CRC-WGTRD-125- G.G. Road

Amount

Labour for Removal of Landslide soil / Mud etc. deposited on the road surface and side berms by truck carriage within a distance of 5.00 Km after dressing, cleaning the road surface and dumping the silt etc. for disposal from the road surface including loading and unloading both end with necessary sweeping etc. completed as directed

Construction of granular sub base by providing coarse graded materials, spreading in uruiorrn layers With motor grader on prepared surface, mixing by mix in place tnethod with rotavator, contplete as per cl an jnltjal lead of 5 km). Foc Grading - II materials

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and broorning, stone screening to fill-up the interstices Of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor, Including cost of testing of materials at site and laboratory as directed by the deptt.)

Bituminous Cold Mix ( Including Gravel Emulsion)with cold mix Binder(Tailor made as per IRC:SP:100-2014. (Providing, laying and rolling of bituminous cold mix on prepared base consisting of a mixture of unheated mineral aggregate and emulsified bitumen( CSS-1/ CSS-1h), including mixing in a plant of suitable type and capacity, transporting, laying, compacting and finishing to specified grades and levels.(including carriage of mixed materials up to 10.0 Km initial lead from mixing plant )( Including cost of testing of materials at site and laboratory as directed by the deptt.)

Providing and laying Interlocking Concrete Block Pavement (ICBP) conforming to IS:15658-2006 including all lead and lift complete as per technical specification and as directed 80mm thick interlocking precast blocks having compressive strength of 40N/sq.mm

Manhole Slab (1000mm x 450mm): Supplying, fitting and placing TMT ( Fe-500) D ) relnforcement bor ( other ISI approved TMT reinforcement bor or equivalent ) In substructure complete as and technical specificatJons cl., 1010 and 1202 .

Plain/ reinforced cement correte, in sub structure complete as drawing and technkolsrcficotjon clauses A) WRh crushed stone RCC Gr. M20 height upto

Providing weep holes in Brick masonry/Plain/ReInforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of IV :20H towards drawing force. Complete as per drawing and Technical speclficatlon.

Labour for fitting and fixing the pre cast slabs at footpath including carriage considering 20 nos of slab per day by 1 no skilled and 5 nos unskilled (Mason 1st Class)

Labour for fitting and fixing the pre cast slabs at footpath including carriage considering 20 nos of slab per day by 1 no skilled and 5 nos unskilled (Semi Skilled labour)

Repairing of Footpath with Drain: Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material,disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 metres) Cement Concrete Grade M-15 & M-20

Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material,disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 metres) Rubble Stone Masonry in Cement Mortar

Reinforcement in Super Structure: Supplying, fitting and placing TMT conforming to IS:1786 Fe 500 D reinforcement in super-structure including TMT-IS 1786 ( Fe-500 D) Primary Producer (TATA/ SAIL/ Esser Steel/ Jindal Panther steel/ Shyam steel or equivalent) splicing complete as per drawing and technical specifications cl 1002, 1010 and 1202

Plain/Reinforced cement concrete, in sub & structure complete as per drawing and technical specification and steel shuttering formwork E. RCC Grade M20 (a) Height upto 5m.

Providing weep holes in Brick masonry/Plain/ReInforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of IV :20H towards drawing force. Complete as per drawing and Technical speclficatlon.

Finishing walls with Acrylic Smooth exterior painl of required shade (13.48.1 new work (Two or more coat applied @ 21 67 ltr/ 10 over priming applied) (asian paint made Apex Ultima protek ouralife paint)

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied lass beads as per IRC:35 MoSrt&H s specifications

Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H's fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance.

Road Markers/Road Stud With Lens Reflector Providjng and fixtng of stud 100 x 100 mm die cast in alurruruum, resistant to corrosive effect of salt and grit, titted With lense reflectors, installed in concrete or asphaltic surface by drilling holes M) mm upto a depth of tnm and bedded in a suitable bituminous grout or epoxy mortar. all as per BS 873 (Part 4) 1973

Retro reflectorised Traffic sign: Providing and erecting of Retro-Reflectrorised cautionary, mandatory & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. (ii) 60cm equilateral traingle

Retro reflectorised Traffic sign: Providing and erecting of Retro-Reflectrorised cautionary, mandatory & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. (iv) 80cm x 60cm Rectangular

Painting Two Coats including Prime Coat with Epoxy Paint of approved brand on Concrete / Steel Surfaces after thorough cleaning surface to give an even shade as per drawing and technical specification. Cl. 1701

BIJOY PATHAK