Loading
Loading…
Loading…
Tender Value
₹99.9 L
EMD Value
₹2.0 L
Closing Date
2 Jul 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
Above/Below/Par
SIG JAT
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB of Northern Railway Standard Tender Document 2022, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
(a) The Tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of tender for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges- substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificate issued by any Govt. Organization, work experience certificate issue by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated /registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
Defination of Similar Work :- Any signaling work involving trenching, cable laying, termination and outdoor wiring. Note 1: Tenderer may be required to submit the schedule of those works, Completion/ Performance Certificates of which have been submitted by him/her in support of 30 / 40 / 60 % (as the case may be) criterion of similar nature of work.
33 conditions · 16 needing a document upload
Tender fee (if asked) need to be deposited online on www.ireps.gov.in. 2. EMD need to be deposited online on www.ireps.gov.in. 3. For the tenders costing above 50 Lacs: Details of "total contractual payments" in the previous three financial years. 4. For the tender costing above 50 Lacs: Details of technical credentials have successfully completed or substantially completed similar nature work as mentioned in tender condition. Completion certificate issued by competent authority should mandatorily mention Name of work, name of agency, Contract agreement number, date of completion/date of completion of substantially completed work, Completed Cost/substantially completed cost of work, Nature of firm (Partnership/Proprietorship etc.) and details of its constituents, if any, PAN/GSTIN etc. so that evaluation may be done accordingly. 5. If Tenderer is sole proprietor: Notarized copy of Affidavit on Stamp paper of appropriate value declaring that his/her concern is a Proprietary concern. 6. If Tenderer is Partnership firm: Self attested copy of (i) Registered/Notarized partnership deed (ii) Original/Notarized power of attorney. 7. If Tenderer is JV/Limited Company: Copy of Memorandum and Articles of Association of the company. Power of Attorney (duly registered/notarized as per prevailing law) by the company authorizing the person to do/act on behalf of the company. 8. If Tenderer is Company: Copies of MOA (Memorandum of Association) & AOA (Articles of Association) of the company. Power of attorney duly registered/notarized by the company in favour of the individual signing the tender on behalf of the company. Resolution of Board of directors in regards of approving Power of attorney issued. 9. If Tenderer is Society: Attested copy of the certificate of registration. Deed of formation. Power of attorney in favor of the tender signatory.10. Copy of PAN number and TIN number
Please submit the copy of the registration certificate of firm, PAN, GSTIN etc.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Sectional Signal Maintenance Contract (SSMC) for Jammu Division
433-Sig-JAT-39-26-27~NR
433-Sig-JAT-39-26-27
Open
Works - General
12 Months
Jammu, Jammu And Kashmir
₹0
₹2.0 L
2 Jul 2026
10 Jun 2026
18 Jun 2026
121 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 46,39,600.78 | ||
| — | 400.00 | — | — | ||
| Supply of Signal No. Plates as per Drg.No. RST -11393 .Inspection:Consignee. | — | — | — | 2,03,392 | |
| — | 500.00 | — | — | ||
| Supply of insulation for 'L' bracket for IRS type point machine fitting Cosisting of Insulation plate- 01 No., Ferrules- 2 Nos. Washers- 4 Nos. (Material Nylon-66). Inspection by Consignee | — | — | — | 1,28,530 | |
| — | 500.00 | — | — | ||
| Supply of Gauge tie plate insulation as per RDSO drg.no. T-10372/ Alt. 2, T- 10371/Alt.2 ,T-10368/Alt. and to IRS S-23 and S-40. Inspection by Consignee. | — | — | — | 1,23,250 | |
| — | 500.00 | — | — | ||
| Supply of william stretcher bar insulation set suitable for ground connection RDSO Drg n. T-1.367, T-10368, T-10384 to IRS-23 and S-40 with latest amendement. The material should be procured from RDSO approved firm. Inspection by Consignee. | — | — | — | 1,81,300 | |
