ADDN/ ALTN TO BLDG NO P-87 (OR MD ACCN) OF VEER NIWAS AT MCMM JABALPUR AND SPECIAL REPAIR TO ROOF AND CEILING PAO (ORS) CORPS OF SIGNAL OFFICE BUILDING JABALPUR UNDER AGE B/R-I OF GE (EAST) JABALPUR

Amount

Dismantling floor, hearth or wall tiling including CM bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F Non skid ceramic colour tiles (400x400)x 7 to 8mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F Non skid ceramic colour tiles (400x400)x 7 to 8mm thick as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

S&F Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F Glazed ceramic tiles (450x300)x 8-10 mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed in CM 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L Kota stone slab 20-25mm thick as in riser steps, skirting or dado and pillar laid over 10mm thick backing coat in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window-cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding laid over 20 mm thick screed bed in CM 1:4, quoted rates including moulding and rounding complete all as specified and directed.

M&L Machine cut cudappah stone slab 20-25mm thick laid over cement screed bed, 15mm thick in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in roof/floors other than ground level beam, stair case, landing, chajjas and similar items including water proofing treatment in any layers and removal of debris to distance exceeding 250m and not exceeding 500m from the site complete all as specified and directed.

M&L PCC 1:2:4 (Type B1 using 20 mm graded stone aggregate) levelling course average thick 40 mm, to match the undulations of roof complete all as specified and directed.

M&L rendering 10 mm thick on fair faces of concrete surface in CM 1:3 for receive the roof finishes with water proofing liquid complete all as specified and directed. Note : WPL shall be measured and paid separately.

M&L fillet of 75mm size using PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) at the junction of all horizontal and vertical surfaces complete all as specified and directed.

Taking down cement plaster on brick/concrete/stone surfaces including racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3.50 kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 160 gm/sqm) laid over primed surface including bituminous primer conforming to IS-3384-1965 applied @ 0.3 ltr/ Sqm by torched application complete all as specified and directed. Three course roof treatment consists of as under :- (a) Applying one coat of bituminous primer conforming to IS-3384-1965 @ 0.30 ltr/Sqm. (b) laying APP based membrane as specififed. (c) Applying a layer of blown grade bitumen 85/25 @ 1.2 Kg/Sqm conforming to IS : 702

M&L APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( wt not less than 150 gms /sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 ltr/Sqm by torched application complete all as specified and directed. Four course roof treatment consists of as under :- (a) Applying one coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr per sqm. (b) Laying of APP based membrane as specified thickness and weight. (c) Applying two coat of aluminium paint @ 100ml/sqm.

M&L cement concrete tiles 25 cm x 25 cm x 22 mm thick, machine pressed including provision of 15 mm thick screed bed in CM 1:4 with using water proofing compound complete all as specified and directed. Note : WPC shall be measured and paid separately.

Taking down chowkhat n exc 1.5 sqm each without taking off shutter from frame complete all as specified and directed.

Taking down chowkhat exc 1.5 sqm and n exc 4.00 sqm each without taking off shutter from frame complete all as specified and directed.

Aluminium powder coated ventilators partly fix and partly louvered of aluminium section designed DG-2762 (40 mm x 32 mm x1.5 mm thick) (wt 0.668 kg/mtr) frame and DG-2763 and middle section of designed DG-2763 (40 mm x 32 mm x 1.5 mm thick) (wt 0.654 kg/mtr), middle section DG-2546 (17.27 mm x 17.15 mm x 1.22 mm thick) (wt 0.124 kg/mtr) including 5 mm thick pinheaded figured glass louvers with blades of 100 mm heavy duty including with aluminium lever handle fixed panel shall be provided with 5 mm thick pin headed figured glass including all necessary rubber packing, anodized aluminium snap beading fixed with minimum 6 Nos of suitable size galvanised screws with PVC plug etc complete all as specified and directed.

S&F powder coated Aluminium sliding windows three track with two glass shutters using 4 mm thick glass tinted Modi guard and one shutter with stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperture 1.61mm, using Aluminium powder coated section, Aluminium cleat, PVC track, bearing, handle lock rubber beading, etc complete all as specified and directed. Note : Size of aluminum sections are as under :- (a) Three track top & vertical – Jindal main – 2010 Section No 20621. (b) Three track bottom - Jindal main – 2010 Section No 20620. (c) Shutter vertical section - Jindal main – 2010 Section No 20606. (d) Shutter top & bottom - Jindal main – 2010 Section No 20604 (e) Shutter vertical middle (interlock) - Jindal main – 2010 Section No 20605.

S&F 125X60 mm size of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

M&L plain cement concrete Type C1, 1:3:6 ( using 20 mm graded stone aggregate) for filling of hollow pressed steel frame complete all as specified and directed.

S&F 25 x 3mm FI hold fast conforming to Fe 290, Gde -E-165 complete all as specified and directed.

M&L plain cement concrete Type B-0 1:2:4 ( using 12.5 mm graded stone aggregate) for fixing hold fast including repairing of disturbed plaster ( while taking down Door/window,ventilator frame) and matching the repaired surface with existing one complete all as specified and directed.

S&F 35mm thick second class hardwood factory made flush door shutters, solid, core construction with black board core and plywood face panals commercial type on both sides complete all as specified and directed.

S&F 35 mm thick second class hardwood factory made glazed and skelton shutters open rebated and prepared to receive glass gauge etc. wihout sash bars sizes of the members of the shutters as specified in SSR Part-I section 8 , clause 8.24 (a) complete all as specified and directed.

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail bottom rail on either side & as gap insert for top rail & bottom rail panel ling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stile & rails with suitable PVC sheet beading & joined together with solvent cement specified and shown on drawing complete all as specified and directed.

S&F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F 18mm thick Solid PVC Sandwich Panel with 1mm plain colour PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing complete all as specified and directed. Note : MS work shall be measured and paid separately.

S&F 100mm butt hinges extruded aluminum alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed.

S&F 150 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed.

S&F 300 mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified and directed.

S&F 150 mm long aluminum anodized barred tower bolts of extruded section complete all as specified and directed.

S&F Aluminium door stopper of size 150 mm long double legged fixed to bottom rail of door shutter provided with rubber bushing at one end to stop the door at floor and other end provided with aluminium plate base fixed with door shutter with screws at appropriate height complete all as specified and directed.

S&F MS 300mm helical door springs including roller and roller plate complete all as specified and directed.

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L PCC 1:5:10, type E-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:3) finished even and smooth without using extra cement with using water proofing liquid complete all as specified and directed. Note : WPL shall be measured and paid separately

M&L applying acrylic cementicious polymer modified elastomeric waterproofing & protective coating like brush bond of Fosroc or Pidifin 2K (Pidilite) as per manufacturer instructions on rendered surfaces of floor and wall of sunken portion complete all as specified and directed.

Demolition of brick work/ stone masonry/ PCC block masonry built in CM or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.

M&L old size bricks with fly ash bricks straight or curved on plan exc. 6m mean radius and setting in CM 1:6 etc complete all as specified and directed.

M&L 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L 5 mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick surfaces in CM (1:4), first coat 10 mm thick plaster in CM 1:4 and second coat 5 mm thick in CM 1:4 with using water proofing liquid finished surfaces even and smooth without using extra cement complete all as specified and directed. Note : WPL shall be measured and paid seperately.

Supply only liquid water proofing compound complete all as specified and directed.

M&L framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm bore medium grade galvanished tube with all fittings & fixed complete to walls or ceiling & laid in floors complete all as specified and directed.

S&F 20 mm bore medium grade galvanished tube with all fittings & fixed complete to walls or ceiling & laid in floors complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10 cm girth in brick wall complete all as specified and directed.

S&F 1000 Ltrs capacity rotational moulded polythene water storage tank ISI marked (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old tanks complete all as specified and directed.

S&F 20mm bore ball brass valve, high pressure with polythene float & fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair 20mm bore Gun metal gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

Demolition and breaking up 100 mm dia drain pipes (Salt glazed ware, PVC, AC or Reinforced concrete) set in CM complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls or laid in trenches complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed.

S&F 110mm bore PVC (S.W.R) bend with access door complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece, single `Y’ equal or un equal with access door complete all as specified and directed.

S&F 75mm bore PVC (S.W.R) bend with access door complete all as specified and directed.

S&F 110mm bore PVC vent cowl complete all as specified and directed.

S&F PVC floor trap 75 mm dia with CP gratings complete all as specified and directed.

S&F PVC nahani trap 110 mm dia with CP gratings complete all as specified and directed.

S&F in repairs brass chromium plated bottle trap for wash basin/sink with inlet and outlet screwed for pipe or connections including necessary packing, union and cap bore of trap 32mm fixed complete all as specified and directed.

S&F in repairs vitreous china water closet squatting pan 'orissa pattern, ivory coloured of size 580 x 440 mm, with integral foot rest and outlet for 'P' or 'S' trap , WC pan shall be set in lean concrete below level of rim of pan to receive the floor finish complete all as specified and directed.

