Construction of Museum, Open Air Theatre and Auditorium in Dumka town under Dumka District.

Amount

EARTHWORK:Cutting of Trees along with its branches their removal away from work site and stacking the same as per specification and diecrion of E/I( Measurement of girth at height of one metre above the ground level) a) Girth above 0.5 m but upto 0.75 m

b) Girth above 0.75 m but upto 1.5 m

Earth work in stripping by hydraulic machinery in grade A&B type of soil including moorumsoil, soil mixed with kankar, pebbles, and boulders upto 300 mm size and disposal of the same along with all organic materials in country side beyond 0.5 km upto 1 km in all by tipper including construction and maintenance of haul road etc as per specification and direction of E/I.

Earth work in stripping by hydraulic machinery in grade A&B type of soil including moorumsoil, soil mixed with kankar, pebbles, and boulders upto 300 mm size and disposal of the same along with all organic materials in country side beyond 1 km upto 2 km in all by tipper including construction and maintenance of haul road etc as per specification and direction of E/I.

Earthwork in excavation in foundation trenches in ordinary soil (Wide classification of soil item - A) and disposal of excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing roots of trees shrubs all complete as per approved design and per building specification and direction of E/I..

Extra for earthwork in hard soil as per specification and direction of E/I (vide classificatioNosf soil item _B)

Filling in foundation trenches and plinth in layers Nost exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50M and lift of 1.5 M all complete as per building specification and direction of E/I (mode of measurement compacted volume).

Providing coarse clean sand in filling in foundation trenches or in plinth icluding ramming and watering in layers Nost exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume)

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.

Supplying chemical emulsion in sealed containers including delivery as specified. Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm Nosminal size) over 75mm bed of dry brick ballast 40mm Nosminal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm Nosminal size)

P.C.C . M-100 with Nominal mix of (1:3:6) in foundation with approved quality of jhama metal and down well graded and local river sand (washed and screened( - iii ------do----

Providing R.C.C. M - 200 with Nominal mix of (1:1.5:3) in Foundation with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l.

Providing R.C.C. M - 200 with Nominal mix of (1:1.5:3) in Plinth Beam of all type with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l.

Providing R.C.C. M - 200 with Nominal mix of (1:1.5:3) in Columns with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l.

Providing R.C.C. M - 200 with Nominal mix of (1:1.5:3) in Lintel with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l. in lintel

Providing R.C.C. M - 200 with Nominal mix of (1:1.5:3) in Beam with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l. in lintel

R.C.C. M - 200 with Nominal mix of (1:1.5:3) in stiftener for Drains with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l.

Providing R.C.C. M - 200 with Nominal mix of (1:1.5:3) in Stair case with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l. in lintel

Providing R.C.C. M - 200 with Nominal mix of (1:1.5:3) in Slab with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l. in lintel

Providing 50 mm precast RCC m-200 with Nosminal mix of (1:1.5:3) jali with approved quality

Providing Tor steel reinforcement of 8mm,10mm, 12mm & 16 mm. dia bars as per approved design and drawing excluding carriage of bars to work site, cutting, bending, and binding With annealed wire with cost of wire, removal of rust, placing the rods in position,all complete as per building speciftcation and direction of E/l. 8,10 mm

Providing Tor steel reinforcement of 20mm, 28mm & 32 mm. dia bars as per approved design and drawing excluding carriage of bars to work site, cutting, bending, and binding With annealed wire with cost of wire, removal of rust, placing the rods in position,all complete as per building speciftcation and direction of E/l. 12/ 16 mm, 20mm, 28mm & 32 mm

Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints. 200 mm wide.

Brick Work Providing designation 75 A brick work in C.M. (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing to 10 mm thick mortar joints, cost of screening materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 115mm thk reinforced designation 75 A brick work in C.M. (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing to 10 mm thick mortar joints, cost of screening materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to is 12894-1990 (9"x4.5"x3") in C.M. (1:6) in super stucture with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of EI

Providing 250 mm thick jali work in cm (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5, finished with deep ruled pointing in CM (1:3) with sand of FM 1.5 on entire surface including cost of finishing the holes, screening materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

Extra for brickwork for each consequtive floor above first floor including watering scaffolding all complete as per direction of E/I

Brick work with common burnt clay machine moulded modular bricks of class designation 12.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand). From ground level upto plinth level

Above plinth level upto floor V level

Brick work in plain arches in superstructure above plinth level and upto floor five level including centering and shuttering complete for span upto 6 metres with common burnt clay F.P.S. (Nosn modular) bricks of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand).

Brick work in gauged arches in superstructure above plinth level and upto floor five level in cement mortar 1:3 (1 cement : 3 coarse sand) including centering and shuttering complete, for span up to 6 meters with common burnt clay F.P.S. (Nosn modular) bricks of class designation 7.5

Extra for additional cost of centering for arches exceeding 6m span including all shuttering, bolting, wedging and removal (Area of the soffit to be measured).

Tile brick masonry work 5 cm thick with common burnt clay F.P.S.(Nosn modular) tile bricks of class designation 10 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth and upto floor five level.

Extra for forming cavity 5 cm to 11.5 cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. ties 300 mm long of 25x 3 mm section at Nost less than 3 ties per sqm as per approved design

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) With F.P.S.(Nosn modular) bricks

With Modular bricks

STONE MASONRY WORKS Providing random rubble stone masonry in CM (1:6) in foundation and plinth with hammer dressed stone of less than 0.03 cum in volume and clean coarse sand of FM 2 to 2.5 including cost of screening , raking out joints to 20 mm depth, curing taxes and royalty all complete as per building specification and direction of E/I.

Providing Random rubble masonry in super structure

Providing rough dressed course stone masonry in Cement Mortar (1:6) in foundation and plinth

Providing rough dressed course stone masonry in Cement Mortar (1:6) in superstructure

Providing Ashlar stone masonry in CM 1:4 in superstructure

Providing Ashlar stone masonry in CM 1:6 in superstructure

FINISHING Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scafffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scafffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm thick water proofing cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening. curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scafffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm, cement lime plaster (1:2:4) (cement:lime putty:sand) with approved quality of lime and clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including screening. curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Extra for plaster work over exterior surface for each consecutive floor above first floor including cost of scaffolding etc. all cmplete as per direction of E/I.

Making 6x6mm grooves in plaster surface over walls truly horizontal or vertical as specified, at regular intervals, at all heights including cleaning, finishing, Scaffolding and curing with all leads and lifts of water all complete as per building specification and direction of E/I

Add for plaster drip course/ groove in plastered surface or moulding toR.C.C. projections.

Providing two coat of oil bound distemper of approved shade and make over a coat of cement prime over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I

Providing two coat of Plastic emulsion paint of approved shade and make over a coat of cement prime over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I

Providing one coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per specification and direction of E/I

Providing two coats of Synthetic enemel paint of approved shade and make over steel surface including cleaning the surface thorougly scaffolding and taxes all complete as per building specification and direction of E/I

Varnishing with varnish of approved brand and manufacture :Two or more coats glue sizing with spar varnish or an under coat of flatting varnish

Water proofing for Old and New Roof Slab :- Providing and laying water proofing treatment on roof slab by applying two Component, factory designed, ready to use , acrylic modified flexible material applied with brush, roller or spray for water proofing caoting as per manufacturer specifications

WATER PROOFING Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Water proofing treatment of Vertical joints (of external side and internal side) between door frame, window & ventilator frames (on all four sides) of outer wall over the Zycosil/ equivalent & Zycoprime/equivalent solution already applied (before the installation of door / window / ventilator frames in position) and fine finish with Grout RW/equivalent.

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm

For horizontal surface one coat @1.10 kg per sqm.

Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.

GRANITE WORK Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade.Granite stone of any colour and shade

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineerin- Charge :a). Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Extra for pre finished Nosing to treads of steps of marble stone.

Providing and fixing 18mm thick gang saw cut mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters ,window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm

Granite of any colour and shadeArea Area of slab upto 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, Nosn staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with Nosn staining weather sealant, so as to make the entire system fully water proof & dust proof.The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone - Exposed face machine cut and table rubbed with rough backing. 50 mm thick

White sand stone - Exposed face machine cut and table rubbed with rough backing. 50 mm thick

Gang saw cut stone 30mm thick White sand stone

Gang saw cut stone 30mm thick Red sand stone

Wall lining butch work upto 10m height with Dholpur stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width, including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases of size 75x75 mm and by providing layer of 75 mm thick strips i/c 12 mm thick bed of cement mortar 1:3 (1 Cement : 3 coarse sand) i/c ruled pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in-charge.

FLOORING and WALL TILING WORKSProviding and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : Second class deodar wood

Providing designation 75A brick on edge flooring in cement mortar (1:4) with top surface flush pointed in cement mortar (1:4) with quality of sand including th cost of curing, taxes, royalty all complete as per building specification and direction of E/I

Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layer 19mm thick (1:2:4) with 12mm to 6mm.size graded stone chips and top layer 6mm.thick (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty with all complete as per building specification and direction of E/I

40 mm thick marble chips flooring rubbed and polished to graNoslithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm Nosminal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1 mm to 4 mm Nosminal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume, including cement slurry etc. complete : Medium shade pigment with 50% white cement and 50% ordinary cement

Providing and laying 25mm. Thick kotah stone slab flooring of approved size, texture and colour over 19mm.thick base of lime morter (1:1:1) (lime putty:surkhi:coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to graNoslithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I (i) 600x600mm size

Providing and laying 25mm.thick kotah stone tiles in risers of steps, skirting and pillars of approved size, texture and colour laid over 12mm.thick cement mortar (1:3) and joined with grey cement slurry mixed with pigment to match the shade of the slab including rubbing to graNoslithic finish with approved quality of carborandum stone incuding cost of curing, taxes and raoyalty all complete as per building specification and direction of E/I

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement : 4 coarse sand), jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc.,complete. Size of Tile 600x600mm

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) Size of Tile upto 1000x1000 mm .

Providing and laying vitrified Cool Roof tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS: 154557-2007 / 15013006, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 1 coarse sand ), jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. Its solar reflective index ( SRI ) value should be above 78 complete. Size of Tile 300x300mmx10mm thick.

ALUMINIUM WORK Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness

FLOOR SPRING

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.

Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.Powder coated minimum thickness 50 micron aluminium

Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineerin-charge Powder coated minimum thickness 50 micron aluminium

WOOD WORK Suppling, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows, skylight, fanlights and celetial windows openings, including wedge over clamps all complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/l

Supplying, ftting and fixing good quality, well dressed and well seasoned sal wood work in roof members as pillars , plates rafters, purlins. Beams and type of batten with cost of nuts and bolts complete with cleats (with wooden checks) fitting with screws all complete as per building specification and direction of E/I

Supplying, ftting and fixing 32mm thick good quality, well dressed and well seasoned sal wood fully paneled shutters in doors and windows with 20mm thick panels. ledged and braced in doors and windows, with oxidised iron fittings such as hinges, sliding door, bolts,tower bolts, handles or rings hooks and eyes, cleats, sand blocks as per schedule taxes royalty all complete as per building specification and direction of E/I

Supplying, fiiting and fixing 32mm thick good quality, well dressed and well seasoned sal wood 1/3rd glazing 2/3rd paneled shutters in doors and windows with 20mm thick panel with one side plain and other side chamfered with aluminium fiitings as per schedule and 3mm thick plain glass panes fitted with sal wood beads and taxes all complete as per building specification and direction of E/I

Supplying, fitting & fixing 30mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality pheNosl formal dehydes synthetic resin of standard make with aluminum fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/I.

Providing 50x150mm teak wood Handrail with good quality of teak of av. 2.5M.length with smooth finishing and rounded edges properly fitted to the railing including cost of spirit polishing of approved shade and make all complete as per specification and direction of E/I

Supplying, fitting and fixing oxidised iron fittings of approved quality and make to doors and windows all complete as per building specification and direction of E/I 100mm Butt Hinge

300mm sliding door Bolt

250mm Tower bolt

100mm door handle with Plate

Hook and eye

Supplying, fitting fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality all complete as per direction of E/I

Supplying, fitting and fixing prefabricated alumium kicking plate 100mm x 3.15 mm, transperant or dyed to required colour and shade with necessary screws etc complete

Supplying , fitting and fixing glass panes including supplying putty, beads and nails after taking out old and broken glass panes and disposal of debris all complete as per building specification and direction of E/I 5.5mm Plain.

Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating Nost less than 120gm/ m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 Nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of Nost less than 30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded).

Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating Nost less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/ m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating Nost less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating Nost less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/ powder coating of Nost less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-incharge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall Nost be more than 1100x2200 mm (w x h) or 2.42 sqm.

Providing and fixing aluminium hanging floor door stopper, ISI marked, aNosdised (aNosdic coating Nost less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper

25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places

Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogeNosus fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge.

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

STEEL WORK (M S GRILL) Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is Nost supplied by the deptt.)

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.M.S. tube

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

ENABLING WORKS Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineerin-charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

ROAD WORKS Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain & foundation of other structure graded and compacted to meet requirement of table 300-2.

