COMPREHENSIVE MAINT INCL E/M TO OTM AND MD ACCN OF JAT, DOGRA, GE ALWAR, STN HQ, UNDER AGE B/R-I AT ITARANA MIL STN, ALWAR

Amount

Disconnecting & dewatering of PVC overhead tanks, scrubbing the inner surfaces, cleaning & removing all scales, dirt etc.from mouth of circulating pipes, washing the tanks with fresh water and disinfecting the same by flushing with liquid chlorine or any other equivalent chemical, reconnecting & refixing in position after cleaning for tank capacity n exc. 500 ltrs each including marking the date of cleaning with white paint & stencil all as required & directed.

All as per item No 01.00 above but exc 500 ltr & n exc 1000 ltrs capacity.

Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, minor adjustment of joinery, door resecuring and door easing etc. including petty repairs material like screws/nails, plug etc. to make it functional. Note: Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid.

S&F in repairs stainless steel curtain rod of 25 mm dia including decorative bowel at both ends and pair of stainless steel brackets fixed at both ends with PVC rawl plug & steel screws all as specified & as directed.

Hacking out old broken glass of any thickness/size of any description from steel frame fixed with clips and putty and S&F with 4mm thick ordinary sheet glass fixed with clips and putty completed in squares not exc 0.50 Sqm each pane all as specified and as directed.

All as per srl item No 05.00 above but 4mm thick figured glass, pin head type.

Hacking out old broken glass of any thickness/size of any description from aluminium/ steel frame and M&L 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sq. m in each pane complete all as specified.

All as per srl item No 07.00 above but exc 0.5 sq. m in each pane complete all as specified.

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S&F in repairs 0.56mm thick aluminum sheet with nails to door shutters all as specified.

Taking down carefully anodized aluminium doors/windows/ventilators frame including glazed shutters & builder’s hardware complete of any size and any description and refixing in the same opening after carrying out necessary repair & replacement of unserviceable components / hardware to make it fully functional complete all as specified & as directed. Notes :- (i) Quoted rate shall deemed to include supply & fixing of new joining cleat, aluminium beading, glazing clips, rubber packing, stays including cutting of old styles etc & adjusting the same appropriately as directed.

S&F in repairs door closer hydraulically regulated, designation No. 3, aluminium (Die cast) body, universal type (ISI marked), fixed in repairs, complete all as specified & as directed.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs, with & including replacement of floor tiles if any broken during repair work and making good disturbed surfaces matching to the existing surfaces complete all as directed fixed in repairs.

Supply and fixing in repairs brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified.

Supply and fixing in repairs MS helical door spring 300mm size with roller base plate fixed to wooden or steel frames with welding etc complete all as specified.

Supply and fixing in repairs 100mm long aluminum anodised hasp and staple complete all as specified.

S&F in repairs 300mm long aluminium alloy anodised sliding door bolt with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium and fixed all as specified

Supply and fixing in repairs aluminum anodised handle 100mm long complete all as per IS.

Supply and fixing in repairs 200mm long aluminum, anodized barrel tower bolts of extruded section all as specified.

All as per item No 19.00 above but 150mm long.

Supply and fixing butt hinges 100mm long medium weight cold rolled MS fixed in repairs to pressed steel/angle iron frames by welding all as specified.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed overall length 140 mm complete all as specified & directed.

Running welding in repairs not exceeding 6mm thick all as specified and directed

Welding in repairs not exceeding 6mm thick and not exceeding 2.5 cm in length all as specified and directed

Cutting holes in stone/brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 n exc 1 brick wall

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins & other water supply fittings/fixtures and any obstruction to water supply in rooms, requiring plumber work, clear air lock and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(soot), M-Seal, screws, nails to make water supply/plumbing lines functional and leak proof. Note: - Any item required to be replaced shall be paid under respective item and in that case this above item shall not be measured and paid.

