Renovation of Inspection House in Irrigation Colony Campus at Cantt Kanpur Nagar

Amount

Dismantling existing plaster including disposal of refuse with in distance of 60 m.

Dismantling C.C. or brick or granolithic floor including base concrete and including stacking of dismantled material with in 60m distance

Dismantling brick work or stone work and cement concrete in cement mortar and including stacking of material with in a distance of 60M as per direction of Engineer-in-charge .

Dismantling floor to be stone flagged or tiled floor and wall .including stacking of dismantled material with in 60m distance

Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.l. limpet washers or with G.l. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch In horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 m/m2

Earth work in foundation in dry ordinary soil (Loam, clay or sand) including lift upto 1.50 m. and lead upto 30 m. and including filling, watering and ramming of excavated earth into the trenches or into the space between the structure and the sides of foundation trenches or into the plinth with removal and disposal of surplus earth as directed by the Engineer - in - charge upto a distance of 30 m. from the foundationtrenches.

Local Sand Filling in foundation of Columns and Boundry wall including cost of labour ,material t&p Etc complete.

Providing and Laying CC 1:2:4 for 1 cum WITH 20 mm Stone Grit i/c all cost of , Material labour ,T&P Etc Complete .

12.5mm thick cement plaster in 1:6 cement & coarse sand on wall thickness not less than 10mm including all cost material labour T&P .

Providing and Laying CC 1:2:4 for 1 cum WITH 6.7 To 10 mm Stone Grit i/c all cost of , Material labour ,T&P Etc Complete.

12.5mm thick cement plaster in 1:4 cement & coarse sand thickness not less than 10mm including all cost material labour T&P.

Providing and fixing false Ceiling at all Hight i/c providing and fixing of frame work made of special section power pressed from MS sheet-12 mm thick tapered edge gypsum plain board etc. including all material labour & T&P etc. complete.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and laying vitrified tiles in different sizes thickness to be specified by manufacturer with water absorption less than 0.08% and conforming to is 15622 of approved make in all colour and shade in skirting riser of of steps over 12 mm thick bed of cement mortar 1:3 (1 Cement,3Coarse sand) jointing with gray cement slurry @ 3.3 kg/sqm including grouting the joint with white cement and matching(200X300 )mm .

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Distempering Two coat with oil bond distemper of approved brand and manufacturer and of required shade on undercoated wall surface to give an even shade over an including a priming coat cement primer of approved brand and manufacturer such as Berger, J&N Shalimar, Asian Paints after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including preparing the surface even with plaster of Paris or approved synthetic material and sand papered smooth including cost of materials .

Removing paint or varnish from steel and metal surface or from wood and wood based surface with paint remover of approved brand and manufacturer or with caustic soda and making the surface even excluding cost of material ( AS per sor No. Ch 12(12).

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws .

painting Two coat over priming coat (but excluding cost of priming coat) on steel and other material surface including cleaning the surface of all dirt, dust and other foreign matter and papering and stopping including cost of material, labour tool and paints etc.required for proper completion of work, paint shall be used as per standard I.S. specification.

Providing and Laying CC 1:1.5:3 (1 Cement,1.5 Coarse Sand, and 3 Graded Stone size Slab i/c all cost of , Material labour ,T&P Etc Complete .

Class M 150 Brick work in 1:6 cement and coarse sand I/C, labours and T&P. etc. Required for proper completion of work.

Centering & shuttering for RCC/RB work including cost of up to 3.0 m. height.

S/F of PVC water storage tank syntax size 1000 Ltr on Roof top i/c making Pad of required size and connecting with inlet and outlet of pipe complete.

Supplying and binding of Steel for Casting of RCC including cost of steel labour T&P Etc Complete.

Supplying and Fabrication of Square Iron with 35x35x5 mm angle iron assembeled jali Between Column to Column including cost of Material Labour T&P etc Complete.

25 mm thick DPC with cement and coarse and 1:2 including water proofing material in the proportion as specified by the manufacturers excluding cost of all material labour and T&P complete.

Supply and laying Tarfelt at the junction of wall and roof including necessary overlap giving a coat of approved mastic paint below the bellow tarfelt and i/c supply of all material labour and T&P etc.completeion of work fix as per standard.

