Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹53.2 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹58.3 L+₹5.1 L (9.54%)Rejected-Finance | L2 | Rejected-Finance Other Than L1 Bidder | |
| 3 | L3₹63.7 L+₹10.5 L (19.8%)Rejected-Finance | L3 | Rejected-Finance Other Than L1 Bidder | |
| 4 | L4₹73.7 L+₹20.5 L (38.6%)Rejected-Finance | L4 | Rejected-Finance Other Than L1 Bidder | |
| 5 | Rejected-Technical NATIONAL HIGHWAY KUNJWANI JAMMU KUNJWANI JAMMU JAMMU KASHMIR 180012 UDYAM JK 07 0012082 | JAMMU | JAMMU AND KASHMIR | 180012 | - | Rejected-Technical Not recommended being unenlisted due to change in constituion Firm not renewed by HQ CE NC and original documents not received and police verification of both partners not uploaded |
Tender Value
₹74 L
EMD Value
₹1.4 L
Closing Date
9 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Cdr, HQ 138 WE
HQ 138 Works Engineers PIN-914138 C/O 56 APO
REPAIR/ MAINT AND POLISHING OF WOODEN FURNITURE AT BSO YARD UNDER GE 865 EWS
2023_MES_612402_1
138WE/L-45/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE 865 EWS
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
GE 865 EWS
₹1.4 L
Yes
13 Feb 2024
5 Aug 2023
16 Sept 2023
5 Aug 2023
9 Sept 2023
26 Aug 2023
Amount
REPAIR TO CHAIR WRITING (FD-280,FD-202,FD-20) Opening of joints of damaged/broken member of chair writing where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface etc, complete all as specified & directed by Engr- in- Charge. (a) S&F front leg (left or right ) made out with Ist class HW seasoned teak wood of size and shape as per existing chair or as per Drg including polishing new parts with french polish , complete all as specified & directed by Engr- in- Charge.
All as per Srl item No 1 here-in-before but rear leg (left or right) , complete all as specified & directed by Engr- in- Charge.
All as per Srl item No 1 here-in-before, but of front/rear/side members of seat bottom, , complete all as specified & directed by Engr- in- Charge.
All as per Srl item No 1 here-in-before, but back Stiffener, , complete all as specified & directed by Engr- in- Charge.
All as per Srl item No 1 here-in-before, but bottom stiffener, , complete all as specified & directed by Engr- in- Charge.
S&F front Arms rest made out with Ist class HW seasoned teak wood of size and shape as per existing chair or as per Drg, complete all as specified & directed by Engr- in- Charge.
Description All as per Srl item No 1 here-in-before, but replacement of shoes with new PVC shoe of superior quality with steel plated screws of suitable size , complete all as specified & directed by Engr- in- Charge.
Re canning of chair writing, complete all as specified & directed by Engr- in- Charge.
M&L for preparation of wooden surface of Chair writing by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade , complete all as specified & directed by Engr- in- Charge.
REPAIR TO CHAIR DINNING FD-279, FD-228, FD-1105 Opening of joints of damaged/broken member of Chair Dinning where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface etc, complete all as specified & directed by Engr- in- Charge. (a) S&F front leg (left or right ) made out with Ist class HW seasoned seesham wood of size and shape as per existing chair , complete all as specified & directed by Engr- in- Charge.
All as per Srl item No 10 here-in-before, but rear leg (left or right), , complete all as specified & directed by Engr- in- Charge.
All as per Srl item No 10 here-in-before, but S&F of Front/Rear/Side rail of Chair Dinning , complete all as specified & directed by Engr- in- Charge.
All as per Srl item No 10 here-in-before, but back members of Chair Dinning, , complete all as specified & directed by Engr- in- Charge.
All as per Srl item No 10 here-in-before, but bottom stiffener, , complete all as specified & directed by Engr- in- Charge.
Description All as per Srl item No 10 here-in-before, but replacement of rubber shoes with new PVC shoe of superior quality with steel plated screws of suitable size, complete all as specified & directed by Engr- in- Charge.
Re-canning of chair dining, complete all as specified & directed by Engr- in- Charge.
M&L for preparation of wooden surface of Chair dining by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade , complete all as specified & directed by Engr- in- Charge.
REPAIRING TO CHAIR EASY (FD- 229,FD-1108) Opening of joints of damaged/broken member of Chair Easy where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface etc, complete all as specified & directed by Engr- in- Charge. (a) Re-canning of chair easy
S&F front leg (left or right ) made out with Ist class HW seasoned teak wood of size and shape, complete all as specified & directed by Engr- in- Charge.
All as per Srl item No 18 here-in-before, but Rear leg (left and right), complete all as specified & directed by Engr- in- Charge.
All as per Srl item No 18 here-in-before, but Arms rest, complete all as specified & directed by Engr- in- Charge.
All as per Srl item No 18 here-in-before, but bottom stiffner, complete all as specified & directed by Engr- in- Charge.
Description all as per Srl item No 18 here-in-before, but replacement of shoes with new PVC shoe of superior quality with steel plated screws of suitable size , complete all as specified & directed by Engr- in- Charge.
M&L for preparation of wooden surface of chair easy by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade, complete all as specified & directed by Engr- in- Charge.
TABLE 900 X 600 WITH / WITHOUT DRAWER (FD-283/284/TP) Repair of table with or w/o drawer for replacement of unserviceable top with commercial particle board BWR type Gde-I 18/19mm thick as per Drg of ISI Marked with Ist class HW teak wood beading 6mm thick including polishing (two or more coats over a coat of wood filler etc), complete all as specified & directed by Engr- in- Charge.
Description all as per item Ser No 25 here in before but replacement of table frames long rail with S&F new table frames long rail made out of Ist class hard wood (Teak Wood) complete all as specified & directed by Engr- in- Charge.
Description all as per item Ser No 25 here in before but replacement of new drawer made out of Ist class hard wood with aluminium anodized 35mm/40mm dia knob, complete all as specified & directed by Engr- in- Charge.
Description all as per item Ser No 25 here in before but replacement of table frames short rail with S&F new table frames short rail made out of Ist class hard wood , complete all as specified & directed by Engr- in- Charge.
Description all as per item 25 here in before but replacement of bottom centre stiffener with S&F new bottom centre stiffener , complete all as specified & directed by Engr- in- Charge.
Description all as per item 25 here in before but replacement of new aluminium anodized 35mm/40mm dia knob , complete all as specified & directed by Engr- in- Charge.
Description all as per item 25 here in before but replacement of rubber shoes with S & F new rubber shoe of superior quality with steel plated screws of suitable size , complete all as specified & directed by Engr- in- Charge.
Supply and fixing in repair new legs made out with Ist class HW as per existing or as per Drg polishing with French polish (two or more coats) over a coat of wood filler after preparation of surface etc, complete all as specified & directed by Engr- in- Charge.
M&L for preparation of wooden surface of table 900 x600 with/without drawer by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade , complete all as specified & directed by Engr- in- Charge.
TABLE WRITING (F-275) Removing old unserviceable top and S&F new tops made of particle board 19mm thick commercial BWR Gde I of the size and shape a per Drg of Make-Archid/Novapan /Greenply /Kitply ISI Marked with Ist class HW teak wood beading 6mm thick polishing with french polish (two or more coats) over a coat of wood filler etc, complete all as specified & directed by Engr- in- Charge.
Removing of old unserviceable back ply of table writing and S&F new back of 6mm thick ply wood commercial type as per existing shape and size complete all as specified & directed by Engr- in- Charge.
Removing of old unserviceable bottom stiffner of table writing and S&F new bottom stiffner of size 50 x 25 mm thick made out of Ist class HW as per existing shape and size complete all as specified & directed by Engr- in- Charge.
Opening joints removing old unserviceable legs of tables & S&F new legs made out with Ist class HW seasoned wood all as per Drg or of exsiting pattern polishing with french polish (two or more coats) over a coat of wood filler etc, complete all as specified & directed by Engr- in- Charge.
M&L for preparation of wooden surface of table writing by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade complete all as specified & directed by Engr- in- Charge.
REPAIR TO TEAPOY WOODEN (FD-278) Removing unserviceable top of teapoys/Teapoy FD and S&F new tops of 19mm thick particle board BWR type Gde-I as per Drg ISI Marked and polishing with French polish (two or more coats) over a coat of wood filler etc, complete all as specified & directed by Engr- in- Charge.