M&L for water supply fittings/fixtures i.e. GI nipple, tank nipple, socket, union, elbow, tee, reduser of any size as per complaint for water leakage from taps, flushing cistern and other articles complete all as specified and directed

M&L for repair to leakage in floors of WC/Bath room/Kitchen by breaking of existing floor and providing new PVC (SWR) floor trap, suitable for type B pipes 75mm dia of outlet, plain with grating incl jointing with solvent cement and making good floor to match with existing floor all as directed

M&L for Cement patch work on wall/floor etc area n exc 1 sqm and depth n exc 15cm each complete all as specified and directed

M&L for filling of joints of tiles for WC/WHB corner/floor with white cement area n exc 1 sqm each complete all as specified and directed

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store.

Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store

S&F steel tubing medium grade 15mm bore with all fittings fixed complete to trenches and or laid in floor all as specified.

S&F steel tubing medium grade 20mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

S&F Rotational moulded polyethylene water storage tanks( white colour) (cylindrical vertical with closed top) of capacity 500 Ltrs hoisted and fixed in position inc all necessary fittings(nipple,socket,union etc)complete all as specified in SSR Part I including dismantaling existing water tanks and removing to store, complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks( white colour) (cylindrical vertical with closed top) of capacity 1000 Ltrs hoisted and fixed in position inc all necessary fittings(nipple,socket,union etc)complete all as specified in SSR Part I including dismantaling existing water tanks and removing to store, complete all as specified and directed.

S&F in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed of 20mm dia, minimum weight - 210 gms of including taking down existing ball valves any type all as directed

S&F in repairs brass Gun-metal, globe or gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, CP jet nozzle, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified & as directed.

S&F in repair Vitreous China Squatting pan, Orissa pattern, size 580 x440mm white with integral foot rests connection to trap and to flushing pipe, etc. complete including making good to floor complete all as specified & directed

S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified & as directed.

S & F in repair vitreous china wash basin with pedestal , white, flat back, size 550 x 400 mm including one no 15mm bore fancy type mixer taps with hot & cold, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe, one No PVC waste pipe 25 mm dia and 75 cm long with 32 mm dia connector, 32mm size waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed and PVC connection 15 mm dia & 600mm long with two Nos check nut and washer complete including cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) alongwith preader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified & directed

S&F in repairs vitreous china wash basin white of size 550x400mm (ISI marked) flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete fixed in repairs all as specified and directed.

S&F in repairs Jet spray chromium plated brass for EWC with & including PVC connection 600 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete.

S&F in repairs PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC complete all as specified.

S&F in repairs PVC connection of 15mm bore with 2 Nos. PTMT nuts, 45cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe.

S&F in repairs pipe of polyethylene of low or high density of PVC 32mm dia for low level cistern including all joints all as specified.

S&F in repairs PVC internal fittings (kit) complete for low level flushing cistern tank, all as specified and directed

S&F in repair towel rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed

S&F in repair plastic water closet seat cover white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete.

Supply and replacement in repairs of spindles, phases of brass of any size required for bib taps, pillar cocks, stop cocks, angle valves, concealed valves complete all as directed.

Supply and fixing in repairs MS grating CP 100mm dia, with hole for waste pipe of approved make including fixing with CM to floor/nahani traps etc complete all as directed.

S&F in repairs Pillar tap fancy type , cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore all as specified

S&F in repairs fancy type centre Hole Basin Mixer without popup waste system but including plain waste 32mm size with aerator complete cast copper alloy, chromium plated, screwed down high pressure, with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore.

S&F in repairs brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore all as specified and as directed.

S&F in repairs brass chromium plated shower rose 65mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified.

S&F in repair Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws.

