Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.5 LAccepted-AOC 137 3 STREET NO 4 RAJINDER NAGAR DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹35.9 L+₹27,808.45 (0.78%)Rejected-Finance | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹36.3 L+₹72,277.74 (2.03%)Rejected-Finance WZ 199 LAJWANTI GARDEN GALI NO 4 NEW DELHI 110046 | NEW DELHI | DELHI | 110046 | L3 | Rejected-Finance Not Being Lowest | |
| 4 | L4₹37.2 L+₹1.6 L (4.55%)Rejected-Finance | L4 | Rejected-Finance Not Being Lowest | |
| 5 | L5₹37.5 L+₹1.9 L (5.45%)Rejected-Finance PLOT NO 10 9 OM VIHAR PHASE 1 A UTTAM NAGAR NEW DELHI 110059 | WEST DELHI | DELHI | 110059 | L5 | Rejected-Finance Not Being Lowest |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
21 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Central) Delhi Cantt-10
GE (Central) Delhi Cantt-10
PROVN OF CERTAIN SANCTION WORK IN THE AREA OF AGE B/R-I AND AGE E/M UNDER GE (CENTRAL) DELHI CANTT-10
2023_MES_624392_3
GE/C-58/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (Central) Delhi Cantt-10
As per NIT
9 documents required · 9 mandatory
₹500
Yes
GE (Central) Delhi Cantt-10
₹98,000
Yes
6 Jan 2024
6 Dec 2023
23 Dec 2023
6 Dec 2023
21 Dec 2023
7 Dec 2023
6 Dec 2023 - 7 Dec 2023
Amount
Excavation in trenches n exc 1.5 Mtr wide & N exc 1.5 Mtr deep and getting out in soft/loose soil
M&L PCC (1:5:10) type E-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified.
M&L for brickwork with subclass 'B' bricks, straight or cirved on plan exc 6Mtr mean radius, built in cement mortar 1:6.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F Mild steel rolled section or hollow pipes( square or round pipe) as in main and cross beam, hip and jack rafter, purlins, where connected to common rafter and running rails fixed with cleat or other connecting plates etc. complete all as specifed and directed.
M&L Painting two coats of synthetic enamel paint over a coat of red exide including preparation of new steel surfaces of any description over 10cm in width or grith not other wise described. Complete all as specified and directed.
M&L providing CM 1:2:4 Type B-0 12.5 mm graded agg. In precast lintels incl including necessary form work complete.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips.
M&L for TMT bars 5mm and over upto and including 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips as in stirrups, spaces and binders.
M&L for rendering 15mm thick on fair faces of brick or concrete surface in cement mortar 1:6 mixed with integral water proofing compound.
Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing.
Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottomrails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welde/ sealed to the styles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing.
S&F steel ventilator with top hung shutter including hinges, steel peg stay including two coats of synthetic enamel paint over a coat of red oxide primer complete.
S&F galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm & fixed with tinned tacks or galvanised wire staples.
S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed.
S&F 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
S&F 125mm aluminium handles, cast type ,anodised and pattern/design as approved.
S&F MS butt hinges medium wt of size 100 mm complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level).
M&L for 25mm thick cement concrete type B-0 1:2:4 (12.5mm graded aggregate) as in sub floor.
M&L for Non-skid ceramic tiles, coloured, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified.
M&L Non - skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile n. exc. 0.11 Sqm but exc. 0.18 Sqm, in wall,skirting etc set and jointed in neat cement slury & pointed in coloured cement to match laid over a 10mm thick rendering in CM 1:4.
M&L Vitrified ceramic Light shade coloured tiles 10mm thick square/rectungular polished area of each tile not exceeding o.36 Sqm in floor etc set and jointed in neat cement sluarg and painted in white or coloured cement to match laid over 15mm thick screed bed of cm 1:6 .
Ditto as item No 16 above but as in skirting over rendering 10mm thick in cement mortar 1:4.
