supply installation testing and commissioning of fire fighting system for residential flats

Amount

FIRE PUMP ROOM EQUIPMENTS Supplying, Installation,Commissioning of electric driven pressurisation pump (jockey) suitable for automatic operation and consisting of following : complete in all respect as required. Horizontal type ,centrifugal pump with stainless steel shaft flow of 450 lpm at suitable head confriming to is1520, 5 HP SQ cage induction motor, TEFC type, 3 Phase 50 Hz. AC with IP 55 class of Protection for enclosure, horizontal foot mounted type with Class -'F' insulation, conforming to IS:325.and suitable anti vibration pads.

FIRE PUMP ROOM EQUIPMENTS Supplying, Installation,Commissioning of electric driven pressurisation pump (jockey) suitable for automatic operation and consisting of following : complete in all respect as required. Horizontal type ,centrifugal pump with stainless steel shaft flow of 900 lpm at suitable head confriming to is1520 7.5 HP SQ cage induction motor, TEFC type, 3 Phase 50 Hz. AC with IP 55 class of Protection for enclosure, horizontal foot mounted type with Class -'F' insulation, conforming to IS:325.and suitable anti vibration pads.

CONTROL PANEL FOR FIRE PUMPS Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 ement:5coarse sand : 10 graded stone aggregate 40mm nominal size Fabrication Installing and commissioning of compartmentalised common starter for above Electrical motor driven pumps.(Note : Cost shall include necessary interlocking, control wiring etc. ) Block 1.4&5

CONTROL PANEL FOR FIRE PUMPS Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 ement:5coarse sand : 10 graded stone aggregate 40mm nominal size Fabrication Installing and commissioning of compartmentalised common starter for above Electrical motor driven pumps.(Note : Cost shall include necessary interlocking, control wiring etc. ) Block 2&3

Supplying and laying of FRLS, PVC outer sheath, steel armoured, as bolow mention conductor, 1100v grade power cables with glands etc.The cables shall be laid in cable tray on walls/ floor etc. as required.The the rate shall include any cable trays if necessary for the same.The minimum size of the cables shall as mentioned below, 4 C x 16 Sqmm. Jockey pumps (Copper Condctor)

Pressure indication system Providing and fixing pressure switch in MS pipe line (pressure range 0 - 10 kg / sq.cm) suitable for 12 volts / 24 volts DC including connection as required.

Pressure indication system Pressure gauge (0-10Kg/Cm2) at terreace level pump with Q type bend

Hose reel drum system Supplying, laying, testing and commissioning of Class 'C' heavy duty MS Pipes conforming to IS 1239 and 3589 including fittings like elbows, flanges, tapers nuts, bolts, (galvanised), gaskets etc. 32mm nominal dia

Hose reel drum system Supplying, laying, testing and commissioning of Class 'C' heavy duty MS Pipes conforming to IS 1239 and 3589 including fittings like elbows, flanges, tapers nuts, bolts, (galvanised), gaskets etc. 50mm nominal dia

Hose reel drum system Supplying, laying, testing and commissioning of Class 'C' heavy duty MS Pipes conforming to IS 1239 and 3589 including fittings like elbows, flanges, tapers nuts, bolts, (galvanised), gaskets etc.65mm nominal dia

Hose reel drum system Supplying, laying, testing and commissioning of Class 'C' heavy duty MS Pipes conforming to IS 1239 and 3589 including fittings like elbows, flanges, tapers nuts, bolts, (galvanised), gaskets etc. 80mm nominal dia

Hose reel drum system Painting the exposed MS pipes with one coat of Etching primer and with two coats of synthetic enamel paint of approved colour / shade. 32mm nominal dia

Hose reel drum system Painting the exposed MS pipes with one coat of Etching primer and with two coats of synthetic enamel paint of approved colour / shade. 50mm nominal dia

Hose reel drum system Painting the exposed MS pipes with one coat of Etching primer and with two coats of synthetic enamel paint of approved colour / shade. 65mm nominal dia

Hose reel drum system Painting the exposed MS pipes with one coat of Etching primer and with two coats of synthetic enamel paint of approved colour / shade. 80mm nominal dia

Supplying, fixing, testing and commissioning of Butterfly valve PN 16 with Bronze / Gunmetal seat duly ISI marked complete with nuts, bolts,washers, gaskets and flanges conforming to IS 13095, of following sizes all complete as required. 80mm nominal dia

Supplying, fixing, testing and commissioning of Non-return valve PN-16 as per IS:5312 with required flanges, nuts, GI bolts and gaskets etc. all complete as required of the following sizes . 80mm nominal dia

Supplying, installing, testing and commissioning of Gun metal Ball valves 25mm nominal dia

Supplying and fixing First - Aid Hose Reel drum with MS construction spray painted in post office Red, conforming to IS 884 complete with the following as required 30m long 20 mm (nominal internal) dia water hose Rubber braided hose Type -2 as per IS: 12585.

Supplying, fixing, testing and commissioning of fire brigade inlet inlet connection of 2 way conforming to IS 904 with 2 nos.63 mm dia. built - in Gun metal Non- return valves

Extra civil work core cutting 80mm nominal dia

Radakirouchenane. V

Ponmani International (India) Pvt Ltd