ADD/ALTN TO BLDG NO P-2, P-3, T-3 AT AF STN PALAM UNDER AOR OF GE (AF) FARIDABAD

Amount

Demolition of Brickwork or stone/ boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but including ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

All as per item No 02 above but except bricks.

M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as specified and directed.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 10mm thick ready mix cement plaster with bulk density 1.4 to 1.70 kg per ltr water ratio 17 to 19% by weight with compressive str as per IS 4031 part-VI applied as per the manufacture instr incl necessary cement screed and preparation of surface to received ready mix plaster upto 10m height complete all as specified and directed by Engr-in-charge.

M&L for 15mm thick ready mix cement plaster with bulk density 1.4 to 1.70 kg per ltr water ratio 17 to 19% by weight with compressive str as per IS 4031 part-VI applied as per the manufacture instr incl necessary cement screed and preparation of surface to received ready mix plaster upto 10m height complete all as specified and directed by Engr-in-charge.

M&L for 5mm thick ready mix cement plaster with bulk density 1.4 to 1.70 kg per ltr water ratio 17 to 19% by weight with compressive str as per IS 4031 part-VI applied as per the manufacture instr incl necessary cement screed and preparation of surface to received ready mix plaster upto 10m height complete all as specified and directed.

M&L for Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm on new surfaces and obtain smooth finish using sand paper complete all as specified and directed.

M & L for preparation of new plastered surface and applying three coats of white wash on ceiling complete all as specified and directed.

M & L for preparation of old surfaces by removal of existing treatmen and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for preparation of new plastered surface and applying on walls/ceiling and applying two coat of plastic emultion paint and applying one coat of wall care putty 3mm thick for complete smooth surfce complete all as specified and directed.

M&L for preparation of old surfaces on walls/ceiling surface obtain smooth finish using sand paper incl complete removal of existing treatment and applying two coats of plastic emulsion paint over a coat of acrylic primer incl one coat of wall care putty 3mm thick for smooth surface as per manufactures instruction , complete all as specified and directed.

M&L for preparation of old surfaces on walls/ceiling surface obtain smooth finish using sand paper incl complete removal of existing treatment on wall/ceiling, roof boarder, drops, fins, chajja / roof facia, column etc and applying two coats of exterior emulsion paint over a coat of acrylic primer as per manufactures instruction, complete all as specified and directed.

M&L for preparation of new plastered surface on walls/ceiling,roof boarder, drops, fins, chajja / roof facia, column surface obtain smooth finish using sand paper and applying two coats of exterior emulsion paint over a coat of acrylic primer as per manufactures instruction, complete all as specified and directed.

M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A' in on concrete slab 100mm complete all as specified and directed.

M&L for Plain, Aluminium sheeting 0.56 mm thick, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises complete all as specified and directed.

M&L for premium quaility non skid ceramic coloiured tiles joint free 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles over and incl,15 mm thick rendering in bedding layer or screed bed in cement mortar (1:6) in floors etc complete all as specified and directed.

M&L for premium quaility Glazed ceramic colour tiles joint free in vertical surface350x250x7/ 450x350x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with tiles over and including 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting in vertical surface etc complete all as specified and directted. Note : Shade & design of tiles as approved by EIC/GE.

M&L for vitrified tiles 9 to 10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm but not exc 1.00 Sqm in floors, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM (1:4) for laying floor finishes having ultra/double charged/HD Vitrified tiles complete all as specified and directed.

M&L for Vitrified tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.36 sqm but n exc 0.42 sqm, in floors, dado , skirting etc. set and jointed in neat cement slurry over and incl 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and pointed in white or coloured cement to match and incl dismantling / demolition of old tiles and rubbish off the primises etc complete all as speciefied and directed.

M&L for 18 to 20 mm thick Kota stone slab flooring (Machine cut) with mirror polishing of any size laid over and incl 20mm thick bedding layer in cement mortar 1:6 over 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone agg. ) in sub base of flooring for laying floor finishes over neat cement slurry @ 3Kg/sqm over sub base , jointed and pointed in grey cement mixed with pigment to match the shade of slab including rubbing and polishing to achieve mirror finish complete as in flooring complete all as specified and directed.

M & L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over and incl 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, incl dismantling old u/s complete all as specified and directed.

M&L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick 1:3 cement mortar jointed and pointed in grey cement mixed with pigment to match the shade of slab including rubbing and polishing to achieve mirror finish complete all as specified and directed.

M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and dismantling complete all as specified and directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 sqm each and complete all as specified and directed.

M&L for factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification & drawing and complete all as specified and directed.

S&F Pressed steel frames of size 105x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F Pressed steel frames of size 125x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type C0 (1:3:6 ) (using 12.5mm graded stone aggregate) ,etc complete all as specified and directed.

M&L for factory made, 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass / gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part - I section 8.20 (a), complete all as specified and directed.

S & F in repair for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed.

S&F 35 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides face is covered with decorative face with lipping/frame to match complete all as specified and directed.

S&F for Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC sheet on the front face & 2 mm thick prelam PVC sheet on back side, supplying & fixing in frame at site as per specification & drawing and complete all as specified and directed.

M&L for aluminium Anodized powder coated fixed with frame of partiton or window / ventilator , aluminium section weighting not less than 0.55kg/RM incl 65 mm thick sheet glass oridinary quality ' frosted glass or ACP sheet joining with rubber beading , aluminium snap beading complete all as specified and directed.

S&F aluminium wire guard mesh of 4mm nominal dia of wire and average width of aperture 75 - 85mm and fixed with aluminium frame / staples complete all as specified and directed.

M&L for 4.8 mm thick float glass ordinary quality' frosted glass and glazing with aluminum beeding and gasket to aluminum framework in square exc 0.50 sqm in each pane in repair complete all as specified and directed.

Easing andAdjusting aluminium door and window including refixing beading after replacement of defective portions such as door closer, aluminium handles, hinges, locks, new rubber gasket, aluminium beading, preleminated prarticle board, sheet glass etc complete all as specified and directed. Notes : Door closer, door spring, aluminium beading, preleminated gasket, aluminum beading, preleminated particle board, sheet glass shall be measured and paid separately under respective item of schedules.

S&F of floor door spring etc complete all as specified and directed.

S&F of door closer hydraulically regulated design No 2etc complete all as specified and directed.

S&F of 75mm Mortice lock vertical type 4 lever etc complete all as specified and directed.

S&F of Neoprene/EPDM Rubber gasket for fixing aluminium door and window shutters etc complete all as specified and directed.

S&F of aluminium beading for fixing of aluminium door and window shutter etc complete all as specified and directed.

S&F of 150 mm long aluminium tower bolts for aluminium door and window shutter etc complete all as specified and directed.

S&F of aluminium handles 150 mm long for aluminium door and window shutter etc complete all as specified and directed.

S&F of aluminium handles 100 mm long for aluminium door and window shutter etc complete all as specified and directed.

S & F for 3mm thick sheet glass ordinary quality glazing with oil putty in square n exc 0.5 sqm quality or description from steel frame and complete all as specified and directed.

S&F 10 to 12 mm thick frosted glass door with 08 Nos of holes and two steel hinges and steel handles not less than 300 mm long on both sides of door, incl necessary locking arrangement complete all as specified and directed.

M&L for 18mm thick water proof solid MDF Board prelaminated both sides of approved shade fitted with necessary arrangement as in kitchen cabinet back sides, partition, shutters and shelves, etc., fixed with solvent cement adhesive and stainless steel screws and providing 1mm thick PVC lipping to exposed edges, complete all as specified and directed.

S & F for 30 mm Continuous (piano) hinges, mild steel, bright finish or elec trogalvanised complete all as specified and directed.

S&F for Magnetic catcher suitable for kitchen cabinet shutters, complete all as specified and directed.

S&F for 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repair for Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts 150mm long (ISI Marked) complete all as specified and directed.

S&F for aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked) complete all as specified and directed.

S&F for Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, 300mm long, complete all as specified and directed.

S&F for Extruded brass handles, fabricated type polished 150 mm long complete all as specified and directed.

M & L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface plain or moulded, n exc 10cm width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed.

M & L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth exc 10cm complete all as specified and directed.

M&L for one coats of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.

M&L in repair of one piece closet with bowl for coupled WC with PP soft seat cover , hinges fixing accessories and accessories set of size 360x640x680 mm, strap 220 mm withsyphonic flushing cistern with necessary fittings complete all as specified and directed.

S&F in repair wash hand basin table top of size 600x400x175 mm vitrous China including , waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed.

S&F in repair Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S & F in repair Bib tap CP fancy type long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings complete all as specified and directed.

S& Fix in repair Stop cock /angle CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed.

S&F in repair for wall mixturer 3 in 1 system with provision for both hand shower and overhead shower with 115 mm long bend pipe, connecting legs and wall flanges (Without hand & overhead shower). complete all as specified and directed.