Construction of granular sub base by providining coarse graded materials, spreading in uniform layers with grader on prepared surface, mixing by mix in place method with vibratory roller to achieve the desired density, complete as per clause 401. Grading III Materials.

Making bell mouth opening/ entrance of size 100x50x50 cm for drainage pipe under footpath, including providing cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm Nosminal size) for shape of bell mouth, including plastering providing and fixing precast R.C.C./ S.F.R.C. slab including plastering with cement mortar 1:3 (1 cement : 3 fine sand) of 6 mm thickness on exposed surface of the slab & bell mouth including centring, shuttering & neat cement punning inside the bell mouth etc. all complete.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block makingmachine with strong vibratory compaction, of approved s;ze, design& shape, laid in required colour and pattern over and including 50mmthick compacted bed of coarse sand, filling the joints with line sandetc. all complete as per the direction of Engineer-in-charge.

Providing and laying at or near ground level factory made kerb stone of M- 25 grade cement concrete in position to the required line, level and curvature,jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall Nost to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).size of kerb 150mm wide and 450mm deep

Providing & fixing of White River (Stone) Pables size of 2" to 2.50" dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.

Retro- reflectorised Traffic signs (Providing and fixing of retro- reflectorised cautionary,mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflectivesheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm belowground level as per approved drawing) 60 cm equilateral triangle

60 cm circular

60 cm x 45 cm rectangular

60 cm x 60 cm square

90 cm high octagon

HORTICULTURE WORKS Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).

Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.

Fine dressing of the ground.

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately)

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) 2.14.1 Holes 1.2 m dia and 1.2 m deep

2.14.2 Holes 90 cm dia, and 90 cm deep

PHE WORKS Earth work in excavation (As per I.S. 3114/1965 for laying of different types and sizes of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of Engineerin-Charge. (a) For classification of Soil item - A

(b) For classification of Soil item - B

Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineerin-Charge. (For classification for Soil item - A & B)

Extra for earthwork in all kinds of soil for each additional lift of 1m or part there of over the initial lift of 1.5m as per specification and direction of Engineer-in-Charge.

SANITARY INSTALLATION Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S.approved make with 100mm H.C.I. ‘p’ trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S.equivalent make, complete with all fittings,C.I. or C. C.brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. (b) With 12.5 lit. low level C.I. Cistem

Supplying, fitting and fixing 40mm high vitreous white glazed earthen E.W.C. with ‘p’ trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I.handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450grams 15mm P.V.C. alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic solid state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming, all complete as per specification and direction of E/I. (b) 12.5 lit. low level PVC Cistem

Supplying, fitting and fixing flat back or angular, lipped front vitreous white glazed earthen ware urinal of ‘Hindustan "Parry" or any other approved I.S.S make with 5 liters capacity C.I. automatic fulsing cistern of reliance for any other I.S.S. approved make with all fittings with C.I.or R.S. brackets, standard size G.I. flush pipe with fitting clamps,15mm C.I. body brass spindle stop cock of approved quality weight not less than 400grams, 15mm P.V.C./Alkthene pipe 450mm longwith brass coupling at both ends and doing plumber joints including painting of exposed part with two coats of approved paint over a priming coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/I.

Supplying, fitting and fixing vitreous white glazed earthen ware indian squating type 600x350mm urinal plate of parry, Hindustan or any other I.S.S. approved make with internal flushing rim, 100mm white glazed earthen ware channel about 1m. long 5 litre capacity C.I. automatic flushing cistern of reliance or any other approved make with fittings R.S. or C.I. brackets 15mm and 45 cm long PVC / Alkathene pipe standard G.I. flush pipe for backand front with spreader fittings and brass coupling etc. 15 mm C.I. Body 'brass spindle stop cock weight not less than 450 grams. all complete including painting of exposed parts with 2 coats of approved paint over a coat of red oxide primer and cutting the wall and floor and making good the same as per specification and direction of E/I.

Providing & fixing Urinal Partition made of heat,bacteria,water chemical scratch impact and anti bacterial resistant 12mm thick soild compact laminate panels. Finish of compact laminate as per detail finished with approved texture/shade as per detail drawings. This also includes providing and fixing in position necessary hardware made out of stainless steel (Grade 304) Urinal Partition of 1200mm Height x 550 mm Depth

Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32mm C.I.brass waste, 15 mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.- Same for below counter wash basin

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I. (b)Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror. (Jharkhand Drinking Water SR 2018-19, Page 52 , Item 3.1.21) (i) 600mm x 450mm size

(c) (i)C.P Brass towel rail 20mm x 600 mm with bracket container

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineerin-approved quality & make and as per the direction of Engineerin-charge.

Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 225 mm

Flexible pipe 40 mm Dia.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

EXTERNAL WATER SUPPLY Supplying labour and tools for fixing G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketted joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge. (Pipe with socket to be supplied departmentally free of cost). (iii) 25 mm dia nominalbore G. I. pipe

(iv) 32 mm dia nominalbore G. I. pipe

Supplying and fixing of G.M. ferrule of approved make in existing C.I. main including drilling and taping C.I. main all complete as per specification and direction of Engineer-in-Charge. (iii)22 mm and 25 mm dia ferrule weight not less than 900 gms

Providing and fixing male ended 15mm dia brass bib cock of approved quality (Wt. not less than 350gms.) with extra socket all complete as per specification and direction of E/I.

Providing and fixing Gun metal full way valve of approved quality, all complete, as per specification and direction of E/I. (d) 32mm dia and weight not less than 700gms.

Supplying materials and labour for construction of 600x600x90mm stop cock chamber of brick masonry with 125 mm thick work of designation 75B in cement mortar (1:6) with 12mm thick cement plaster in C.M. (1:6) on inside only having 50 mm thick R.C.C. cover having 12 mm dia lifting rings, 2 nos. stop cock chamber will rest over 80mm thick P.C.C. (1:3:6) over one brick flat soling, including cost of earthwork, all complete job, as per approved design, specification and direction of E/I.

Supplying labours and tools for laying and jointing U.P.V.C. pipe in trenches and making joints with U.P.V.C. collar and solvent cement, including providing night guard, barrier & red light to safe guard against accident, all complete as per specification and direction of E/I (U.P.V.C. pipe with collar and solvent cement to be supplied departmentally free of cost) (Jharkhand Drinking Water (Market Rate) (a) 90/80 mm dia

(b) 110/100 mm dia

e) 200 mm dia Pipes

INTERNAL WATER SUPPLY SYSTEM Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.20 mm nominal outer dia Pipes 15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

40 mm nominal outer dia Pipes

External work Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.20 mm nominal outer dia Pipes. 40 mm nominal outer dia Pipes

50 mm nominal outer dia Pipes

62.50 mm nominal inner dia Pipes

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore

40 mm nominal bore

50 mm nominal bore

65 mm nominal bore

Providing and fixing brass bib cock of approved quality 15 mm nominal bore 20 mm nominal bore

Providing and fixing brass stop cock of approved quality 20 mm nominal bore

EXTERNAL SEWERAGE Earth work in excavation for laying of different types and sizes of R.C.C. spun pipes with disposal of excavated earth within initial lead and lift as per specification and direction of E/I.

Earthwork in back filling the trench after laying different types and sizes of R.C.C. spun pipes with earth removed during excavation within initiallead and lift as per specification and direction of E/I

Extra for earthwork in all kinds of soil foreach additional lift of 1M. or part there of over the intial lift of 1.5M. as per specification and direction of E/I.

RAIN WATER HARVESTING: Supplying materials for constructing rain water harvesting recharge pits of 1.2 m dia and 3 m depth with RCC pipes 1200 mm dia including collars

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry 'brick honey comb shaft with bricks and S.W. drain pipe 100 mm 'diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5

150 x 100 mm size P type

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 coarse sand (Zone III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard designInside dimensions 455x610 mm and 45 cm deep for single pipe lineWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Inside dimensions 600x850 mm and 45 cm deep for pipe line with three or more inlets :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing to wall, ceiling and floor unplasticised PVC 6.00 kgs/sqcm working pressure with pipe fittings, wall clips etc., and making good the wall, ceiling and floor for sanitary pipelines including cost of all materials, labour charges, HOM and testing complete as per specifications. 'b) 110mm dia

INTERNAL SEWAGE SYSTEM Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall) a) 110mm dia

b) 75 mm dia

c) 50 mm dia - 10kg/sqcm-wash basin/Sink

d) 40mm dia- 10kg/sqcm-wash basin

e) 63mm dia ( type A)

BORE WELL ,WTP & STP WORKS WATER TANK & TERRACE LEVEL WORKS Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Circular tank

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in charge,beyond 90 metre & upto 150 metre depth below ground level. 300 mm dia

Rocky strata including Boulders 300 mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.150 mm nominal size dia

Supplying, filling, spreading & leveling stone boulders of size range5 cm to 20 cm, in recharge pit, in the required thickness, for all leads& lifts, all complete as per direction of Engineer-in-charge.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:150 mm nominal size dia

PARK WORK EARTHWORK & PCC WORK Earth work in stripping by hydraulic machinery in grade A&B type of soil including moorumsoil, soil mixed with kankar, pebbles, and boulders upto 300 mm size and disposal of the same along with all organic materials in country side beyond 0.5 km upto 1 km in all by tipper including construction and maintenance of haul road etc as per specification and direction of E/I.

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure)

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).

Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.

Fine dressing of the ground.

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately)

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) 2.14.1 Holes 1.2 m dia and 1.2 m deep

2.14.2 Holes 90 cm dia, and 90 cm deep

Half brick circular tree guard in bricks, internal diameter 1.25 metre and height 1.2 metre above ground and 0.20 m below ground, bottom two courses laid dry and top three courses in cement mortar 1:6 (1 cement : 6 fine sand) and the intermediate courses being in dry honey comb masonry as per design complete:

15With common burnt clay F.P.S. (non modular) bricks of class designation 5.0

Providing and fixing M.S. flat iron tree guard 60 cm dia and 2 m high, above ground consisting 4 nos 25 x 6 mm, 2.25 m long and 8 nos 25 x 3 mm 2 m long verticals M.S. flats, riveted to 3 nos 25 x 6 mm M.S. flat iron rings in two halves, fixing together at site with required six numbers of 8 mm dia and 30 mm long bolts, including painting two coats with synthetic enamel paint of approved brand and manufacture over a coat of primer. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD/ any other approved name. The tree guard shall be suitably fixed to the ground by embedding four legs of tree guard in pits of suitable dia and to a depth of 25 cm, refilling the pits with soil and ramming, complete in all respect as per satisfaction and direction of Officer-in-charge.

Edging with bricks laid dry length wise, including required excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within a lead of 50 m Common burnt clay F.P.S (non modular) bricks of Class designation 7.5

Flooding the ground with water including making kiaries and dismantling the same.

Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge. Top inside dia 30 cm, outer bottom dia 20 cm, total height 30 cm with wall thickness of 25.4 mm

Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one port of manure) and placing them on approprite place i/c carriage of earth, manure and pots up to 50 mtr, as per direction of officer incharge. (The cost of good earth, earthen pots & manure will be paid seperately.) Size of Empty Pots 15cm Top dia, 8cm Bottom Dia & 15cm Perpendicular height.

Anti termite treatment by digging holes 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge.

Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.and as per direction of officer-in-charge.

P.C.C . M-100 with nominal mix of (1:3:6) in foundation with approved quality of jhama metal and down well graded and local river sand (washed and screened( - iii ------do----

Concrete work Providing P.C.C. M-150 with nominal mix of (1:4:8) in foundation with approved quality of stone metal grade - iii ( 50 mm to 25 mm. size) clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position. vibrating, skirting, curing, taxes and royalty all complete as per building specification and direction of engineer-in-charge.

STONE MASONRY WORKS -AMPHITHEATRE & HARDSCAPE Providing random rubble stone masonry in CM (1:6) in foundation and plinth with hammer dressed stone of less than 0.03 cum in volume and clean coarse sand of FM 2 to 2.5 including cost of screening , raking out joints to 20 mm depth, curing taxes and royalty all complete as per building specification and direction of E/I.

Providing Random rubble masonry in super structure

Providing rough dressed course stone masonry in Cement Mortar (1:6) in superstructure

Providing Ashlar stone masonry in CM 1:4 in superstructure

Providing Ashlar stone masonry in CM 1:6 in superstructure

Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.

Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in-charge.

Providing & fixing of White River (Stone) Pables size of 2" to 2.50" dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.

Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete.

Providing and laying at or near ground level factory made kerb stone of M- 25 grade cement concrete in position to the required line, level and curvature,jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).size of kerb 150mm wide and 450mm deep

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour Two coats

Providing and laying 60mm thick faciory made cement concreteinterlocking paver block of M -30 grade made by block makingmachine with strong vibratory compaction, of approved s;ze, design& shape, laid in required colour and pattern over and including 50mmthick compacted bed of coarse sand, filling the joints with line sandetc. all complete as per the direction of Engineer-in-charge.

