (Taparia Make) - 1 No. 19. Test piece (Point wedge piece) - 1 No. 20. Multi colour rechargeable LED torch light - 1 No. 21.Universal key - 1 No. 22. Box spanner for 6 way terminals (13mm) - 1 No. (Insulated) 23. Nylon brush (for cleaning purpose) - 1 No. 24. Sealing plier - 1 No. 25. Crimping Tool (1.5 to 16sq.mm) - 1 No. 26. Feeler gauge - 1 Set 27. TSR Meter (for testing condition of track circuit) - 1No. 28. Wooden Block (60mm x 60mm) - 1 No. 29. Track shorting clips - 1 No. 30. Tester - 1 No. 31. Flat file 12" length x 1" width - 1 No. 32. Clip on meter - 1 No. 33. Digital Earth meter - 1 No. 34. Meggar - 1 No. " (TO BE INSPECTED BY CONSIGNEE) | Set | 10.00 | 46,332 | 4,63,320 |
| 29 | Electronic earth tester Model No. 4680B Meco make or higher version or similar. The earth tester shall be non-contact type without requirement of auxiliary electrodes and shall have 4 digit 9999 LCD display with ground resistance range from 0.025 Oms to 1500 Oms. (TO BE INSPECTED BY CONSIGNEE) | Numbers | 10.00 | 83,799 | 8,37,990 |
| 30 | Supply of Printer for maintenance terminal at station - HP LaserJet 1020 Plus or similar. (TO BE INSPECTED BY CONSIGNEE) | Numbers | 10.00 | 16,135 | 1,61,350 |
| Schedule total | ₹81,35,892 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ListofAnnexures.pdf
ATTACHMENT
corrslip1to11compressed.pdf
ATTACHMENT
TenderDocumentT.No.616_1.pdf TENDER DOCUMENT
ATTACHMENT
MAKEININDIA1_compressed1.pdf MAKE IN INDIA POLICY I
ATTACHMENT
MAKEININDIA2.pdf
ATTACHMENT
Tele_Cir_9-2023.pdf
ATTACHMENT
GCC_April-2022__1.pdf
ATTACHMENT
DRAWINGS.pdf
ATTACHMENT
MAKEININDIA1_compressed1.pdf
ATTACHMENT
TenderDocumentT.No.616_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].