| — | 500.00 | — | — | ||
| Supply of insulation for 'P' bracket for IRS type point machine fitting.Cosisting of Insulation plate- 01 No., Ferrules- 2 Nos. Washers- 4 Nos. Inspection by Consignee. | — | — | — | 3,32,005 | |
| — | 1000.00 | — | — | ||
| Supply of screw less mounted 2.5 sq.mm,4-wire front entry, two input two out put, Disconnected cage clamp terminals block for test and measurement (Wago or Phonex or Elmex) as per site requirement. As per RDSO/SPN/189/2004. The colour will be decided by Eng, in charge (Preferably in Blue, Red & Grey colour in the ratio of 1;2;3) Inspection by Consignee. | — | — | — | 1,07,890 | |
| — | 200.00 | — | — | ||
| Supply of Carrier rails for above 35 mmx7.5 mm,1mm/0.039 in thickness un - slotted type. Inspection by Consignee. | — | — | — | 29,540 | |
| — | 200.00 | — | — | ||
| Supply of End plate for above item 2.5 mm/0.091 in thick . Inspection by Consignee. | — | — | — | 3,680 | |
| — | 200.00 | — | — | ||
| Supply of End Stopper plate for above item 10 mm/0.0394 in wide . Inspection by Consignee. | — | — | — | 3,202 | |
| — | 10.00 | — | — | ||
| Flexible wire 16/0.02 sqmm. Inspection by Consignee. | — | — | — | 79,170.6 | |
| — | 3.00 | — | — | ||
| PVC wire as per spec No.IS:2465/1984 & IS:694/1990 or latest (1x16 sq. mm).Inspection by Consignee. | — | — | — | 3,77,629.74 | |
| — | 20.00 | — | — | ||
| Supply of True RMS Digital Multimeter, 4000 Count, Voltage: 1000V AC/DC.Make/ Model : Fluke 17B+, DI-LOG 9206,Meco or similar or better. Inspection by consignee. | — | — | — | 2,11,866 | |
| — | 10.00 | — | — | ||
| Supply of Digital insulation Tester (Megger) 100V, Motwani, Philips,Meco or equivalent make. Inspection by consignee. | — | — | — | 54,244.3 | |
| — | 400.00 | — | — | ||
| Reflective Tape Yellow :- Highlighter grade retro reflective tape is made of non metelised polycarbonate micro primatice visible from 1000 meters highly durable ASI 90 specified reflection value will not detroinate as sure clean application and endures protection against seepage and dirt are to confirm compliance to ASI 90 size per four feet width in roll make EGP/ NBL/3M & AVERY or similar or better. Inspection by Consignee | — | — | — | 1,94,784 | |
| — | 50.00 | — | — | ||
| Composing ,Printing & Binding of different types of registers and history cards which consistist of 1. Point Crossing joint inspection register consisting of at least 100 pages.- 1 nos. 2. TWS point & Crossing Joint Register consisting at least 100 pages-o1 No's. 3. Rolling Block resister consisting of at least 100 gages-o1 No's 4. Battery Maintenance Register consisting of at least 100 pages--1 nos. 5. Axel Counter Register consisting of at least 100 pages- 1 nos. 6. Block Instrument Register consisting of at least 100 pages- 1nos. 7.Lifting Barrier Register consisting of at least 100 pages- 01 nos. 8. BPAC Register consisting of at least 100 pages- 1nos. 9. Cable Testing Register (SPIRAL) consisting of at least 100 pages-- 1nos. 10. Track Circuit Register consisting of at least 100 pages- 01 nos. 11. Earth Testing Registerconsisting of at least 100 pages.- 01 nos. 10. 12.Signal history Card (size A4).-10 nos. , 13.Printing of Motor Point history Card (size A4).- 12 nos. 14 Track Circuit history Card (FEED END) (size A4)-- 30nos. 15.Printing of Track Circuit historyCard (Relay END) (size A4).- 30 nos. 16. SSDAC Track History Card (size A4)- 04 nos. " 16. EI maintenance resister consisting of at least 100 gages - 01 No's Inspection by Consignee. | — | — | — | 1,69,766 | |
| — | 300.00 | — | — | ||
| Supply of drill bit size 7.14 mm HSS parallel shank twist drill (jobber series) make addition or similar or better. Inspection by consignee. | — | — | — | 67,644 | |
| — | 20.00 | — | — | ||
| Supply of 21/25 KHz web mounted Receiver coil as per RDSO Specification No. RDSO / SPN/177/2012 Ver. 3 or Latest suitable for single section digital axcel counter / HASSDAC of GG Tronics make for base clamp mounting type. Inspection by RDSO | — | — | — | 7,39,860 | |
| — | 20.00 | — | — | ||
| Supply of 21/25 KHz web mounted transmitter coil as per RDSO Specification No. RDSO / SPN/177/2012 Ver. 3 or Latest suitable for single section digital axcel counter / HASSDAC of GG Tronics makefor base clamp mounting type. . Inspection by RDSO | — | — | — | 7,39,860 | |