HORTICULTURE WORKS Spreading of Sludge Farm Yard Manure or/and good Earth (Spreading of sludge farm yard manure or/ and good earth in required thickness (cost of sludge, farm- yard manure or/and good earth to be paid for separately))

Grassing with ' Doobs' Grass (Grassing with 'Doobs' grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed) In rows 7.5 cm apart in either direction

Making Lawns including Ploughing and Dragging with 'Swagha' Breaking of Clod (Making lawns including ploughing and breaking of clod, removal of rubbish, dressing and supplying doobs grass roots and planting at 15 cm apart, including supplying and spreading of farm yard manure at rate of 0.18 cum per 100 sqm)

Maintenance of Lawns or Turfing of Slopes (Maintenance of lawns or Turfing of slopes (rough grassing) for a period of one year including watering etc)

a) Planting Permanent Hedges including Digging of Trenches (Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 cum per 100 metres and supplying and planting hedge plants at 30 cm apart)

b)Maintenance of Hedge for one year

Planting of Trees and their Maintenance for one Year (Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge mannure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year)

Providing and displaying of cephortia Palm plant, having ht. 1.20 m. to 1.50m. with 8-10 suckers, well developed, fresh and healthy lush green leaves from bottom to top in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Providing and displaying of Schefflera Green plant (three in one), mounted on moss stick 90 cm, well developed with full of fresh & healthy leaves from bottom to top with rich foliage in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Providing and Displaying plants Calceolaria hybrid variety in full bloom well developed with fresh & healthy foliage in 20 cm Earthen Pot/Plastic Pot as per direction of the officer-in-charge.

Providing and Displaying plants Cyclemen hybrid variety specimen 5-6 plants in a pot, fresh & healthy in full bloom well developed in 35 cm Earthen Tray/ Nand. as per direction of the officer-in-charge.

Providing and Displaying plants Primula Hybrid variety specimen 5-6 plants in each Pot with fresh & healthy foliage in full bloom different colour well developed in 35 cm Earthen Tray/ Nand as per direction of the officer-incharge.

Providing and Displaying plants Salvia ht. 45 to 60 cm multi branches stacking with bamboo stick specimen plants type with full bloom well developed in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying plants Tulip Dutch hybrid variety (3 in one) plants in each pot in full bloom fresh & bright in different colour well developed in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge

Providing and Displaying plants Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge.

Providing and Displaying Adenium Obesum plant well developed with fresh & healthy 4 to 5 branch 60 to 75 cm ht. in 40 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.

Providing and Displaying Bamboo Buddha Valley with fresh & healthy 5 to 6 suckers 1.80 m to 2.10m ht umbrella type plant well developed in 50 cm Cement Pot as per direction of the officer-in-charge.

Providing and Displaying Cycus cirsnallis plant well developed with fresh & healthy 35 to 40 lush green leaves in 40 cm Cement Pot as per direction of the officer-in-charge.

RAINWATER HARVESTING & TUBEWELLS Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in charge,beyond 90 metre & upto 150 metre depth below ground level. All types of soil 300 mm dia

Rocky strata including Boulders 300 mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads& lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 150 mm nominal size dia

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm nominal size dia

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 150 mm nominal size dia

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

CARRIAGE Sand - 10Km

S.Chips - 22 Km

S.Metal - 22km

Bricks - 8 km

WIRING SYSTEM Point wiring in PVC conduit, with modular type switch : Wiring for light point/fan point/exhaust fan point/call bell point with 1.5sqmm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular type switch, switch plate, suitable size GI box etc as required complete. Group C

Power plug wiring in PVC conduit (2x4sqmm) Wiring for light/power plug with 2x4sqmm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit along with 1no. 4sqmm FR PVC insulated copper conductor single core cable for loop earthing as required.

Circuit main wiring in PVC conduit : Wiring for circuit/submain wiring along with earth wire with the following sizes PVC insulated copper conductor, single core cable in surface /recessed PVC conduit as required. 2 x 1.5sqmm + 1x1.5sqmm earth wire

2 x 4.0sqmm + 1x4.0sqmm earth wire

S/E PVC conduit Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20mm

S/F Modular type switch / socket Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connection but excluding modular plate etc as required. 5/6amps, one way switch

5/6amps, two way switch

15/16amps, one way switch

5/6amps, 3 pin socket outlet

15/16amps, six pin socket outlet

Telephone socket outlet

TV socket outlet

S/F Modular tupe electronic fan regulator Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required.

S/F Modular type blanking plate Supplying and fixing blanking plate on the existing modular plate and switch box but excluding modular plate etc as required.

S/F Modular boxes, base and cover plate Supplying and fixing following size modular GI box along with modular base and cover plate for modular switches in recess etc as required. 1 or 2 module

4 or 5 module

6 module

8/9 module

12 module

ITC fluorescent fitting directly on the surface Installation, testing and commissioning of prewired fluorescent fitting/compact fluorescent fitting of all types, complete with all accessories and tube etc directly on ceiling/wall including connection with 1.5sqmm FR PVC insulated copper conductor.

ITC fluorescent fitting with downrods Installation, testing and commissioning of prewired fluorescent fitting/compact fluorescent fitting of all types, complete with all accessories and tube etc including supplying and fixing ball and socket arrangement 2no. down rods of 20mm dia steel

ITC ceiling fan Installation, testing and commissioning of ceiling fan, including wiring the downrods of standard length (upto 30cm) with 1.5sqmm FR PVC insulated copper conductor single core cable etc as required.

Numbering of fan/fittings Numbering of ceiling fan/exhaust fan/fluorescent fitting as required.

ITC exhaust fan upto 450mm sweep Installation of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good of the damage, connection, testing, commissioning etc as required.

SWITCH GEARS AND DBs S/F SP MCB DB Supplying and fixing following way single pole neutral, sheet steel MCB distribution board, 240V on surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, DIN bar, detachable gland plate, interconnections, phosphatized and powder painetd including earthing etc as required,(But without MCB/RCCB/Isolator) 12 way double door

16 way double door

S/F Vertical type TP MCBDB Supplying and fixing the following way, three pole and neutral, sheet, MCB distribution board, 415V, on surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, DIN bar, detachable gland plate, interconnections, phosphatized and powder painetd including earthing etc as required,(But without MCB/RCCB/Isolator) 4way (8+12) Double door, vertical type

8way (8+24) Double door, vertical type

12way (8+36) Double door, vertical type

S/F B series SP MCB Supplying and fixing 6A to 32A rating, 240V, B series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCBDB complete with connections, testing and commissioning etc as required. 6/32amps, single pole, B series

S/F C series SP MCB Supplying and fixing following rating, 240V, C series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCBDB complete with connections, testing and commissioning etc as required. 6/32amps, Single pole

6/32amps, SPN

6/32amps, TPN

50/63amps, TPN

S/F SPMCB blanking plate Supplying and fixing single pole blanking plate in existing MCBDB complete as required.

Supplying and fixing following rating four pole, 415V, isolator in the existing MCB DB complete with connections, testing and commissioning etc as required. 40 amps

S/F SPN RCCB Supplying and fixing following rating double pole, 240V, residual current circuit breaker(RCCB) having a sensitivity current upto 300mA in the existing MCBDB complete with connections, testing and commissioning as required. 16/25 amps

S/F TPN RCCB Supplying and fixing following rating TP&N, 415V, residual current circuit breaker(RCCB) having a sensitivity current upto 300mA in the existing MCBDB complete with connections, testing and commissioning as required. 40 amps

S/F 20amps SPN MCB industrial socket outlet Supplying and fixing 20amps, 240V, SPN industrial type, socket outlet with 2 poleand earth, metal enclosed plug top along with 20amps C series SP MCB in a sheet steel enclosure, on surface or in recess with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc as required.

P/F danger notice plate Providing and fixing M.V danger notice plate of 200mm x 150mm, made of mild steel, at least 2mm thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required.

P/F HT danger notice plate Providing and fixing M.V danger notice plate of 250mm x 200mm, made of mild steel, at least 2mm thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required.

EARTHING GI Earth pipe electrode Earthing with GI earth pipe 4.5m long, 40mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal and salt as required.

P/F 25mmx5mm GI earth strip in surface/recess Providing and fixing 25mmx5mm GI earth strip on surface or in recess for connections etc as required.

P/F 6SWG GI loop earthing wire in surface/recess Providing and fixing 6SWG GI wire on surface or in recess for connections etc as required.

LV/MV CABLE LAYING (WITH SAND AND PROTECTIVE COVERING) MV cable laying upto 25sqmm in ground: Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1kV grade of size not exceeding 25sqmm direct in ground excavation, sand cushioning, protective covering and refilling the trench etc as required.

MV cable laying upto 400sqmm in ground: Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1kV grade of size exceeding 120sqmm and not exceeding 400sqmm direct in ground excavation, sand cushioning, protective covering and refilling the trench etc as required.

HV CABLE LAYING 11kV cable laying upto 120sqmm in ground: Laying of one number PVC insulated PVC sheathed /XLPE power cable of grade exceeding 1.1kV but not exceeding 11kV of size not exceeding 120sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

11kV cable laying upto 400sqmm in ground: Laying of one number PVC insulated PVC sheathed /XLPE power cable of grade exceeding 1.1kV but not exceeding 11kV, of sizeexceeding 120sqmm and not exceeding 400sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Hard rock excavation Excavation of trench in hard rock not exceeding 1.5m in width, and lift upto 1.5 m, including getting out the excavated soil and disposal of excavated soil as directed with in a lead of 50m.

ROUTE MARKERS Supplying and making cable route marker with cement concrete 1:2:4 of size 60cm x 60cm at the bottom and 50cm x 50cm at the top with a thickness of 10cm including inscription duly engraved as required.

POLE ERECTION Erection of metallic light standard upto 6.5m in CC: Erection of metallic street light standard pole of length exceeding 4.5m but not exceeding 6.5m in cement concrete 1:3:6 foundation with cement concrete collar of size 0.4mdia x 0.5m height to accommodate the looping type cable end box including excavation and refilling etc as required.

PVC INSULATED COPPER CONDUCTOR 4 pair, 0.5sqmm copper conductor, FR PVC insulated, unarmoured telephone cable

PVC/XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100volts 6sqmm, 2 core

10sqmm, 2 core

10sqmm, 4 core

16sqmm, 4 core

25sqmm, 3.5 core

35sqmm, 3.5 core

50sqmm, 3.5 core

185sqmm, 3.5 core

240sqmm, 3.5 core

Excavation and refilling (as per SOR 2016)

CEILING FAN / WALL FAN / EXHAUST FANS Ceiling fan 1200mm

15" (380mm) metal exhaust fan

LT /HT CABLES END TERMINATIONS AND CABLE TRAYS. Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 X 6 sq. mm (19mm) -6sqmm, 2 core, A2XWY

2 X 10 sq. mm (19mm)-10sqmm, 2 core A2XWY

4 X 10 sq. mm (25mm)-10sqmm, 4 core A2XWY

4 X 16 sq. mm (28mm)-16sqmm, 4 core A2XWY

3½ X 25 sq. mm (28mm)-25sqmm, 3.5 core A2XFY

3½ X 35 sq. mm (32mm)-35sqmm, 3.5 core A2XFY

3½ X 50 sq. mm (35mm)-50sqmm, 3.5 core A2XFY

3½ X 185 sq. mm (57mm)-185sqmm, 3.5 core A2XFY

3½ X 240 sq. mm (62mm)-240sqmm, 3.5 core A2XFY

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. The rate shall include all supporting brackets, anchor fasteners, screws, bolts, nuts etc.as required. For tray sizes upto 300mm threaded rod support can be considered. For sizes above 300mm angle /channel support shall be considered. 150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 62.5 mm depth X 2.0 mm thickness

450 mm width X 62.5 mm depth X 2.0 mm thickness

600 mm width X 62.5 mm depth X 2.0 mm thickness

750 mm width X 62.5 mm depth X 2.0 mm thickness

Bends for above 150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 62.5 mm depth X 2.0 mm thickness

450 mm width X 62.5 mm depth X 2.0 mm thickness

600 mm width X 62.5 mm depth X 2.0 mm thickness

750 mm width X 62.5 mm depth X 2.0 mm thickness

Tees for above 150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 62.5 mm depth X 2.0 mm thickness

450 mm width X 62.5 mm depth X 2.0 mm thickness

600 mm width X 62.5 mm depth X 2.0 mm thickness

750 mm width X 62.5 mm depth X 2.0 mm thickness

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 62.5 mm depth X 2.0 mm thickness

H.T.CABLE TERMINATION (Heat shrinkable type) Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required upto 120 sq mm

upto 400 sq mm

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required

upto 120 sq mm

upto 400 sq mm

Supply and construct chain link fencing all round the switchyard using steel angle vertical supports of 2.5m height and including and providing 1no. lockable gate as required.

Spreading of 2 layers of 2" size granite stones in the substation as required complete.

Supply and installation of inspection chamber of 750mm x 750mm x1200mm depth with RCC chamber cover as required.