S&F for CP brass Centre hole mixer without pop up waste system with 450 mm long braided hoses, 20mm cartridge size for mixing hot and cold water screwed down for iron pipe for WHB, in repairs complete all as specified and directed.

S&F in repair for CP telephonic jet with all fitting and fixture for EWCs with 8 mm Dia 1.2mt length long flexible tube of complete all as specified and directed.

S&F for cabinet PTMT of 400mm x 500 mm with megnetic looking arrangements fixed with and inclduling chromium plated brass screws and PVC rawl plugs complete all as specified and directed.

S&F for Brass chromium plated shower rose of 200mm size with arm and with or without swivel joints, complete all as specified and directed.

S & F for vitrious china sensor urinals size-485x300x740 mm including all necessary fittings etc complete all as specified and directed.

S & F for 8 mm thick toughend frosted glass urinal partitions including all necessary stainless steel fitting etc complete all as specified and directed.

S&F for Soap tray brass chromium plated and fixed to plugs on wall with brass screws, complete all as specified and directed.

S&F for Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F for Towel ring brass chromium plated, fixed with brass screws and plugs, complete all as specified and directed.

S&F for PVC connections 60cm long superior quality with PTMT nut on both side complete all as specified and directed.

S&F in repair grating round 100 mm size of CP complete all as specified and directed.

M & L for viterous china squating pan of (Orrissa Pattern) size 580x440 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed in repair including lime concrete bedding as required set complete all as specified and directed.

S&F in repair of PVC flushing cistem low level white with all accessories of 10 ltrs capacity incl flushing pipe, brackets and taking down of old CI/PVC flushing cistern complete all as specified and directed.

S & F in repair for CP towel racks with lower hanger complete all as specified and directed.

S&F for rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) of 500 ltr capacity, hoisted and fixed repair in position including 20 mm dia float valve with aluminium fitting, dismantling existing water tank complete all as specified and directed.

S&F for rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) of 1000 ltr capacity, hoisted and fixed repair in position including 20 mm dia float valve with aluminium fitting, dismantling existing water tank complete all as specified and directed.

S&F in repair for 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair for 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixedcomplete all as specified and directed.

S&F for 20mm dia Nipple suitable for HDPE water tank.(Minimum weight 15mm-38gms/20mm 45gms /25mm- 65gms) complete all as specified and directed.

S&F 15 mm dia Unions. brass to connect iron to polyethylene and fixed complete all as specified and directed.

S&F 20 mm dia Unions. brass to connect iron to polyethylene and fixed complete all as specified and directed.

S&F stainless steel pegset of six suitable size of length etc, complete all as specified and directed.

Taking up or down 15 mm dia bore steel tubing and connection including cleaning for refixing or removed to store complete all as specified and directed.

S&F for GI tubing 15mm bore medium grde with all fittings and fixed complete to wall and ceiling or laid in floors etc incl cutting chases in brick wall pinning in making good in CM 1:3 to facings where required complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F for 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors incl taking down old pipe complete all as specified and dirtected.

S&F for 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc incl taking down old pipe complete all as specified and dirtected.

S&F for 75mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints,laid in trenches or in floors etc complete incl taking down old pipe complete all as specified and dirtected.

S&F for 75mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc complete incl taking down old pipe complete all as specified and dirtected.

S&F for 100mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and dirtected.

S&F 75mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and dirtected.

S&F for 100mm branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches/ Tee etc complete all as specified and dirtected.

S&F for 75mm branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches/ Tee etc complete all as specified and dirtected.

S& F for 75 Cast Iron Cowl complete all as specified and dirtected.

S& F for 100 Cast Iron Cowl complete all as specified and dirtected.

S&F for 75mm dia of outlet cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and dirtected.

S&F for 100mm dia of outlet cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and dirtected.

S&F for 110mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings specifed

All as per ser item No 105 above but laid in trench or in floor

S&F for 110mm bore PVC bends/junction any radius complete all as specified and directed. .

S&F for 110mm bore PVC bends/junction with access door any radius complete all as specified and directed. .

S&F for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. .

S&F for 75mm dia PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. .

S&F for 75 mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings complete all as specified and directed.

All as per item No 111 above but laid in trench or in floor complete all as specified and directed.

S&F for 75 mm bore PVC bends/junction any radius complete all as specified and directed. .

Taking down old roof treatment in any description incl scrube and remove loose concrete, brick tiles, mud fuska, plaster, bitumen, oil grases and any other materials that might effect adhesion by wire brushing the surface and cleaning of the surface throughly with water and disposed off old materials complete all as specified and directed.

M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3.5 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed.

M&L for 50mm thick cement concrete 1:2:4 type B-0 ( using 12.5mm graded stone aggregate) as in padding/ base on roof complete all as specified and directed.

M&L for cement concrete type B0 1:2:4 (12.5 mm graded stone agg) providing in roof kerbs or mud stops, rounded or chamfered on edges on roof complete all as specified and directed.

M&L for Rendering 10mm thick on concrete surfaces in CM 1:3 mixed with WPC and finishing the surface fair and even complete all as specified and directed. Note : - WPC shall be measured & paid seprately.

Supply only liquid waterproofing compound complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for RCC Nominal mix type B1 1:2:4 (20mm graded stone aggregate) in landings, Slab, chajjas,shelves and similar articles with plain faces, set in cement mortar 1:4 including necessary form work complete all as specified and directed.

M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the mild steel wire (annealed) not less than 0.9mm dia or securing with clips and complete all as specified and directed.

All as per item No 122 above but 6 to 8 mm dia and over and including in stirrups, spacers and binders.

Demolition of cement concrete unreinforced in ground floors and paving n. exc 15 cm thickness below or above gound level , concrete debris and rubbish to a distance n exc 100m as directed by the EIC.

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone agg. ) as in plinth protection / path/ any paved area complete all as specified and directed.

Dismantling wall ceiling and boards, (fibere pulp, insulation etc. or insulation boards abdy thickness including cover fitllets complete all as specified and directed.

M&L for PVC wood or any designe super heavy premium quality flute or plane in panelling 8 to 9 mm thick on wall / ceilling with incl necessary frame work in Design POPUP pattern and any colour approved by engr-in-charge, inclusive of fixing on to ceiling incl moulding end caps fixed with PVC sleeves and screws as required at site complete all as specified and directed.

Excavating in trenchs n exc 1.5m in depth and n exc 1.5m wide for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out soft/loose soil complete all as specified and directed.

M&L for PCC 1:2:4 type C-2 (40 mm graded stone aggregate) in foundation filling and mass concrete for bottom of manhole complete all as specified & as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified & as directed.

Removing excavated soil material to a distance n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified & as directed.

M&L 15 mm thick rendering in cement mortar 1:3 in side and out side wall of manhole,septic tank etc of brick work/concrete surfaces finished even and smooth ( With out using extra cement) complete all as specified & as directed.

M&L for precast RCC type B1 1:2:4 (20mm graded stone aggregate) as in cover slab for man hole and similar article with plain face and set in cement mortar 1:4 complete all as specified & as directed.

Supply and laying in trenches, jointing and testing salt glazed stoneware pipe grade 'A' drainpipe 150mm bore conforming to IS at any depth over PCC 1:3:6 type C-2 (using 20mm graded crushed stone aggregates) for bed of sewage lines of 150mm dia including packing under haunching against the sides of pipe after they are laid and tested complete (all as per specified in SSR part-I clause 18.68.2) complete all as specified & directed. Note : Excavation and earth work shall be measured and paid for separately under appropriate items of Sch. 'A'.

Taking Down carefully Copper/aluminium Point Wiring (light, fan,socket or Power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators sockets etc, removing materials to store for keeping in safe custody or for taking credit as per condititions seperately and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for point wiring complete with 1.5 sqmm single core multistranded copper conductor PVC insulated and unsheathed cable 1100 volts grade FRLS cable IS-694 marked drawn through and including rigid non metallic PVC heavy duty concealed conduit(min 20 mm dia (external) but shall be increased as per actual site requirement in accordance with clause 19.12.5 of SSR Part I ) ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends.tees, juction boxes etc fixed concealed in wall/ceiling or surface conduit on ceiling with provision of 2 mm thick pressed steel terminal boxes covered with 3 mm thick plastic laminated white /coloured top cover for mounting switch,socket,fan regulator,industrial socket and all lamp fittings etc including 1.5 sq mm PVC insulated but unsheathed copper conductor FRLS cable,1100 volt grade IS-694 marked as earth contuinity wire for one light/Fan point controlled by one,one way switch complete all as specified and directed by Engr-in-charge

All as per item No. 136 above but on the same board with other switches.

All as per item No. 136 above but one three pin 5 Amps socket out let on independant board.

All as per item No. 136 above but 15 Amps 3 pin socket outlet on independent board with 2.5 sq mm PVC insulated and sheathed copper conductor with 2.5 sq mm PVC insulated copper conductor single core for continuous earthing complete.

All as per item No. 136 above but one bell/buzzer point controlled by one push button on same board with other switches.

