Electrification of Left Out unelectrified Households (HHs) and Public Institutions in tribal village covered under DA JGUA) scheme in JVVNL Under RDSS on turnkey mode.

PCC Poles

PCC Pole 9 mtrs long (200 KG)

11 KV Cross Arm Set with top hamper & clamps

11 KV Composite Polymer PIN Insulator

11 KV T & C Type composite disc polymer Insulator ( 1 Polymer disc Insulator + 1 Hardware)

1.4 Mtr Long MS Channel Bracket with clamp ( Cut point channel)

MS Flat 50x6 mm

MS Channel 100x50x6 mm

MS Angle 65x65x6 mm

ACSR Rabbit Conductor

GI stay set (Galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300X300X4 mm,12 mm dia turn buckle) including stay clamps,

Strain/Guy insulator for stay set

7/10 SWG GI Stay Wire

Stay Clamps suitable for 9.0 M long (200 KG) PCC Pole

M S Nut bolt ( Assorted Size)

11 KV Danger plate

GI Wire 8 SWG (4 mm)

M S Rod type earthing Set

PG clamps for rabbit conductor

6.35KV/240 V 16 KVA aluminium wound, conventional outdoor type distribution transformers with all fittings and accessories and first filling of transformer oil alongwith MCCB. Protection on LV side confirming

6.35KV/240 V 25 KVA aluminium wound, conventional outdoor type distribution transformers with all fittings and accessories and first filling of transformer oil alongwith MCCB. Protection on LV side confirming

6.35/0.24KV S/S structure set for single phase transformer

9 KV. 10 KA distrubution class L.A.

11 KV 100 Amp. Drop out cum isolator with 5.0

Overhead ABC(Aerial bunched cable) 1x25+1x25 sqmm. with bare messenger

Suspension Assemblies (SA)NFC Type for Supporting a length of ABC at an Intermediate pole length

Anchoring AssemblyAA NFC Tpe for fitting onto a pole for anchoring thea dead end of a length

LT Insulation piercing connectors NFC Type A (main to tap main 16-50 mm2, Tap off 2.5-16mm2)

LT Insulation piercing connectors NFC Type B(main to main 16-50 mm2)

2CX4 Sq. mm. 1100 Volt heavy duty armoured PVC cable of Aluminium conductor

Description of Work / Item(s)

A. HT Line

erection of PCC Poles in allignment including excavation of pit size 1.2x0.6x1.5 cum. for 9 mtrs 200 Kg in ground and back filling soil consolidating each deposit layer of 0.15 mtr. by watering and ramming etc. in the length in normal soil/Hard Soil/Ordinary rock/Hard Soil which does require/not require blasting or through drilling

Fixing of 11KV Cross Arm with Top Hamper with clamps made of MS Angle 65x65x6mm, clamp 50X6 mm, earth clamp 50X6 mm (Galvanized)

Fixing of 11 KV 45KN composite polymer Pin Insulator complete in all respect

Fixing of 11KV T&C Type composite polymer Insulators complete including all accessories like hardware fitting (as per latest specifications and drawings adopted & approved by NIGAM)

Fixing 1.4 Mtr Channel Bracket with clamp

Erection Of MS Flat 50x6 mm

Erection of M.S Channel 100x50x6mm

Erection Of MS Angle 65x65x6 mm

Drawing of overhead steel cored aluminum ACSR Rabbit conductor in all respect

Fixing of GI stay set (Galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300X300X4 mm,12 mm dia turn buckle) including stay clamps, strain insulator, Stay wire7/10 SWG In normal soil/Hard Soil/Ordinary rock/PACCA road/Hard Rock/CC Road

Fixing of 11 kV Danger plate of size 200 X 250 mm complete in all respect

erection of 8 SWG (4mm dia) GI Wire for continuous earthing of 11 KV Line hot dip (Galvanised)

Erection of earthing rod sets for S/S made with MS Rod (Galvanized ) 20 mm dia, 3 meter length

Fixing of PG clamps (For Rabbit) made of aluminum alloy as per IS:617-1994 . All ferrous metal part intended for outdoor use except those made of stainless steel shall be protected by hot dip galvanizing in accordance with IS 2633-1986

B. Distribution Transformer

Installation of 6.35KV/240 V 16 KVA aluminium wound, conventional outdoor type distribution transformers with all fittings and accessories and first filling of transformer oil alongwith MCCB. Protection on LV side confirming

Installation of 6.35KV/240 V 25 KVA aluminium wound, conventional outdoor type distribution transformers with all fittings and accessories and first filling of transformer oil alongwith MCCB. Protection on LV side confirming

erection of PCC Poles in allignment including excavation of pit size 1.2x0.6x1.5 cum. for 9 mtrs 200 Kg in ground and back filling soil consolidating each deposit layer of 0.15 mtr. by watering and ramming etc. in the length in normal soil/Hard Soil/Ordinary rock/Hard Soil which does require/not require blasting or through drilling

Fixing 1.4 Mtr Channel Bracket with clamp

Fixing of 6.35/0.24 KV SubStation structure set for single phase Transformer on single 9Mtr, 200KG PCC pole complete in all respect made of MS channel, MS angle and MS flat etc. including nut, bolt, flat and spring washer (as per latest specifications and drawings adopted & approved by NIGAM)

Installation of Substation type 9KV, 10KA station class lightening arrestors.

Drawing of overhead steel cored aluminum ACSR Rabbit conductor in all respect

Overhead ABC(Aerial bunched cable) 1x25+1x25 sqmm. with bare messenger

Erection of earthing rod sets for S/S made with MS Rod (Galvanized ) 20 mm dia, 3 meter length

Fixing of 11 KV 100 Amp. Drop out cum isolator with 5.0 Amp. fuse & 12 KV post insulators including nut, bolt & washers as required as per technical specifications, approved drawings and scope of work.

Fixing of GI stay set (Galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300X300X4 mm,12 mm dia turn buckle) including stay clamps, strain insulator, Stay wire7/10 SWG In normal soil/Hard Soil/Ordinary rock/PACCA road/Hard Rock/CC Road

Fixing of 11 KV 45KN composite polymer Pin Insulator complete in all respect

Fixing of 11KV T&C Type composite polymer Insulators complete including all accessories like hardware fitting (as per latest specifications and drawings adopted & approved by NIGAM)

Fixing of 11 kV Danger plate of size 200 X 250 mm complete in all respect

Fixing of PG clamps (For Rabbit) made of aluminum alloy as per IS:617-1994 . All ferrous metal part intended for outdoor use except those made of stainless steel shall be protected by hot dip galvanizing in accordance with IS 2633-1986

C. LT Line

erection of PCC Poles in allignment including excavation of pit size 1.2x0.6x1.5 cum. for 9 mtrs 200 Kg in ground and back filling soil consolidating each deposit layer of 0.15 mtr. by watering and ramming etc. in the length in normal soil/Hard Soil/Ordinary rock/Hard Soil which does require/not require blasting or through drilling

Fixing of GI stay set (Galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300X300X4 mm,12 mm dia turn buckle) including stay clamps, strain insulator, Stay wire7/10 SWG In normal soil/Hard Soil/Ordinary rock/PACCA road/Hard

1CX25 + 25 sq.mm LT XLPE Aerial Bunched Cable(Bare Messenger)

Suspension Assemblies (SA)NFC Type for Supporting a length of ABC at an Intermediate pole length

Anchoring AssemblyAA NFC Tpe for fitting onto a pole for anchoring thea dead end of a length

LT Insulation piercing connectors NFC Type A (main to tap main 16-50 mm2, Tap off 2.5-16mm2)

LT Insulation piercing connectors NFC Type B(main to main 16-50 mm2)

D. Service Connection

Single Phase Static Energy Meter 5-30 A with Box (Push fit type)

2CX4 Sq. mm. 1100 Volt heavy duty armoured PVC cable of Aluminium conductor

Description of Work / Item(s)

Total price of Supply (BoQ1/Schedule-1) for electrification of households

Total price of Erection (BoQ2/Schedule-2) for electrification of households

M.M. Brothers (BID ID -3225968)

M.M. Brothers (BID ID -3225968)

M.M. Brothers (BID ID -3225968)