Taking down cement or cement lime plaster any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L 15mm thick rendering on any face fair faces of brick work or concrete surfaces in cement mortar 1:4 finsihed the surfaces even and smooth without using extra cement.
M&L glazed ceramic coloured tiles 450mm x 300mm x 6 to 7mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick bedding layer in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed by Engineer-in-Charge.
M&L 50mm thick PCC 1:2:4Type B-1 using 20mm crushed stone aggregate as in plinth protection and like finished even and smooth without using extra cement.
M&L for preparation of new plastered wall surfaces and applying three coats of white wash.
M&L for preparation of new plastered wall surfaces and applying two coats of cement base paint
S&F Vitreous china wash down water closet pan (pedestal pattern), white, including flush pipe of polyethylene of low or high density or PVC 32 mm dia., plastic water closet seat closed pattern with cover and hinging device and trap with connection in repairs complete all as specified.
S&F Chromium plated jet for EWC complete all as specified.
S&F in repairs Vitreous china wash hand basin, white, flat back, size 550 X 400 mm including fixing with brackets exclusive of fixing of supply and waste pipe and 32 mm chromium plate waste fitting with long screwed shanks and fly-nuts complete all as specified.
S&F PVC valve less syphonic action type low level flushing cistern white of capacity 10 Ltrs with inlet valve float and fixed to water closet with PVC flushing pipe 32mm dia
S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm in repairs complete all as specified.
S&F Brass chromium plated shower rose 125mm size for iron pipe or for unions and fixed to 15 mm bore steel tube in repairs complete all as specified.
S&F Bib taps, cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore steel tube fixed in repair complete all as specified.
S&F Rotational moulded polythylene water strarge tanks 500 ltr (Cylinderical vertical with closed top ) hoisted and fiexed in position all as per specified in SSR Pt-1.
S&F15mm bore tubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors
S&F 15mm bore stop valve/angle valve cast copper alloy chromium plated fancy type screwed down, high pressure, with crutch or butter fly handles fixed in repairs.
S&F 20mm bore brass ball valves, high pressure, with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed.
S&F 110mm bore PVC (SWR) soil, waste and vent pipe, in any length , with rubber joints, laid in trenches or in floors.
S&F PVC (SWR) 110mm bore bend of any radius.
S&F in repairs PVC (SWR) bends ( 75mm bore) including jointing with solvent cement complete all as specified.
S&F 75mm bore PVC (SWR) soil, waste and vent pipe, in any length , with rubber joints,fixed vetically on wall.
S&F PVC (SWR) floor traps 75mm bore and jointing to waste pipe in solvent cement.
S&F in repairs PVC (SWR) vent cowl of 110 mm bore.
S&F in repairs PVC (SWR) vent cowl of 75 mm bore.
S&F in repairs PVC (SWR) junction double,(double T, 110 mm bore), equal or unequal , including jointing with solvent cement complete
S&F in repairs PVC (SWR) junction double,(double T , 75 mm bore ), equal or unequal complete, including jointing with solvent cement.
S&F sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe including connecting union overall size 1145mm x 510mm x 200mm with bowl size 510mm x 400mm x 200 mm including taking out existing china ware sink with waste fittings complete all as specified.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
M&L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified.
Sand filling under floors or in foundations incl. watering and consolidation.
M&L 60mm thick interlocking paver block with grey cement and with pigment of any size and shape confirming to IS 15658-2006, M-35 Grade as approved by E-I-C laid in flooring and joints filled/broomed with fine sand.
M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggrgate as in coping to wall complete all as specifed and as directed.
Taking down chowkats or frames exc. 1.5sqm but n.exc 4 Sqm each with shutters (without taking off shutters from frames ), complete all as specified.
Taking down chowkats or frames n.exc. 1.5 Sqm (without taking off shutters from the frame).
S&F steel windows with side hung shutters incl box type hing, steel handle and peg stay complete with glazing bar.
All as per item No 61 above but without glazing bars.
M&L two coats of synthetic enamal paint to steel surfaces of any discription over 10 cm width or girth not otherwise described after preparation complete.
S&F pressed steel frames,size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc..
S&F pressed steel frames,size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc.
Providing cement concrete type C-0 1:3:6 (12.5 mm graded agg) as for pressed steel chowkhats.
S & F 30 mm thick flush shutter solid core construction, with block board core and plywood face panels,commercials type on both sides complete all as specified.
S&F factory made 35mm thick second class hard wood Glazed and skelton door shutters , open rebated and prepare to receive glass, gauge etc, size of members of shutters as specifed in SSR part I, section 8 clause 8.24(b) .
M&L two coats of synthetic enamel painting on wooden surfaces not otherwise described over 10cm width or girth over a coat of pink primer inclding prepration of newly untreates surfaces complete all as specified and directed.
Supply only butt hinges, 100mm medium weight, cold rolled mild steel.
M&L cement concrete 1:4:8 type D-2 using 40mm graded stone agg as in bed to drain pipe, incl packing under and haunching against the sides of pipe 150mm bore after they are laid and tested.
M&L, 150mm internal dia salt glazed storeware drain pipes laid in treanches and jointed as secified.
M&L for precast manhole cover RCC 1:2:4 type B-1 using 20mm graded stone agg as in cover slab and like axcept set in cement mortor 1:4 complete incl necessary form work.
Returning filling in including spreading, levelling, watering and well ramming in layers n exc 25 thick in soil.
Removal of surplus spoil to a distance exc 50 Mtr and n exc 100 Mtr and depositing where directed at a level n exc 1.5 Mtr above starting point in soil.
M&L for providing 75 mm thick cement concrete 1:2:4 type B2 (40 mm graded aggregate) as in hard standing laid in alternate bays Complete all as specified and directed by Engineer-in-Charge.
M&L three coats white wash on ceiling undecorated surfaces including prepration of newly plastere surfaces.
M& L for applying two coats of oil bound distemper on new wall surface with roller brush complete all as specified and directed.
S& F MS framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 or Fe 165 complete all as specified and as directed.
S&F powder coated Anodiesed aluminium frame for partition, doors, windows, ventilators with one or more rebates incl. joining cleat for fixing etc. complete all as specified.
S&F powder coated Anodiesed aluminium door shutters, aluminium section weighing 0.55 Kg/m incl. necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each doors,Brass 2 lever mortice lock verticle type size 100mm, hinges, anodiesed aluminium snap beading screw with etc.
S&F powder coated not less than 50micron Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS :1868 with minimum anodiccoating of grade AC 15) of approved design/pattern, with approved stadandered section and fixed to existing window frame with CP brass/stainless steel screws @200mm c/c, incl cutting the grill to proper opening size for ficing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement and direction of Engineer-in-charge.
S&F 4.8 mm thick sheet glass, ordinary quality and glazing in Aluminium partition, door or window with solar control files 50 micron in squares exc 0.5 Sqm each pane.
S&F door closer aluminium (extruded section) hydraulically regulated designation No. 03, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kgs.
Supply and fixing Floor door stopper 140mm long of aluminium alloy and tongue, anodised with hard drawn steel spring fixed in floor etc complete all as specified & directed by Engineer-in-charge.
Demolition of brick work or stone masonry built in cement mortar in any position including segregating serviceable/unserviceable bricks/stones Complete all as specified and directed by Engineer-in-Charge.
Supply & fixing steel water tubes of size 15mm bore (medium grade) galvanised with all fittings and fixed complete to walls and ceiling or laid in floors/ concealed in walls complete, all as specified & directed by Engineer-in-charge.
S&F 15mm dia brass chromium plated mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including taking out existing mixer from old WHB, complete all as specified.
S&F 15mm dia brass chromium plated two in one wall mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall and shower, complete all as specified.
S & F in repair CP health faucets with crutch or push handle, screwed down with 1.5mtr CP flexible pipe, screwed for pipe, 15mm dia, fancy type, cast copper alloy. Chromium plated long body complete all as speciifed.
S & F in repairs glass corner 300 mm radius of 10mm thick toughned glass with CP Brass railng, fixed with screws fancy type, complete all as specified .
S & Fixed in repair PVC mirror cabinet made of high intensity polythene of biggar size 500 x 400 x 120 mm complete all as specified.
S&F in repair brass chromium plated toilet paper holder, complete all as specified.
S&F stainless steel gratings 100mm bore size fixed with cement motar complete all as specified.
S&F in repair brass chromium plated soap dish, complete all as specified.
S&F in repair stainless steel peg set of 06 peg, 45 centimeter long, complete all as specified.
S&F in brass chromium plated tubular towel rail, 20mm dia, 60cm long between flange including brackets.
S&F in brass chromium plated towel rack 60cm long between flange including brackets.
S&F in repair pvc floor trap square type with Cockroch Proofing CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified.
S&F anodised aluminium snap grade of size 600 X 600mm frame work for false ceiling all as specified.
S&F hangers 6mm dia G I (upto 1200mm length) asjusting level fixed to roof slabs by means of ceiling cleats made out of G I flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long.
Exposed metal frame ceiling with 8mm thick calcium silicate board of silicious and calcareous material reinforced with cellulose fibre for fixing in 600mmX600mm grid (frame work for ceiling shall be measured and paid seprately).
S&F curtain rod made out of 25mm dia(outer dia )pipe having thickness 0.63mm , PVC coated and colour/pattern, over all dia 28 to 29 mm including brackets complete all as specified and directed.
Excavating in post holes soft/loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,
M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes complete all as specified and directed.
Dismantling boarding any description (board/plywood) fixed in any position with screw, complete all as specified.
S&F PVC 18/19mm thick PVC moulded solid board, one side prelaminated for cabinet boxes,shutters etc. with shelf and shutters full size fitted under /above kitchen cooking platform and other platform complete all as direction of the Engr-in-Charge and the manufacturers specifications and drawings.
S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30 mm, complete all as specified.
S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified.
S&F stainless steel handle of size 150mm size long complete all as specified.
Supply and fix 40mm dia, cup board knobs fixed with nuts, screw and washer of brass polished , complete all as specified.
M&L for 2nd class hardwood plain, solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified.
S&F stainless steel handle of size 200mm size long complete all as specified.
S&F 300mm long, stainless steel of AISI 316 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified.
S&F brass chromium plated magic eye complete all as specified.
Supply and fix 150mm mild steel ordinary rat tail rod pattern springs including roller and roller plate including welding where ever necessary complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, all as specified.
M&L for rectified coloured ceramic tiles 300x600 x 7 to 8mm thick, as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 all as directed.
M&L for rectified coloured ceramic tile 300x300x6-8 mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in CM 1:6 complete all as directed.
Dismantling floor, hearth wall tile incl cement mortar bedding (but not backing) removing serviceable tiles and rubbish out of premises, all as specified.
Material and labour for preparation of new plastered surfaces as of walls and applying Two coats of weather proofing exterior acrylic emulsion paint of DULUXWeather shield Max or APEX ULTIMA from Asian paint over one coat of primer from the same manufacturer white lime wash complete all as specified and directed.
Dismantling of 100 mm dia cast iron pipe (soil/waste/vent) with fittings etc fixed to walls,ceiling, on floors & from trenches if required including taking out any type of joints complete all as specified.
All as per item 124 above but 75mm dia
S&F steel windows including pressed steel frame made of 1.25 mm thick MS sheet of size 125x60 mm double rebated with side hung shutter both glaze,gauge and guard bars of 12mm square bars placed horizontally/vertically @ 125mm C/C ,including box type hinges steel handless and peg stay ,tower bolts and including glaze/gauge and guard bars dovetailed or welded ,incl one shop coat of red oxide primer ( wire gause and glass pan shall be measured seperately ). Incl M&L for providing PCC 1:2:4 (12.5mm graded stone aggregate) to fill the frame and making good complete all as specified and directed by Engineer in Charge .
M& L for preparing the entire surface with applying 2-3 mm thick birla/ JK wall care putty on walls surface finished even and smooth complete all as specified and directed.Putty to be procured directly from manufacture..( Item is executed in stage and passed.)
S & F in repairs stainless steel of AE - SI 316 grade 100 mm size mortice lock vertical type, 4 levers with key in duplicate,incl 2 no suitable handle fixed to shutters with screws,complete all as specified.
Supply and fix in repair chromium plated brass angle valve dual type suitable for 15mm bore pipe, complete all as specified.
S&F in repair 15mm dia brass chromium plated Sink mixer for mixing hot and cold water screwed down for iron pipe and fixed to Kitchen sink including taking out existing mixer , complete all as specified.
S&F mild steel as in hand rail, balusters, noising to steps, post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, drilling, bolting or riveting etc, conforming to Fe-290 , Gde-E-165 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.
Supply only 3.15 mm dia galvanised steel chain link fencing, 100X100 mm mesh, made up into mattrsses or cages, lapped, wired a all as specified.
Fixing only chain link fencing including line wires any mesh, size and type to any to any type of standard, rail, straining bolts, etc. including provn of winding wire all as specified.
M&L mild steel round bars 10 mm dia conforming to FE-410-W (Gde E-250) quality A or Fe-290 (Gde E-165) for use in chain link fencing as wind tie all as specified.
Mild steel screw bolts(machine made) with hexagonal or square heads at one end screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 30 cm and dia of neack exc 12 mm but not exc 20 mm complete all as specified and as directed by Engineer-in-Charge.
S&Fsteel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with srew.
M&L providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat: SBR polymer (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area mixed with specified portion of AP SMARTCARE or equivalent Repair Polymer including taking down existing roof treatment of any type including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified land as directed. Note: The application shall be executed on any type of surface and on horizontal/Vertical areas.
M&L providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajas in multiple coats @2.0 litre/sqm. Primary [coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge.
Taking up or down 15 mm dia GI tubing and connections including cleaning for re-fixing, complete all as specified.
M&L for rendering 15mm thick in cement mortar 1:4 with two coat of tape create mixed (1:2) with cement paste @ 500 gm per sqm as per manufacturere instruction in sunken portion of toilets, finished even and smooth without using extra cement and applying a coat of hot blown bitumen 85/25 grade as the rate of 0.70 kg per sqm and applying one coat of hot blown bitumen 85/25 grade at the rate of 2.6 kg per sqm and one layer of 0.5mm thick fibre tissue over it and finally third layer of hot blown bitumen 85/25 grade at the rate of 2kg per sqm including getting out, complete all as specified.
S&F in repair vitreous chinaware coloured oval shape wash hand basin (WHB) size 550mm x 400mm complete, Ist quality, including provision of pair of mild steel angle iron brackets of suitable size duly painted and cutting for and pinning in ends of brackets in walls & making good & including providing and fixing of suitable waste pipe and waste fitting complete all as specified.
S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with brass chromium plated bracket guard and railing 60cm long.
Cutting holes in brick wall built in cement mortar for inserting hold fasts, depth of embedded postion of hold fast /lugs measured from the face the jambs into the wall exc half brick but n.exc one brick thick and making good the dismantaled portion in cement mortar 1:3 or in cement concrete 1:2:4 type B-1, using 20mm graded stone agg complete all as specified upto six storey height.
M&L External Endura chequered cement concrete tiles 30cmx 30cmx 10mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 15mm thick screed in cement mortar 1:6
M & L for one light/ fan point controlled by one switch wiring complete with, PVC insulated and unsheathed cable 1.5 sq mm (nominal area) multi stranded copper conductor single core Conforming to IS : 694 including medium duty surface conduit unplasticised PVC conduit conforming to IS : 9537 ( Part-3) and ISI marked 20 mm dia with concealed/Cashing capping in wall pressed steel terminal boxes 1.6 mm thick of required. size (factory made) with top cover laminated sheets of required colour for fixing piano switches complete with all accessories and all as specified including PVC insulated and unsheathed cable 1.5 Sqmm (nominal area) multi stranded copper conductor single core Conforming to IS : 694 of green colour as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified and directed.
S & F water heater storage type (Geyser) vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection, having adjustable knob for temperature control and inner tank material of superior glass lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar pressure complete all as specified of capacity 15 ltr having heating element 2 KW and not less than 5 star rating with minimum two year warrant on product, minimum 3 years warranty on heating element and minimum 7 years warranty on inner tank. Note : old unservicable geyser will be deposoted in MES yard.
S&F LED 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6000K, Surge protection of 2.5 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.
M&L for ceiling rose, surface polycarbonate isolated body three terminals
M&L switch piano flush button type 5 Amp SP one way .
Supply and fixing Ventilating Fan 250 mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all as specified and as directed.
Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 1000 lm with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed.
M&L for sub main wiring with two single core FRLS stranded copper conductor cable 1100 volts grade of size 4.0 sqmm and one single core FRLS stranded copper conductor cable 4 sqmm for earth wire in and including medium grade PVC concealed conduit with all fittings complete all as specified and directed
S&F sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity complete all as specified and directed.
S&F MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.
S&F MCB SPN 32 Amps 240 volts 10 KA 50 HZ 'C' curve complete.
S&F MCB SP 6-32 Amps 240 volts 10 KA 50 HZ 'C' curve complete.
Supply,laying in repairs of PVC under ground XLPE insulated heavy duty electric cables armoured with aluminium conductor, 1100 volts grade, cross sectional area 10 sqmm 2 core laying in trenches, fixed along wall, through GI pipe under floor complete all as specified and directed.
S&F for cable protection GI tubing light grade in trenches/fixed to wall/ceiling including required GI fitting of size 40mm dia complete all as specified and directed.
Supplying laying and cushioning for cable protection in trenches 18 cm thick layer before laying cable and 15 cm thick layer over the cable including well punning complete all as specified and directed.
Supplying laying sub class ‘B’ bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection complete all as specified and directed.
S&F Turbo force Wall Fan AC single phase 230/240 V, 1440 RPM of size 600 mm sweep (24") ,180 watt, Aluminium alloy three blade,Double ball-bearing 90° oscillation,Sturdy close-mesh guard beatifull design,Powerful heavy-duty motor,air dilivery 270 M³/Min, mounting on wall complete all as approved/ specified and directed by Engr-in-Charge. Make:- As per Tender Page No 77 Make List Ser No 141
M&L distribution board SPN 8 way with 200 Amp rated bus bar double door.
M&L distribution board SPN 12 way with 200 Amp rated bus bar double door.
M&L MCB SPN 40 Amp "C " curve with 10 kA breaking capacity.
M&L MCB DP 63 Amp "C " curve with 10 kA breaking capacity.
Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip and wire armoured , electric power cables (heany duty) 1100 volts grade with stranded alumimium conductor of size 16 Sqmm 04 core.
M&L earthing complete with GI electrode 600x 600 x 6mm, thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below normal ground level (with top edge of earth plate not less than 1.50 mtr below normal ground level connected to GI strip 32x6mm as earthing lead by means of bolt nuts, check nuts, and washers of brass connected including gun metal or phosphorus bronze of sixe 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25 mm long hexagonal head screwed all as specified including excavation and earth work and disposal of surplus soil incl 40 mm GI tubing light grade and necessary fitting for protection of GI strip incl laying of charcoal dust and common salt PPC (1:2:3) type C-1 (using 20mm graded stone aggregate) for earth pit with 40 x 40 x 6mm MS angle iron frame for cover 40 mm thick (1:2:4) type B20 using 12.5 mm graded stone aggregate reinforced with 8 mm dia round bar @ 75mm C/C both way with MS handle 20mm dia plastering 15mm thick CM (1:6) internally externally PGL funnel with ground wire mesh 20mm dia Med grade GI pipe for watering complete all as shown on electrical plate No 3 of SSR Part-1 2009 and connected in earth test incl testing completed all as specified. and directed.
M/L for Hard core of guage not exc 63mm with broken stone deposited spread & levelled in layers n.exc 15cm thick, watered & ramed to a true surface.
M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid PVC conduit medium grade ISI Marked and all conduit accessories concealed in wall/ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box / M S steel terminal boxes, concealed in walls with suitable modular inner and outer plate / 3 mm thick laminated top sheet cover for housing switches , socket out let and fan regulators etc , all as specified and as directed for the followings:- complete all as specified and directed by Engineer in charge.
One bell / buzzer point controlled by one bell push
One 3 pin 5 Amps socket outlet point controlled by one way switch on same board
One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.
All as per item No 170 above but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core stranded copper cable for one three pin 15/16 A socket outlet point on independent board complete all as specified and directed by Engineer in charge.
Supply and fix LED batten luminaire surface mounted, 4 feet system wattage not less than 20 Watts, > 2400 systems lumen outputwith lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.
Supply and fixing LED Bollard integral decorative with PMMA diffuser 10 watt of height 0.6 meter with IP 65 protection suitable for single phase 230 volts 50 HZ AC Supply including LED bulb , Poles, service wire conduit pipe and cement work complete all as specified and directed by Engineer-in-Charge.
Supply and fixing new generation, post top energy saving environmently friendly 25W , long life aesthetically designed with symmetrical light distribuiton spun aluminium landscape luminaire with high power LED as light sources.
M&L in replacement socket outlet 6 Amp flush button type complete all as specified and directed by Engineer in charge.
S&F not less than 35W High efficient LED Street light fitting with pressure die cast Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie should more than 110lm/W. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<10%, High and low protection along with a surge protection of 4 KV including provision of suitable dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed complete as specified and directed.
Supply and fix wall mounted fan 400mm size, 230 volts , 50 Hz 1420 RPM with 90 degree oscillation and having speed control by pull cord (two) system complete all as specified and directed.
S&F switch Modular type 6 Amps 1 Way,1 module, 230V AC complete all as specified and directed by Engineer in charge.
M&L for switch Modular type 16 Amps 1Way, 1 module with modular plate light marking 230V AC complete all as specified and directed by Engineer in charge.
M&L in replacement Modular socket outlet 2/3 pin 6/16 Amp universal socket 2 module complete all as specified and directed by Engineer in charge.
S&F Modular socket outlet 2/3 pin 6 Amp socket 2 module complete all as specified and directed by Engineer in charge.
Supply and Fixing wall mounted angular Electric chimney black colour of suction power not less than 1220Cum/Hr,Al casette with stainless steel outer layer ,touch control panel,3 speed motor with 250 watt with decorative smart cooker hood SS and glass ,energy efficent Led light with digital display , including ducting not less than 12 feet as per site required complete all as specified and as directed by Engr-in-Charge.
STRATO 2x2 Ultra Slim recess mounted EdgeLit LED module with high brightness LED package and unique pattern acrylic de-glaring diffuser sheet for glare free uniform light distrubution suitable for armstrong/grid ceiling.pannel light
S & F water heater storage type (Geyser) vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection, having adjustable knob for temperature control and inner tank material of superior glass lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar pressure complete all as specified of capacity 25 ltr having heating element 2 KW and not less than 5 star rating with minimum two year warrant on product. Note : old unservicable geyser will be deposoted in MES yard.
S&F 15mm bore pillar tap of brass CP.
Schedule of Credit
Maninder Singh Lohia
M/S MSD & Associate
a.k constructions
LAMBA ENTERPRISES
SHREE RAM BUILD TECH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .