Special Repair of perimeter Power House P248 Pump House and Perimeter sub station of 23 FAD at SNS under AGE I Suranussi

Amount

Demolition of brick work built in cement mortar including all quoins arches pillars, etc.complete all as specified.

Demolition of cement conc in ground floor and pavings not exceeding 15 cm thick above or below ground level. complete all as specified.

Demolition of reinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) (reinforcement cut as required to facilitate demolition) complete all as specified.

Taking down cement or cement lime plaster incl raking out joints hacking for keys scrubbing down with water etc complete all as specified.

Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area n.exc 1.50 Sqm each and removing from site. complete all as specified.

All as per Item No 5 above but area exc 1.50 Sqm but n.exc 4.00 Sqm complete all as specified.

Taking shutter only of any desription of size exc 1 sqm and n.exc 2sqm complete all as specified.

Ditto all as per item No 7 above but refixing in the same opening complete all as specified.

M&L brick work , with sub class 'B' bricks built in cement mortar 1:6 straight or curved on plan exc 6 mtr mean radius complete all as specified.

Ditto all as per item No 9 above but except bricks complete all as specified.

M&L 15mm thick cement plastering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified.

M&L for 15 mm thick cement plastering in cement mortar (1:4) on fair faces of brick work or concrete surfaces using water proofing compound as per manufactures instructions finished even & smooth without using extra cement complete all as specified.

M&l for 5 mm thick rendering in cement mortar 1:3 on ceiling complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc.complete, drilled for fixing of steel sheeting or other covering to Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165) complete all as specified.

M&L for 35 mm thick IInd class HW , factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.

M&L for 35mm thick IInd class HW glazed /gauged shutters open rebatd and prepared to receive glass /gauge etc without sash bars edges of framing plain or chamfered r rounded fitted with cut and mitred beads for securing glass/gauge etc all as specified in SSR Part I section 8 clause 8.24 (a) complete all as specified.

S&F solid PVC door frame of sie 50mmX 47mm made out of 5mm th plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified.

S&F 30mm th factory made PVC door shutter solid panel consisting of frame made out of MS tubes for top & bottom rails .Ms frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail , lock rail &bottom rail on either side & as gap insert for top rail & bottom rail . Panelling of plain of plain colur PVC sheet to be fitted in the MS frame welded/sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,etc all as specified and shown on drawings complete all as specified.

Supply & Fixing for steel windows 1.25 mm thick box type (primer coated) ERW hollow 'P' section of size 60mm x 25mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1mm thick and openable leaf consisting two nos sash bar of T section 20x3mm complete welded to frame including cutting holes and making good dismanteled portion in cement concrete (1:2:4) type B-I four nos for each window including following fitting welded to shutter complete all as specified and as directed by Engineer-in-Charge :- (i) Hold fast 150mm long 12 mm x 3mm made to shape - 04 Nos each window. (ii) Handle of Z Section 20 x 25 mm, 100mm long 01 Nos each leaf. (iii) MS tower bolt 150 mm long-02 Nos each leaf. (iv) Z Section 20 x 25mm, 100 mm stopper - 01 Nos per leaf (v) Cleat 55 mm long of hollow square 15x20x63mm welded to hinges - 01 Nos per leaf. (vi) MS Box type hinges of size 75 X 12 mm - 02 Nos per leaf. (vii) MS Guard bars square 12mm dia @10 cm c/c with GI frame fixed to window frame. (viii) Fabrication and fixing Note : Glass shall be measured and paid for separately.

Ditto all as above ser item No 20 here in before but skeleton shutter to recieving wire mesh as directed by Engineer-in-Charge

S&F Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified.

S&F 300mm size mild steel sliding door bolt plate type stove enamelled black with bright bolt not less than 12mm dia incl a minimum of six nut and bolts ,four on bolt plate and two on stapple plate complete all as specified.

S&F mild steel barrel tower bolt 200mm size stove enamelled black with bright bolt etc all as specified.

S&F 150 mm size mild steel pressed handle oval type stove enamelled black complete all as specified.

S&F 100 mm size mild steel butt hinges medium weight complete all as specified.

S&F floor door stopper aluminiumalloy body and tongue 140mm anodised with hard drawn steel spring etc complete all as specified.

S&F 300mm size mild steel rat rail rod pattern spring including roller and roller plate complete all as specified.

S&F in repair pre laminated decorative block board 25mm thick prelminated on one face etc fixed to timber frame work complete all as specified.

S&F galvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm complete all as specified.

Ditto all as per item No 30 above but fixed in repair complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified.

S & F 3 mm thick glass sheet ordinary quality glazing with oil putty in square n.exc 0 .5sqm in each pane complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed or bedding layer in CM 1:6 all as specified and directed by Engineer - in - Charge

M&L for glazed ceramic tiles coloured of size 450 mm x 350 mm x 7mm th on vertical surfaces such as in skirting, dado etc over & including 10 mm thick backing coat in cm 1:4 complete all as specified.

