SPECIAL REPAIR TO WATER PROOFING TREATMENT FOR CERTAIN BUILDINGS AT AKASH VIHAR AND VISHWA VIHAR CAMP OF ASTE SPECIAL REPAIRS REPLACEMENT OF BATH ROOM AND TOILET DOORS IN CERTAIN SMQ AT AV CAMP MAP QTRS AND SERVANT QUARTER OF VISHWA VIHAR CAMP

Amount

Taking down chowkhats or frames with shutters not exc. 1.5 sq. m Each (without taking off shutters from the frames) complete all as specified and as directed.

Taking down Shutters of any description exceeding 1 Sq.m and n exc 2 Sq. m Each complete all as specified and as directed.

Taking down chowkats of frames with shutter exceeding 1.50 sqm and not exceeding 4 sqm each of any description any type complete all as specified and as direced.

Supply and fixing 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides , Factory made complete all as specified with powder coating complete all as specified and as direced.

Supply and fixing Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube in openings complete all as specified and as direced.

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as direced.

Supply and fixing 125 mm long butt hinges, medium weight cold rold mild steel and fixed complete all as specified and as directed.

Supply and fixing 75 mm long butt hinges, extruded aluminium alloy with galvanised aluminium hinge pin, anodised, type B 21 complete all as specified and as direced.

Material and labour for painting to old steel surfaces with two coats of synthetic enamel paint including preparation complete all as specified and as directed.

Supply and fixing 100 mm long aluminium, anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fixing 150 mm long aluminium, anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fixing 100mm long extruded alluminium alloy handle , cast type , anodized complete all as specified and as directed.

Supply and fixing 150mm long extruded alluminium alloy handl, cast type , anodized complete all as specified and as directed.

Supply and fixing 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

S&F for pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar for inserting hold fasts & making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B-1, depth of embedded portion of hold fasts or lugs measured from the face of the jamb into the wall exc half brick but n.exc one brick complete all as specified and as directed.

S & F 25 x 5 mm flat iron as in hold fast for fix wooden door frame complete all as specified and as directed.

M&L for plain cement concrete type B0 1:2:4 (using 12.5 mm graded granite stone agg) cast in situ for filling the pressed steel frames complete all as specified and as directed.

M&L for two coats of synthetic enamel paints over primary coat on wood or wood based material over 10cm width or girth , not otherwise described , including preperation of new surfaces complete all as specified and as directed.

Material and labour for preparing surfaces of steel and iron surfaces, new or previously untreated surfaces, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

M & L for rendering 10mm thick cement plaster in cm 1:6 on fair faces brick or concrete surfaces of wall including finished even and smooth without using extra cement complete all as specified and as directed.

M&L for plastering 10 mm thick on fair faces of brick work or concrete surfaces for backing of Dado/skirting’s tiles/jambs by using CM 1:4, complete all as specified and as directed.

M&L 15 mm thick rendering by using CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth for jambs & wall, including taking down complete all as specified and directed.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed.

S & F in repairs 15mm bore Pillar taps, cast copper alloy, capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repairs bip taps 15mm chromium plated cast copper alloy with crutch or butterfly handle, screw down for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repairs stop valves 15mm , cast copper alloys, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions complete all as specified and as directed.

All as per item No 29 above, but , fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and as directed.

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F in repairs , Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

M & L PVC floor trap with grating including jointing with solvent cement, 75 mm dia outlet complete all as specified and as directed.

Taking up or down steel tubing and connections, 15mm bore complete all as specified and as directed.

Taking up or down steel tubing and connections, 20mm bore complete all as specified and as directed.

Taking up or down 25 mm dia bore steel tubing and connections including cleaning for refixing or removal to store all as specified and directed complete all as specified and as direced.

Taking up or down 20 mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as direced.

S&F 25mm outer dia bore CPVC pipes SDR 11& plain CPVC SDR 11 fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

All as per item no. 39 above, but, fixing only complete all as specified and directed.

M&L for 20 mm outer dia bore CPVC pipes SDR 11& plain CPVC SDR 11 fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

All as item 41 above, but , fixing only complete all as specified and directed.

S & F for 16 mm dia bore CPVC pipes SDR 11 & plain CPVC SDR11 fittings on walls and ceiling or laying in floors, with all fittings complete all as specified.

S & F for 20 mm dia bore CPVC pipes SDR 11 & plain CPVC SDR11 fittings on walls and ceiling or laying in floors, with all fittings complete all as specified and as directed.

S & F in repairs CP tubular towel rail, 20mm dia, D type, 60cm long between flanges aluminium anodised complete all as specified and as directed.

S & F Towel ring of CP fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 90 grams) etc complete all as specified and as directed.

S & F in repairs Liquid soap container of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 105gms complete all as specified and as directed.

S & F in repairs Soap dish, CP , approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F in reairs toilet paper holder of CP box type fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

S & F in repairs butt hinges 125mm size extruded aluminium alloy with galvanised mild steel hinge pin,anodised,all as specified complete all as specified and as directed.

S & F Aluminium anodised bolts barrel tower bolts 200 mm long of extruded section complete all as specified and as directed.

S & F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

M & L for Non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors in neat cement slurry and pointed in white or coloured cement to match complete all as apecidied and as directed.

Material and labour for glazed ceramic tiles Glazed ceramic tiles of size 350x 250x 7 mm / 450X 350X 7mm thick set and jointed in vertical surface with neat cement slurry and pointed in white or colour cement to match as in dados/skirting complete all as specified and as directed.

M &L for 20mm thick Granite (of any type) machine cut, in skirting / dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

M & L for screed bed for bedding layer of mortar 15 mm thick for laying floor finishes in cm 1:6 complete all as specified and as directed.

M & L for rendering 10 mm thick in cement mortaor 1:3 on fair faces of brick work or concrete surfaces complete all as specified and as directed.

Supply and fix in repairs vitreous china wash down water closet pan (Pedestal pattern) white, (excluding fixing bolts, flushing cistern and pipe) including taking down complete all as specified and as directed.

Supply and fix in repairs plastic water closet seat cover any approved colour, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and as directed.

S & F in repairs PVC valveless, syphonic action type flushing cistern 10 ltr capacity low level white with inlet ballvalve float and handle including brackets and flush pipe of polyethylene of density of PVC 32 mm for low level cistern etc complete all as specified and directed.

S&F in repair wash hand basin of size 550 x 400 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc complete all as specified and directed.

S&F in repairs PVC Connection 15mm size with PTMT Nuts of length 600 mm complete all as specified and as directed.

Supply and Fixing in repairs health faucets Chromium plated (hand shower) with 8mm dia 1.50m long flexible hose, wall hook fixed with brass screws and all accessories complete all as specified and directed.

M&L for precast cement concrete jallies 50mm thick type B0 1:2:4 (12.5 mm grade aggregate) including all mouldings and setting in cement motar 1:4 complete all as specified and as direced.

M & L for reinforced cement concrete type B1 1:2:4 (20 mm graded aggregate) for beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as direced.

M&L for mild steel TMT bars 10mm dia and overs, cut to length, bent to shape required, including cranking, bending spirally for hooping, columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as direced.

M&L for form work to sides and soffits of floor or roof beams for flat and fair finished surface complete all as specified and as direced.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces using CM 1:4 with finished even and smooth without using extra cement complete all as specified and as direced.

M&L for preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as direced.

M&L for preparation of new untreated steel surfaces of any description over 10cm in width or girth, not otherwise described and applying two coats of Synthetic enamel paint over a coat of red oxide as primer complete all as specified and as direced.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces by using CM 1:3 complete all as specified and as direced.

S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering , doors etc. to be prepared for hanging or sliding with necessary railing, wheel and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging ; also fastening and fixing complete ornomantal type as per approved design complete all as specified and as direced.

Demolition of cement concrete (unreinforced) in roofs,floors (other than ground floors), beams, staircase, landing,chajjas and similar suspended work complete all as specified and as direced.

Disconnecting existing water storage tank capacity exceeding 250 litre but not exceeding 500 litre setting aside or lowering if required including cleaning ,removing all scale and dirt etc from tank and hoisting and reconnecting and again refixing in position complete all as specified and as direced.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as direced

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as direced

M&L for brick work with sub class B brick straight or curved on plan exc 6 M mean radius built in cment mortar 1:6 complete all as specified and as direced.

Material and Labour for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in coping, mud stops, benching, water tank platform etc.on roof, chajja weathering, slightly rounded or chamfered angles and throating etc. including necessary form work complete all as specified and as direced.