S&F in repairs.sink with draining board made out of stainless steel 1mm thick sheet for kitchen with plug, washers, waste pipe, cast iron centilever bracket, connecting union over all minimum size 915mmx460mm with bowl size 410mmx330mmx160mm complete all as specified and directed

S&F in repair kitchen sink without draining board made out of stainless steel 1mm thick with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including and fixing cast iron cantilever brackets and connecting union to pipe over all size 495x420 mm bowl size 410x330x160 mm including flush pipe of polyethylene of low or high density or PVC 32mm bore with long screwed shanks and fly nuts complete all as specified & directed

S&F in repair Stainless steel plate rack, 1.00mm thick for kitchen size 600x900x230mm complete all as specified & directed by Engr-in-Charge.

S&F in repairs 32mm dia waste fittings, brass CP for glazed ware sinks, basin etc with long screwed shanks and fly nuts, flange and based in red lead cement and other and fixed all as specified.

All as per srl item No 62 above but 40mm dia.

S&F in repairs Mirror cabinet PVC frame of size 400 x 500 mm fixed to wall with rawl plug & stainless steel suitable size screws complete all as specified and direceted.

S&F in repair Looking mirror 5mm thick including cutting, grinding, polishing and chamffering of edges of glass, fixed with and including 20mm dia fancy type stainless steel fixers- 04 Nos complete fixed to wall all as directed

S&F in repair bib tap cast copper alloy with crutch or butter fly handle 15mm bore fancy type chromium plated complete all as specified

S&F in repair bib tap cast copper alloy with crutch or butter fly handle 15mm bore chromium plated complete all as specified

S&F in repair bib tap standard of PTMT any colour 15mm bore high pressurescrewed for iron pipe (Min. wt 90 gms) complete.

S&F in repairs 15mm bore Stop valve, fancy type with long shank and cup (concealed type) of cast copper alloy chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union.

S&F in repairs 15mm bore Stop valve/angle valves,fancy type chromium plated cast copper alloy screwed down high presure, screwed both ends for iron pipe or for unions.

S&F as in repair 15mm bore 2 way angle valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F in repair chromium plated health faucet for EWC with including PVC Connection 1m long suitable for 15mm bore with all connected fittings.

S&F in repair PVC water storage tank lid for cap 500 ltrs tighten with suitable size of nut bolts with spilt pin.

S&F in repair stainless steel cloth hanger size of 300mm long with minimum 8 to 10 hooks each complete all as specified & directed.

S&F in repair PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified & directed

S&F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed

S&F in repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified & directed

S&F in repair PVC (SWR) bends any radius 110 mm bore complete all as specified & directed

S&F in repair PVC (SWR) vent cowl 110mm complete all as specified & directed

S&F in repair 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified & directed

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed

S&F in repair PVC (SWR),110mm junction single, (Single T) equal or unequal complete all as specified & directed

Taking down plaster in cement mortar over walls/ceiling including racking out joints & hacking for keys.

M&L rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L for rendering 15mm thick in CM 1:4 on brick/stone wall surfaces or fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound (WPC will be measured and paid seperately) all as specified.

M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.

M&L for preparation of new Plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening of approved make all as specified and directed

Preparing newly plastered surfaces of walls & applying two coats of cement base paint complete all as specified and directed.

M&L for preparing newly pastered surfaces & applying three coats of white wash on ceiling all as specified.

M & L for complete removal of existing treatment on walls and preparation of surfaces of walls and applying two coats of oil bound distemper (OBD) complete all as directed.

M & L for complete removal of existing treatment on walls and preparation of surfaces of walls and applying two coats of oil bound distemper (OBD) over a coat of 1 mm thick birla care putty complete all as directed.

M&L preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint of approved shade/tint complete all as specified & as directed.

M&L for brooming down old decorated surfaces of wall, plastered or unplastered including cornices, pilasters etc and applying two coats of white wash, complete, all as specified and directed.

M&L preparation of old decorated plastered/unplastered surfaces of ceilings & applying one coats of white wash complete all as specified.

M&L for brooming down old decorated surfaces of wall, plastered or unplastered including cornices, pilasters etc and applying one coat of colour wash, complete, all as specified and directed.

M&L preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

M&L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

M&L preparation of old decorated plastered/unplastered surfaces of wall and applying two coat Plastic emulsion paint on walls complete all as specified & directed.

M&L preparation of old decorated plastered/unplastered surfaces of wall and applying two coat of exterior emulsion apex paint (exterior grade) on walls complete all as specified & directed.

S&F in repair teak wood lipping 6mm thick fixed with nails to 18/19mm thick block board or veneered particle board complete all as specified

S&F in repair 6mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work etc including taking down existing frame work complete all as specified & directed

S&F in repair 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc. including taking down existing frame work complete.

S&F 75mm extruded brass handles, fabricated type polished complete all as specified & directed

S & F Width of flaps (when open) 40mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified & directed

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete, all as directed

M&L for 25 thick cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in levelling coarse for tiles.

M&L Non skid Ceramic tiles 7 to 8 mm thick in light shade(square/rectangular) polished, area of each tiles exceeding0.18 sqm but not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick cement screed in cm 1:6 complete all as specified and directed.

All as per srl item No 108 but on skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10 mm thick cement screed in cm 1:4 complete all as specified and directed.

M&L Non Skid Coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cm 1:6 complete all as specified.

M&L machine cut kota stone slab flooring 20-25 mm thick over 20 mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified& directed

M&L for 40 mm thick PCC 1:2:4 type B -1 using 20 mm graded aggregate as in flooring complete all as specified & directed

S&F plastic dividing strips, 1.5 mm thick and 28 mm width inserting in position conform to position complete all as specified

M&L 75 mm thick PCC(1:3:6) type C1 (using 20mm graded stone aggregate ) as in plinth protection finished fair and even complete all as specified& directed

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off premises all as specified.

M&L Glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified & directed

M&L Glazed ceramic tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for 20mm thick Granite slab of approved shade, as in platform etc, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) including required cutting to suit the size of oval type wash hand basin over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

M&L Precast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) set in cement mortar 1:6 as in coping of brick masonry wall kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin) corbels, brackets, etc. including weathering slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified& directed

M&L for Providing precast cement concrete louvres and jallies, 25mm thick (measured solid), including all mould- ings but excluding frame set in cement mortar Set in cement mortar 1:4 (type B-0 1:2:4) 12.5mm agregate complete all as specified& directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F MS steel work in tubular trusses and tubular posts, purline, rafter including special shaped washers etc., complete using but welded. RHS/SHS confirming to IS 4923 : 1997 complete all as specified & directed

M&L for Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 W (Gde E-250) Quality B ,complete all as specified & directed

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified & directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified & directed

M&L for PCC Type C2 1:3:6 (40 mm graded stone aggregate) Cement concrete in foundations, filling and mass-concrete complete all as specified & directed

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified& directed

M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.

S&F in repair mild steel solid rubber beading of 20 to 40mm wide and 2 to 4mm thick fixing at bottom to existing doors complete all as specified and directed

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets/AC boards, any thickness, including cover fillets and removing from site all as specified.

M&L False ceiling with ArmGyp-FB ceiling tiles of 595mm x595 mm(as approved by GE) fixed with and including galvanised iron powder coated inverted "T" or "L" section (concealed GI frame work) of mettalic or equivalent suspended from ceiling with provn of galvanised wire 4 mm dia and wall taping screw including butterfly clip, hold down clips for fixing the board to frame complete all as per manufacurers instructions all as directed and specified. (a) size of main tee 39 x 24.4 x 0.8 mm (b) size of wall angle 22.2 x 22.2 x 0.65 mm (c) size of grid 0.61 x 0.61 mm complete all as directed and specified.

M&L for false ceiling with Armgyp-FB ceiling tiles of size 595 x 595mm, 9mm thick fixed with existing frame work fixing the board to frame complete all as per manufacurers instructions complete all as directed and specified.

