Construction of RCC storage tank for buffer storage to counter draught at Village Sundli in GP Jai Pidi Mata in Tehsil Jubbal Distt Shimla HP SH Construction of RCC S/tank of 80000 ltrs cap at village Sundli ground DC Deposit

Amount

Excavation in foundations , trenches etc., in earth work , lift up to 1.50 metres. Stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm. (fifteen centimetres) layers , when required in to plinth and sides of foundations etc., conslolidating each of the disposited layer by ramming and watering and then disposing off all excavated soil as directed with in the load of 20 mtrs. Pick and Jumper work etc. complete as per the direction of the Engineer - in - Charge.

Providing and laying cement concrete 1:4:8 (1cement: 4 sand: 8 graded stone aggregate 25mm (Forty millimeter nominal size) and curing complete excluding cost of form work in foundation and plinth with in all leads & lifts as per direction of Engineer - in charge.

Providing from work steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish i/c centering, shuttering, strutting and propping etc. with wooded battens & ballies, height of propping and centring below supporting floor to ceilling not exceeding 4 meters and removal of the same for in situ reinforced concrete and plain concrete work with in all leads aand lifts as per the direction of the Engineer in Charge.

Edge of slab and breaks in floors and wall under20cm wide within all leads and lifts.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttress, plinth and string couress and the like with in all leads aand lifts as per the direction of the Engineer in Charge.

Beams, cantilevers, Girders & lintels sides and siffits of beams, hounching cantilever girder not exceeding 1 mtr. Depth. With in all leads and lifts.

Arches exceeding 6 meters (Six meter) span as per the direction of Engineer in Charge.

Providing and laying cement concrete 1:1.5:3 (1cement :1.5 Sand: 3 graded stone aggregate 20 mm N/S) and curing complete excluding cost of form work and reinforcement for Rainforced concrete work in:-

Foundation and Plinth with in all leads and lifts as per the direction of the Engineer in Charge.

Walls (Any thickness) attached pillasters, pillasters, buttresses, beam girder and contilevers upto floor two level with in all leads and lifts as per the direction of the Engineer in Charge.

Suspended Floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever up to floor two level with in all leads and lifts as per the direction of the Engineer - in - Charge.

Providing mild steel/ tor steel reinfircement for rainforced concrete work I/C bending, binding and placing in position complete upto floor two level with in all leads and lifts as per the direction of the Engineer in Charge.

Providing and fixing MS Sheet Man hole cover with locking arrangement including lock, nuts & bolts & other fittings complete with in all leads & lifts as per the entire satisfaction & direction of the Engineer Incharge.

Laying, jointing and testing of G.I pipe line light grade for inlet/outlet pipe over flow pipe 50 mm dia with in all leads and lifts.

Providing and fixing of controlling arrangement with (50 mm dia) wheel valve including all type of tube fitting complete.

Steel work welded in built up sections, trusses and framed work including cutting, hoisting and fixing in position and applying a priming coat of red lead paint in gratings, framed guard, bars, ladders, railing, brackets and similar work complete in all respect as per direction of Engineer-in-Charge with in all leads and lifts.

Providing and fixing of 50 mm dia double flanged puddle coller for connection with RCC wall with in all leads and lifts.

Providing and fixing of mosquito proof ventilator 400mm dia 300mmm dia high as per the direction of Engineer in Charge.

Finishing wall with water proofing cement paint of approved brand and manufacture and of requried shade on decorated wall surfaces (two coats) to give an evenshade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials complete in all respect within all leads and lifts as per direction & to the entire satisfaction of Engineer-in-charge. .

M/s Pardeep Sublaik (BID ID -446103)