Removing unserviceable/broken stiffener/long rail /side rails of teapoys & S&F new stiffener/long rail /side rails made of Ist class HW all as per Drg or existing pattern polishing with french polish (two or more coats) over a coat of wood filler after preparation of surface etc, complete all as specified & directed by Engr- in- Charge.
Removing unserviceable legs of teapoys and S&F new legs made of Ist class HW all as per Drg or existing pattern polishing with french polish (two or more coats) over a coat of wood filler after preparation of surface etc, complete all as specified & directed by Engr- in- Charge.
M&L for preparation of wooden surface of teapoy wooden by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade complete all as specified & directed by Engr- in- Charge.
REPAIR TO PEG TABLE (FD-277) Removing unserviceable top of Peg table and S&F new tops of 19mm thick particle board BWR type Gde-I as per Drg ISI Marked and polishing with French polish (two or more coats) over a coat of wood filler etc, complete all as specified & directed by Engr- in- Charge.
Removing unserviceable/broken legs of peg table and S&F new legs made of Ist class HW Seasoned teak wood all as per Drg or existing pattern and polishing with french polish (Two or more coats) over acoat of wood filler after preparation of surface etc, complete all as specified & directed by Engr- in- Charge.
Taking out old unserviceable/broken long rail of frame any size and S&F new rail of Ist class HW (Teak wood ) planned & finishing smooth of existing shape and size complete all as specified & directed by Engr- in- Charge.
Description all as per Item Ser No 45 above but short rail, complete all as specified & directed by Engr- in- Charge.
M&L for preparation of wooden surface of table peg by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade complete all as specified & directed by Engr- in- Charge.
REPAIR TO SIDE BOARD (FD-241) Removal of old unserviceable/broken existing back of side board and S&F new back ply of 6 mm thick commercial plywood of existing size complete all as specified & directed by Engr- in- Charge.
Removal of old unserviceable/broken existing legs and S&F new legs of Ist class H.W (Shaisham)of existing shape and size complete all as specified & directed by Engr- in- Charge.
Removal of old unserviceable/broken existing long rail and S&F new long rails of Ist class H.W teak existing shape and size duly planned and smooth complete all as specified & directed by Engr- in- Charge.
Description all as per item Ser No 50 here- in-before but short rail complete all as specified & directed by Engr- in- Charge.
Removal of old unserviceable/broken side of side board and S&F new side of 18/19mm thick particle board BWR interior grade as per existing shape and size including 1mm thick sunmica sheet to external surface of particle board of side board complete all as specified & directed by Engr- in- Charge.
Removal of old unserviceable/broken existing partition and S&F new partition of Ist class H.W (teak wood) existing shape and size duly planned and smooth complete all as specified & directed by Engr- in- Charge.
Removal of old unserviceable/broken shelf of side board and S&F new shelf of Ist class H.W (teak wood) existing shape and size duly planned and smooth complete all as specified & directed by Engr- in- Charge.
Removal of old unserviceable/broken top of 18/19mm thick particle board as per existing shape and size including 1 mm thick sunmica sheet to external surface of particle board, complete all as specified & directed by Engr- in- Charge.
Removal of old unserviceable/broken existing drawer of side board and S&F new drawer of Ist class hard wood (Teak wood ) of existing shape and size ( 7 inch x 15 inch x 0.5 inch) duly planned and smooth complete all as specified & directed by Engr- in- Charge.
M&L for preparation of wooden surface of side board by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade complete all as specified & directed by Engr- in- Charge.
REPAIR TO TABLE 900 X 900 X 760MM (FD-291) Removing of old unserviceable table top and provision of new table top made of pr-laminated particle board 18/19mm thick BWR, interior grade ISI Marked including 4 mm thick teak wood beading all round the table top complete all as specified & directed by Engr- in- Charge.
Removing of old unserviceable leg and S&F new leg of existing shape and size Ist class hard wood (Teak wood) and fixing complete all as specified & directed by Engr- in- Charge.
