PROVISION OF ALUMINIUM SLIDING WINDOWS AT VARIOUS OFFICERS ACCN AT NDA KHADAKWASLA

Amount

Taking down chowakat with shutters of any description n exe 1.5 sqm each complete all as specified and directed.

Taking down chowakat with shutters of any description exe 1.5 sqm but not exc 4.0 Sqm each complete all as specified and directed.

S& F Powder coated (Wood grain finish) aluminium (minimum thickness of powder coating 50 micron) for shutters & frames of doors, windows (two track, three track, fixed) & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws,Supirior locking arrengement of each panel ,Aluminium handle of each panel and bearing of each panel all complete as per architectural drawings and the directions of Engineer-in-charge complete all as specified and directed.

Supply and fixing of 4mm thick sheet glass ordinary quality and glazing including solar film (design / color / shade of film as directed by Engr in Charge) fixed to aluminium window / ventilator shutters / steel windows etc including required EPDM rubber / neoprene gasket etc all as specified and directed

S & F Stainless steel wire cloth 0.36mm nominal dia for wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or screws including fillet complete all as specified and directed..

S & F for Mild Steel Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F Anodised aluminium door /window / Ventilator shutters/lowers, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

M & L for 16-18 mm Zed black Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including laid bedded over 20mm thick CM (1:6) bedding and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6. complete all as specified and directed.

Taking down cement plaster of any description incl racking out joints hacking for key and scrubbing down with water to remove dust etc complete all as specified and directed.

M&L for rendering 10mm thick cement plaster in CM (1:4) surface finished even and smooth without using extra cement complete all as specified and directed.

M & L Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified and directed.

M&L for Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc., complete all as specified and directed.

M & L for prepration of New / old treated surfaces and Washing, rubbing down and stopping of distempered and painted surfaces, applying two Coat of Oil bound distemper complete all as specified and directed.

M & L for prepration of New Steel Surfaces of any description and applying two coats of synthetic enamel paint on one coat of red oxid zink chrome, over 10cm in width or girth,not otherwise described complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surface 200 X300X7mm/450X300X7 mm / 600x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match colour of tiles over with 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry as a backing coat all as specified in patchwork n exc 1.00 Sqm each patch including dismentling of wall tile and floor tile complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Rounding to edges of stone slabs one edge, with semi circular shape and match with existing surface polish such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M & L for Providing, cement concrete in type B0 (1:2:4) (Using 12.5 mm size graged stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

SANDHYA ENTERPRISES (BID ID -3311055)

Mehta and Co. (BID ID -3311588)

Sarkar Enterprises (BID ID -3310706)

Prem Singh (BID ID -3310920)

R K Construction (BID ID -3310545)

SONU ENTERPRISES (BID ID -3311431)

SUN Enterprises (BID ID -3310683)