M&L 18-20 mm thick machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, over & including 20 mm th screed or bedding layer in CM 1:6 all as specified and directed by Engineer - in - Charge

All as per item No 37 above but as in skirting over & including 10mm th rendering in CM 1:4 complete all as specified

Use and waste for form work to soffits of suspended slab such as roof slab n exc 200mm thick (horizontal/sloping/vertical) with fair finished surface complete all as specified

M & L TMT bars 6mm to 8mm dia. cut to length bent to shape required including cranking, bending and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified

Demolition of cement concrete is reinforced of any description and in any position not otherwise specifically provided for complete all as specified.

M&L Reinforced cement concrete (nominal mix) TypeB0 1:2:4 (12.5mm graded aggregate) in slabs supported on walls, beams, columns deck slabs and in shelves, the like all as specified and directed by Engineer - in - Charge .

M & L Reinforced cement concrete (nominal mix) TypeB0 1:2:4 (12.5mm graded aggregate) in Chajjas all as specified and directed by Engineer - in - Charge

S&F in repair vitreous china squatting pan ‘Orissa pattern’ size 580x440mm white with intergral foot rest (excluding flushing cistern and flush pipe) with "P' or "S" trap including water connection to trap and flushing pipe, flushing cistern etc incl lime concrete bedding and PCC 1:2:4 for making good the floor fixed in repair complete all as specified.

S & F in repair PVC 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve, float and handle including brackets, flush pipe of PVC 32mm bore, connection to WC pan & PVC connection 15mm size with PTMT nuts of length 300mm complete all as specified. .

S& F vitrious china wash hand basin flat back 550X400mm incl fixing bracket, pvc waste coupling and waste pipe, etc all as specified and directed by engineer-in-charge.

S&F in replacement 20 mm dia harrison rails mild steel with decorative finish , with fixing brackets , stops, rollers complete all as specified and as directed (two brackets per 1.5 M length and 08 Nos roller per 1.RM)

Dismantling brick tile or terracing tile single layer on roof complete all as specified.

Demolition of mud in roofs ,any thickness incl plastering and leeping (weather full thickness removed or part there of) complete all as specified.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified.

Supply only Integral waterproofing compound conforming to IS-2645 complete all as specified.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by torch application complete all as specified

M&L for 40 mm average consolidated thickness PCC 1:2:4 type B1 using 20mm graded stone aggregate as in padding on flat roofs etc all as specified and directed.

M/L Cement concrete tiles 20cm x 20cm x 20mm thick,with grey cement and pigment machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished including 15 mm thick screed or bedding layer in CM 1:4 all as specified and directed by Engineer - in - Charge

M/L Providing, cement concrete type B-0 1:2:4 (12.5 mm graded aggregate ), as in roof kerbs or mud stops, rounded or chamfered on edges parapets copings, bed plates, etc

M&L for cutting grooves of size 75mm wide and 65mm deep in brick parapet wall for inserting APP membrane and making good the disturbed portion in CM (1:3) etc all as specified.

Dismantling water tanks of any description exc 250 but n.exc 500 ltr capacity complete all as specified.

S&F Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including pvc float valve 20mm size as per SSR Pt-1 complete all as specified.

Taking up/ down GI tubing and connections with all fittings 15 mm bore complete all as specified.

Ditto all as per item No 61 above but 20mm bore complete all as specified.

S&F 15 mmdia GI tubing and connections fixed to wall or ceiling, laid in floor etc complete all as specified.

S&F 20 mmdia GI tubing and connections fixed to wall or ceiling, laid in floor etc complete all as specified.

S&F pvc connection 15mm size with PTMT nuts of length 450mm complete all as specified.

S&F in repair 15mm CP Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.

S&F in repair 15mm size brass stop valves with crutch or butterfly handles high pressure screwed both ends for iron pipe complete all as specified.

Ditto all as per item No 67 above but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified.

S&F Pillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed etc all as specified.

S&F in repair 20mm size stop valves PTMT high pressure screwed for iron pipe complete all as specified.

S&F in repair towel rail 600mm long of PTMT incl chromium plated brass srews etc complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

M&L for framed work such as grill grating etc with end of bars rivetted or shouldered and rivetted or forged in to spikes , framed guard bars etc all as specified ( Fe 290 Gde E-165)

M&L preparing new surfaces of walls and applying two coats of white wash etc all as specified.

M&L for Preparing surfaces plastered or unplastered old surface of walls and applying two coats of white wash over existing surface to prepare the surface even and smooth complete all as specified.

M&L preparing surfaces of new walls and applying two coats of cement base paint in camouflaging pattern over and a coat of alkali primer complete all as specified.