S&F Solid PVC Wall Lining consisting of 5mm thick decorative colour laminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

Taking down Chowkats or frames with shutters ( without taking off shutters from the frame) n exc 1.5 sq.each & removing to store.

Taking down Chowkats or frames with shutters ( without taking off shutters from the frame exc 1.5 sq. m but n exc 4 sq m each & removing to store.

Taking down Shutters of any description exc 1 sq. m but n exc 2 sqm each & removing to store.

S&F 35mm thick IInd class hard wood factory made panelled door shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete .

S&F 35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified& directed

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

M&L Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete.

S&F Butt hinges 100mm long medium weight, colled rolled mild steel complete all as specified& directed

S&F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed

S&F 150mm Aluminium handles, cast type, anodised complete all as specified & directed

M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified& directed.

S & F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized wire staples complete.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floor in PCC 1:2:4 type B-0 to match the existing floor.Fe-410 (Gde-E250 quality A).

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

S&F anodized aluminium frame and other sections for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc.

S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete .

S&F anodized aluminium door shutters, aluminium section weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc.

S&F for powder coated of any colour as approved anodised aluminium grill of approved pattern for windows/ ventilators/doors complete.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete .

S&F sheet glass ordinary quality,in squares n. exc. 0.5 SQM each 4.80 mm thick complete .

S&F 3mm thick ordinary sheet glass fixed with clips and putty completed in squares not exc 0.50 Sqm each pane all as specified and as directed.

S&F M.S. frame work such as grills, gratings, angle frame etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, cooler stands and similar work conforming to Fe.290.Gde-E-165 a oat of red oxide primer after preparation of steel surfaces

M&L for fixing in repair vitreous china wash basin any size incl cutting pinning for and pinning in ends of brackets or erecting stand and refixing in the same wash basin complete all as specified and directed

Demolition Mud in roofs, any thicknes, including plastering , existing tretement and cleaning (whether full thickness removed or only or part there of) etc in all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to a minimum consolidated thickness of 25 mm as leveling course, laid and compacted in min slope 1:30 over roof complete.

M&L screed laid 15mm thick in CM 1:4 with water proofing compound over green concrete surface (WPC will be measured and paid seperately) surface finished even and smooth (without using extra lime or cement) complete .

M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces over bituminious primer complete .

M&L APP based plymeric membrane minimum weighing 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.

Supply only Integral waterproofing compound.

S&F in repairs 300mm long stainless steel sliding door bolt with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts.

Supply and fixing in repairs stainless steel handle 100mm long complete .

Supply and fixing in repairs 200mm long stainless steel barrel tower bolts.

Supply and fixing stainless steel butt hinges 100mm long medium weight.

Taking down carefully copper/aluminium point wiring of any size (light, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulatos, sockets etc to be measured separately), and making good disturbed surfaces of walls, floors etc to match with existing surfaces.

Taking down MCB with sheet metal enclosure, main switch, DB etc and making good disturbed surfaces to match with existing surfaces.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces.

Taking down carefully by unscrewing from boards /outlet boxes fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittigs, bulk head fittings tube lights etc complete all as specified and directed by Eng-in-charge.

M&L for concealed Point wiring for One Light point controlled by one, one way switch in repair with two single core PVC insulate, unsheathed multistranded copper conductor cable of size 1.5 sq.mm (FRLS) drawn in and including electrical grade PVC conduit 20 mm dia concealed on wall/ceiling/floor including PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FRLS) including MS shunk sheet metal box with 3 mm thick bakelite plastic laminated sheet top cover with brass counter shunk screws tith washer complete all as specified. Note - quoted rate shall include making good to the disturbed surfaces including plastering and painting to match with the existing colour.

All as per item No 174.00 but for One 3 pin switch socket outlet, 5 Amp on the same board with other switches.

All as per item No 174.00 but for One 3 pin 5 amps switch socket outlet point on independent board.

All as per item No 174.00 but for One bell/buzzer point controlled by one bell push.

All as per item No 174.00 but for Two way point controlled by two way switch.

M&L for concealed Point wiring for One ceiling/exhaust fan point controlled by one switch and regulator in repair with single core PVC insulated, unsheathed multistranded copper conductor cable of size 1.5 sq.mm (FRLS) drawn in existing conduit including PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FRLS) including MS shunk sheet metal box with 3 mm thick bakelite plastic laminated sheet top cover with brass counter shunk screws with washerc complete all as specified. Note - quoted rate shall include making good to the disturbed surfaces including plastering and painting to match with the existing colour.

All as per item Sl. No. 179.00 here in before but wiring with 4.0 sq.mm multistranded cable and earth wire with copper conductor of size 4.0 sq.mm for 15 amps power/geyser point.

S&F in repair Piano type switch single pole 1 way 5/6 amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

S&F in repair Piano type switch single pole 2 way 15/16 amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

S&F in repair Piano type switch single pole 1 way 15/16 amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

S&F in repair Ding Dong Bell along with bell push flush type 5 amps complete all as specified and directed by Engr-in-Charge.

S&F in repair socket two in one 6/5 Pin 5 Amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

S&F in repair socket two in one 6/5 Pin 15/16 Amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair for Modular switch, one way 6 Amp, 1 module, piano type, 230/250 volts grade on top covers (catered in point wiring above).

All as per item No 187.00 here in before but Modular switch, two way 6 Amp, 1 module

All as per item No 187.00 here in before but Modular switch, one way 16 Amp, 1 module

All as per item No 187.00 here in before but Modular bell push 6 Amp, 1 module

Supply and fix Modular socket outlet 2 in1, 3 pin 5A, 2 module in repair socket out let multipurpose use, flush mounting type, 230/250 Volts grade on Top covers (catered in point wiring above).

All as per item No 191.00 here in before but Modular socket outlet 2 in1, 3 pin 15 Amps flush type

S&F in repair PVC white cover plate with frame 2 Module etc complete all as specified & directed.

S&F in repair PVC white cover plate with frame 3 Module etc complete all as specified & directed.

S&F in repair PVC white cover plate with frame 4 Module etc complete all as specified & directed.

S&F in repair PVC white cover plate with frame 6 Module. etc complete all as specified & directed.

S&F in repair PVC white cover plate with frame 8 Module etc complete all as specified & directed.

S&F in repair modular metal flush box 2 Module etc complete all as specified & directed.

S&F in repair modular metal flush box 3 Module etc complete all as specified & directed.

S&F in repair modular metal flush box 4 Module etc complete all as specified & directed.

S&F in repair modular metal flush box 6 Module. etc complete all as specified & directed.

S&F in repair modular metal flush box 8 Module etc complete all as specified & directed.

Supply and fixing in repair decorative ultra slim,elegant and sleek designed LED T5 batten lighting fixture with extruded aluminium housing with frosted diffuser environment friendly energy efficient sutiable for 20 watt LED tube light with 125 lumen per watt complete all as specified and directed .

Supply and fix in repair Lamp holder, PVC/Polycarbonate type complete with lamp LED 9 Watt for Batten fitting with back plate and all fittings complete all as specified and directed by Engr-In-Charge

Supply & fixing in repair indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1X9 watt LED Tube fitting (size within 600x25x40 mm) suitable for mirror light with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K,>100Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge. Make- Havells,Philips,Bajaj

Supply and fix in repair ceiling rose surface bakelite two to three terminals/plate, polycarbonate, isolated body.

Supply and fix in repair sheet metal enclosure DB single pole and neutral for 240 volts 8 way with 200 Amps rated busbar flush/surface mounting double door.

Supply and fix in repair Switch socket combination 2 in 1, 5 A, 3 Pin flush type inc taking down old onecomplete all as specified and as directed.

Supply and fix in repair Switch socket combination 5A/16A, 5 in 1 inc taking down old one complete all as specified and as directed.

Supply and fix in repair Switch socket combination 2 in 1, 5 A, 3 Pin with Modular box, flush type inc taking down old onecomplete all as specified and as directed.

Supply and fix in repair Switch socket combination 5A/16A, 5 in 1 with Modular box type inc taking down old one complete all as specified and as directed.

Supply and fixing in repair 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB of size SP 6-32 Amp complete with connection testing and commissioning complete all as specified and directed by Engr-In-Charge

All as per item ser No 210.00 here in before but SPN 40-63 Amp

Supply and fix in repair Vertical DB 4 way suitable for Double Pole outgoing MCB-40 Amp-04 Nos with incoming 100 Amps MCCB 4 pole-01 Nos complete with 250 Amps rated Copper busbar flush mounting, double door, proction class IP-30, IK08 complete all as specified.

Supply and fix in repair MCCB 100 Amps, 4 pole, 16 KA thermal and magnetic release in V TPN DB complete all as specified.

Supply and fixing in repair PVC Blanking Plates one way with internal lock complete.

S & F in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed by Engr in charge.

S & F in repair modular fan regulator, 120W-2 Module complete all as specified and directed by Engr in charge.

Material & Labour for Sub Main Wiring in repair with two run single core 4 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable size with and including 2.5 Sqmm copper green colour earth wire all as specified and directed by Engr-in-Charge. NOTE-two run of 4 sq.mm & One run of 2.5 sq.mm & One run of PVC conduit with accessories shall be measured as One length.

Material & Labour for Sub Main Wiring in repair with two run single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable size with and including 6 Sqmm copper green colour earth wire all as specified and directed by Engr-in-Charge. NOTE-two run of 6 sq.mm & One run of 6 sq.mm & One run of PVC conduit with accessories shall be measured as One length.

M & L for Earthing in repair complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick burried directly in ground earth pit not less than 2.25 Mtr deep below normal ground level with top edge of earth plate not less than 1.5 Mtr below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, checknuts and washers of galvanised iron all as shown in electrical plate No 5 of SSR Part-I, connected to transformer / feeder pillar all as specified including GI pipe 20 mm bore medium grade for watering and 15 mm GI Pipe light grade for protection of earth lead wire, PCC chamber using PCC 1:3:6 type C-2 CI frame and cover, funnel and wiremesh, all excavation and earth work etc complete all as specified and directed by Engr-in-Charge

Supply and fixing in repair LED light fitting as building security lights of 35 Watt Cap 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with epoxy powder coated CRCA sheet steel grey tray, clear acrylic cover, incl street light bracket made out of 25 mm dia GI medium grade pipe 0.6 mtr long complete with 2 sets of FI clamps made out of 30x5 MS flat & nuts, bolts & washer including painting to clamp with two coats of aluminium silver paint over a coat of primer, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-In-Charge

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric poer cable (heavy duty) 1100 conductor of size 25 Sq mm 4.0 core.

Excavation in trenches not exc 1.5 m wide and n. exc 1.5 m deep in soft/loose soil for foundation/ cable etc n exc 10 Sqm on plan and n exc 1.5 Sqm in depth all as specified and directed by Engr-in-Charge

Returning, filling in including spreading levelling, watering and well ramming in layer n. exc 25 cm thick complete all as specified and directed

Removing surplus soil to a distance n. exc 50 m and depositing where directed at level n. exc 1.5 m above the starting point complete all as specified and directed

Supply and spreading, levelling river sand in trenches for cables cushioning on top and bottom of cable all as specifede and directed.

M&L brick protection with sub class 'B' brick laid flat across the cable complete all as specified and directed

M&L for boring under roads for crossing of UG Cables complete all as specifie and directed by Engr-In-Charge.

Supply and fix GI Pipe light grade of size 40 mm laid in trenches under road/fixed on wall/pole for cable protection complete all as specified and directed by Engr-In-Charge

M/s ASK Enterprises (BID ID -3340793)

shiva construction (BID ID -3333832)