Removing of old unserviceable rail and S&F new rail of existing shape and size Ist class hard wood and fixing complete all as specified & directed by Engr- in- Charge.
S & F Ist class hard wood teak bracket 75mm x 75mm x 25mm triangular( 08 nos in a table) fixed with suitable size with screws complete all as specified & directed by Engr- in- Charge.
M&L for preparation of wooden surface of table 900mm x900mm x760mm by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade complete all as specified & directed by Engr- in- Charge.
REPAIR TO TABLE DRESSING GENTS (FD-230, FD379) Dismantling taking out carefully and replacement of old existing broken top of table dressing gents of any description in any position & replacement of the same with S&F new top of 01mm thick laminated sheet of approved shade over particle board 12mm thick and including 6mm thick teak wood beading all round made to shape fixed in position pasted with 01mm thick laminated sheet on top complete all as specified & directed by Engr- in- Charge.
All as per item No 63 above but replacement of side S&F new side of 12 mm thick particle board, one side teak veneered and other side commercial exterior grade BWP with and including 6mm thick teak wood beading all-round , made to shape fixed in position all as shown on drg, complete all as specified & directed by Engr- in- Charge.
All as per item No 63 above but replacement of bottom with S&F new 12 mm thick ply, teak veneered on one side and commercial on other side grade with (BWR Resin) made to shape fixed in position complete all as specified & directed by Engr- in- Charge.
All as per item No 63 above but replacement of mirror of size 380 x 760 x 5.5mm thick of Saint Gobain/Modiguard/Atul with teak wood frame, complete all as specified & directed by Engr- in- Charge.
Description all as per item No. 63 here-in-before but replacement of chromium plate knob 25 mm dia of best quality complete all as specified & directed by Engr- in- Charge.
M&L for preparation of wooden surface of table dressing gents by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade complete all as specified & directed by Engr- in- Charge.
REPAIR TO TABLE BED SIDE (FD-276) Taking down old U/S side of table bed side and S&F new sides of 18/19 mm thick pre-laminated particle board exterior grade SI marked as per existing shape and size complete all as specified & directed by Engr- in- Charge.
Description all as per item No 69 here-in-above but shelf, complete all as specified & directed by Engr- in- Charge
Description down old U/S back of table bed side and S&F new back of 6mm thick ply wood commercial BWR with required size of screw complete all as specified & directed by Engr- in- Charge
Description all as per item No 69 here-in-above but Top of Table Bed Side complete all as specified & directed by Engr- in- Charge
M&L for preparation of wooden surface of table bed side by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade complete all as specified & directed by Engr- in- Charge
REPAIR TO TABLE CENTRE WITH SUNMICA TOP/ TABLE CENTRE 2 TIER (FD-235, FD274, FD375) Taking down old U/S top of table centre with sunmica top/ Table centre two tier and S&F new top of table centre with sunmica top made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the complete all as specified & directed by Engr- in- Charge
Removing of old unserviceable long rail of Table Centre / Table centre two tier & S&F of long rail made as per existing size and shape or as per Drg Ist class HW seasoned (teak wood ) incl polishing two or more coats of over a coat of wood filler after preparation of surface, complete all as specified & directed by Engr- in- Charge
Removing of old unserviceable side rail of Table Centre / Table centre two tier & S&F of new side rail made as per existing size and shape or as per Drg Ist class HW seasoned teak wood incl polishing two or more coats of over a coat of wood filler after preparation of surface, complete all as specified & directed by Engr- in- Charge
Removing of old unserviceable leg of Table Centre / Table centre two tier & S&F of new leg made as per existing size and shape or as per Drg Ist class HW seasoned (teak wood ) incl polishing two or more coats of over a coat of wood filler after preparation of surface, complete all as specified & directed by Engr- in- Charge
Taking down old U/S bottom tier of table centre two tier and S&F new bottom tier of table centre two tier with sunmica top made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top complete all as specified & directed by Engr- in- Charge
M&L for preparation of wooden surface of table centre with sunmica top/ table centre 2 tier by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade complete all as specified & directed by Engr- in- Charge
BED PLYWOOD TOP (FD-246) Removing of old unserviceable head rest of bed and S&F new back rest as per existing size and shape of Ist class HW seasoned teak wood incl polishing (two or more coats) over a coat of wood filler after preparation of surface, complete all as specified & directed by Engr- in- Charge.