LIGHTING INSIDE GALLERIES Supplying,installation,testing and commissioning of Passive Infrared(PIR) technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 2.8 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required

Supplying,installation,testing and commissioning of Passive Infrared(PIR) technology based occupancy sensor with day light dimming(lighting level shall be regulated as per availability of natural day light in an area along with occupancy detection.) having high preformance, regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 2.8 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.

Supplying,installation,testing and commissioning of Microwave technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 2.6 mtr and for 5m X 20m coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.

Supplying,installation,testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery andindication for relay status i/c programming at site complete as required. 1 output per phase and suitable for single phase supply

2 output per phase and suitable for single phase supply

3 output (1output per phase) and suitable for three phase supply

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A

Group B

Group C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A

Group B

Group C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

TELEPHONE AND DATA Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 20 mm

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 75 mm X 75 mm X 60 mm deep

100 mm X 100 mm X 60 mm deep

150 mm X 75 mm X 60 mm deep

150 mm X 150 mm X 60 mm deep

Supplying, installation, testing & commissioning of central graphical fire alarm management system to centrally monitor and operate the fire alarm system complete as required.

Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required.

Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. speaker cable Single pair, 2-core, 1.5 sqmm

speaker cable Two pair, 2-core, 1.5 sqmm

speaker cable Three pair, 2-core, 1.5 sqmm

speaker cable Four pair, 2-core, 1.5 sqmm

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.

PUBLIC ADDRESS SYSTEM Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.

Supplying, installation, testing & commissioning of 6 inches dia, 2 watts, 70/100 volts ceiling speaker complete as required.

Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms operating at 240 volt AC supply complete as required.

SECURITY & CCTV SYSTEM Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable

2 run of cable

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.

IT INFRASTRUCTURE + STAFF ATTENDENCE Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required 1 run of cable.

2 run of cable

3 run of cable

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.

HVAC SYSTEM DUCTING GRILLS DIFFUSER & INSULATION Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Thickness 0.80 mm sheet

Thickness 1.00 mm sheet

Thickness 1.25 mm sheet

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Thickness 0.80 mm sheet

Thickness 1.00 mm sheet

Thickness 1.25 mm sheet

Supplying, laying, fixing, testing and commissioning of following thickness closed cell elastrometric nitrile rubber of class 'O' applied by suiatable adhesive, as per specifications and as required complete in all respect. 19 MM

Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

Supply, installation, testing and commissioning of Motorized (ON-OFF Type) duct mounted GI volume control damper with enthalpy sensor and necessary control wire (minimum 1.5 sqmm) for integration within AHU room

Damper

Actuator

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.

Supplying, fixing acoustic lining on wall and ceiling of AHU rooms with 50mm thick, density 32 kg/cu.m resin bonded glass fiber insulation friction fixed in 610mm x 610 mm frame work made of 25X50X50X50X25 mm made out of 0.6mm thick GI sheet U shaped channel and covered with reinforced fiber glass tissue and finished with 0.80 mm perforated aluminium sheet etc. complete as required and as per specifications.

PARTITION & PANELLING WORKS Providing ply wood partition upto 2.5M. Height 6mm thick commercial ply wood of standard make fitted and fixed both sides over sal wood frame of 50x50mm posts at 122cm.centres and 3no.s 50x50mm horizontal members including cost of anchoring the partition to floors and walls properly and providing 2 coats of synthetic enamel paint over a coat of priming of approved shade and make and leaving space for doors if necessary all complete as per drawing specification and direction of E/I

Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated hollock wood

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick

1.0 mm thick

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/ sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, Galvanised M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each with zinc coating of 120 gms/sqm(both side inclusive)) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.

75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: (part 3) : 1996 (Board with BIS certification marks)

Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in-charge.

Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish.

Tapered edge calcium silicate board made with calcareous & siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with compressive strength 225 kg/ sq.cm, Bending strength 100 kg/sq.cm. -10mm thick

Multipurpose cement board reinforced with suitable fibre cement screw. 8 mm thick Cement bonded wood particle board as per IS:14276

Plain Gypsum plaster board conforming to IS: 2095 (Part -1) : 2011 (Board with BIS certification marks) 12.5 mm thick

Providing and fixing 25mm thick pre-laminated medium density fibre board exterior grade ( Grade-I) IS:14587:1998 marked with one side decorative and other side balancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with necessary screw etc all complete.

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick

25 mm thick

Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Marine plywood conforming to IS: 710

Fire retardant plywood conforming to IS: 5509

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Sal wood

Kiln seasoned and chemically treated hollock wood

Extra for additional labour for circular works, such as in frames of fan light Sal wood

Kiln seasoned and chemically treated hollock wood

Providing and fixing 25 mm thick shutters for cup board etc.: Panelled or panelled & glazed shutters : Second class teak wood including iSi marked nickel plated bright finished M.S. piano hinges with necessary screws

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Coir Veneer Board (conforming to IS 14842) 12 mm thick

Float glass panes 5.0 mm thick glass panes (weight not less than 12.5 kg per sqm

Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge. With decorative veneering on one side and commercial veneering on other side

With non decorative veneering on both sides

CEILING WORKS Providing beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with : Sal wood

Hollock wood

Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) : Flame retardant face insulating board

Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge With Type SE - Self Extinguishing type 50 mm thick

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum moisture resistant board

Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineerin-charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.

12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing.

Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately).

Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately).

Providing 150mm grassthatching over bamboframe including laying grass uniformly in proper slope tying with string with split bambo at the top including cost of all material excluding cost of bambo frame work

MISCELLANEOUS WORKS Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding

Fixed to openings /wooden frames with rawl plugs screws etc

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm

Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type

Double strip (horizontal type)

Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineerin-charge.

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 20 mm dia (heavy type)

25 mm dia (heavy type)

Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50 mm (base and height)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of hollock wood in scantling of section 50X25 mm, fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building

Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge:

Bamboo wood Tile Wall Cladding 10mm thick of size 1900mm x 135mm

Non staining water resistant clear silicon

Float glass panes of nominal thickness 8 mm (weight not less than 20.00 kg/sqm)

21mm thick clear toughened Laminated glass for fins with holes

Protective Tape

6 mm thick clear heat strengthened glass

Glass wool of denisity @ 48 Kg / cum with black glass tissue (BGT)-50 mm thk

Resin Bonded Rockwool 48 kg/m3

Factory made 30 mm thick shutters with laminated veneer lumber styles & rails as per TADS 15:1995 and panels of sheet glass using 10 kg/ sqm glass panes

Factory made 30 mm thick shutters with laminated veneer lumber styles & rails as per TADS 15:1995 and panels of sheet glass using 10 kg/ sqm glass panes

Factory made 30 mm thick shutters with laminated veneer lumber styles & rails as per TADS 15:1995 and panels of sheet glass using 10 kg/ sqm glass panes

Outdoor Thermo treated decking Wooden Flooring is 95 x 28 mm Laminated wooden planking, tongued and grooved in flooring, including fixing with iron screws complete as per building specification and direction of Engineer incharge. with Second class teak wood

Supplying and installation of Jado Patia Art work on Museum walls. The cost to include preparation of surface, all materials, paints, tools and tackles to create art work to the satisfaction of the Engineer Incharge under the guidance of the Museum Curator. Supplying and installation of Baked terracotta panels with intricate details representing life stories of Sri Krishna , Goddess Durga or scenes ( Reference panels on Maluti Temples) as approved by the Museum curator. The Size of Each panel to vary between 200 mm x 450 mm to 300 x 300mm and 600mm x 900 mm and thickness varying from 8 mm to 15 mm as required. The Cost to include sourcing and transport to museum Site

Providing, Installing testing and commissioning of faucet including wall flanges, CP brass Over head shower etc., complete.

Providing, Installing testing and commissioning of 110x75 PVC floor trap including, SS grating and cockroach trap etc., complete.

Supplying, fixing of approved make SS body Paper Towel Dispenser with necessary screws, Clamps etc., complete

Supplying, fixing, testing and commissioning of approved make Electric Hand Drier twin blower integrated with timer (0-3 minutes) and infrared arrangement. The drier shall be fully automatic.

Supplying and fixing GI angle iron brackets, hangers, supports for maintenance as per detail drawing for supporting sewerage, rain water and water supply pipes in shafts with suitable MS clamps, bolts, nuts and washers, fixed on shaft walls etc. complete.

Supply and fixing SWR PVC Plain/multi floor traps of `P' or `S' type with SS grating (heavy quality hopper type with frame) and 75mm outlet with necessary water proofing after fixing. ( FOR URINALS- Supplying, fixing and testing of 75mm PVC P trap for urinals with fabricating boss connection for inlet pipe, with SS frame and grating 75mm dia. outlet, fixed below slab suspended to the ceiling, including connection pipe, necessary support etc. complete0 (Heavy duty type)

Supplying, fixing and testing PVC rain water collection kurra with leaf trap grating made out of UPVC with flange complete. (Terrace rain water )a) 160mm dia- Side entry b) 110mm dia- Side entry

Supplying, fixing, testing and commissioning domestic water supply pump, work on 3Ph, 5.5kw with necessary unions, flanges with water level controller and cabling etc., complete.Rate quoted shall be inclusive of suitable control panel with auxiliary relays / contactors / timer for sequence operating for starting and stopping. and wiring from control panel and to the pumps etc. complete. Duty : - 9.5 Lps at 40 M head.

Supplying, fixing, testing and commissioning submersible pump of adequate HP, capable of giving a required discharge at suitable head to work on 3Ph, 5.5kw with necessary unions, flanges with water level controller and cabling etc., complete.Rate quoted shall be inclusive of suitable control panel with auxiliary relays / contactors / timer for sequence operating for starting and stopping. and wiring from control panel and to the pumps etc. complete.

Supply, Installation & Commissioning of Sewage Treatment Plant of Capacity 5 KLD. System- SBR type

Supply, lowering & installation of RCC readymade humepipe septic tank at suitable location including earth work excvation in all types of soil, necessary pcc bedding as directed including sewerline connections at inlet & outlet, Inspection Chambers etc., complete as per standard design & as directed. 50 User Capacity

Providing, fixing and commissioning suitable complete Pumping system consisting of horizontal /vertical multistage centrifugal pump having stainless steel (SS 304) impellers, shaft (SS-316) and housing, with single mechanical seal and pressurised tank of 100 liters capacity, complete with all standard accessories. No. of Pumps : 2 (1 working + 1 stand by) Capacity : 100lpm of Each Pump Head : 20 m

Supply, Installation & Commissioning of Water Treatment Plant of Capacity 3.5 KLD. System Consists :- Feed Pumps 2 nos, Pressure sand filter, Activated Carbon Filter, Softner, UV Sterlizer, complete frontal piping & Valves, Control Panel with necessary etc. Nos of Streams-1 Product Flow - 0.5 m3/ hr Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.91 m deep with SFRC cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :

MISCELLANEOUS WORKS Drinking water kiosks Frame will be MS and Panel will be of ACP. Kiosk will be designed in the way that Raw water storage tank, RO, Chiller and pure water storage, tank can be fixed inside it. Acquires very less space. Best suitable for all Urban & Rural areas Minimum space required- 4 feet* 4 feet* 10 feet. Ground water recharge system (Optional) Solar panel can be enabled (optional) HPN System Concrete foundation 4*4*1 Feet Transportation, Handling charges & packaging charges Installation & Fixing Charge

Wall hanging split level fountains. Auto adjusts low flow bubblers. Mechanical push pad activation. Fountains basis is of SS 316 and panel will be of SS 304.

Solar Street Lights 18watt Led Solar street light system

Signage Made of Nandi wood as per the design Frame Size : height – 4Mtr x 2.75 Width in reverse L Shape with necessary fixtures at site a)1.5 x 2 Mtr

Signage Made of Nandi wood as per the design Frame Size : height – 4Mtr x 2.75 Width in reverse L Shape with necessary fixtures at site 2 x 1 Feet

Provision &installation of solar powers motors (5000 WP) of stainless steel suitable for minimum bore well operating head 100 mtr ,38mm die UPVC schedule 6 INCH column pipe & 4 sq mm*3 core flate submersible cable of IS 694:1190including monopoly crystalline PV array (250W*20=5000W ) mounted on steel structure for agriculture. in a suitable direction to optimize panel uses &with stand the wind pressure up to 200 km/h &making suitable arrangements to on the same bore when there is on solar power including 02 year warranty against defects in materials &workmanship with locking arrangement of switch board the system should be eco friendly

Solar Bollard Lights of 12 watt panel and LED based 1 to 1.5 feet height as shown in attached picture.

High mast light fixture with 20m pole, 12 no. 300W LED flood light fixtures suitable to light up the assigned area as indicated in the drawing. The fixture shall be complete with all accessories required for the installation complete.

Supply and fixing of Metal Gazebo of victorian model of height 133" and width 155" compleet as per the E/C

LT PANEL BOARDS Supply, installation, testing and commissioning of M.V.Distribution Boards suitable for 415V, 3 phase, 4 wire, 50Hz distribution system. The panel shall be free standing, floor mounting, sheet metal enclosed, flush front with aluminium busbars, separate earth bus shall be provided throughout the length of the panel. The incoming and the outgoing feeder breakers, switch fuse units, change over switches, indicating lamps, meters etc. shall be accommodated in a modular multi tier arrangement. A minimum of 400mm clearance shall be given from the floor level to the bottom most termination point. The painting shall be done in conformity with IS code.

