Construction of Compound wall waiting shed Raising SWD and Paver Block pavement Arrangements for Urban Health wellness centre at Mahalakshmi Colony in ward no 94

Amount

Charges for Putting borehole of size 23 / 30 cm dia for file foundation in Sandy and Other loose soil by using hand Boxing set Rate Shall be include the cost of Labour for Boxing Fule Charges for Auger Bore and Other T & P Employed etc., complete

Earth work excavation in all kinds of soils except hard rock requiring blasting, inclusive of shoring, strutting and baling out water wherever necessary refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated depositing the surplus earth within compound in places as shown by the deptl.officers, clearing and leveling the site with initial lead of 10M and lift of 2M etc.Comp.SI.No.62-rate for 10m3

Supplying and filling in foundation and basement with M-Sand in layers of 15cum thick well rammed and consolidated including watering complying with std. specification etc.

Supplying and filling in foundation and basement with filling well gravel in layers of 15cum thick well rammed and consolidated including watering complying with std. specification etc.

Cement concrete 1:4:8 (one cement four sand and eight aggregates) Using 40mm gauge hard broken granite jelly for foundation inc. consolidation and dewatering for foundation wherever necessary etc.complete.

Brick work in CM 1:5 (One cement and five sand) using country bricks of size 8 3/4"X4 1/2"X2" including curing etc., complete For Foundation and Basement.

Supplying and erecting shuttering with necessary supports for plith beam with all cross brancings etc..,complete(Rcc coloumn footing plinth beam and lintel sides)

Supplying and erecting shuttering with necessary supports for plain surface such as RCC boxing side slab, and similar,RCC Slab with all cross bracings etc., complete in all floors of any height (The retrieved materials should be taken back by the contractor). The payment for centering shall be given after the concrete is laid. (Vertical Portion Only) using steel plates10m2.

Reinforced cement concrete 1:1 1/2 :3 (One cement One and half sand and three aggregate) using 20mm machine broken gauge bard granite jelly for RCC worksthe rate excluding the cost of reinforcement grills,centering and shuttering etc., complete in F&B

Supplying fabricating and placing in position of MS grills for reinforcement rate inc. the cost of steel for all works (the rate to include cost of binding wire also). Below 16mm

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification.

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Stucco Plastering 12mm thick using blue granite chips of size 10 mm and below over a base plastering with cement mortar 1:5, 12mm thick,including cost and conveyance of all materials to site etc,complete as per standard specification.

Supplying and laying Rubberised interlocking Paver blockM40 grade Providing and laying 60mm thick high strength type conforming IS 15658-2007 of Rubberised interlocking paver block in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in herring bonepattern with quarry rubbies cushion below the uniform shap of approved non sticking surface in top and the rate is including levelling the base preparation at paver as sub base, quarry rubbies cushion 150mm thick laying out of pavement cut the pies of fix the edge vibrating the pavers, sweeping transporting loading and unloading and laying of paver block as per standard specification etc.,

Suplying fabricating erecting of ornamental grill work ( for required Size 2.30 X 0.60 cm ) for compound top welded type using MS channel angle flat and squire bars etc., conforming to IS specification including primer coating and enamal painting as per design given by the departmental officers etc., complete as per STD Specification

Supplying and fixing Ornamental Stone Seating benchs of size 2.50mm x 0.45mm with height of 0.50mm with necessary raw materials etc., The rate is inclusive of cost of materials, labour charges and transporting etc., complete. Quotation

Supply And fixing of two seater swing using 3m long 65m dia M.S pipe of 3mm thick. The slide supports are 3m long 50mm dia M.S plate and grip the entire unit rigidly. Two swing clamp with 'U' and 'S' hooks are provided to the swing seat made out of 25mm x 25mm S.S square tube of 14 SWG with stainless steel plates of grade 304 and size of 500mm x250 mm of 16 SWGand hooks are fitted with 8mm thick tested chain 2 Nos of length 9.80m. The entire assemply is treated with zinc chromateone coat and enamel paint two coats of three different colours finshing with attractively including all materials and labour shargers etc., complete.its including foundation of the playing equipment

Supply and fixing of U-model twin sea saw four seater using 65mm dia M.S pipe of 3mm thick to a length of of 4.90m and supported assembly bars using 50mm dia M.S pipe of 3mm to a length of 2.10m each for 2 Nos. The four seater of circular type of 250mm dia S.S sheet of 16 SWG. The entire assembly is treated one coat and enamel paint two coats of three different colours finishing with attractively including all materials and labour chargers etc., complete. its including foundation of the playing equipment

Supply and fixing of slide with ladder part model using 2 nos of 35mm dia MS pipe of 14 SWG for standing and sliding, Platform sheet of size of 0.45m x 0.90 made of S.S sheet of 16 SWG . sliding sheet of size 2.40m x 0.45m made of S.S sheet of 14 SWG , and side rails for child to hold while Climbing is made of 75mm x25mm thick 14 SWG to a length of 4.50m for both sides. The entire assembly is treated with zinc chromate one coat and enamel paint two coats of three different colours finishing with attractively including all materials and labour chargers etc., complete. its including foundation of the playing equipment. Quotation

Painting 2 coats with approved cement paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc., complete. MDU-CORP-BUILDING DATA-P-53-SL No:80

Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Fabriction Supply and erection of tobulor post with Truss (100mm, 80mm, 75mm) The Rate shall be include the cost of tobulor post Truss members, labour charges for manufacturing and erection and Painting etc., complete. as per departmental specification and drawings.

Wiring with 2x1.5sq.mm. PVC insulated unsheathed FRLS SC copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch in flush with wall covered with hylem sheet of 3mm thick with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (SD 21)

Supply and Fixing of 48W LED Street Light Fitting with LED (LIGHT EMITTING DIODE) Higher End Philips / Havells / Equivalent

Add GST 18%

G ANANDHA KANNAN (BID ID -1341899)

G ILANGUMARAN (BID ID -1341862)