Removing of old unserviceable foot rest of bed & S&F of foot rest made as per existing size and shape or as per Drg Ist class HW seasoned (teak wood ) incl polishing two or more coats of over a coat of wood filler after preparation of surface, complete all as specified & directed by Engr- in- Charge.
Removing of old ply top and S&F new ply top of 12mm thick commercial type ISI marked all as shown in Drg, complete all as specified & directed by Engr- in- Charge.
Removal of old wooden stiffeners and S&F Ist class Hard wood stiffeners of size 50x60mm suitable for bed all as shown in Drg incl polishing two or more coats of wood filler after preparation of surface etc, complete all as specified & directed by Engr- in- Charge.
Taking out old unsv long rail of bed plywood and providing of new long rail of Ist class HW (shesham) of existing shape and size all as specified and Drg incl polishing two or more coats over a coat of wood filler after preparation of surface etc, complete all as specified & directed by Engr- in- Charge.
M&L for preparation of wooden surface of bed ply top by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade complete all as specified & directed by Engr- in- Charge.
REPAIR TO TABLE DINING 6/8 PERS (FD-273) Taking out old unsv top from table dining 6 pers and supply new top of 18/19 mm thick veneered particle board solid core type (1 phase teak veneered particle board solid core type & other side commercial veneered) exterior grade and provided teak wood beading 6 mm thick around fixed with suitable size of steel screw and applying two coat of French polish with touch wood brand polish and fixing the same complete all as specified & directed by Engr- in- Charge.
Description all as per item No 86 here in before but Tabel Dining 8 Pers, complete all as specified & directed by Engr- in- Charge.
Taking out old unsv legs from table dining 6/8 pers and S&F new legs of teak wood , complete all as specified & directed by Engr- in- Charge.
Taking out old unsv long rail from table dining 6/8 pers and S&F new long rail of teak wood , complete all as specified & directed by Engr- in- Charge.
Taking out old unsv short rail from table dining 6/8 pers and S&F new short rail of teak wood , complete all as specified & directed by Engr- in- Charge.
M&L for preparation of wooden surface table dining 6/8 pers by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade complete all as specified & directed by Engr- in- Charge.
CHAIR DINNING LONG BACK (FD-357) Removing of old unservicebale rear legs with back and S&F of new rear legs with back of seasoned teak wood all as per drg, complete all as specified & directed by Engr- in- Charge.
All as per srl item No 92 above but front leg, complete all as specified & directed by Engr- in- Charge.
All as per srl item No 92 above but rails, complete all as specified & directed by Engr- in- Charge.
Removing of old tapestry cloth and foam of cushion for both seat and back of chair and S&F (upholstery) of new tapestry cloth & foam of cushion sleepwell make 75mm thick & 50 thick of 32 density for seat and back, complete all as specified & directed by Engr- in- Charge.
M&L for preparation of wooden surface of chair dining long back by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade, complete all as specified & directed by Engr- in- Charge.
REPAIR TO CHAIR EASY CUSHIONED (FD-358) Removing of old unserviceable front/ side/ back rails and S&F new front/ side / back rails seasoned teak wood , complete all as specified & directed by Engr- in- Charge.
Removing of old unserviceable legs and S&F new legs seasoned teak wood, complete all as specified & directed by Engr- in- Charge.
Removing of old unserviceable arms and S&F new arms of seasoned teak wood , complete all as specified & directed by Engr- in- Charge.
Removing of old unserviceable foam cushion from chair easy cushioned and S&F new foam cushion of 75mm thick & 50 thick of 32 density for seat and back respectively make SLEEPWELL fixed over wooden frame covered with tapestry cloth not less than Rs 300/- per mtr as approvedby, complete all as specified & directed by Engr- in- Charge.
M&L for preparation of wooden surface of chair eay cushioned by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade, complete all as specified & directed by Engr- in- Charge.
REPAIR TO TABLE 600 x600 x760MM (FD-293) Taking down old U/S top of table 600 x600 x760mm and S&F new top of table 600 x600x 760mm made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top , complete all as specified & directed by Engr- in- Charge.
Removing of old unserviceable side rail of Table 600x 600 x760mm & S&F of side rail made as per existing size and shape or as per Drg Ist class HW seasoned (teak wood ) incl polishing two or more coats of over a coat of wood filler after preparation of surface, complete all as specified & directed by Engr- in- Charge.
Taking out old unsv legs from table 600 x600 x760mm and S&F new legs of teak wood , complete all as specified & directed by Engr- in- Charge.
M&L for preparation of wooden surface by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade, complete all as specified & directed by Engr- in- Charge.
TABLE COMPUTER (FD/E6/MAP/03) Taking down old U/S top of table computer and S&F new top of table computer made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specified, complete all as specified & directed by Engr- in- Charge.
Taking down old U/S telescopic channel of pull out tray, drawer and key board tray of table computer and S&F new telescopic channel for pull out tray, drawer and key board tray of table computer , complete all as specified & directed by Engr- in- Charge.
Taking down old U/S pull out tray of table computer and S &F new pull out tray made of 18/19 mm thick pre-laminated particle board of existing size, complete all as specified & directed by Engr- in- Charge.
Taking down old U/S drawer 75mm deep of table computer and S &F new drawer 75mm deep of existing size , complete all as specified & directed by Engr- in- Charge.
Taking down old U/S key board tray of table computer and S &F new key board tray of existing size, complete all as specified & directed by Engr- in- Charge.
Taking down old U/S middle shelf of table computer and S &F new middle shelf of existing size , complete all as specified & directed by Engr- in- Charge.
Taking down old U/S bottom shelf of table computer and S &F new bottom shelf of existing size, complete all as specified & directed by Engr- in- Charge.
Taking down old U/S side pannel of table computer and S &F new side pannel of existing size , complete all as specified & directed by Engr- in- Charge.
M&L for scrubbing and derusting and applying one coat of primer and over it two coat of synthetic enamel paint (spray painting) incl preparation of surface , complete all as specified & directed by Engr- in- Charge.
Taking down old U/S rect PVC cover of table computer and S &F new 25 x50mm rect PVC cover of existing size made to shape , complete all as specified & directed by Engr- in- Charge.
Taking down old U/S nylon buffer from the leg of table computer and S &F new nylon buffer of existing size , complete all as specified & directed by Engr- in- Charge.
TABLE CENTRE 16'' X 30'' X 21'' WITH GLASS TOP (TP) Taking down old U/S top of table centre with glass top and S&F new top of table centre with glass top of 10mm thick palte tinted glass ( white colour) 0f 1200mm x900mm with cornor rounded, the edges of top of table should be rounded off as specified, including 04 nos of vacuum rubber rubber for fixiing with frame , complete all as specified & directed by Engr- in- Charge.
M&L for preparation of wooden surface by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade , complete all as specified & directed by Engr- in- Charge.
MIRROR WITH SHELF (FD-52(M) Taking out old U/S looking Mirror of mirror with shelf and S &F new mirror of existing size (355 x455 x5.5mm ) with teak wood frame of 25mm x19mm and 6mm thick ply wood back incl key plate of 40mm x 25mm x3mm rest , complete all as specified & directed by Engr- in- Charge.
Taking out old U/S shelf and S & F new shelf made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top , complete all as specified & directed by Engr- in- Charge.
REPAIR TO CHAIR DINING (MAP with Cushion) (FD/MAP-II/04) Opening of joints of damaged/ broken member of chair dining (MAP with cushion) where required for replacement including removing seat fabric on 12 mm plywood if necessary, polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface etc. (a) S&F front leg (left or right ) made out with Ist class HW seasoned Teak wood of size and shape as per existing chair , complete all as specified & directed by Engr- in- Charge.
All as per item No 121 here in above but rear leg (left or right), , complete all as specified & directed by Engr- in- Charge.
All as per item No 121 here in above but Front/Rear/Side members of seat, , complete all as specified & directed by Engr- in- Charge.
All as per item No 121 here in above but stiffeners of chair dining, , complete all as specified & directed by Engr- in- Charge.
All as per item No 121 here in above but 15 x30mm TW vertical strip of chair dining (MAP with cushion) , complete all as specified & directed by Engr- in- Charge.