S&F PVC valveless syphonic action type flushing cistern 10 ltrs capacity low level, white with inlet ball valve, float and handle including brackets flush pipe of polythene of low or high density of PVC 32mm dia for low level cistern complete all as specified and directed.

S&F in repairs vitreous china white counter oval shape wash hand basin of size 630x450mm incl brackets complete all as specified and directed.

S&F in repairs sinks made of stainless steel 1 mm thick kitchen with plugs, washers and waste coupling including bedding in CM on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm X 420mm bowl size size 410mm X 330 mm X 160MM complete all as specified and directed.

S&F waste coupling brass CP for glazed ware sink, WHB etc with long screwed shanks and fly nuts complete of 32mm dia.etc complete all as specified and directed.

S&F in repairs tubular towel rail 20 mm dia 'D' type 600mm long of stainless steel complete all as specified and directed.

S&F in repairs 15mm bore fancy type chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes complete all as specified and directed.

S&F in repairs angle stop valves 15mm bore, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15mm bore PVC connection with PTMT nuts of length 450mm complete all as specified and directed.

S&F 15 mm dia brass CP wall mixer unit for mixing hot & cold water screwed down for iron pipe and fixed including all necessary fittings complete all as specified and directed.

S&F 15mm bore brass CP wash basin mixture for mixing hot and cold water complete all as specified fixed including all necessary fittings complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size complete all as specified and directed.

S&F Salt glazed stone ware gully trap 150mm square type 'P' includng MS gratings suitable to 150 x 150 mm gully trap and including PCC chamber 10 cm thick and RCC cover set in CM 1:6 complete all as specified and directed.

S&F in repairs 20 mm dia curtain rod brass chromium plated with fixing fancy bracket stops rollers etc complete all as specified and directed.

S&F in repair kitchen steel plate rack of size 1200x900mm stainless steel 0.63 mm thick of standard quality complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

M&L preparing new steel surfaces and applying two coats of syntheitc enameled paint over a red oxide primer exc 10 cm width or girth complete all as specified and directed.

M&L preparation of new or previously un-treated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L preparation of newly plastered surfaces of wall and applying two coats distmper oil emulsion over a coat of primer and avg 3 mm thick wall care putty complete all as specified and directed.

M&L prepraring newly plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L preparation of new plastered surfaces of celling and applying two coats of white lime wash complete all as specified and directed.

M&L complete removal of existing treatment on wall and applying two coats of distmper oil emulsion over a coat of primer and avg 3 mm thick wall care putty complete all as specified and directed.

M&L complete removal of existing treatment of wall surfaces of brick or concrete suraces, pillars, cornices and similar surfaces at any height including necessary scaffolding and applying two coats of white wash (lime) complete all as specified and directed.

M&L complete removal of existing treatment on wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Excavation in trenches, not exc 1.50 m depth & n. exc1.50m wide for foundation etc & getting out in any type of soil complete all as specified and directed.

M&L cement concrete (1:4:8) type D-2 (by using 40 mm graded stone aggregate) as in mass concrete complete all as specified and directed.

M&L cement concrete 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in mass concrete and foundation filling complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F mangalore pattern pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F MS steel flat iron as in wind tie for roof sheet including securing bolts complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out soft/loose soil complete all as specified and directed

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.

M&L broken stone or boulder hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 75 mm thcik PCC 1:4:8 type D2 using 40mm graded aggregate as in sub base complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L 60 mm thick glossy finish machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of M-35 grade complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor and pavings n.exc 15cm thickness (below or above GL) complete all as specified and directed.

S&F glossy finished Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L demolition and breaking up drain pipes 150 mm (salt glazed ware or reinforced concrete) incl PCC bedding & hauching set in CM complete all as specified and directed.

M&L 150mm dia reinforced cement concrete pipe CL NP-2 laid and jointed complete with collars complete all as specified and directed.

M&L PCC 1:3:6 type C2, 40mm graded stone aggregate as in concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150 mm bore complete all as specified and directed.

M&L TMT bars 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L precast RCC (1:2:4) type B1 (using 20mm graded stone aggregate), as in cover slabs of manholes, open drains inclusive of form work set in CM (1:4) complete all as specified and directed. Note : Reinforcement shall be measured and paid separately

Returning filling including spreading, levelling watering & well ramming in layers n.exc 25 cm thick in soft/disintegrated rock complete all as specified and directed.

M&L Brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radiusbuilt in CM 1:6 complete all as specified and directed.

M&L Brick work with sub class ‘B’ brick, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. .

M&L rendering on concrete/brick surfaces 15mm thick in CM 1:4 surface finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surfacces and applying three coats of white wash as in ceilling complete all as specified and directed.

M&L preparing Newly Plastered Surfaces of internal wall and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for Preparing Newly Plastered Surfaces of external Walls and applying Two Coats of Cement Base Paint over a coat of primer complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets including E- Grid frame work complete all as specified and directed.

S&F suspended false ceiling system using Chicago metallic (E-grid) exposed suspended system, grid size 600x600mm comprising of GI powder coated main runner of dimension 39mmx24mm x 0.8mm thick (Thickness comprising of GI/0.5mm+ PPPCGS/ 0.3mm & weight of runner 1.35 Kg for 3600mm length), cross Tee of dimension 29mm x 24mm x 0.7mm thick (Thickness comprising of GI/0.5mm+PPPCGS/0.3mm & weight of Tee 0.195Kg for 600mm length) and wall angle of dimension 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI/0.35mm + PPPCGS/0.30mm & weight of angle 0.700 Kg for 3050mm length) with and including 6mm thick HSPC (High Pressure Steam Cured) pre-primed, self embossed, textured designer board, water, termite & fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt 0.007 Kg/clip), hold down clips (wt - 0.0035 Kg/clip), with provn of light fixture complete all as per manufacturer instructions complete all as specified and directed.

Fixing only 6mm to thick in ceiling flat or sloping non asbestos cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work fixed with screw as per manufacturer's instructions complete all as specified and directed.

Taking down old steel tubing & connection including cleaning for refixing for 25mm or 32 mm bore pipe complete all as specified and directed.

S&F Tubes medium grade, 25mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

M&L re-fixing tubes medium grade, 15mm bore galvanised with all fittings and fixed complete to wall (Concealed) and ceiling or laid in floors complete all as specified and directed.

M&L re-fixing tubes medium grade, 25mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S& F in repairs Stop valve / Angle valve concealed type cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius 75 mm bore complete all as specified and directed.

S&F, 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.

S&F, 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.

M&L stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves 25mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L dismantling exc1000 and n.exc 2000 ltr cpacity water tanks and removing to store complete all as specified and directed.

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 25 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. Note : PVC tank shall be ISI marked and having three layers.

M&L roughening surfaces of old concrete floor/terrace by picking incl. taking down existing detoriated / decayed tar felt PCC tiles or any type of treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc and removing the scraped materials debris to a distance n.exc. 50 m complete all as specified and directed.

M&L wire brushing and cleaning top surface of tiles,lime terracing or cement concrete, including flashing and junction of parapet,etc,and surface painting with a layer of blown bitumen of any penetration applied hot @1.70 kg per sqm.blinded with grit or pea size gravel @ 0.006 cu.m per sqm and lightly tampered (area of flashing etc.shall be added to the roof area) complete all as specified and directed.

M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.

M&L cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster complete all as specified and directed.

M&L one coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces complete all as specified and directed.

M&L one layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm consisting 3mm thick reinforced with polyster non wovan fabric shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame complete all as specified and directed.

M&L applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm complete all as specified and directed.

M&L bitumastic gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as specified and directed.

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials for taking credit and making good disturbed surfaces of walls, floors and roofs etc complete all as specified and directed.

Taking down sub main wiring complete including fitting and fixtures, removing materials for taking credit and making good disturbed surfaces of walls, floors, roof etc, complete all as specified and directed.

Taking down carefully unserviceable DBs any type/size with MCCBs/MCBs//Isolator etc and disconnecting and making good disturbed surfaces complete all as specified and directed.

M&L complete point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc complete all as specified and directed for the following :-

One light point controlled by one switch.

One light point controlled by two way switch.

One fan/Exhaust fan point controlled by one switch and one regulator.

One bell/ buzzer point controlled by one, complete all as specified and directed.

One 3 pin switch socket outlet point 5 Amps on independent board.

One 3 pin switch socket outlet point 5 Amps on same board with other switch.

All as per item No 148 above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size complete all as specified and directed

S&F modular type switch, one way 6 Amps , 1 module complete all as specified and directed.

S&F modular type switch, Two way 6 Amps , 1 module complete all as specified and directed.

S&F modular type switch, one way 16 Amps, 1 module complete all as specified and directed.

S&F modular type socket 5 pin, 6 Amps 2 module complete all as specified and directed.

S&F modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and directed.

S&F ceiling rose surface backlite 65x50 mm 3 terminals complete all as specified and directed.

S&F fan regulator step down 120 Watt, 2 module complete all as specified and directed.

S&F lamp holder PVC type with back plate for lamp holder fitting complete all as specified and directed.

S&F LED lamp suitable for B22 holder of capacity 9 Watt complete all as specified and directed.

S&F Modular Bell push flush type SP 6 Amps complete all as specified and directed.

S&F call bell (Ding Dong) 240 V, 50 Hz with PVC rectangular block for mounting of call bell Size of Block 175 x 100 x 50 mm complete all as specified and directed.

S&F LED Batten lights fitting 1 x 18 W, 220 V, AC, box type with driver, holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed.

S&F Vertical Distribution Board MCCBs VTPN 4 way double door suitable for MCCB four pole as incomer and out going MCBs and should be IP 43 protected with Copper Bus Bars, Neutral Links, Earthing bar complete all as specified and directed. Note:- (a) MCCBs four pole shall be measured paid separately (b) MCCB, MCB & DB shall have the same make.

S&F sheet metal enclosure distribution board SPN 8 way 240 volts with IP 43 protection and double door, Bus bar rating 100 Amps, suitable for mounting MCBs complete all as specified and directed.

S&F MCCBs, 4 pole, 415 volts, 100 Amps, 16 KA complete all as specified and directed.

S&F MCB, single pole, 240 volts, 6 to 32 Amps, complete all as specified and directed.

S&F MCB, single pole, 240 volts, 40 Amps, complete all as specified and directed.

S&F MCB, single pole & neutral, 240 volts, 32 to 63 Amps, complete all as specified and directed.

M&L submain wiring alongwith earth wire with the sizes of FRLSH PVC insulated copper conductor single core cable , copper conductor multistranded 6 sqmm 2 core and One runs 6 sqmm earth wire and including suitable size of PVC concealed conduit and all accessories concealed in walls / roofs / ceiling etc. earth dolly, terminated in terminal box complete all as specified and directed. Note : Two runs of copper conducter and one runs of earth copper conductor and conduite shall be measured as one length

M&L submain wiring alongwith earth wire with the sizes of FRLSH PVC insulated copper conductor single core cable , copper condctor multistranded 2.5 sqmm 2 runs and One runs 2.5 sq mm earth wire and including suitable size of PVC concealed conduit and all accessories concealed in walls / roofs / ceiling etc. earth dolly, terminated in terminal box complete all as specified and directed. Note : Two runs of copper conducter and one runs of earth copper conductor and conduite shall be measured as one length

Taking down of Ceiling/ Exhaust Fan fan of any size/sweep, fixture to deposit store yard complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F exhaust fan, steel body AC single phase. 230 V of size 300 mm sweep with, blades, frame and louvers and including making of holes in wall, floor etc complete all as specified and directed.

M&L complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 7.5 m length fo drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and directed.

S&F storage type geyser of capacity 25 ltr 220 volt single phase AC supply, in metallic body five star rated energy efficient including grouting on bolts/studs in wall and making good complete all as specified and directed. .

S&F doble pole and neutral enclosure with a two pin and earth plug and socket complete MCB of 20 Amp complete all as specified and directed.

Supply, laying and Testing of underground LT cable 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium stranded conductor, Armoured cable 16 sq mm 4 core cable including taking down unserviceable cable complete all as specified and as directed.

Removal of excavated surplus material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specifieds and directed.

M&L for cutting of bituminous road / floor / culvert / PCC hard standing for laying of pipe / cables not exceeding 1.5 meter wide and not exceeding 1.5 meter deep including refilling / with material and , watering well ramming / compacting and making good with PCC 1;2;4,type B-1, 100 mm thick complete all as specified and directed.

Supply & laying dry river sand as cable cushioning 15cm thick layer before laying and 8cm thick over cable after laying the cable in trench complete all as specifieds and directed.

M&L unreinforced precasted concrete cable cover class LV, type 1,flat , size 250mm x 150mm x 40mm complete all as specifieds and directed.

M&L GI pipe ''light grade'' for road crossing / on wall / on pole with fixed clamps, nuts, bolts for cable protection of size 50 mm dia complete all as specifieds and directed.

Schedule of credit amount of Rs 64201.00 to be deducted during AOC.

RAM ASSOCIATES (BID ID -3363163)

a k builders (BID ID -3363603)

M/S DADISA CONSTRUCTION (BID ID -3363227)

C L BHATIA (BID ID -3363299)

RAVI TEJ BUILDERS (BID ID -3363356)

MAA SHARDA CONSTRUCTION (BID ID -3363491)

R R VISHWAKARMA CONSTRUCTION CO (BID ID -3363033)