All as per item No. 136 above but for Single pole and neutral enclosure with 4.0 sq mm PVC insulated and sheathed copper conductor with 4.00 sq mm PVC insulated copper conductor single core for continuous earthing complete.

All as per item No. 136 above but one light point controlled by two 2 way 5 Amps switch.

Taking down carefully aluminum two core sub main wiring of sizes 4 Sqmm /6 Sqmm cable any type and removing old material from site and making good disurbed surface complete all as specified and directed.

M&L for, two single core PVC insulated cable with copper conductor multi stranded 6 Sqmm in and incl. duly drawn through and including concealed PVC conduit suitable size ISI marked medium grade as sub main with continuous earth wire 6 Sqmm size and connecting to common earth dolly all complete all as specified and directed by Engr-in-charge.(Flexible Copper Wire Used In FRLS)

M&L for, two single core PVC insulated cable with copper conductor multi stranded 4 Sqmm in and incl. duly drawn through and including concealed PVC conduit suitable size ISI marked medium grade as sub main with continuous earth wire 4 Sqmm size and connecting to common earth dolly all complete all as specified and directed by Engr-in-charge.(Flexible Copper Wire Used In FRLS)

S&F Piano switch, flush button single pole one way 6 Amp complete all as specified and directed.

Supply and fix switch flush type 5 Amps single pole two way complete all as specified and directed.

S&F socket outlet, flush type 2 in 1, 3 pin 6 Amp complete all as specified and directed.

S&F socket outlet, flush type 2 in 1, 3 pin and 6/16 Amp complete all as specified and directed.

S&F Piano switch flush button single pole one way 16 Amp complete all as specified and directed.

S&F stepped type electronic fan regulator, in repairs, flush type on the existing phenolic laminated sheet etc complete all as specified and directed.

S & F Sheet metal Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 V complete all as specified and directed.

Supply and fix sheet metal enclosures for MCB distribution board 230 Volts Single pole and neutral 8 way Double door with 200 Amps rated busbar complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface complete all as specified and directed.

S&F in repairs,MCB SP 6-32 Amps,"B" series 240 Volts complete all as specified and directed.

S & F in repairs,MCB SPN 32 Amps,"B" series 240 Volts complete all as specified and directed.

S & F in repairs Bell Multi Music type, 240 Volts complete all as specified and directed.

S&F bell push, in repairs, flush type 5 Amps complete all as specified and directed.

S & F in Repairs Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F in repairs,ceiling rose surface backlight, 65 x 50 mm three terminals complete all as specified and directed.

Supply and fixing LED , Tube light fitting 20 W, 6500K Intenso AX LED batten aluminium profile self ballasted surface mounted LED Batten extruded aluminium body with PC diffuser in unic shape. >180º wide light distribution. soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting complete all as specified and directed.

Supply and fixing LED , Tube light fitting 12 W, 6500K Intenso AX LED batten aluminium profile self ballasted surface mounted LED Batten extruded aluminium body with PC diffuser in unic shape. >180º wide light distribution. soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting all as specified and directed.

S&F in repair energy efficient LED building secruity lights 1x30W with lens, PDC aluminium body and toughened glass visor fitted in frame secondary optical lens for superior light distribution efficay >100 Lm/W, CCT 5700K, IP-65 complete with bracket/clamps, nut bolts and washers suitable for fitted in building all as specified and directed.

Supply and fix BLDC fan energy efficient ceiling fan sweep size 1200mm, 3 aerodynamically designed blades with speed 350rpm motor air delivery 220cmm input power 28W-32W and having remote control complete all as specified and directed.

S&F Fresh Air fan 250 mm sweep, 240 Volt AC single phase completed all as specified and directed.

M & L in repairs earthing complete with galvanised steel earth plate electode 600 x 600 x 6.0 mm thick burried directly in ground earth pit not less than 2.25 mtr deep below ground level connected to & including galvanised steel wire 4.0 mm dia size means of nuts and bolt check nuts and washers of galvanised rion sheet all as shown in electrical plate Nos 5 of SSR Part - I and connected to earthing test point complete including testing filling of adquate quantity of charcoal dust and common salt including refilling earth and removal of surplus soil upto 50 mtrs PCC 1:3:6 type CI chamber precast RCC cover 40 mm thick reinforced with 6 mm dia MS bar 3 Nos both way with handle made out of 8 mm dia MS bar water pipe with wire mesh and connecting testing etc complete all as specified and directed.

Singh Associates (BID ID -3488756)

Kunal Construction Co. (BID ID -3492209)

SAGAR ENTERPRISES (BID ID -3487989)