Taking down cement or cement lime plaster on brick or stone wall etc. including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15 mm thick on brick work or concrete surfaces in two layers of first 10 mm thick in CM 1:6 and 5mm thick by using CM 1:4 with WPC rendering is to be finished even and smooth without using extra cement complete all as specified and directed.

M&L for two coat of cement based paint on undecorated wall surfaces including priming plastered surfaces with alkali resistant priming paint including preparation of surfaces complete all as specified and directed.

Material and Labour for cutting grooves or chases , pinning in brickwork and making good to facing where required and pointing in CM (1:3) for tucking in edges of felt etc girth of chasing not exceeding 10cm complete all as specified and directed.

Material and Labour for cutting out cracks to V section in existing roof or terrace or 30 mm wide grooves in brickwall, cleaning out and filling with crack fillar as per manufacturer's instructions ( Roof crackfill of Pidilite Industries Ltd or equivalent approved by GE) complete all as specified and as directed.

Material and Labour for PCC (1:2:4) type B0 using 12.5 mm graded stone agg as in padding over roof for filling depression and making proper slope complete all as specified and as directed.

Material and Labour for 10 mm thick rendering on roof surface in CM (1:3) surface finished fair and even using WPC @ 2% by weight of cement complete all as specified and directed.

M&L for water proofing treatment on horizontal or vertical surfaces with 3mm thick APP modified water proofing membrane weighing not less than 3.6 kg /Sqm, reinforced with non woven polyster matt weighting not less than 160 gms/ Sqm with following provisions complete all as specified and directed in accordance with manufacturers instruction:- a) Applying one coat of bituminous primer, polymerised primer oil based coat, evenly @.30Kg/sqm as priming coat to the prepared surface, till the surfce is properly impregnated and the solvent oil in the based primer is evaporated completely.

M&L for applying two coat of bituminous base aluminium paint over APP membrane @ 100 gram/Sqm complete all as specified and directed.

Supply only integral water proofing compound.

S&F 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball complete all as specified and directed.

M&L for 25 mm dia Gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for 20 mm dia Gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking down old PVC rain water pipe of any dia fixed in walls including all bends,couplers, junction etc and removal from site all as specified complete all as specified and directed.

S&F for PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls (For multi storey building-5 storey) complete all as specified and directed.

S&F for PVC (SWR) bends of 110 m radius with acces door complete all as specified and directed.

S&F for PVC (SWR) 110 m dia branch pipe double (Double Y ) equal or unequal with acces door complete all as specified and directed.

S&F for PVC (SWR) junction single (Single T) of 110 m radius equal or un equal with acces door complete all as specified and directed.

S&F water tanks 500ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted abd fixed in position complete all as specified and directed.

M & L for point wiring with 1.5 sqmm nominal cross sectional area, single core, ,1100 volts grade, stranded PVC insulated , unsheathed copper conductor cable in and including PVC cassing capping complete with and including all accessories/fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including two coats of white /colur washing/distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area ,single core, PVC insulated copper conductor cable. Unsheathed and connected to common earth and earth dolly complete all as specified and directed by Engr-in-charge for one light point/Fanpoint/5 Amp socket independent board controlled by one, one way switch complete all as specified and directed.

S&F for switch paino flush type ,05/06 Amps single pole, one way 240 volts in replacement of old u/s complete all as specified and as directed.

Supply and fixing ceiling roses surface type PVC/ polycarbonate isolated body with three terminals complete all as specified and as directed.

Material and labour for making circular opening by cutting brick wall 40cmx40cm thickness 23cm complete with inserting hume pipe collar of internal dia 300mm & length 23cm and filling all around (between wall and outer dia of hume pipe collar) with PCC (1:2:4) type B-0 ,12.5mm graded aggregate and grouting 04 nos bolts of size not less than 10mm dia and 100 mm long with nut & washer and making good to disturbed surface complete all as specified and as directed.

Supply and Fixing exhaust fan 300mm sweep, metalic body (Heay Duty), Single phase, 900rpm, including fixing arrangement with suitable lovers complete as specified. Make Havell’s (Turbo Force) or equivalent in Crompton Greaves/Bajaj complete all as specified and directed.

PRAGATHI BUILDERS

Siddivinayaka Constructions