SPECIAL REPAIRS TO ROOF OF NS -19 AT MO(MB) GHATKOPAR UNDER GE(NW) BHNADUP

Amount

Dismantling asbestos cement (corrugated semicorrugated, etc) sheets in roof covering including ridge, north light curves etc complete all as specified and directed.

Taking down eaves gutter and rain water pipe ( any size and pattern) incl all fittings , headshoes,bends etc complete all as spd and directed.

S&F for Pre- Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping ,drilling of screws/suitable length GI 'J' or 'L' hooks in roof complete all as specified and directed.

S&F for Pre- Painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/rigdes, fixed with self tapping ,drilling of screws/suitable length GI 'J' or 'L' hooks in roof, including necessary scaffolding etc complete all as specified and directed.

s&f 1mm thick aluminium sheet in ridges and vally gutter,drip etc welded or soldered joints with grade of zink coating 275 and including necessary arrangementsfor leaking proof drop in to rainwater pipe 160m dia complete all as spd.

S&F 2mm fibre glass reinforced transulent corrugated sheeting of asimilar pattern as of PPGI sheet with two corrugation side lap fixed with coach screw GI J or L hook in roof complete all as spd.

S&F 160mm bore PVC rain water pipe single socketed ( ISI marked) any length with rubber ring joints complete fittings etc fixed towaal with MS clambs 8mm dia with two nuts wall nails etc complete all as spd.

Dismantling wrought iron or mild steel work of vally gutter and expanded metal any description not otherwise provided for complete all as spd and directed.

S&F for roof trusses (framed) trussed, Purlins, crane gantries, rails and fastenings and heavy brackets framing(Beam, Angle, Channel or flat section,plain plates) including distance pieces, cleats ,welding and braceing etc,Fe-410W(Gde-E-250)quality -B, including necessary scaffolding etc complete all as specified and directed.

S & F Mild steel Angles, bars, flats ,plane angle cleats for securing to vallay gutter supports, wall ties,securing purlins J or L hook clamps with nut bolts,washers and similar small articles confirming to Fe 290 or Gde-E165 complete all as specified and directed.

Taking down cement or cement lime mortar plaster, any description on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 on brick walls, RCC pillars, beams, purlins etc and finishing the surface even and smooth complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces in two coats (10 + 5 mm), both coat mixed with integral water proofing compound ISI Marked @ 2% by the weight of cement and finishing the surface even and fair complete all as specified and directed Note - WPC shall be measured and paid separately

Supply only integral water proofing compound.

M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed

M&L for preparation of old decorated surfaces and applying one coat of white wash on wall, coloums, beams etc complete all as specified and directed..

M&L for preparation of new plastered surfaces on walls, chajjas,filling of hair line cracks with white cement and applying two coats of 100% anti fungal weather resistant acrylic paint over a coat of acrylic primer in approved shade and as per manufacturer's instructions including necessary scaffolding complete all as specified and as directed.

M&L for complete removal of existing treatment on walls including washing down, rubbing down and applying antifungal treatement as required and applying two coats of 100% acrylic emulsion paint over a coat of primer as specified and directed by Engr-in-Charge

M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide etc complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description, not other wise described, over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old decorated steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F turbine Air Ventilator dia 700mm, height 421 mm, Neck/Throat dia 530mm / 710mm. Top cone MOC & Grade Stainless Steel 304, Dia 460mm, No of fins 36, thickness 0.5 mm and Neck/bottom ring of shaft Dia 525mm width 120mm, Shaft MOC 19mm dia SS, Drive mechanism SS boll supporting brush MOC matlon, FRP base with dome MOC & grade 450 Imerson, sheet size 1050mm x 1800mm, Hood size 530 mm, opening at bottom base 900mm x 600mm, Exhaust capacity 1900 CFM, Net weight / Gross weight 8 Kg / 14 Kg and including necessary fixing arrangement, scaffolding etc, complete all as specified and directed.

Deduct Credit for Demolished/ Dismantled material Rs. (-) 1,11,340.00 (Minus) as listed in Schedule of Credit Note: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

GAJANAN SALES CORPORATION

Maaz Construction

Star Construction Co.

S K ENTERPRISES

Vishal Builders

Super Construction

SB CONSTRUCTION

GRAND SERVICES