Adequate size cable alley shall be provided all round the panel and at the back for easy bending and terminations. The outgoing feeders inside the panel shall be connected through solid busbars. Flexible cable links are not acceptable. Busbars shall be provided with PVC heat shrinkable sleeves or heat resistant insulated paint. The panels shall be suitable for cable entry from top / bottom. The copper earth strip of adequate size in 2runs shall run throught out the perimeter of the bottom of the panel. The panel shall be fabricated only after the approval of fabrication drawings by the consultant. All MCB used for lighting loads shall be B curve, motor loads shall be C curve and used for computer or any thyristor loads shall be D curve. All potential free contacts for Breakers " ON" "OFF" " TRIP" will be wired with required connector suitable for BMS cable termination.

MAIN LT PANEL One(1) - Incomer feeder having (EB) One (1) - 800A, 4pole, 50kA, motorised MCCB. The MCCB shall be microprocessor based and with trip free feature with ON, OFF and TRIP indications, with 2NO+2NC auxiliary contacts, terminal shrouds, sliding type front operation kit with overload (adjustable), short circuit, shunt trip and earth fault releases. One (1) - Transient voltage surge supressor, 35kA with suitably rated circuit breaker. One (1) - Digital multidata meter with kWh reading facility suitable for iBMS connectivity on MODBUS with RS 485. Three (3) - 800/5A, 10VA, Cl1.0, CTs (for MDM) Three (3) - 800/5A, 10VA, Cl1.0, CTs (for APFCR) Three (3) - phase indicating lamps with MCB. One(1) - CBCT with earth leakage relay (1-8A) One(1) - Incomer feeder having (DG)

One (1) - 800A, 4pole, 50kA, motorised MCCB. The MCCB shall be microprocessor based and with trip free feature with ON, OFF and TRIP indications, with 2NO+2NC auxiliary contacts, terminal shrouds, sliding type front operation kit with overload (adjustable), short circuit, shunt trip and earth fault releases. One (1) - Digital multidata meter with kWh reading facility suitable for iBMS connectivity on MODBUS with RS 485. Three (3) - 800/5A, 10VA, Cl1.0, CTs (for MDM) Three (3) - phase indicating lamps with MCB. One(1) - CBCT with earth leakage relay (1-8A) One (1) - Electro /mechanical interlocking between the two incomer feeders so that only one of them is ON at any given instant of time. One (1) - set 3phase, 4Wire, 50Hz, 415V, 800A, 35kA for 1 second, Aluminium busbars.

Outgoing Feeders : Eight (8) - Outgoing feeders each having (Outdoor AC - 6no. + 2no. spares) One (1) - 125A, TPN, 16kA, MCCB. The MCCB shall be with trip free feature with ON, OFF and TRIP indications, with 2NO+2NC auxiliary contacts, terminal shrouds, sliding type front operation kit with overload (adjustable), short circuit, shunt trip and earth fault releases.

One (1) - Outgoing feeder having (75kVAr APFCR) One (1) - 200A, TPN, 25kA, MCCB. The MCCB shall be with trip free feature with ON, OFF and TRIP indications, with 2NO+2NC auxiliary contacts, terminal shrouds, sliding type front operation kit with overload (adjustable), short circuit, shunt trip and earth fault releases. Eight (8) - Outgoing feeders each having (LDBs - 2no. + Lift 4no. + 2no. spares) One (1) - 32A, TPN, 10kA, MCB. Eight (8) - Outgoing feeders each having (RPDBs - 2no.+ UPS feeder 1no.+ pump feeder1no.+ STP feeder -1no. + Ext lighting feeder1 no. + 2no. spare) One (1) - 63A, TPN, 10kA, MCB. Three (3) - Outgoing feeders each having (Emergency UPS for lighting - 1no.+2 no. spare) One (1) - 63A, DP, 10kA, MCB. One (1) - Outgoing feeder having (Restaurant) One (1) - 100A, TPN, 16kA, MCCB. The MCCB shall be with trip free feature with ON, OFF and TRIP indications, with 2NO+2NC auxiliary contacts, terminal shrouds, sliding type front operation kit with overload (adjustable), short circuit, shunt trip and earth fault releases. One (1) - Digital dual power kWh meter suitable for iBMS connectivity on MODBUS with RS 485. Three (3) - 100/5A, 10VA, Cl1.0, CTs (for DkWh)

H.T.CABLE(only inside the premises) Supplying of 1(3C x 400 Sq.mm), 11kV cross linked polyethylene (XLPE) insulated aluminium conductor steel armoured cables buried underground.

Supplying of 1(3C x 95 Sq.mm), 11kV cross linked polyethylene (XLPE) insulated aluminium conductor steel armoured cables buried underground.

Lighting arrestor

MISCELLANEOUS ITEMS Supply and fixing of approval make, 11kV grade, rubber gloves.

Providing and fixing in position approved shock treatment chart written in English and Local Language. The chart shall be framed in Teakwood and covered with glass.

Providing and fixing in position 2.5mm thick 11kV grade, 'rubber mat of approved make and as required by EB authorities and as per IS 15652.

SUBSTATION EQUIPMENT : RING MAIN UNIT (RMU, OUTDOOR TYPE) - IP - 56 Design, supply, installation and testing of 11kV Outdoor Metal Enclosed Ring Main Unit with two no. (2) incoming feeders each consisting of One (1) 630A, 21kA, 11kV, LBS with earth switch and One (1) outgoing feeder with 630A, 21kA, 11kV, VCB. The Panel shall be of outdoor type (IP 56) protection suitable to accommodate cables for all the feeders with necessary cable boxes, busbars and accessories complete as required byjseb. The rate shall be inclusive with all civil works.(RMU Shall be DAS enabled/compatable as per JVBNL Requirement) NOTE: RMU rate is considered for DAS compatable. The rate for the above RMU Panel : Tri vector metering (JSEB metering cubicle)

Design, manufacture, testing at works, of Tariff Metering Panel along with supply and fixing of Trivector meter as per departmental technical specification, including supply, testing, certification at approved facility and installation of the tested 50/1A, cl 0.2, 10VA CTs for tariff metering in co-ordination with department. The rate shall be inclusive of arranging for witnessing the testing and calibration from JSEB official and client representative as required complete. The rate shall also include erection, site testing and commissioning of TVM Metering Panel as per departmental technical specification and also start up and essentials spares required to complete the installation. The rate for the above RMU Panel :

11kV LBS PANEL Design, manufacture, testing at works, supply, installation, testing at site and commissioning of 11kV Outdoor metal enclosed 11kV LBS panel with one (1) - 630A, 11kV, LBS with earth switch. The rate shall also be inclusive of necessary hardware for grouting, minor civil works etc. as required complete for proper installation. The rate for the above LBS Panel :

TRANSFORMER Supplying , erection, testing & commissioning of 400kVA capacity 11000V primary and 433V secondary,Delta-Star, copper wound, three star rated, 3phase, 50Hz, Dyn11, step down, oil filled , with OLTC & RTCC, outdoor type, plinth mounted type transformer as specified with cable box on both HT / L.T side and also initial fill of the oil. The rate shall be inclusive with all civil works. The transformer shall conform to IS1180, as per JVBNL requirement and shall be approved by JVBNL. the rate for above Transformer :

SUBSTATION MISCELLANEOUS The professional charges for liason work and departmental procedures required for the above said work . The work shall include the following: * Complete liasoning with JVBNL and electrical inspectorate * Obtaining the feasibility report and spot inspection, etc. * Obtaining sanction of L.T. connection of one (1) nos.400kV * Preparation and submission of all statutory drawings to EB and electrical inspectorate. * Obtaining necessary approvals and submitting to the clients. * Arranging for the service from the JVBNL.* Any other works related to JVBNL and Electrical inspectorate. The rate for above work

Supply & Installation of Light fixture - type 1- 36 W LED Neutral white - 2ft x 2ft Recess mounted 2x2 luminaire which mimics the pattern of Sun movement by changing its colour temperature & light intensity with remote.

Remote for above

Supply & Installation of Light fixture - type 2- 16 W Surface Mount/ Recessed Mount LED - light 50W. White powder coated recessed mounted fixture. Pressure die-cast aluminum housing with high efficiency reflector. Spring loaded mounting brackets for ease of installation.

Supply & Installation of Light fixture - type 2 A- 30 W Surface Mount/ Recessed Mount LED - light White powder coated recessed mounted fixture. Pressure die-cast aluminum housing with high efficiency reflector. Spring loaded mounting brackets for ease of installation.

Supply & Installation of Light fixture - type 2 B- 2 X 24 W W Recessed Mount LED - light White powder coated recessed mounted fixture.Pressure die-cast aluminum housing with high efficiency reflector.Spring loaded mounting brackets for ease of installation -Recessed mounted adjustable spots with frame.

Supply & Installation of Light fixture - type 3- 52 W Surface Mount/ Recessed LED Light VERDANT LED : Wellglass luminaire./Highbay luminaire.

Supply & Installation of Light fixture - type 4- Internal Landscape Light- Led- IP 65 rated Bollard Light

Supply & Installation of Light fixture - type 4- Internal Landscape Light- Led- IP 65 rated Foot light

Supply & Installation of Light fixture - type 5- 30W street light fixture INCLUSIVE OF 9 M POLE

Supply & Installation of Light fixture - type 6- LED wall mounted decorative fixture

Supply & Installation of Light fixture - type 7- Led track mounted fixture - Black/ white- warm white/ 18 W inclusive of tracks- 1 track length per 4 fixtures inclusive of necessary choke ballast etc-Single phase track

Supply & Installation of Light fixture - type 8- 18W/20W Square light LED

Supply & Installation of Light fixture - type 9- 120 W Flood Light for Courtyqrd Area Highbay luminaire.

Supply & Installation of Light fixture - type 10- 18 W LED - Mirror optic - 4 ft legth

Supply & Installation of Light fixture - type 10- 100 w LED highbay luminaire for façade lighting with remote control

Handset

UPS WORKS UPS for power sockets - 15kVA 3Phase input and 3 phase output with 10 minutes battery back up

UPS for power sockets - 10kVA 1Phase input and 1phase output with 30 minutes battery back up

DG WORKS 320kVA DG set with AMF panel, acoustic enclosure, fuel & exhaust piping etc.

SECURITY & CCTV Supply and Installation of wall mountable 4U Server Rack of min-450 mm depth with transparent toughened glass door , and overall made of S PCC Quality Cold Rolled Steel Metal with perforations on front and rear door and locable facility complete with brackets ,clamps tools and tackles as per approval by EIC

Supply and Installation of D-LINK DGS-1100 SMART MANAGED POE SWITCH 12 POE PORTS (D-Link) (D-LINK / DGS-1100) or equivalent with 24 numbers of of 10G SFP+ Port(Uplink) and number. of 100 G QSFP+ Port and power supply socket complete with brackets ,clamps tools and tackles as per approval by EIC

Supply and Installation of Surveillance Hard disk 2 TB (TOSHIBA) (HDWU120UZSVA) or equivalent each supporting upto 16 cameras per harddisk as per approval by EIC

Supply and Installation of Surveillance Tyco 8MP DOME CAMERA (Tyco) (American Dynamics Illustra IPS12FFOCWIYA) or equivalent IP, CMOS type outdoor type camera housed in Aluminium casing, day night capable with illumination range of 15 m, supporting D1 (704 x 480 Pixel) ,HD (1280 x 720 Pixel),Full HD (1920 x 1080Pixel) ,4K HD (3840 X 2160 Pixel) each, supporting audio and Alarm interface with Wide dynamic range as per approval by EIC

Supply and Installation of Surveillance CP PLUS 2MP BULLET CAMERA (CP PLUS) (CP Plus - UNC-TA21L3-DS) or equivalent IP, CMOS type outdoor type camera housed in Aluminium casing, day night capable with illumination range of 15 m, supporting D1 (704 x 480 Pixel) ,HD (1280 x 720 Pixel),Full HD (1920 x 1080Pixel) ,4K HD (3840 X 2160 Pixel) each, supporting audio and Alarm interface with Wide dynamic range as per approval by EIC

Supply and Installation of Surveillance CP PLUS 4MP DOME CAMERA (CP PLUS) (CP-UNC-VB41ZL3-VMD) or equivalent IP, CMOS type in door type camera housed in Aluminium casing, day night capable with illumination range of 15 m, supporting D1 (704 x 480 Pixel),HD (1280 x 720 Pixel),each, supporting audio and Alarm interface with Wide dynamic range as per approval by EIC

Supply and Installation of Surveillance CP PLUS 2MP BULLET CAMERA (CP PLUS) (CP Plus & CP Plus, CP-USCTB24L3- DS) or equivalent IP, CMOS type intdoor type camera housed in Aluminium casing, day night capable with illumination range of 15 m, supporting D1 (704 x 480 Pixel) ,HD (1280 x 720 Pixel) each without Audio and without Alarm interface with Wide dynamic range as per approval by EIC

Supply and Installation of Surveillance CP PLUS 2MP DOME CAMERA (CP PLUS) (CPPLUS 2MP DOME CAMERA) or equivalent IP, CMOS type intdoor type camera housed in Aluminium casing, day night capable with illumination range of 15 m, supporting D1 (704 x 480 Pixel) ,HD (1280 x 720 Pixel) each without Audio and without Alarm interface with Wide dynamic range as per approval by EIC

IT INFRASTRUCTURE & STAFF ATTENDANCE Supply and Installation of D-Link NFR-42U-8010-BL-SK Rack (DLink) or equivalent- Server Rack Enclosure size-42U-Freen Standing-Depth of upto 1000mm-Made of SPCC Quality Cold Rolled Steel Metal with Read and Front door Perforation-Secure Locks available-inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of Netshell 27U - 600W X 600D, Top cover with 4 x cutout for cable entry (Netshell) (Netshell NS-27-6X6) or equivalent- Server Rack Enclosure size-27U-Freen Standing-Depth of upto 600mm-Made of SPCC Quality Cold Rolled Steel Metal -inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of D-LINK DGS-1100 SMART MANAGED POE SWITCH 12 POE PORTS (D-Link) (D-LINK / DGS-1100) or equivalent with 24 numbers of of 10G SFP+ Port(Uplink) and number 1 of 100 G QSFP+ Port and power supply socket complete with brackets ,clamps tools and tackles as per approval by EIC

Supply and Installation of Fast Ethernet Unmanaged Switch Series-Switch 16 port poe (NETGEAR) (Netgear & FS116P)or equivalent with 16 numbers of of SFP+ Port(Uplink) and 1 number of 100 G QSFP+ Port and power supply socket complete with brackets ,clamps tools and tackles as per approval by EIC

Supply and Installation of AC3200 Nighthawk Tri-Band WiFi Router (Netgear.) (NETGEAR AC3200) or equivalent with complete with brackets ,clamps tools and tackles as per approval by EIC

Supply and Installation of SPECTRA Intel Core i7 7700 4 GB/ 1000 GB HDD/ Windows 10 Professional (SPECTRA) (Spectra SDT-i8000) or equivalent complete with brackets ,clamps tools and tackles as per approval by EIC

Supply and Installation of Genius-Digital Signage Software for Built In Media Player Display Panels (Genius) (Genius Supersign CMS) or equivalent capable of content preparation in 2 languages to be displayed on LED displays and screens upto 100 output devices as per approval by EIC

Supply and Installation of Matrix-Web based ACTA system (Matrix) (COSEC DOOR FOT with 200 TAM) or equivalent with WEB based biometric software, finger print scanning and 2 USB ports as per approval by EIC

Supply and Installation of floor mounted DIGITAL STANDY KIOSK (ADDSOFT) (ADDSOFT&ATINF) or equivalent with Storage/HDD (GB) : 250,Display Size (inches) : 55,Display Type : Color LCD touch Screen,Touch Type : Resistive,Screen Resolution (pixels) : 1920 x 1080 and 2 USB ports as per approval by EIC

Supply and Installation of sato 203 dpi Desktop Bar Code Printer (sato) (SATOArgoxSA408 with 2 year warranty) or equivalent of type : Desktop and Printing Technology : Thermal Transfer & Direct Thermal both with Resolution of min 203(dpi) and Print Speed (mm/sec.) : 127 and Maximum Print Width (mm) : 104as per approval by EIC

Supply and Installation of HP LaserJet Pro M12a with 1 year Warranty (hp) (HPLaserJet Pro M12a with 1 year Warranty) or equivalent with Composite Cartridge and mono Laser printing technology for paper size A4 and Print Speed 18 pages per minute as per as per approval by EIC

VARIABLE REFRIGERANT VOLUME SYSTEM SUPPLY , INSTALLATION, TESTING, COMMISSIONING & HANDING OVER OF THE FOLLOWING: Installation, testing & commissioning of R410 A, VRV/VRF outdoor units with hermetic scroll type and equipped with inverter/digital scroll capable of changing the speed in accordance/loading unloading according to the cooling load requirements per the specification with air cooled condenser coil, fan, inbuilt microprocessor, internal MCP protection, manual isolation of each compressor to stop the operation in case of failure of one compressor with voltage and surge protection device to protect the compressor as per the specification and as per the capacity below ACTUAL COOLING CAPACITY AT DESIGNED CONDITION OF 36 Deg C Ambient and 22 ± 2 Deg C indoor condition. The vendor must submit the supporting document for the unit capacity along with each compressor capacity as per the manual from the OEM. VRV 32 HP ( 16X2)

Supply, installation, testing & commissioning of DUCTABLE TYPE indoor unit as per the specification and as per the capacity below. The units must be rated as per specified indoor & outdoor condition & wherever required derating must be applied over strandrad ratings. (Refrigerant - R410a) 10 HP

Refnet joints

HVAC: Supply & installation of copper Refrigerant piping, duly insulated with closed cell elastomeric nitrile insulation of specified thickness& supported with MS tray type supports. Vendor to check the physical length of the pipe as per site condition as per the attached layout drawing .The exposed refrigeran pipes must be coverd with fiber glass cloth and UV shield coating for physical and mechanical protection. All the outdoor units will be located in the Terrace floor as shown in the drawing. Follow attached Schematic Refrigerant piping drawing for indoor to outdoor refrigerant pipe length and sizes, the Vendor has to reconfirm the refrigerant pipe sizes & length as per manufacturer requirement to arrive the estimation purpose. PVC Pipes must be provided above the insulation near the refrigerant support to avoid the mechanical / Physical damage. 28.6 mm OD (insulation = 19 mm)

25.4 mm OD (insulation = 13 mm thick)

22.2 mm OD (insulation = 13 mm)

19.1 mm OD (insulation = 13 mm)

15.9 mm OD (insulation = 13 mm)

12.7 mm OD (insulation = 13 mm)

MS Tray type support covered with 18 gauge GI sheet for all exposed copper pipes running outside the building

Supply & installation of rigid PVC drain piping and insulated with with 6mm thick insulation of closed cell elastometric nitrile rubber with density not less than 80kg/m3. 32 mm Dia

25 mm Dia

Supply & installation of control cum transmission wiring between ODU & IDU of copper (2 core X 1.5 sq mm) with conduits.

Supply & installation of Control cabling between each IDU & its wired remote (2core x 1.5 mm sq Cu.)

Supply & insatallation MS Stand type supports for ODU with necessary accessories as per specification following.

Chaarges towards gas charging for 32 HP

Supply of 2.0 TR capacity mitsubishi makeInverter type cassette A/C's 5 star rated

Supply of copper pipe with 13 mm insulation

Supply of cable 2.5 sqmm 4 c Poly cab make

Supply of PVC Drain 25 MM with insulation

Supply of condensing stands

KITCHEN EQUIPMENT SINGLE BURNER BULK COOKING RANGE 16 GA 304 SS Plain Top.Top secured to MS angle frame, It will be provided with high-pressure G-11 burner ( Brand: Standard) with N.C.V. Burner to rest on an SS strip of 16 GA and with necessary angle supports . 1 No. of removable 20 GA GI drip tray with strip handle to be provided. LPG Inlets on One sides rear bottom. MS TATA C Class SCH 40 ,1/2 Inch LPG Pipe .Rear & both sides 20 GA 304 SS cover with Air Vents.18 GA 304 SS Front Control Pannel. 450 x 450 x 50 mm Cast Iron removable heavy duty positioned above work top. 4 Nos of 16 GA 304 SS 40 mm Square pipe uprights and 4 Nos of 16 GA SS 38 mm Ø tubular legs with. adj.nylon bullet feet.Rear side legs inside 100mm for LPG Pipe line.

SS SINGLE BURNER COOKING RANGE Top Cover Made Out of 16G SS Sheet, Front Cover Made Out of 20G SS Sheet, Three Sides Cover Made Out of 20G SS Sheet With Air Vents (Lowering), 14"x14" Cast Iron Gratings , 1 noT-35 Burner, Needle Control Valve, Pig tail made out of Copper, Legs Made Out of 38x38x1.6mm Thk, With Nylon Adjustable Bullet Feet.

SS TWO BURNER COOKING RANGE constructed of SWG 16 SS on both sides with air vents. SWG 16 SS on top with front turned down and cut out to receive Heavy grating 2no. 14"X14" heavy duty cast iron removable vessel Rest .2 G-11 burner, SWG 20 SS spillage tray with SS strip handle. Manifold - ½ inch dia common for burners provided on both sides16 SWG, 40x40x1.6 SS tube legs with adjustable bullet feet.

SS THREE BURNER COOKING RANGE To be constructed of SWG 18 SS on both sides with air vents. 32X32X3 MS angular framework fully welded. SWG 16 SS on top with front turned down and cut out to receive three gratings. Three (3) nos. 300X300 heavy duty cast iron removable vessel rest. Three (3) nos. T-35 burners with individual pilot and controls. Three (3) nos. SWG 20 GI spillage tray with SS strip handle. Manifold - ½ inch dia common for both burners provided on both sides. 16 SWG , 4X40X16SWG SS pipe legs with adjustable bullet feet.

BULK FRYER Body to be constructed of SWG 18 (304) SS on both sides with air vents and front with control panel. 35X35X3 mm SS (202) angular framework fully welded. SWG 16 (304) SS on top with front turned down and cut out to receive 1 fryer bowl and a oil drip hole. Provide a receptacle for oil drip from top sheet. One nos. SS frier bowl. One T- 50 burner (1,00,000 btu/hr). Manifold - ½ inch dia provided on both sides. SWG 20 (304) SS spillage tray with SS strip handle. 16 SWG , 38mm dia SS pipe legs with adjustable bullet feet.

ROMALI ROTI BURNER WITH STAND constructed of SWG 16 SS on both sides with three side cover front side door . with16"dia MS Bandlli 4MM Thickness removable vessel Rest .1 G-11 burner, Manifold - ½ inch dia common for burnersprovided, 16 SWG, 40x40x1.6 SS tube legs with adjustable bullet feet.

DOSA PLATE Constructed of 16 SWG SS top with 150 mm high raised splash on rear, returned 25 mm & down 12 mm. down 50 mm worktop bull nosed. Worktop to over hang the base body by SWG 18 SS on all sides with air vents on both sides. On fully welded SS angle frame. Cooking top of 20 mm thick polished MS plate with 75 mm raised rear and side edges with grease collecting trough in front and grease collecting drawer. 2 no's V burners (40,000 btu/hr) with one pilot and control valve. 16 SWG 38mm dia SS pipe legs with adjustable nylon bullet

SS CHAPATHI PLATE WITH GRIDLLE16 SWG S.S top with 150 mm high raised splash on rear, returned 25 mm & down 12 mm. Both sides of top rolled down 50 mm flush with body cladding. Front of worktop bull nosed. Worktop to over hang the base body by 50mm from front and 75mm at rear. COOKING TOP - 20 mm thick polished S.S. plate with 75 mm raised rear and both sides edges with integral grease trough in front terminating into a S.S grease collecting slide out S.S drawer. HEATING - Two (2) Nos. 70,000 BTU's rated "V" type HI-PR burner of "United Make", or approved equal with control valve & pilot burner @ 5.0 P.S.I pressure, Control valve to be mounted on the front recessed panel cladding. Provide SS slide out drip tray in two equal halves sections with formed handle, Four No. S.S. legs square pipe uprights w/adjustable S.S. feet with S.S. welded pipe bottom shelf. Plate Size 30"X16" 16MM Thickness

STONE TOP SLAP TABLE / ONE UNDERSHELVES FOR CAPATHI 25 mm thick granite top on sitting on SWG 16 SS channel frame with SWG 12 SS corner pieces. SWG 18 SS shelf at 150 mm from FFL double beaded on all sides. 38 mm dia SWG 16 SS pipe legs with adjustable feet.

SS THREE BURNER CHINISE RANGE SWG 18 SS on both sides with air vents.SWG 16 SS on top with front turned down and cut out to receive three gratings. 35X35X35MS angular framework fully welded.One no. 400X400 heavy duty cast iron removable vessel rest and two nos. 425 mm dia heavy duty cast iron vessel rest. Three (3) nos. T-35 burners with individual pilot and controls. Three (3) nos, SWG 20 GI spillage tray with SS strip handle. Manifold -½ inch dia common for all burners provided on both sides. Four (4) nos SS legs with adjustable feet.

SS MOBILE SPICE TROLLEYThe unit should be like a table trolley designed with SWG 16 SS top, double beaded on all sides, secured to MS angle frame, with cut out to fit in inserts of 8 round containers to hold spices. Containers should of SS removable of size 150 mm dia and 150 mm deep with individual lids. Unit to be fitted with heavy duty noise free castors of 100 mm dia with two castors having locking facility. The trolley should have 25 mm dia SWG 16 SSS pipe handles on both sides. One undershelf of SWG 18 SSS at the bottom at 150 mm from FFL..