Replacement of rubber shoes with S & F new rubber shoe of superior quality with steel plated screws of suitable size, complete all as specified & directed by Engr- in- Charge.
Removing of existing U/S cushion from bottom seat of chair dining (MAP with Cushion) and S&F new foam cushion Make-sleepwell/Godrej, 75 mm thick 40 density duly covered with superior quality tapestry cloth as approved by GE (Not less than 350/P Mtr) with fabric on seat of 12mm thick plywood , complete all as specified & directed by Engr- in- Charge.
M&L for preparation of wooden surface of chair dining long back by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade , complete all as specified & directed by Engr- in- Charge.
MEAT SAFE AND MILK LARGE/SMALL WITH MARBLE TOP (FD-370/369) Removing of old unservicebale leg of meat safe and milk large /small and S&F of new legs of seasoned teak wood , complete all as specified & directed by Engr- in- Charge.
All as per item No 129 here in above but wire gauge shutter with CP piano hings and steel chromium plated knobs shall be provided to each shutter and Ist class HW seasoned Teak wood of size and shape as per existing meat safe and milk large/smal , complete all as specified & directed by Engr- in- Charge.
Removing of old unserviceable back ply of meat safe and milk large / small and S&F new back of 6mm thick ply wood commercial type as per existing shape and size , complete all as specified & directed by Engr- in- Charge.
Removing of old unserviceable wire gauge both side of meat safe and milk large/small and S&F of new wire gauge to both side of meat safe and milk large/small, , complete all as specified & directed by Engr- in- Charge.
Removing of old unserviceable/broken marble of meat safe and milk large and S&F of new marble of existing size but 18 to 20mm thick polished white Makrana marble stone sla (machine cut) , complete all as specified & directed by Engr- in- Charge.
All as per item No 129 here in above but meat safe and milk small, complete all as specified & directed by Engr- in- Charge.
M&L for preparation of wooden surface of meat safe and mik large/small by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade , complete all as specified & directed by Engr- in- Charge.
TABLE 1200 x1200 x760MM Removing of old unserviceable table top and provision of new table top made of pr-laminated particle board 18/19mm thick BWR, interior grade Make-Archid/Novapan /Greenply /Kitply ISI Marked including 4 mm thick teak wood beading all round the table top , complete all as specified & directed by Engr- in- Charge.
Taking out old unsv legs from table 1200 x1200 x760mm and S&F new legs of teak wood 60mm x 60mm in section , complete all as specified & directed by Engr- in- Charge.
Taking out old unsv rail from table1200 x1200 x760mm and S&F new long rail of teak wood , complete all as specified & directed by Engr- in- Charge.
Removing of old unserviceable bottom stiffner of table 1200 x 1200 760mm and S&F new bottom stiffner of size 50 x 25 mm thick made out of Ist class HW as per existing shape and size, complete all as specified & directed by Engr- in- Charge.
M&L for preparation of wooden surface table1200 x1200 x760mm by scrubbing with grit paper to smoothen the surface and apply one or more coat of French polish of required shade, complete all as specified & directed by Engr- in- Charge.
M&L preparation of old wooden surfaces and applying one or more coat of French polish of required shade complete all as directed for the following:- (a) Sofa Chair single seater, complete all as specified & directed by Engr- in- Charge.
Sofa Set (5 Seater), complete all as specified & directed by Engr- in- Charge.
Table centre 16'' x30'' x21'' , complete all as specified & directed by Engr- in- Charge.
Hat stand small with mirror, complete all as specified & directed by Engr- in- Charge.
Table office officers wooden, complete all as specified & directed by Engr- in- Charge.
Table office clerk wooden, complete all as specified & directed by Engr- in- Charge.
Table writing 30'' x36'' x21'', complete all as specified & directed by Engr- in- Charge.
Table peg 16'' x14'' x21'', complete all as specified & directed by Engr- in- Charge.
Table dining 8 Per, complete all as specified & directed by Engr- in- Charge.
Table bed side, complete all as specified & directed by Engr- in- Charge.
R B Chopra Freighters Private Limited
singh traders
SHARMA AND SONS CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .