Heavy repair and replacement of doors and windows and Repair to corroded water supply pipeline & Cleaning of Jungle/Grass/Bushes wood/Sapling etc. from sides of approach roads and nearest staff quarter in colony no.1 to 4 at FZR and Repair and maintenance of Community hall at FZR in the jurisdiction of SSE/W/FZR under ADEN-1/FZR.

Item Breakup - A-CPWD DSR 2021-Ver-2

prepare the surface even and smooth complete. 13.80 Providing and applying white cement based Sqm 100 123.85 12385 putty of average thickness 1 mm, of approved 4 brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved 13.81 brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 5 13.81.2 Two coats Sqm 2500 90.05 225125 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and 13.82 manufacture, including applying additional coats wherever required, to achieve even shade and colour. 6 13.82.2 Two coats Sqm 758 116.05 87965.9 Applying priming coats with primer of approved 13.85 brand and manufacture, having low VOC (Volatile Organic Compound ) content. FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY Painting with synthetic enamel paint of 13.99 approved brand and manufacture of required colour to give an even shade : 7 13.99.1 One or more coats on old work Sqm 1000 86.55 86550 Finishing walls with water proofing cement paint 13.109 of required shade : 13.109.2 Old work (one or more coats @ 2.20 kg/10 sqm) Sqm 2000 63.25 126500 8 complete. Total 1432790.90 Item- 11 CODE-14 REPAIRS TO BUILDING S No. Item No Description of Item Unit Qty Rate Amount 14.0 REPAIRS TO BUILDING 14.13 Regrading terracing of mud phaska covered Sqm 1000 577.9 577900 with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 1 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-Charge. Total 577900.00 Item- 12 CODE-15 DISMANTLING AND DEMOLISHING S No. Item No Description of Item Unit Qty Rate Amount 15.0 DISMANTLING AND DEMOLISHING Demolishing brick work manually/ by mechanical means including stacking of 15.7 serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 1 15.7.4 In cement mortar cum 5 1698.45 8492.25 Taking out doors, windows and clerestory 15.13 window shutters (steel or wood) including stacking within 50 metres lead : 2 15.13.1 Of area 3 sq. metres and below Each 410 118.3 48503 Dismantling tile work in floors and roofs laid in 15.23 cement mortar including stacking material within 50 metres lead. 3 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 150 60.5 9075 15.27 Demolishing mud phaska in terracing and cum 50 753.75 37687.5 4 disposal of material within 50 metres lead. 15.60 Disposal of building rubbish / malba / similar cum 700 219.35 153545 unserviceable, dismantled or waste materials by mechanical means, including loading, 5 transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- charge, beyond 50 m initial lead, for all leads including all lifts involved. Total 257302.75 Item- 13 CODE-17 SANITARY INSTALLATIONS S No. Item No Description of Item Unit Qty Rate Amount 17.0 SANITARY INSTALLATIONS Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.1 manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY 17.1.1 White Vitreous china Orissa pattern W.C. pan of Each 4 5781.35 23125.4 1 size 580x440 mm with integral type foot rests 17.1.2 Stainless Steel AISI-304(18/8) Orissa pattern Each 5 10076.15 50380.75 2 W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.2 manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic seat Each 5 5540.55 27702.75 3 and lid Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing 17.4 cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.4.2 Range of two urinal basins with 5 litre white Each 2 8115.55 16231.1 4 P.V.C. automatic flushing cistern 17.7A Providing and fixing wash basin with C.I. Each 9 3459.05 31131.45 brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and 5 making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer 17.8 Providing and fixing white vitreous china Each 9 1500.05 13500.45 6 pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 17.31 Providing and fixing 600x450 mm beveled edge Each 20 1411.15 28223 mirror of superior glass (of approved quality) 7 complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 17.34 Providing and fixing toilet paper holder : 8 17.34.1 C.P. brass Each 5 680.8 3404 Total 193698.90 Item- 14 CODE-18 WATER SUPPLY S No. Item No Description of Item Unit Qty Rate Amount 18.0 WATER SUPPLY 18.1S PE-AL-PE COMPOSITE PRESSURE PIPE Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 deg. Celsius, including all special fittings of composite material 18.2 (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge, Concealed work, including cutting chases and making good the wall etc. 1 18.2.1 1216 (16 mm OD) pipe Metre 400 513.75 205500 18.7S C.P.V.C. PIPES FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY Providing and fixing G.I. pipes complete with G.I. 18.10 fittings and clamps, i/c cutting and making good the walls etc.-Internal work - Exposed on wall 2 18.10.2 20 mm dia nominal bore Metre 400 373.35 149340 Providing and fixing G.I. pipes complete with G.I. 18.12 fittings including trenching and refilling etc.- External work 3 18.12.3 25 mm dia nominal bore Metre 800 417.95 334360 4 18.12.5 40 mm dia nominal bore Metre 1800 558.35 1005030 5 18.12.6 50 mm dia nominal bore Metre 500 654.2 327100 Making connection of G.I. distribution branch with G.I. main of following sizes by providing 18.13 and fixing tee, including cutting and threading the pipe etc. complete : 6 18.13.1 25 to 40 mm nominal bore Each 100 757.1 75710 18.15S BRASS FITTINGS Providing and fixing gun metal gate valve with 18.17 C.I. wheel of approved quality (screwed end) : 7 18.17.1 25 mm nominal bore Each 20 532.35 10647 8 18.17.1A 20 mm nominal bore Each 250 461.75 115437.5 9 18.17.3 40 mm nominal bore Each 20 707.3 14146 10 18.17.4 50 mm nominal bore Each 10 878.25 8782.5 Providing and fixing uplasticised PVC connection 18.21 pipe with brass unions : 18.21.2 45 cm length 11 18.21.2.1 15 mm nominal bore Each 120 85.2 10224 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Litre 20000 9.7 194000 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking 12 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass long body bib 18.51 cock of approved quality conforming to IS standards and weighing not less than 690 gms. 13 18.51.1 15 mm nominal bore Each 10 708.4 7084 Providing and fixing C.P. brass stop cock 18.52 (concealed) of standard design and of approved make conforming to IS:8931. 14 18.52.1 15 mm nominal bore Each 10 594.75 5947.5 Providing and fixing C.P. brass angle valve for 18.53 basin mixer and geyser points of approved quality conforming to IS:8931 15 18.53.1 15mm nominal bore Each 20 500.35 10007 18.54S PTMT FITTINGS Providing and fixing PTMT bib cock of approved 18.54 quality and colour. 18.54.1 15mm nominal bore, 86 mm long, weighing not Each 200 109.85 21970 16 less than 88 gms Providing and fixing PTMT stop cock of approved 18.55 quality and colour. 18.55.1 15 mm nominal bore, 86 mm long, weighing not Each 200 103.15 20630 17 less than 88 gms Providing and fixing PTMT pillar cock of 18.56 approved quality and colour. 18.56.1 15 mm nominal bore, 107 mm long, weighing Each 50 180.8 9040 18 not less than 110 gms Providing and fixing PTMT grating of approved 18.58 quality and colour. FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY 18.58.1 Circular type 19 18.58.1.2 125 mm nominal dia with 25 mm waste hole Each 20 45.25 905 Total 2525860.50 Item- 15 CODE-21 ALUMINIUM WORK S No. Item No Description of Item Unit Qty Rate Amount 21.0 ALUMINIUM WORK Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with 21.1 required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 100 433.95 43395 1 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever 21.1.2 required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or Kg 100 531.8 53180 2 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness Sqm 10 1325.55 13255.5 3 (weight not less than 12.50 kg/sqm) Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, 21.4 embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 21.4.1 With stainless steel cover plate minimum 1.25 Each 4 2448.85 9795.4 4 mm thickness Total 119625.90 Item- 16 CODE-22 WATER PROOFING S No. Item No Description of Item Unit Qty Rate Amount 22.0 WATER PROOFING 22.12 Supplying and applying bituminous solution Sqm 20000 50.25 1005000 1 primer on roof and / or wall surface at 0.24 litre per sqm. FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY 22.22A P r o v i d i n g and applying fibre reinforced Sqm 800 474.15 379320 elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the 2 ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. Total 1384320.00 Item- 17 CODE-26 NEW TECHNOLOGIES AND MATERIALS S No. Item No Description of Item Unit Qty Rate Amount 26.0 NEW TECHNOLOGIES AND MATERIALS Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter-locking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of 26.23 size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer- in-Charge. 26.23.1 With 15 mm thick integral densified micro edge Sqm 20 2055.65 41113 1 light weight calcium silicate false ceiling tiles Total 41113.00

Item Breakup - B-NR-HQ-IR-USSOR 2021-3-Ver-3

JCB Backhoe Loaders 3DX Plus or similar with Hour minimum 1.10 cum bucket capacity Total 51521.40

Item Breakup - C-NS ITEMs

NS-01 Providing and fixing 110mm dia PVC soil, Metre waste and vent pipes including jointing and cost of spun yarn and sand etc complete (USSOR item no. 154010) (205.50+8.35%=222.66) Total 22266.00