MISC REPAIR WORKS SUCH AS DRAINS, COMPOUND WALL,FENCING,PATH,HARD STRANDING ETC IN THE AREA OF AGE BR-II UNDER GE SAUGOR

Amount

Demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specifie and directed

Demolition of RCC in precast cover slab any thicknes (reinforced) complete all as specifie and directed

Demolition of cement concrete in ground floors and pavings n exc 15cm below or above ground floor complete all as specifie and directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete all as specifie and directed

Excavation over areas not exc 1.5 m deep and getting out soft/loose soil complete all as specifie and directed

M&l for moorum/red bajri filling in floors or pavings laid in layers n.exc 15cm thick spread levelled and compacted with mechanical earth compactor including watering complete all as specifie and directed

Demolition of RCC of any description and in any position complete all as specifie and directed .

Excavation in trenches not exc 1.5 m wide not exc 1.5 m deep in soft/ loose soil for foundation etc or for shaft, wells, manholes etc n exc 10 Sqm on plan and getting out complete all as specified and directed.

Removing excavated soil not exceeding 50 m distance and depositing where directed at alevel n exc 1.5 metre above the starting point . complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil complete all as specifie and directed.

M&L for RCC design mix M25 (using 20 mm graded stone aggregates) as in foundations, including rafts, footings, foundation beams, plinth beams complete all as specifie and directed.

M&L for RCC design mix M25 (using 20 mm graded stone aggregates) as in columns, pillars, piers, posts and struts complete all as specifie and directed

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter Rough finished surfaces of concrete flat complete all as specifie and directed.

M&L for formwork to sides of pillars, posts, struts, piers,columns, and stanchions rough finished surfaces of concrete Square, rectangular or polygonal complete all as specifie and directed

M&L for cement concrete 1:4:8, type D 2 (using 40 mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for brickwork with subclass 'B' old size bricks, straright or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per Srl item No 16 above but but except bricks. Note:-Serviceable bricks obtained from Srl item No.01 above shall be re-used in this item

M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed.

M&L for mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specifie and directed

M&L for rendering 15mm thick cement plaster on wall in cement mortar 1:6 on brick wall / concrete surfaces of finishing the surfaces even and smooth without using extra cement complete all as specifie and directed

M&L for applying two coats exterior weather coat over one coat of exterior primer over newly plastered surfaces of walls ,chajjas complete all as specifie and directed . Make:- Asian or equivalent make as approved by GE

M&L for PCC 1:3:6, type C-2( using 40mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specifie and directed.

M&L for walling of random rubble, brought up to course well bounded bedded and solidly hearted built in CM(1:4) complete all as specifie and directed

All as per Srl item No 23 as above but but except stones Note:-Serviceable stones obtained from Srl item No.01 above shall be re-used in this item

M&L for PCC 1:3:6, type C1 (using 20mm graded stone aggregates) as in coping and the like including weathering , slightly rounded or chamfered angle with and incl necessary use and waste of form work complete all as specifie and directed.

M&L for rendering 15mm thick in CM (1:4) on random Rubble stone masonry complete all as specifie and directed.

M&L for PCC 1:2:4, type B1 (using 20mm graded stone aggregates) as in benching of drain complete all as specifie and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds, mitered /stopped ends etc complete all as specifie and directed.

Add or deduct for each 25mm girth or part there of over or under 30 cm. complete all as specifie and directed

M&L for precast RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregates) as in drain cover with plain fair faces including chambers, wathering, throating etc and setting in CM (1:4) complete all as specifie and directed

Dismantling of barbed wire of any thickness or size complete all as specifie and directed.

Dismantling posts or struts (wood,steel or RCC ) in natural ground any section ,including taking out embedded portion and making good disturbed ground complete all as specifie and directed

Excavating in post holes in soft / loose soil (or similar holes ) n.exc 0.5 cum getting out excavated soil and filling with P. C. C. for fixing of fencing post and removing surplus soil to a distance n.exc 50mtr and making good surface complete all as specifie and directed . Note :(P C C shall be measured and paid separetely

M&L for MS work as in posts/struts in fencing including cutting tops to shape as directed,drilling holes ,notching for wire etc flat iron fillets (for securing wire mesh/chain link fencing etc ) including all necessary drilling,bolting or riviting etc and similar work complete all as specifie and directed

Supply only mild steel screw bolts 10 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut n exc 5 cms long.

Supply only chain link fencing with 4mm dia GI wire, with 75x75mm mesh weight not less than 1.75 Kg per sqm fixed to fencing post of any type complete all as specified and directed. Make:- TATA/SAIL/JINDAL

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

M&L for mild steel round bar 10 mm and over as in tightening of chain link fencing including cutting to shape, necessary drilling, bolting etc Fe-410-W (Gde E-250) quality -A or Fe 290 (Gde-E-165) complete all as specicifed and directed. .

S&F in repairs galvanised, 2 strand , steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails staining bolts, incl securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins, etc complete all as specicifed and directed ( each line wire to be measured) Make :- TATA/SAIL/JINDAL..

M&L for PCC in embedding of chain link fencing, rounded or chamfered on edges type B1 (1:2:4) (using 20 mm graded stone aggregates) including necessary formwork complete all as specifed and directed.

M&L for painting with two coats of synthetic enamel paint over a coat of red oxide primer incl preparation of new steel surfaces over 10 cm width or girth complete all as specifed and directed

M&L for painting with two coats of synthetic enamel paint over a coat of red oxide primer incl preparation of new steel surfaces not exc 10 cm width or girth, incl preparation of new steel surfaces complete all as specifed and directed

M&L for 75mm thick PCC 1:3:6, type C2 (using 20mm graded stone aggregates) incl finished even and smooth without using extra cement as in plinth protection incl necessary form work to edges and joints to be filled with bituminous sealing compound complete all as specifed and directed

M&L for machine pressed precast cement concrete coloured chemically treated interlocking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid over and including 40mm thick uniformly levelled surface of stone dust cushioning complete all as specifed and directed

Ms Prakash Raikwar Traders Co.

maharaja construction and suppliers