| — | 30.00 | — | — | ||
| Supply of Lead Wool (Good Quality) Inspection by Consignee. | — | — | — | 11,053.2 | |
| — | 220.00 | — | — | ||
| Supply of Plastic cover for 2 Aspect signal unit cover is opened from front side and bottom side and made of black polythene sheet of 100 micron thickness size 1200mm x 46mm x 205mm on back side 75mm wide corner to corner diagonal cross mark of silver of 100 micron thickness to be provided to the up cover with signal unit suitable to nylon rope of 5mm dia and 4mtrs length to be provided on front side and of 1.5mtr. length at center. Inspection by Consignee | — | — | — | 13,831.4 | |
| — | 160.00 | — | — | ||
| Supply of 3 aspect weather proof Rain Protection Signal Covers made with Polyolefin, polythin sheet avg random thickness 200 microns or more and the sheet processed with CX slurry polymerization to meet good rigidity, less draw down and malleability stress crack resistance and suitable to fix at rear side of the 3 aspect IPS unit duly provided with pre-stitched gripping elastic on the edge of the cover with suitable lacing rope of good quality to bind the cover over the base. For Aspect signal Unit size: 150 cm x 45 cm x 23 cm. With on back side 75 mm wide cross mark of silver colors of 100micron thickness to provided on Back with good quality adhesive (pressure sensitive adhesives) used in Duct tape or better . (Inspection by Consignee). | — | — | — | 39,193.6 | |
| — | 40.00 | — | — | ||
| Supply of 4 aspect weather proof Rain Protection Signal Covers made with Polyolefin, polythin sheet avg random thickness 200 microns or more and the sheet processed with CX slurry polymerization to meet good rigidity, less draw down and malleability stress crack resistance and suitable to fix at rear side of the 4 aspect IPS unit duly provided with pre-stitched gripping elastic on the edge of the cover with suitable lacing rope of good quality to bind the cover over the base. For 4 Aspect signal Unit size: 200 cm x 45 cm x 23 cm. With on back side 75 mm wide cross mark of silver colors of 100micron thickness to provided on Back with good quality adhesive (pressure sensitive adhesives) used in Duct tape or better . Consignee - SSE /SIG/JAT NOTE: One sample to be got approved by consignee before bulk supply | — | — | — | 10,336.8 | |
| — | 200.00 | — | — | ||
| — | 200.00 | — | — | ||
| — | — | — | 2,32,542 | ||
| — | — | — | 1,07,550 | ||
| — | 8.00 | — | — | ||
| — | 70.00 | — | — | ||
| — | 70.00 | — | — | ||
| — | — | — | 24,408.3 | ||
| — | 1000.00 | — | — | ||
| — | — | — | 49,560 | ||
| — | 500.00 | — | — | ||
| — | — | — | 22,775 | ||
| — | 500.00 | — | — | ||
| Non deteriorating type low voltage electric fuses for Railway signalling of E1 type as per RDSO spec Np.IRS.S.78/92 with 4 amp fuse ACCEPTED FIRM OFFER:- SAME AS ABOVE, MAKE/BRAND RDSO APPROVED FIRM NANDI ELECTRIC Inspection RDSO | — | — | — | 24,485 | |
| — | 500.00 | — | — | ||
| Non-deteriorating, Non-indicating type low voltage electric fuse for Railway Signalling, rated current 6 Amps., rated voltage 240V AC/DC to suit Specification No. IRS:S-78/92, (with amdt. upto date if any). Cylindrical end cap type Inspection RDSO | — | — | — | 23,895 | |
| — | 200.00 | — | — | ||
| Non-deteriorating, Non-indicating type low voltage electric fuse for Railway signalling, rated current 16 Amps., rated voltage 240V AC/DC to suit specification No. IRS: S- 78/92(with amdt. upto date if any).Cylindrical end cap type Inspection RDSO | — | — | — | 10,974 | |
| — | — | — | 22,03,189 | ||
| — | 120000.00 | — | — | ||
| Supply & laying of IInd class brick in the trench & laying as per Drg. No. (NR/S&T/Con/1.1/97) & as perinstruction of the site Engineer. Inspection Site Engineer | — | — | — | 7,62,000 | |
| — | 300.00 | — | — | ||
| Supply, installation and fixing of 25mm dia PVC conduit medium class pipe with all accessories on any type of surface including wall with proper clamping etc. PVC conduit pipe shall confirm IS9537(PtIII) as per technical specification & instructions of Railway Engineer's representative at Site Inspection: - Site Engineer.Inspection Site Engineer | — | — | — | 14,403 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .