SPECIAL REPAIR TO OR MD ACCN BLDG NO NP 16 AND 18 AT SUNDER SINGH ENCLAVE UNDER GE (WEST) FEROZEPUR CANTT

Amount

Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered by Engineer-in-Charge in writing complete all as specified and directed.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and directed. Note :- Demolition of mud puska to be cut in average thickness from top surface of roof for creating the slope as directed

M&L 10 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 with water proofing compound @ 3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface for laying of water proofing membrane complete all as specified and directed. Note: WPC shall be measured and paid for separately.

M&L applying evenly a tack coat of Industrial Bitumen 85/25 at the rate of 1.2 Kg per sqm incl cleaning surfaces complete all as specified and directed.

M&L APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gm/Sqm ) land on primed surface by forced applicatio complete all as specified and directed.

M&L applying two coats of solar reflactive bituminous based aluminium Paint @ 0.1 kg per sqm over APP membrane complete all as specified and directed.

Supply only water proofing compound.

M&L brick tiles 40mm thick laid on mud mortar (mud phuska) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement and pointed flush as the work proceeds complete all as specified and directed.

All as per Srl item No 8 here-in-before but using old brick tiles retieved from dismantling under item No 1 here-in-before including cleaning and removal of mortar from tiles complete all as specified and directed.

M&L cover fillet in plain cement concrete 1:2:4, type B-0 (using 12.5mm graded stone aggregate) with min radius of 75mm thick as in roof and parapet wall junction , roof benching, kerbs, mud stop, coping, rounded or chamfered on edges, including necessary sloping on roof including form work complete all as specified and directed.

Dismantling of floor hearth and wall tilling including mortar bedding removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular),primium quality area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including screed bedding 15mm thick in cement mortar 1:6 complete all as specified and directed.

M&L Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular),primium quality on vertical surfaces such as in skirting /dado etc area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 10 mm thick rendering in cement mortar 1:4complete all as specified and directed.

M&L Glazed ceramicdisikelly coloured (colour & shade as approved) tile 450mmx300 & 7mm thick on vertical surface such as skirting / dados set and jointed in neat cement slurry over & including 10 mm thick rendering in cement mortar 1:4 and pointed in white/ coloured cement with pigment to match the colour of tiles complete all as specified and directed.

M&L cement concrete 1:2:4, type B-2, (using 40mm graded aggregate) as in foundation, filling and mass concrete and all other similar works complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep complete all as specified and directed.

M&L 75 mm thick cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub floors, sub bases, floors and paving etc.complete all as specified and directed.

M&L hardcore of gauge not exceeding 63mm, deposited spread and leveled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paverblocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. Makes:-SITCO, POOJA CONCRETE, MOHINDRA INDUSTRIES, KB SPUN, SARAL IMPEX, RANA TILES CO, SHINO TILES, RN TILES & PAVERS, SWASTIK ALW

M&L Granite(of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 10 mm thick plaster as in back coat cement mortar 1:4 complete including moulding at corners and polishing typecomplete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed.

Demolition of un-reinforced cement concrete in any position complete all as specified and directed.

M&L 50 mm thick cement concrete 1:3:6, type C-2 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.

M&L 3 mm thick glass dividing stripps,38 mm ( width of strip) and inserted in position to confirm to design complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed.

M&L brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed.

All as per Srl item No 26 here-in-before but using old bricks retrieved from demolition under item 25 here-in-before including cleaning and removal of mortar from old bricks complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and directed.

All as per Srl item No 28 here-in-before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each and removing to store complete all as specified and directed.

Resecuring or easing & adjusting, without taking down Shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

M&L pressed steel frames made of 1.25mm thick MS sheet of profile 105mmx60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

M&L pressed steel frames made of 1.25mm thick MS sheet of profile 125mmx60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

M&L pressed steel frames made of 1.25mm thick MS sheet of profile 75mmx50mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

M&L cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in filling of steel chowkhats including necessary form work complete all as specified.

M&L cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in bed block of hold fast, coping, including necessary form work complete all as specified.

M&L Solid PVC door frame of size 50mm x 4 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2004) complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed. Makes: Rajshri or equivalent in approved makes.

S&F 35mm thick, 2nd class hard wood (Hollock), plain framed, paneled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-8 complete all as specified and directed.

S&F 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8,complete all as specified and directed.

M&L medium density fibre board interior grade 18-20 mm thick solid construction type, fixed in repairs in Kitchen cabinets/ CBs doors shutters/ shelves ( horizontal or vertical of any type) on timber frame work /GI Flats orners with screws /nailscomplete all as specified and directed.

M&L 0.90 mm thick decorative laminate type -1, both sides of boards surface finish, (colour and pattern as approved) fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle single composite unit with glazed and gauged shutter both dovetailed or welded and mild steel 8mm square bar grill welded to frame with one shop coat of zinc chromate primer complete all as specified and shown on drawing No. CEJZ/TD-1019/08 & CEJZ/TD-1020/08 complete all as specified and directed.

S&F Factory made box type steel ventilator side/top hung with glazing bars or dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on drawing No. CEJZ/TD-1019/08 & CEJZ/TD-1020/08 complete all as specified and directed.

M&L preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide priming complete all as specified and directed.

M&L preparation of old steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint over a coat of redoxide priming complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified and directed.

M&L applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and directed.

S&F continuous (Piano) hinges M S bright finish or Electro galvanized 25 mm wide flaps (when open) including welding to existing frame complete all as specified and directed.

S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares not exceeding 0.50 Sqm complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples as in repair complete all as specified and directed.

S&F aluminium anodised tower bolts 150 mm long and fixed with steel screws complete all as specified and directed.

S&F butt hinges, 75 mm long extruded aluminium alloy with galvanised steel hing pins, anodised and fixed, type C-21 complete all as specified and directed.

S&F aluminium door handle, cast type, anodised 150 mm long and fixed with steel screws ccomplete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 300mm mild steel helical door spring including roller and roller plate complete all as specified and directed.

S&F 200mm long aluminium, anodised barrel tower bolts of extruded section,complete all as specified and directed.

S&F Mild steel butt hinges 125 mm long medium weight cold rolled with screwed with steel screw or welded to steel frame and fixed with steel screwscomplete all as specified and directed.

S&F 75mm size, aluminium (cast type) anodized, handle and fixed with screws complete all as specified and directed.

S&F Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified and directed.

S&F in repair 20 mm dia curtion rod powder coated fixed with fancy type chromium plated with bracket complete all as specified and directed.

S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete GDE Fe410-0 or Fe 310-O complete all as specified and directed.

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:4 on any face of brick walls or concrete surfaces, finished even and fair without using extra cement complete all as specified and directed.

M&L rendering 10mm thick in cement mortar 1:6 on any face of brick walls or concrete surfaces, finished even and fair without using extra cement complete all as specified and directed.

M&L rendering 5 mm thick cement plaster on ceiling surfaces in cement mortar 1:3 finished fair and even without using extra cement complete all as specified and directed.

M&L preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over 1mm thick wall care putty complete all as specified and directed.

M&L preparing newly plastered surfaces of wall and applying 2 coats of distemper oil emulsion over 1mm thick wall care putty complete all as directed of any shade on walls surfaces complete all as specified and directed.

M&L preparation of old treated plastered surfaces including complete removal of existing treatment and applying two coats of cement base paint complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls etc., and applying three coats of white wash complete all as specified and directed.

M&L preparation of old plastered surfaces of walls & applying one coat coat of white washcomplete all as specified and directed.

M&L white wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L white wash in one coat on old plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed.

Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed.

S&F galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and directed.

S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified and directed.

S&F chromium plated fancy type 1-way angle cock with flange suitable for 15mm bore pipe,complete all as specified and directed.

S&F chromium plated bib tap for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed.

S&F in repairs brass chromium plated long body bib tap for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed.

S&F stop valves, fancy type, CP with long shank and cup ( concealed type ), screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed.

S&FLow density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end)etc suitable for 15mm bore of pipe as in repair complete all as specified and directed.

S&F125mm dia PTMT grating fixed over trap with cement complete all as specified and directed.

S&F Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed to walls with steel screws and wooden/rawl plugs as in repairs complete all as specified and directed.

S&F piller taps, chromium plated, screwed down, high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed complete all as specified and directed.

S&F Soap dish of CP fixed to wall with steel screws and pvc rawl plug complete all as specified and directed.

S&F in repair Vitreous china squatting pan, Orissa pattern, size 580mmx440mm white/ coloured with integral foot rests including flush pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc.complete all as specified and directed.

S&F Vitreous china wash basin, white/ coloured, flat back, size 550mmx400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified and directed.

S&F in repairs CP Health Faucet ABS body (Push type) with wall hook and 1.0 mtr SS Braded rubber hose pipe complete all as specified and directed.

S&F in repair sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 mm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern) white,incl. trap, connection to drain and flushing pipe including seat cover for pedstal pan complete all as specified and directed

S&F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and waste coupling and pipe including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410 mm x 330mm x 160mm complete all as specified and directed.

S&F in repair Stainless steel plate rack of standard pattern & of size 900mm x 750mm x 250 mm.The thickness of stainless steel sheet shall be 1.00 mm & grade of sheet shall be 304 AISI including fixing to wall with 4 Nos 50mm screws & PVC rawl plugs complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore dia of outlet of pipe complete all as specified and directed.

S&F in repair PVC cabinet mirror of size 450x 600 mm complete all as specified and directed. Makes:- Prayag or equivalent in approved makes.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layer not exceeding 25cm hard and dense soil complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crame gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections), including distance pieces, cleats etc complete all as specified and directed.

M&L Pre painted galvatume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling asbestos cement/PVC pipe including clamps complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) bends ad provided with access door complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm dia complete all as specified and directed.

Taking down carefully copper /aluminium point wiring (light, fan , socket or power ) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including rigid non-metallic PVC conealed conduit, with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.

(b) One socket outlet on the same board controlled by one single pole one way switch

(c) One 5 amps socket outlet independent controlled by one single pole 5 Amp switch.

All as per Srl Item No 112 here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.

S&F Switch piano flush type single pole one way 5/6 Amp complete all as directed.

S&F Switch piano flush type 15 amps, single pole one way duly ISI marked.

S&F Socket outlet 2 in one , 5/6 Amps flush type ISI marked.

S&F Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type ISI marked.

S&F bell push flush type 5 Amps duly ISI marked.

S&F ceiling rose, PVC/Polycarbonate,isolated three terminals.

S&F lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulb omplete all as specified and directed.

S&F bell ding dong type AC 230 Volt single pole.

S&F in repair stepped type electronic fan regulater flush type on the existing phenolic laminated sheet etc. as reqd complete all as specifed and directed

S&F LED tube light fitting 1 X 18 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Cat Part No LHEXBLP7UN1W018 Make - Havells or equivalent to Crompton/Bajaj/Philips

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.

S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type)fitted with ABS frame and 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified

S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed

S&F MCCB 100 Amps, 415 volts, 16 KA, 4 Pole complete all as specified and directed

S&F MCB, Single pole 240 V,6 - 32 Amps 10 KA 'B Series complete all as specified and directed

S&F in repair MCB single pole (SP) 240 volts, 40 Amps, 10 KA 'B' Series complete all as specified and directed

S&F MCB, Single Pole and neutral 240 V, 32 Amps 10 KA 'B' series complete all as specified and directed

S&F Sheet Metal Enclosures with Socket plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amp complete all as specified and directed.

S&F sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia complete all as specified and directed Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core,one run of PVC conduit shall be measured as single run.

M&L Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm & 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) complete all as specified and directed.

Supply and laying cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 4 core complete all as specified and directed

Excavation in trenches not exceeding 1.5m wide and not exceedng 1.5m depth and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling, including spreading, levelling, watering and well ramming in layrs not exceeding 25cmin soft/loose soil complete all as specified and as directed.

Removing surplus soil to a distance not exceeding 50m and dpositing where directed at a level not exc. 1.5m above the starting point complete all as specified and as directed.

M&L sand filling under floors, foundation or cable protection including spreding leveling in layer not exceeding 25cm thick complete all as specified and directed.

M&L bricks common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry width wise acrose the line of cable in trenches for protection of undergroud cable complete all as specified and directed.

S&F Mild steel galvanised iron pipe light grade (ISI marked) 40mm bore for passing of earth lead laid in trenches fixed to walls laid under floors, roads including all fittings i.e MS clamps nuts & bolts etc as required complete all as specified and directed

Manjeet Singh Contractor (BID ID -3472438)

shivam builders (BID ID -3472303)

M/S N Maini Constrution (BID ID -3472168)

Vee Vee Enterprises (BID ID -3472781)

manoj and company (BID ID -3472229)

M/S Pee Kay Builders (BID ID -3472614)

HAPPY ELECTRICALS (BID ID -3472868)