Renovation of Room No.-46 (Secretary Chamber, Department of Revenue, Registration and Land Reforms) at Ground Floor of Project Building at HEC, Dhurwa, Ranchi.

Amount

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead: For thickness of tiles 10 mm to 25 mm

Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking sown chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer?in-charge.

Providing designation 75 A brick work in C.M. (1: 6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x1 0x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with.

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Multipurpose cement board reinforced with suitable fibre cement screw. 8 mm thick cement fibre board, Type- B, Category- Ill as per IS: 14862 : 2000

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red : Area of slab upto 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of size Tile 600 x 1200 mm

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry@ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Two track two panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system, adjustable nylon rollers with SS 304 body. : Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (7 4 mm & above). (Height upto 2.5 metre).

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 10.30.2 5.5 mm thick glass panes

Ventilator Casement window single panel with or without fixed panel with S.S. 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zamak) powder coated handles.

Using R1 series with frame (33 mm & above ) x (35 mm & above) & sash /mullion (33 mm & above) x (50 mm & above). (Height upto 0.90 metre)

Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the

Providing and fixing panic bar/ latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.

Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete

Carriage of materials

Sand Lead (10 Km)

Bricks ( Lead 1K+7P)

Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 3m in depth but not exceeding 4.5 m. (Rate is over corresponding basic item for depth upto 1.5 metre)

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for

Foundations, footings, bases of columns, etc. for mass concrete

Columns, Pillars, Piers, Abutments, Posts and Struts

Weather shade, Chajjas, corbels etc., including edges

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL): providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.

8mm dia 35%

10mm dia 35%

12 mm dia 30%

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.)

Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kg/10 sqm to form film of 1- 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litre/10 sqm, complete as the direction of Engineer -in-Charge

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.

Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.

Water proofing for Old and New Roof Slab :- Providing and laying water proofing treatment on roof slab by applying two Component, factory designed, ready to use, acrylic modified flexible

Covering of treated surface with PCC :- Providing 50 mm thick Cement Concrete M20(1:1.5:3) maintaining slope in alternate 2 mt x 2 mt panels with aaproved quality of stone chips of 20 mm

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with Integral water proofing compound Liquid @125 ml per bag cement including screening, curing

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing, laying, testing & commissioning of IS 1239 marked black M.S pipe including all fittings i.e bend, elbows, tees, flanges, reducing socket, nuts and bolts, gaskets etc fixed with welded / screwed joints. including necessary excavation, backfilling, removal of surplus soil etc. min. 1 mtr deep excavation and wrapping with anticorrosive treatement with asphalt tape as per IS:10221, refilling the trench etc. OR fixed with screwed or welded joints, hanged with clamps, hanger supports, dash fasteners, bolts, nuts, rubber insertions etc including threading, cutting, welding, edge preparation, painting of approved colour over two coat of primer, cutting & making good the wall/ floor wherever required, complete as required or as directed by engineer incharge. Make:Tata/Nezone/Jindal

150 mm diameter

Carriage of materials

Sand Lead (8 Km)

Local sand 3Km

Chips 22Km

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc

20 mm nominal dia Pipe

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

75 mm diameter

110mm Dia

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

75 mm bend

110 mm bend

Point Wiring in PVC Conduit, with Modular type Switch: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required.

Group-C

Power Plug wiring in PVC Conduit (2X4 Sq.mm) :- Wiring for light/power plug with 2x4 Sq.mm FR PVC insulated copper conductor songle core cable in surface/recessed PVC conduit along with 1 No. 4 Sq.mm FR PVC insulated copper conductor single core cable for loop earthing etc. as required.

Circuit/Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.

2x1.5 Sqmm + 1x1.5 sqmm earth wire(for Single Separate 5A from nearest switch board )

2x2.5 Sqmm + 1x2.5 sqmm earth wire (for switch board circuit to LDB and UPS 6 A Sockets Circuit).

2x4.0 Sq.mm + 1x4.0 Sq.mm earth wire. (AC & GYZER)

2x6 Sqmm + 1x6 sqmm earth wire

4x6 Sqmm +2x6 sqmm earth wire.(to be used for all LDB)

S/F PVC Conduit: Supplying and fixing of following sizes of Rigid 2 mm thick PVC conduit alongwith the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required for TV and TEL out lets.

S/F Modular type Switch / Socket:- Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc as required. (to be used in switch board with sockets)

5/6 amps, one way modular switch

15/16 amps, one way modular Switch

5/6 amps, 3 pin modular socket

6/16 amps, 6 pin modular socket

S/F Modular type electronic fan regulator:- Supplying and fixing stepped (two module) type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required.

S/F light plug point with modular type accessories:- Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 5 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch, connection, painting etc as required.

S/F power plug point with modular type accessories:- Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular type switch, connection, painting etc as required.

S/F Ceiling Rose:- Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required.

ITC fluorescent fitting with down rods:- Installation, testing and commissioning of Pre-wired fluorescent fitting /compact fluorescent fitting /2x20W LED Tube light of all types, complete with all accessories and tube etc.directly on surace or ceiling/ wall, including connection with 1.5 Sq. mm. FR PVC insulated, copper conductor, single core cable and earthing including supplying and fixing ball & socket arrangement, 2 No. down roads of 20 mm dia x 1.6 mm thick steel conduit (up to 30 cm lenght), painting & wiring the down rods with 1.5 sq.mm. PVC Cu. conductor sinlge core cable and earthing etc. as required.

S/F Extra Down Rod:- Providing and fixing extra conduit down rod of 20 mm dia, 2x10 cm, length with 2x1.5 Sq.mm FR PVC insulated copper conductor, single core cable including painting etc. as required. (Note more than 5 Cm. length shall be rounded to the nearest 1) (Extra Down Rod For Ceiling Fan)

ITC Exhaust Fan upto 450 mm sweep:- installation of exhaust fan upto 450 mm sweep in the existing opening, including making the hole to cut the size of the above fan, making good the damage, including connection, testing, commissioning etc as required.

S/F 'C' series MCB:- Supplying and fixing 240/415 V, 10 kA, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required.

6/32A Single Pole

50/63A TPN (To use as incommer for all TPN D.B.)

Supply of 1400 mm (56") BLDC 5 STAR 32W CEILLING FAN

4 way (8 + 12), Double door, Vertical type

Supply of 230 mm (9") Exhaust fan (Metal body) suitable for single phase 230 volts, 50 Hz., AC supply complete with motor, louvers/shutters etc. complete as required. Make- Havells / Usha / Crompton/ (METAL BODY)

Supply, fitting, fixing & testing of 15W LED recessed Downlighter with cutout dia 145 mm suitable of Armstrong /CRG/TRAC/USG/Celotex/ POP Muduler Celling . Must be white Power doatedpreseure die cast aluminum housing for superior heat management and beautifully designed with white modled in engineering plastic Make :- .Trilux/ Lighting Technology/Philips.

S/F Modular Computer board cosisting switch & socket in 6 modular board etc as per required

1.24.3 15/ 16 amps, one way switch 2 X102=204 1.24.5 15/16 amps, 6 pin socket outlet 2 X 145=145 1.27.3 6 module box 1X240=240

copper tube of size 1/4" for split ac unit 1/1.5/2/3 tr capacity including nitride rubber insulation

copper tube of size 1/2" for split ac unit 1/1.5/2/3 tr capacity including nitride rubber insulation

drain pipe for AC

4 core 4sqmm Copper cable

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).

Lawn area

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) Screened through sieve of I.S. designation 20 mm

Rough dressing the trenched ground including breaking clods

Fine dressing of the ground

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge

Qty vide item no

Providing & Fixing Chaukhats Panneling with wooden framed by 12mm thick both side best quality Ply and 1mm thick water proof laminate pasting, finishing with all materials and labour all complete as per buildings specification and direction of E/I.

Providing and fixing 30mm Flush door of ply wood Green or ISI mark water proof ply grade and pasting with 1mm Laminate make at both side with all material and labour all complete (including all fancy type fitting) as per building specification and direction of E/I.

Supplying fitting fixing all height wall paneling with 12mm ply wood over 50mm x 25mm aluminum section 24mm WPC WALL Lovers with all taxes and royalty all complete as per E/I

Providing & Fixing Panneling with wooden framed by 12mm thick both side best quality Ply and 1mm Laminate of green Decor pasting , finishing with all materials and labour all complete as per buildings specification and .

Supplying fitting and Fixing Conference Table: Size: 2400 x 1200 x 750 MDF and particle board finished with melamineSpecial characters All with pest control, chemical treatment of corrosion, high strength, good rigidity, no deformation, reasonable proportion.Material: scratch-resistant melamine wood makes cleaning and cleaning products easier (Make Featherlite)

Supplying fitting and Fixing A2199H High Back Chair with * Multilock Mechanism , Gaslift & * Two Way Adjustable Arms (Height & Swivel) * Chrome Base - * Leatherette Seat & Back (Make Featherlite)

Supplying fitting and Fixing A2199M Medium Back Chair with * Multilock Mechanism , Gaslift & * Two Way Adjustable Arms (Height & Swivel) * Chrome Base - * Leatherette Seat & Back (Make Featherlite)

Supplying fitting and Fixing A2199V Visitors Chair Leatherette Upholstered Cushion Seat & Back Chrome Plated Sledge Base Fixed Arms (Make Featherlite)

Supply Fitting & Fixing File Cabinet Table wooden finish with Italian Top as per building specification and direction of E/I.

Supply Fitting & Fixing File Cabinet wooden finish with melamine polish as per building specification and direction of E/I.

Supply, fitting, fixing 1.5Tr. Cassette air conditioner make -LG

Supply, fitting, fixing 65inch OLED make -LG

Supplying fitting and fixing UniversalCloser (suitable for both anti-clockwise and clockwise doorswithout any change in the parts ofcloser)

Supplying fitting and fixing Sun screen Roller Blind

Supplying fitting and Fixing Wallpaper do - do

Supplying fitting and Fixing 3 Seater Sofa WithFabric Cover

Supplying fitting and Fixing 2 Seater Sofa With Fabric Cover

Supplying fitting and Fixing 2 Seater Sofa With Fabric Cover wooden Finish

Supplying fitting and Fixing 2 Seater Sofa Set Teak Wood

Supplying fitting and Fixing 2 Seater Sofa With Fabric Cover Wooden Finish (1+1)

Supplying fitting and Fixing Rectangular CENTRE TABLE with Marble Top of 1219mmX711mm

Supplying fitting and Fixing Oval CENTRE TABLE with Other wood Top of 965mmX457mm

Supplying fitting and Fixing Single storage SideTable, H 650 mm mm X D 500 mm

Supplying fitting and Fixing Stainless Steel Dust Bin 2Bin Mounted with 3 Pole capacity50

Supplying fitting and Fixing door mats

Supplying fitting and Fixing Round Glass Flower Pots Or Plant

Supplying fitting and Fixing Metal Dial And Hands WallClocks

Providing and fixing washdown water closet( EWC) make it jaquar P trap pattern 3 with Cat no DRS-WHT-37953BIUFSM and product id 5116877-59437028766

Providing and fixing SWUTCHGERS push Buttom type flushing Cistern dual flushing system 10 LTR MAKE IT ADHUNIK WITH CAT NO (ASG-GOLD-DFC10L) and product id 5116877-49492748952

Providing and fixing two way valve chrome plated alloy steel 15 15 15 make it PRODE with cat no (CP Bib cock 2in 1) and Productid 5116877-46224966212

providing and fixing Bathroom hand showertLeaded brass grade DCB-2 of IS 1264/1997 make it PRIDE with cat no (CP health faucet) and product id 5116877-8222644844

Providing and fixing liquid soap dispenser, capacity 100 Mililiter make it PRIDE with cat no (Liquid soap dispenser with glassholder bottle) and product id 5116877-197799589

Providing and fixing Viterous china sinks/wash basin flat back and rectangule make it Jquar with cat no ( DRS-WHT-37601) AND PRODUCT ID 5116877-95681183220

Providing and fixing waste fittings for size 32 ,, for washbasin make it vijay with cat no (BRASS WASHBASIN COUPLING) AND PRODUCT ID 5116877-98475055076

Providing and fixing 15mm Leader tin Bronze fancy tap make it CAVIER with cat no(SO 04-205 CAVIER SINGLE LEVER 6") AND PRODUCT ID 5116877-56740054860

Providing and fixing 15mm Brass stop valve make it SHAKTI with cat no (C.P ANGLE COCK HW-8206) AND PRODUCT ID 5116877-7482652122

Providing and fixing SWITCHGERS 450 mm connection pipe with Nuts make it ADHUNIK with cat no (ACPN450) AND 5116877-9290703887

Providing and fixing Towel Rail cast brassLCB-2 OF IS:292/1983 for Towel ring make it PROIME with cat no ( CP TOWEL RING) and product id 5116877-20934319528

Providing and fixing Soap dish- caase stainless steel make it PRAYAG with cat no (PRAYAG SOAP DISH) AND PRODUCT ID 5116877-852887194484

Providing and fixing 25 liter 4star water heater make BAJAJ with cat no (BAJAJ 25LT CALENTA-M S STAR GEYSER) and product id 5116877-99621432880

Supplying fitting & fixing Wall Mount only Projector Stand

Supplying fitting & fixing Pro Projector Screen 80 Inches

Supplying fitting & fixing Short Throw (0.41 to 0.9)Multimedia Projector (MMP) With1920 x 1080 (Full HD)

Providing fitting and fixing Outdoor/Indoor Fountain, do-do

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

l n enterprises