SS WORK TABLE WITH UNDERSHELVES Constructed of 16 SWG SS top, double beaded on all sides and secured to 38X38X3 mm MS angle welded framework. Top sheet to be sound deadend. One. 18 SWG SS bottom shelf, starting at 150 mm height and the next shelf at equidistance. Refer drawing for raised splash back. Four numbers SS tubular legs with adjustable bullet feet.

SS WORK TABLE WTH 1US 16 GA SS Top .Top secured to MS angle frame, 18 GA SS Under Shelf with 16G SS Channel Support 25x100x25mm, 4 Nos.16 GA SS Ø38 mm tubular legs with. adj.nylon bullet feet.

SOILED DISH LANDING TABLE WITH CHUTE - Constructed of 16 SWG SS top, double beaded on all sides and secured to welded SS angle frame. ½ inch raised marine edges. Waste chute - One no. 6 inch diameter with rubber edges on left (confirm with the drawing) hand side 175 mm from the side edges. 25 mm dia drain outlet on the left hand side corner connected to waste outlet with lever handle. Four numbers, SS tubular legs with adjustable bullet feet. Side and rear cross bracing support to give a clear front to move in waste bin under the table.

BAINE MARIE Constructed of 16 SWG SS top, double beaded on all sides and secured to welded SS angle frame, with cut out to fit in FOUR rectangular 1/1 and two 1/2 gastronom containers. Gastronom containers to be150 mm deep with lids. The tank of the baine marie should be provided with an online connection with a ball valve of 15 mm dia and a drain valve of 15 mm dia. 6 mm thick acrylic clear sneeze guard on top of the food counter at 600 mm height, resting on 25mm dia SWG 16 SS pipe upright and SS frame. SWG 18 SS sheet covering on three sides. 18 SWG ) SS bottom shelf starting at 150 mm. Thermostatically controlled 2KW heating element with rotary ON/OFF switch with light indicator on the side. Water sensor to be provided in the unit to prevent heating element getting damaged due to lack of water. The unit should have 2 mtr supply cord with industrial plug. Four numbers SS legs with adjustable bullet feet.

BAINE MARIE SIDE TABLEConstructed of 16 SWG (304) SS top, double beaded on all sides and secured to welded SS angle frame. SWG 18 (304) SS sheet covering on three sides. 18 SWG (304) SS bottom shelf starting at 150 mm and the next shelf at equidistant from the top. Four numbers SS legs with adjustable bullet feet. The tray rail should be made of 19 mm dia SS pipe with required support at equal intervals.

PICK UP COUNTER - UNDER COUNTER PLATE STORAGE IN FRONT / - TO BE USED FOR PICK UP) 16 SWG SS top, double beaded on all sides and secured to 38X38X3 MM MS angle welded framework. Top sheet to be sound deadend. . One, 18 SWG SS bottom shelf, starting at 150 mm height and the other in the middle. All three sides covered w. Four numbers, SS tubular legs with adjustable bullet feet. Overhead shelf at 600 mm height on four SS pipes.

SS CLEAN DISH RACK Unit to be provided with four (4) shelves, starting at 150 mm and then at equidistant, constructed with 38 mm dia SS pipe of 16 SWG 150mm Sheet frame under support. 18 SWG SS shelf double beaded on all sides. Four numbers SS legs with adjustable bullet feet.

SS POT RACK Unit to be provided with three (3) shelves, starting at 150 mm and then at equidistant, The uprights should be made of 32 mm dia SWG 16 SS pipe. The top sides of the uprights should be sealed and properly rounded. Shelves should be constructed with 25 mm dia SS pipe of 16 SWG with internal grid of 19 mm dia SS pipe at 100 mm spacing. Four numbers, 38 mm SWG 16 SS tubular legs with adjustable bullet feet.

PERFORATED STORAGE RACKS 4 SHELVES For VEGITABLES 4 Nos.18 GA SS Perforated Shelves with 16G SS Grade Channel Support 25x100x25mm( 3 Sides up beaded and front side down beaded) 4 Nos. 16 GA SS Grade Ø38 mm tubular legs with. adj.nylon bullet feet. The top sides of the uprights should be closed with SS round bush.

SS WORK TABLE WITH SINK Constructed of 16 SWG SS top, double beaded on all sides and secured to 38X38X3 mmMS angle welded framework. Bowl size 450X450X250 deep integral with top sheet - check the drawing for position of the bowl. In the center 50 mm dia BSP drain coupling,. Splash back 150 mm on rear / side.(AS PER DRAWING). 18 SWG ) SS bottom shelf starting at 150 mm. Four numbers SS tubular legs with adjustable bullet feet.

SS POT SINK Constructed of 16 SWG SS top, double beaded on all sides and secured to 32X32X3 mmMS angle welded framework. Bowl size 750X600X250 deep integral with top sheet - check the drawing for position of the bowl. In the center 50 mm dia BSP drain coupling,. Splash back 150 mm on rear / side.(AS PER DRAWING). 18 SWG ) SS bottom shelf starting at 150 mm. Four numbers SS tubular legs with adjustable

SS SINGLE SINK UNIT16 GA SS Sunken Top with Rear Splash.Top secured to MS angle frame, 16 GA SS Sink Size : 450mm x 450 mm x 300 mm deep., 4 Nos.16 GA SS Ø38 mm tubular legs with. adj.nylon bullet feet.

2 TANK SINK TABLE FOR VEGITABLE WASH Constructed of 16 SWG SS top, double beaded on all sides and secured to 35X35X3 mm MS angle welded framework. 2 sink of size 450 x 450 x 300 deep integral with top sheet with 38mm dia drain coupling. Four numbers SS tubular legs with adjustable bullet feet.

THREE SINK UNIT Constructed of 16 SWG SS top, double beaded on all sides and secured to 32X32X3 MS angle welded framework. Sink - Two (2) nos, Size 450X450X300 deep sink integral with top sheet on left side with 38mm dia drain coupling, hot and cold water faucet, deck mounted. Sterlising tank -One of size 450X450X350 deep, fitted with 38mm dia drain coupling and ball valve. Heating -U type thermostatically controlled heating element. 2 KW/ single phase. 150 mm splash back on the rear. Four number legs, with adjustable bullet feet.

DISH WASH EXIT TABLE Constructed of 16 SWG (304) SS top, double beaded on all sides and secured to 30X30X3 mm SS angle welded framework. Top sheet to be sound deadend. Fabricated to fit the standard dish wash rack movement.Four numbers, SS tubular legs with cross supports and adjustable bullet feet. 150 mm rear splash back wherever possible.

POTATO / ONION / COCONUT BIN Unit of 35X35X3 mm SS angle with 18 G SS mesh constuction. SS bin cover with handle and a sliding door at the bottom front for the stored item to be taken out. Four numbers heavy duty castors of 150 mm dia with rubber wheels. Two of the wheels with locking arrangement.

TANDOOR (CHARCOL) - The framework should be made of 25 x 25 SWG 14 boxed welded angles, and should be angle reinforced on all sides and bottom and intermediate positions. Exterior of base reinforced with heavy gauge MS inverted channel framework on all sides and suitable to fix castors. OUTER BODY-18 gauge SS Sheets with 25mm thk Mineral Wool insulation all around. INNER BODY - 1mm thk GI Sheets. POT - Earthen Pot (Suitable Size). ASH OUTLET - Provide Insulated door on hinges & latch(Size 6”x6” opening).

TANDORI WORK ONE UNDERSHELVES25 mm thick granite top sitting on SWG 16 SS channel frame with SWG 12 SS corner pieces. SWG 18 SS shelf at 150 mm from FFL double beaded on all sides. 38 mm dia SWG 16 SS pipe legs with adjustable feet.

SS WALL SHELVING Constructed of 16 SWG (304) SS top, double beaded on all sides and secured to 38X38X3 mm SS angle welded framework. Sink size 450X450X350 deep integral with top sheet - check the drawing for position of the Sink. In the center 50 mm dia BSP drain coupling, hot and cold water faucet, deck mounted. Splash back 150 mm on rear / side.(AS PER LAYOUT DRAWING). 18 SWG (304) SS bottom shelf starting at 150 mm. Four numbers SS tubular legs with adjustable bullet feet.

RICE COOKING STEAM VESSEL MODEL 35 kg Capicity (Single Jacketed): Bearing Block tilting mechanism, VESSELBODY : 14 SWG SS, LID : 1.6 SWG SS The unit mounted on SS 75x25x16SWG PIPE thick 'C' channels with brackets

Idly Work Table with 1 under Shelf:Made out of St. Steel, 18 Swg with 2 round containers & 1 under shelf. The unit is Fitted with all Fitting and Accessories Manufacturing with the help of CNC laser cutting M/C , CNC bending M/C and all corner joints are TIG welded, grinded and final five stage finish and matching to the Matt sheet finish

STEAM OPERATER SS 240 IDLY CAPACITY with flop door,3-side cover and bottom SS l'angle frame structure and SS L'angle made out of 1.6mm thick covering with ss sheet on bottom ,3-covering sheet made out of 20G thick ,top cover at center point to both side taper bend made out of 18G Thick ,Body to be constructed of SWG 18 SS, on a SS tubular stand. Steam inlet on one side. SS Steam control valves to be provided. Three number doors with rubber beading and locking facility. drip tary in the front. SS die pressed idli 3trays to steam idlis - total of240 idlis at a time.Provide additional set of Trays with the machine.Four numbers, SS tubular legs with adjustable bullet feet

Baking Trolley with SS Tray: Unit to be provided with respective Angle Supports, starting at 150 mm from the bottom and then at equal distant. Shelves should be constructed with 25 mm X 25mm angle of 16 GA . Each trolley will accommodate trays . 4 Nos. 32mm x 32mm 16 GA 304 SS tubular uprights with Dia 100 x 38mm Rubber tyre wheels. Swivel and brake to be on 2 wheels only.

SS WORK TOP CHILLERE 16 GA SS Top with Rear Splash.Top secured to SS angle frameBody shall be of full SSconstruction with interior and the exterior of 20 G SS The inner wall will be suitably insulated with PUF. It should have 2 doors, constructed of 18 G SS with a locking Facility.The unit will have 4 nos. anti corrosive wire shelves per door adjustable type. It should be fitted with digital temperature indicator, control switches and indicator lights.The equipment should be able to maintain a Temperature of -1˚C to +15˚C. The unit shall be provided with a SS drip tray and heating element. Forced draft cooling.The compressor make from Emerson Copeland.COMPRESSOR LOCATION AS PER DRAWING 4 Nos. 16 GA SS Ø50 mm tubular legs with. adj.nylon bullet feet. 1KW/16A/1∅ SUPPLY Ht @ 1350mm AFFL

4 DOOR VERTICAL REFRIGERATOR Unit shall be of full SS construction with interior and the exterior of 20 G SS 304. The inner wall will be suitably insulated with PUF 50mm thick. It should have 4 doors, constructed of 18 G SS and inner 20G SS. The doors should be provided with magnetic locking device and the unit will have adjustable perforated ( CTC 50mm ) intermediate shelves of 18 GA inside. It should be fitted with digital temperature indicator, control switches and indicator lights.The equipment should be able to maintain a t Temperature of +0˚C to +6˚C. . The unit shall be provided with a removable SS drip tray below. The compressor unit will be top mounted and should be of a reputed make from Emerson Copeland Four [4] Nos. 16 GA S.S 50 mm Ø tubular legs with. adj.nylon bullet feet. 150 mm clearance to be given from the floor. ELECTRICAL 1KW/16A/1∅ SUPPLY Ht @ 2100mm AFFL

16 GA SS Top with Rear Splash.Top secured to angle frame Unit shall be of full SS construction with interior and the exterior of 20 G SS The inner wall will be suitably insulated with PUF 50mm thick. It should have 4 doors, constructed of 18 G SS and inner 20G SS. The doors should be provided with magnetic locking device and the unit will have adjustable perforated ( CTC 50mm ) intermediate shelves of 18 GA inside. It should be fitted with digital temperature indicator, control switches and indicator lights.The equipment should be able to maintain a t Temperature of -0˚C to -5˚C. The unit shall be provided with a removable SS drip tray below. The compressor unit will be top mounted and should be of a reputed make from Emerson Copeland Four [4] Nos. 16 GA S.S 50 mm Ø tubular legs with. adj.nylon bullet feet. 150 mm clearance to be given from the floor. 1KW/16A/1∅ SUPPLY Ht @ 2100mm AFFL

MULTI PURPOSE SS 2 TIER TROLLEY /SS PLATE/ CUPS COLLECTION TROLLEY Three (2) tray type shelves of SWG 16 SS, to be reinforced with channels of SWG 16 SS. All three shelves to be equidistant. 32 mm dia SWG 16 SS pipes to extend on top as handle at 100 mm clear height from the top shelf.100 mm dia all swivel castor wheels.

Water Cooler: (100 Ltr Cap)Made out of St. Steel, inner and outer body with 100 Ltr water tank capacity. The unit will have 2 taps and water dip Tray.