Supplying and Laying Murga Jali 1X2" 24 ms Guage wire including cost of labour ,material and T&P etc complete.

Supplying And Fixing Granite Stone On Column and RCC Plateform including cost material ,labour T&P etc Complete.

Supplying And Laying Interloking C.C. paver block ( 80 mm thick, M-30).

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Dismantling 15 to 40 mm dia G.l. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge.

Supplying and Fixing C.P. Central Hole basin mixer with 'U' shaped round casted spout with 450 mm long braided hoses (Jaquar, ESSCO, Hindware, Cera or equivalent).

Supplying and Fixing C.P. Wall Mixer with 115 mm long Bend Pipe for connection to Overhead.

Supplying and fixing White glazed earthen ware (Indian Type) W.C. Pan 510 mm.

Supplying and fixing White glazed earthen ware (European Type) W.C, Pan 580 mm.

Supplying and dfixing 10 Litre C.I. Low level flushing cistern but without brackets.

Supplying and Fixing Jet spray heavy quality ISI Mark including 1 mtr. Pipe.

Supplying and Fixing C.P. Brass towel rail 750x20mm together with pair of C.P. brass brackets to fit the towel rail.

Supplying and Fixing C.P. Brass towel Ring, Jaquar ESSCO, Cera, Hindware or equivalent.

Supplying and Fixing Soap dish, Jaquar ESSCO, Cera, Hindware or equivalent.

Supplying and fixing Wash hand basin 550x400 mm size of white glazed earthen ware (22"x16").

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Supplying and fixing chlorinated polyvinyl chloride(CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings of pipe and fittings with good the same including testing of joints complete as per direction engineer in charge. Concealed work including cutting chases and making good the walls etc15 mm nominal outer dia pipe.

Supplying and fixing chlorinated polyvinyl chloride(CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings of pipe and fittings with good the same including testing of joints complete as per direction engineer in charge. Concealed work including cutting chases and making good the walls etc 20 mm nominal outer dia pipe.

Supplying and Fixing C.P bib cock heavy quality (Jaquar, ESSCO, Hindware, Cera or equivalent) Short body.

Supplying and Fixing C.P bib cock heavy quality (Jaquar, ESSCO, Hindware, Cera or equivalent) long body.

Supplying and Fixing C.P two way bib cock heavy quality (Jaquar, ESSCO, Hindware, Cera or e uivalent short bod.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers com lete.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931.

Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect.

Supply and fixing of 12 Watt to 15 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing with extended heat sink, diffuser of Polycarbonate meterial and driver set complete in all respect.

Supplying and fixing 12 Modular GI Box along modular base and cover plate for Modular switches in rececc etc. As required.

Supplying and fixing 8 Modular GI Box along with modular base and cover plate for Modular switches in rececc etc. As required.

Supplying and fixing 6 Modular GI Box along modular base and cover plate for Modular switches in rececc etc. As required.

Supplying and fixing 3 Modular GI Box along modular base and cover plate for Modular switches in rececc etc. As required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supply and fixing of 15 amp Modular Socket on existing Modular Plate and switch box including connection but excluding modular plate etc as required.

Supply and fixing of 15 amp Modular Switch on existing Modular Plate and switch box including connection but excluding modular plate etc as required.

Supply and fixing of 5 amp Modular Socket on existing Modular Plate and switch box including connection but excluding modular plate etc as required.

Supply and fixing of 5 amp Modular Switches on existing Modular Plate and switch box including connection but excluding modular plate etc as required.

Supply and fixing of electronic fan r regulator( Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.

S & F surface/Flush mounting 12 ways SPN distribution board with additional metal door without MCB complete in all respect, as Direct by Engineer in Charge.

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 100 to 120 Watt. Confirming to IP 65 protection complete in all respect.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.

Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit on surface, with one number 14 SWG copper earth continuity wire, complete in all respect.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.

S&F of 63 Amp. four pole change over switch on 40mm x 40mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.

S&F of 6 Amp. to 32 Amp. SP MCB (10 KA) C Curve.

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect.

S.S.ENTERPRISES