REPAIR/MAINT OF SEWAGE SYSTEM DRAINAGE SYSTEM, BOUNDARY SYSTEM OF MD ACCN / OTM ACCN INCLUDING REPLACEMENT OF DAMAGE SEWAGE PIPE LINE AT SOUTH ZONE AT DIPATOLI CANTT

Amount

Cleaning of all blockage of sewage line of any type and any dia of sewer lines, manholes of any section and depth, in any situation by way of cleaning/de-sludging foreign materials as well as blockage of sewage line in between successive manholes manually /mechanically including desludging where required and ordered by Engineer-in-charge and keeping sewer line functional from floor traps, water closet, soil waste/vent pipe, gully trap upto final drop/outlet into septic tank/central sewage system terminating in other jointing Zone/Area or into sewage wells complete all as specified and directed. Note 1 : Two sweepers with T&P/Mechanical equipments shall be provided by contractor on each working day for 08 hours per day to clear the blockage of sewerage line/ manhole on day to day complaint basis by users. Note 2 : Contractor has to arrange the services even on holidays / Sundays, if any critical condition arises, complaints lodged.

Exavation over area not exc1.5mtr deep and getting out in soft/loose soil completed as all specified and directed at site.

Ditto as per item No-2 above but exceeding 1.5 mtr but n.exc 3.00 mtr deep.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil etc. including trimming bottom and sides of trenches, leveling/ grading and ramming bottom of excavation complete all as specified and directed.

Excavation in trenches n exceeding 1.5 m wide and exceeding 1.5 m in depth but not exceeding 3 mtr depth and getting out in soft/loose soil etc. including trimming bottom and sides of trenches, leveling/ grading and ramming bottom of excavation complete all as specified and directed.

Returning, filing in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Removing surplus excavated soil to a distance n.exc 50 meter and depositing where directed at leveln.exc 1.50 m above the starting point complete all as specified and directed.

Demolition and breaking up 150mm dia drain pipes (saltglazed, stoneware, AC or reinforced concrete) drain pipe, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S&F ultra plus PE, DWC (Double Wall corrugated ) pipes confirming IS-16098 Part-2 : 2013 pertaining structured wall plastics pining system for Non - pressure drainage and sewerage 150 mm bore pipe and fittings with non smooth surface, type B complete all as specified and directed.

M&L for concrete bed for 150 mm bore pipe in PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) to drain pipes including packing under, haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories, complete all as specified and directed.

M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls excluding clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified and directed.

Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed.

M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints, laid in trenches or in floors or wall complete all as specified & directed.

M&L PVC (SWR) bend any radius 110mm dia

M&L PVC (SWR) bend any radius 75mm dia

M&L PVC(SWR) Tee any radius 110mm dia

M&L PVC(SWR) Vent cowl 110mm dia

S&F 110mm dia Branch piece, single (equal or unequal), ordinary or inverted, spigot or socket type or with parallel branches complete all as specified and directed.

Demolition of old decayed / damaged brick work in cement or cement lime mortar and in any condition including removal of same complete all as specified and directed.

M&L for brick work with sub class "B" bricks straight or curved on plan exceeding 6 mtr mean radius and built in CM (1:4) complete all as specified and directed.

M&L brick work using sub class B brick curved or straight on plan to any radius in half brick wall builit in CM (1:4) complete all as specified and directed

Use and waist form work to soffits of suspended slabs such as roof slabs, floor slabs n'exc 200mm thick in rough finished surfaces etc, complete all as specified and directed.

M&L for RCC (1:1.5:3) type A-1 using 20mm graded stone aggregate as in slabs supported on walls beams and columns etc complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in precast manhole / septic tanks covers including necessary form work and setting in CM (1:4) complete all as specified and directed.

M&L for mild steel deformed bars 6-8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on any faces brick work including finishing the surface fair and smooth without using extra cement complete all as specified and directed.

M&L for providing PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in coping of manholes and similar work complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation bed of manhole, mass concrete etc complete all as specified and directed.

M&L for PCC (1:2:4) type B-2(using 40 mm graded stone aggregate) as in channels benching of manhole, laid to shape and slope, including necessary form work etc complete all as specified and directed.

Cutting into exisiting manholes 150mm dia for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished and reforming benching as required complete all as specified and directed.

M&L for brick work with sub class 'B' bricks in one brick thick honey com walling built in CM (1:4) complete all as specified and directed.

M&L for Filling of brick bats in soak well laid dry complete all as specified and directed.

Supply only integral water proofing compound, complete all as specified and directed.

M&L for Preparation of newly plastered surface of walls,and applying two coats of cement base paint over a coat of primer to external surfaces of walls complete all as specified and directed.

S&F Mild steel work as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars for doors, balusters, nosing to steps including embeding in concrete and screws etc wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron filets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cms in width or girth not otherwise described and apply two coat of synthetic enameled paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Supplied and fixed in repair galvanized 2 strands steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standared rails straining bolts including securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc complete all as specified and directed. (each line wire to be measured)

M/S GYANITECH ENTERPRISES

M/S SAI UDYOG

ashiyana electrical company

M/S CITY ENTERPRISES

M/s Mukesh and company

BHARAT ELECTRICAL & ELECTRICAL WORKS