M&L for Preparing surfaces plastered or unplastered old surface of walls and applying two coats of cement base paint in camouglaging pattern over existing surface to prepare the surface even and smooth complete all as specified.

M&L for three coats of white wash on ceiling on newly plastered surfaces complete all as specified.

M&L for two coats of white wash on ceiling on old plastered surfaces complete all as specified.

M&L for two coats synthetic enamel paint on new wooden surface over 10 cm width or girth over a coat pink primer complete all as specified.

Ditto all as per item 80 above but one coat on old treated surface complete all as specified.

M&L for two coats of synthetic enamel paint on new steel surface over 10cm width or girth over a coat red oxide primer etc all as specified.

Ditto all as per item 82 above but one coat on old treated surface etc all as specified.

M&L PCC 40 mm th 1:2:4 type B-0 using 12.5 mm graded stone agg as in levelling course.complete all as specified.

M&L for 75 mm th PCC 1:3:6 type C2 as in plinth protection with using 40mm graded stone aggregate etc all as specified.

S&F in repair PVC SWR pipe 110 mm dia single socketed in any length with rubber ring joints fixed to walls etc all as specified.

Ditto all as per item No 86 above but laid in trenches complete all as specified.

Ditto all as per item No 86 above but 75mm dia complete all as specified.

Ditto all as per item No 86 above but laid in trenches complete all as specified.

S&F in repair 75mm size PVC (SWR) floor trap plain with grating incl to jointing with waste pipe with adhessive etc all as specified

S&F 110 mm dia PVC SWR type bends any radius complete all as specified .

Ditto all as per item No 91 above but 75mm dia etc all as specified.

S&f 100 mm dia stack clamp made out of 25x4mm Flat iron etc all as specified.

S&f 75mm dia stack clamp made out of 25x4mm Flat iron etc all as specified.

M&L for 50mm th PCC 1:2:4 type B1 as in flooring incl finishing the surface even and smooth without using extra cement etc all as specified.

M & L Cement concrete 1:2:4 type B–1 using 20mm graded stone aggregates as in, copings, finishing side to path, including weathering, slightly rounded or chamfered angles and throating, as directed all as specified and directed by Engineer - in - Charge

Taking shutter only of any desription of size exc 2 each as directed all as specified and directed by Engineer - in - Charge .

S & F 1.25 mm thick of laths of steel rolling shutters, gear operated type with bevel gear box and crank handle as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed by Engineer - in - Charge

Repair ,servicing and overhauling of rolling shutter gear operated type with chain wheel and hand chain of any size by oiling , greasing to gear box , guide channel , shaft , pully and minor repair to gear box, hood cover, pully etc and replacement of minor parts like spring ,pins, lathe etc and including securing guide channel to walls with PCC 1:2:4 type B1 and making good the surfaces with CM (1:4) and making the rolling shutter make functional to the entire satisfaction of the Engineer in charge all as specified and directed by Engr-in Charge.

Supply and fixing informatory Sign board of size 1200 mm x 900 mm made of aluminium sheet 2 mm thick with stainless steel rectangular frame using 25 x 15 mm rectangular pipe with 35 mm dia stainless pipe in outer border all around retro reflective high intensity 400 micron thick yellow colour sheet (both side) pasted with heating process on both sides of the board including 75 mm to 100 mm high black colour letters cut to shape with special plotter and in proper manner incidating Shed No as directed by Engr in charge .02 Nos 75 mm dia stainless steel pipes of 304 grade glossy finish with MS plate 3 mm thick welded at bottom of pipes shall be provided the board shall be fixed at height of 3.0 mm (top level of board) above GL and shall be embedded in ground using PCC 1:2:4 type B-1 of min size 300mmx300mmx600mm including necessary form work.excavartion and earthbwrk complete all as specified and directed.

M & L 75 mm thick Cement conc type D- 2, 1:4:8 (40mm graded agg) as in PCC Floor and paving complete all as specified and directed by Engr - in - Charge.

M&L 25 mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in–Charge. Note: Punned down thickness shall be considered for measurement.

M & L Machine pressed precast conc. interlocking paver block (red and yellow) any shape and ,colour and size confirming to IS 15658-2006 of 80 mm thick M-40 grade with grey cement and with pigment complete all as specified and directed by Engr - in - Charge.

M & L Machine pressed precast conc. interlocking paver block (red and yellow) any shape,colour and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and with pigment complete all as specified and directed

M & L Cement concrete 1:2:4 type B–1 using 20mm graded stone aggregates in copings,, including weathering, slightly rounded or chamfered angles and throating, all as specified and directed by Engineer - in - Charge .

Taking down carefully aluminimum point wiring on TW Batten/in conduit / with conduit (light/Fan/socket or power) complete and making good the disturbed surface of wall/ceiling etc including taking down fitting such as switches, ceiling roses, pendants, Regulators,sockets, light fitting etc and removing material from site complete all as directed.

Material and Labour for concealed point wiring complete with1.5 Sq.mm (nominal area) FRLS PVC insulated multi stranded copper conductor in and including heavy duty PVC conduit (wall thickness 1.6 mm) inculding fitting & accessories, with MS concealed terminal boxes with 3mm thick laminated bakelite (Hylum/Anchor) sheet top cover for mounting switch,socket etc for one light/fan/bell point controled by one switch and regulator with PVC cable copper conductor including 1.5 Sqmm soild copper conductor with green FRLS PVC insulating earth common earth dolly, complete all as specified.

All as per ser item 107 above but for 3 pin socket out let 5 Amps on same board

All as per ser item 107 above but for 3 pin socket out let 5 Amps on independent board.

All as per srl item No 107 above but for 3 pin socket outlet 15 Amps with2.5 Sqm stranded copper conductor PVC unsheathed cable independent including PVC cable copper conductor 2.5Sqmm with green insulator as earth wire with cast iron/pressed steel terminal box all as specified.

Supply and fixing switch piano flush type 5 Amp single pole one way complete allas specified and as directed.

Supply and fixing switch piano flush type 15Amp flush type single pole one way complete all as specified and as diirected.

Supply and fixing socket outlet 5 Pin 5 Amps flush type multi purpose complete all as specified and as directed.

Supply and fixing socket outlet multi purpose 2 in one, 6 pin 15 Amps flush all as specified and directed..

Supply and fixing lamps holder ,PVC/Polycarbonate type with cord grip cap each suitable for pendant fittings complete all as specified and as directed.

Supply and fixing LED light fitting 1x20W,220V, AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of suitbale size from ceiling rose complete all as specified and as directed.

Supply and fixing ceiling rose surface bakelite 65 x 50mm three treminal complete.Make : Havells/SSK/Leader

Supply and fixing fan regulator electronic step type and making connection complete all as specified and as directed.

Supply and fixing sheet steel enclosurer with double door, detachable gland plates flush/surface mounting for MCB fitted with bus bar, bar and neutral link 4 way SPN 240 V complete all as specified and as directed.

Supply and fixing amps rating 240V 10KA 'C' curve minature circuit breaker (MCB) SPN 32 Amps complete all as specified and as directed.

Supply and fixing amp rating 240V,10KA 'C' curve miniature circuit breaker (MCB) SP 6 to 32 amps complete all as specified and asdirected.

Supply and fixing LED Street light fitting 60 Watt 230 AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.all as specified and as directed.

Supply and fixing ceiling fans complete with three blade down rod, accessories 230 V, 1200 mm sweep and BLDC, with Squirrel cage induction motor complete all as specified and directed Make : Crompton/Usha/Havells

Supply and fixing exhaust fan steel body AC single Phase,230 V of size 300 mm Sweep with blades and frame and lovers including making circular hole in existing wall to accommodation exhaust fan and necessary civil work and making good the disturbed surface complete all as specified and directed.

Material and labour for replacment of earthing with galvanized iron earth plate electrode 600mmX600mm,6mm thick buried directly in ground verticvally in a earth pit not less than 2.25mtr below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level connected to GI earth wire4mm dia by means of GI bolts , nuts, check nuts and washers ( earth plate covered with alternate layers of charcoals dust and common salt 15cm thick), GI earth wire protected by GI pipe light grade 15mm dia upto switch borad and connected to main switch board including provision of GI pipe 20mm dia light grade watering pipe with funnel and wiremesh, all as shown in electrical plate No. 3 of SSR Part-1 , including PCC chamber(1:3:6) using 20mm graded stone aggregate and CI cover and frame including all necessary excavation and earth work and taking out old earthing complete all as specified and directed

Supply, laying and testing cable XLPE insulated, screened, PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with standed aluminium conductor of size 10 sqmm 2 core.

Excavation in trenches in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of GI pipe etc or soil for shaft, walls, cesspts, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft/loose of soil complete all as specified & directed by Engr-in- charge.

Returning, filling in, including. Spreading. Levelling, watering and well ramming in layers not exceeding 25 cm thick each complete all as specified & directed by Engr-in- charge.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point soft/loose soil complete all as specified & directed by Engr-in- charge.

M&L for sand cushioning to under ground cable using sand and gently punning to cushioning to cable complete all as specified & directed by Engr-in- charge. Note: Punned down thickness shall be considered for measurement.

S&F common burnt clay building brick sub class B designation 75 completed all as specified & directed by Engr-in- charge.

S&F repair 40mm bore GI tubing "light grade" in trenches on pole for protection of cables completed all as specified & directed by Engr-in- charge.

AAY KAY Constructions (BID ID -3243612)

SUNRISE CONSTRUCTION COMPANY (BID ID -3243347)

HG construction (BID ID -3252097)