INGREDIENT BINS WITH WHEELS (Cap:50 Kgs) Unit to be made of 18 GA SS body & hinded flip lid with handle. All ends shall be closed, welded, ground and polished smooth. 4 nos. Ø100 x 32 mm noise free rubber swivel type castors, castors fitted to channel frame work.

SS PALLET ( Low Height Work Table) 16 GA SS Ø32 mm S.S. tubular pipe bracings provided an all Sides.Internal grid of 16 GA SS Ø25 mm mm vertical postion pipe at 90 - 100 mm spacing. 16 GA SS Ø25 mm S.S. tubular pipe bracings provided at all Sides. 4 Nos. 16 GA SS 304 Grade Ø38 mm tubular legs with. adj.nylon bullet feet.

SS LOW PLATFORM TABLE 16 SWG (304) SS top, double beaded on all sides. SS tubular legs with S.S adjustable bullets.

PLATFORM TROLLEYS Unit to be constructed of SWG 16SS double beaded on all sides on 35X35X3 mm SS angle welded framework. SWG 16 SS, 1 ½ inch dia pipe handle fixed to body with SWG 14 SS angular support. Four numbers 150 mm dia all swivel heavy duty rubberized castors to take loads of 150 kgs. Two of the wheels to have locking arrangement. Rubber bumpers / guards.

SHAWARAMA 2 BURNER

Chicken Griller Machine 15 Birds

MULTI-UTILITY GRINDER Make: Cosmos, Model: CMG 20, Capacity: 20 LITRES The Drum, Motor housing, Frames are made of High Quality Stainless Steel, Detachable Cylindrical Granite Roller Stone Assembly The Roller Stone Assembly is fitted with wiper to ensure 100% grinding in quicker time, Unique adjustable Load Balancing System provided for even spread of load and for very efficient grinding ,Tilting system enables the drum to tilt and lock at 100 degree for easier and hygienic transfer of batter.

COCONUT SCRAPPER WITH STAND Make: Cosmos, Model: CS20 HD COSMOS - Floor Mounting Heavy Duty Coconut Scrapper with Stainless Steel Construction, SS Knife and SS Collection Support Guard. Rotation Direction is Clockwise. Fitted with 1/2 Hp heavy duty Motor, 220V, 1 Phase, 50 Hz.

Wetgrinder conventational model 10 ltr Full Stone- Conventional Type Capacity : 10 Ltrs / 7kgs Bed/Arm: Cast Iron Base Body/ Drum: SS18 SWG, SS Box of 20swg. SS Motor :1HP/440V/Starter: Crompton Greaves/LT/LK/Starter Finishing: Mirror reflection surface finishing.

POTATO MACHINE Made of high quality stainless steel drum and frame Strong and fine emery bonding applied on the rotating plate Ensures minimal wastage of vegetables Capacities available are 15 kgs with peeling time less than 3 minutes per batch

VEGETABLES CUTTING MACHINE HEAVY DUTY made from fully stainless steel with 6nos Imported Cutting Discs with Blade, fitted with 1 HP Single Phase Motor, 2 different types of Hopper for different kinds of Vegetables and Two different type Blades for different shape/ sizes cutting. Capacity 100 to 200Kg/hour

25Kg Dough kneding machine. CONSTRUCTION Dough kneading machine of cap.40Kgs. Including flour,water, oil and other ingredients fitted with three phase motor with V belt and V pulley with SS bowl and SS arm SPECIFICATION Model: uhe dk-10-50, Main Frame is made up of mild steel and painted, Fitted with belt guard made up of mild steel and Painted, Bowl and Blade made up Stainless steel, Moter & Gear Bos : Utsav Make, ELECTRICAL 1HP - 440V, Singel Phase / 3 Pahse ( Kirloskar motor )

SS HOOD WITH FILTTER Supplying, installation, testing of Exhaust Hood with oil grease filters, made of Stainless Steel Sheet Hood with SWG Thick SS Sheet grease filters hood Size . Including welding, grinding buffing, polishing and making curvature (when ever required) etc complete,

GI DICTUING – GI Sheet of Jindal / Tata / equivalent make, Made out of GI 22 / 24 SWG along with MS Flanges for blower inlet and outlet connection. Qtty mentioned is approximate for fresh air and exhaust ducting. Supply of air Grills, with VCD with fresh ai

BlOWERS WITH MOTORProviding, installation and testing of centrifugal Blower Direct driven by 5HP (LLS Model)1440RPM 2HP, ISI Make Motor best make of approved brand Kirloskar or Equivalent as per the direction of engineer-in-charge

BLOWER STAND

STARTER FOR EXAUST SYSTEM

GAS LINE Providing Fixing and testing of gas pipes 15MM dia ERW MS c Class Along With Necessary clamps and fitting such as bend tees etc, including necessary accessories needle valve, pinsets flexible pigtails( which includes Welding, Bending, Clamping, Painting with one coat of primer and one coat of eanamel and testing) etc., complete as per the direction of engineer-in-charge

MANIFOLD POINT

PROCUREMENT ITEMS Supply and installation of Codeleas wireless Microphone with a 40m operating range and frequency response range of 20-20,000 Hz. inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and installation of Auditorium Chair- 450mm(W)X800mm(H) with a backrest to floor height of 1050mm-seat with auto tip up mechanism with push back feature-Made of PU foam moulded with 15mm ±1mm thick plywood insert and upholstered with farbric-Made of PU foam moulded with 15mm ±1mm thick plywood insert and upholstered with farbric-inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of Wooden Writing Pad Chair-One Arm with xed Writing pad on one side other side open-no cushion on backrest-440mm(D)x900mm(H)x460(W)-The rate shall include all supporting brackets, anchor fasteners, screws, bolts, nuts etc.as required to the satisfaction of EIC

Supply and Installation of Revolving Chair (Stellar)-knee tilt synchronic with backrest symmetrical lumbar support and a PU foam covered with mesh fabric seat material-Leatherite Fabric back cover-890mm(H)x480mm(W)x550mm(D)-The rate shall include all supporting brackets, anchor fasteners, screws, bolts, nuts etc.as required to the satisfaction of EIC

Supply and installation of Godrej Ventilo High Back chair- PU foam covered with mesh fabric on the seat and a mesh fabric on the Back cover-backrest symmetrical lumber support-730MM(H)x480MM(W)x460MM(D)-The rate shall include all supporting brackets, anchor fasteners, screws, bolts, nuts etc.as required to the satisfaction of EIC

Supply and Installation of Office Visitor's chair-seat and backrest made of mouldede plywood with cantilever frame and without castors-made of hot pressed board-back cover made of polyester-890MM(H)X(580(D)X500(W)-The rate shall include all supporting brackets, anchor fasteners, screws, bolts, nuts etc.as required to the satisfaction of EIC

Supply and installation of SVC MD 77-Wooden Seat without Armrest and sear cushion-Frame Material:SS 202-450MM(H)x450MM(D)-all exposed wood to be polished-inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and installation of Height adjustable chair AC-revolving seat with a separate backrest-hydraulic height adjustment-pedestal base made of stainless steel-inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and installation of Cane round table with Four Chairs-Round Glass Top Table-Trapezium base with SS 304 understructure-750MM(H)-The rate shall include all supporting brackets, anchor fasteners, screws, bolts, nuts etc.as required to the satisfaction of EIC

Supply and Installation of Godrej Versatila 4 seater Round Table made of Prelam Board and Powder coated MS understructure- Teak laminate/ply with polish-900MM(L)X750MM(H)X25MM(D)-inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of 6 seater Rectangular Restaurant Table-Top made of Moulded PU and understructure of 2 vertical supports of Other wood-1100MM(L)x750MM(D)x750MM(H)-inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and instalaltion of Executive Office Table-Table top, gable end and modesty panel is Three layer Prelam Particle board with storage on both side-1500MM(L)X750MM(D)X775MM(H)-will be supplied Knocked Down To Be Assembled At Consignee Site By The Seller-The rate shall include all supporting brackets, anchor fasteners, screws, bolts, nuts etc.as required to the satisfaction of EIC

Supply and installation of Godrej Aristo Table-Table top material-MDF and venner with PU nish having scratch resistance of 2H. Gable end material- MDF and venner with PU nish having scratch resistance of 2H. Modesty Panel Material-MDF board as per IS: 12406 with pigmented PU coating on both sides-2100MM(L)X1200MM(D)X750MM(H)-The rate shall include all supporting brackets, anchor fasteners, screws, bolts, nuts etc.as required to the satisfaction of EIC

Supply and installation of AMPLIFIER TZA-2000 DP (S) JEET (ahuja)-6 Channel input with 12V phantom Power-inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of BOSE (PowerMatch® PM4500 / PM4500N congurable power amplier)-Analog-4 Channel-Signal to Noise Ratio of 102 dB-inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of Bosch-Dyncord-Digital Mixer-CMS2200-3-Digital-22 Channel Mixer-Signal to Noise Ratio of 80 dB-inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of Motorised Projection Screen-Support Digital Technology-1080p,3D and 4k with 4:3 aspect ratio-Wall Mounted-108"X144"-inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of Alkosign Acrylic Cover Notice Boards-made of Aluminium- Acrylic Front Cover material of board and GI sheet as Rear Panel material of board-with lockable front cover-1200mm(W)X1800mm(H) -inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of Alkosign Sliding Glass Cover Pin Boards-Aluminium Frame-Lockable Sliding Front Glass with MDF core-600mm(W)X900mm(H)-inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of LG 43 Wall Mounted Smart TV-1920x1080 pixels-2x5W speakers-inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of Microwave (LG)-23 L-Microwave heating power (Watt) 201-250-inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of LLOYD 255 L 3 Star Direct Cool Double Door Refrigerator-Direct Cool Technology-3 Star Rating inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of Sonodyne Stage Speaker-Stage Monitor-Passive Amplification with two way configuration-Ported Speaker- inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of Audio Feedback Suppressor (Bosch)- 22 Line Inputs and 2 Mic inputs- inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of Column Speakers(Ahuja)-Main Speaker with Passive Sound Amplifications with a 2 way configuration-Wall mounted ported speaker- inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of Sub Woofer Speaker (JBL)-Powered Speaker with a 1 way configuration-Omni Directional Coverage Pattern-Wall Mounted in a sealed enclosure-inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of Epson 2247U WUXGA 3LCD 4000Lumens Projector with WiFi and Miracast features-1920x1200 pixels-160% Optical Zoom- inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of White Board 4x10-Board Material- Ceramic Steel,Anodized extruded Aluminium alloy hollow section of designation Frame- with : Dry marker ink for white board- inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of Wooden Library Racks-Free Standing with Openable Doors with Wooden Panel made of:Three layer prelaminated particles board-2000MM(H)X915MM(W)X400MM(D)- inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of Flycatcher- Fluoroscent Lamp-80W Power Consumption-20W Lamp Wattage-with Catchment tray and Electrical & Grid Charge inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of Water Cooler SP 4040 (usha)-40L/Hr Cooling Capacity Litres/Hr-Stainless Steel Tank-inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of SS Push Bin 20 ltr-Non Perforated Stainless Steel with Swing Type Lid and Without Handle and Wheel- inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of Concertex Sofa-2-Two Seater Unit, 2-Single Seater unit, 1-Three Seater Unit, 1-Four Seater Unit, with foam Backrest and will be Fully Upholstered-inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of Godrej Interio Apo Single Sided Steel Bookrack with MDF Side Panel-2175MM(H)X900MM(W)X300MM(D)-5 shelves closed from sides only- inclusive of all tools and tackles as required to the satisfaction of the EIC

Supply and Installation of AKS Square Centre Table-1219mmX711mm-Teak Wood Frame-The rate shall include all supporting brackets, anchor fasteners, screws, bolts, nuts etc.as required to the satisfaction of EIC

Supply and Installation of Projector Screen Motorised 20'X15'-wall mounted-1080p-4:3 Aspect Ratio- inclusive of all tools and tackles as required to the satisfaction of the EIC

LIFT Installation, Testing, Commissioning and Maintenance of 12 Passenger Lifts 3Stops

Signages Retroreective ACP Sign Board (BHARTI) (Retroreective ACP Sign Board Size 16x4 ft WITH Acrilic Letter)

Sign Board TRIAD/ 3D Acrylic LED letter (NA) (TRIAD/ 3D Acrylic LED letter)

LED BOARD (Philips) (ITI LED LOGO) Size of Letter (Length x Wx thichness ) (inch x inch 18"x 3" Thickness of Letters(in mm) 3mm Material of Letter Base ACP Sheet.Material of LED letter Acrylic sheet

AV EQUIPMENT 1. JBL Stage Speakers LCR 3 Nos 2. JBL Surround Speakers 8 Nos 3. JBL 18” Subwoofer 2 Nos 4. Vivitek DLP Projector H1186 HD (3D) 1 No 5. 14’ Motorised screen 1 No 6. Studio Master 12 Channel Audio Mixer 1 No 7. Crown Amplifier 4 Nos 8. Denon AVR-x4400H 1 No 9. AKG handheld cordless microphone 1 No 10. DBX Drive Rack for speaker management 1 No 11. Equipment Rack prewired for Electronics 1 No

Add 12 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

M/S MADAN PRASAD