ADDN ALTN TO ROOF SHEET FALSE CEILING WALL PANELLING AND OTHER ALLIED WORKS OF B AND R AND E AND M WORK AT BLDG NO MES 22 SHILLONG CANTT AND PROVN OF RAIN SHELTER NEAR BLDG NO P 202 203 AND P 47 AT SHILLONG UNDER GE SHILLONG

Amount

Dismantling of plain or corrugated steel sheeting, any guage, thickness incl nainital or similar pattern as in roof coverings complete all as specified and directed

Dismantling Timber scantlings 40 sq.cm and over in section in any position framed work complete all as specified and directed

Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and directed

Taking down chowkats or frames n. exc 1.50 Sqm each with shutters (without taking off shutter from the frames) complete all as specified and directed

Dismantling Wall and Ceiling Boards (Fibre ,Pulp,insulation ,etc)or insulation boards /slabs/blankets ,any thickness,including cover fillets complete all as specified and directed

Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and getting out in soft/loose soil, all as specified .

M & L for Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M & L PCC 1:4:8 type D2 (using 40 mm graded aggregate) as in Foundation filling and mass concrete complete all as specified and directed

M&L for RCC 1:1.5:3 (Nominal mix) using (20mm graded aggregates ) as in fondation, footing, Plinth beam complete all as specified and directed

M&L for RCC 1:1.5:3 (Nominal mix) using (20mm graded aggregates ) as in columns, pillars etc complete all as specified and directed

M&L for RCC 1:1.5:3 (Nominal mix) using (20mm graded aggregates ) as in beam, lintel band over 1.50m span complete all as specified and directed

Formwork to sides of concrete foundations,footings, bases of columns, plinth beams and similar work with rough finished flat surfaces of concrete complete all as specified and directed

Formwork to sides of pillars, posts,struts,piers,columns and stanchions and similar work with rough finished flat surfaces of concrete complete all as specified and directed

Formwork to sides and soffits of floor or roof beam , lintels , cantilevers , shelves including supports , overhangs etc. also splays between floors and beams etc. and similar work with rough finished flat surfaces of concrete complete all as specified and directed

M&L for TMT bar 10mm dia and over cut to length ,bent to shape required including cranking , bending spirally for hooping column hooking ends and binding with mild steel wire (annealed ) not less than 0.9mm dia complete all as specified and directed

All as per item no 17 above but 5mm dia and over upto and including 10mm dia in stirrups ,spacers and binders complete all as specified and directed

S&F pre painted galvalume aluminium zinc cozting GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet as in ridge of 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for roof trussess (framed), trussed. Purlins, crane gantries, rails, and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces,cleats etc of Fe-290 (Gde-E-165) quality complete all as specified and directed

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

M&L for precast cement concrete block masonry with solid blocks exc 10 cm in width with PCC (1:3:6), type B-1, (using 20mm graded stone aggregate) and setting in CM(1:6) complete all as specified and directed.

M&L for brickwork with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M&L for PCC 1:3:6 type C-2(using 20 mm graded cr. stone aggr),75mm thick as in plinth protection finished even and smooth without using extra cement layed in bays not exc. 2.00mcomplete all as specified and directed

M&L for 15mm thick rendering in cement mortar (1:6) on brick/concrete surfaces finished the surface even and smooth without using extra cement complete all as specified and directed

M&L for Rendering 15mm thick on fair faces of concrete surfaces of wall in CM (1:4) and mixing with WPC @ 3% by weight of cement finished even and smooth without using extra cement all as specified and directed Note-WPC shall be measured and paid seperately as supply only

Supply only Integral water proofing compound

M&L for vitrified tiles dark shade (square /rectangular) polished area of each tiles exc 0.36 sqm but nexc 1.00 sqmin floors laid over and incl. 20mm thk CM (1:6) screed bed jointed in neat cement slurry and pointed with coloured cement to match the tiles.

All as Per Item no 29 above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4 complete all as specified and directed

Returning, filling incl spreading levelling watering and well ramming in layers n exc 25 cm thick each layer complete all as specified and directed

Removing of excavated soil to a distance exc 250m but n exc 500m and deposited where directed n exc 1.5 m above the starting point complete all as specified and directed

M&L for Precast cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain faces, including necessary formwork, fixing and set in CM 1:4.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as spd.

M&L for preparation of new wall surfaces and applying over 1mm of wall care putty complete all as specified and directed

M&L for for applying two or more coats (over 1 mm thick plaster of paris wall care putty) of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surface on new or previously untreated surfaces all as specified and directed.

S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed

S&F powder coated(powder coating min 50 micron) anodised door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified

S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and directed

M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

M&L for Prelaminated particle board of 9 mm thk board ,interior grade ,prelaminated one side with decorative choice lamination & other side balancing , white lamination , fixed with screws to timber frame work complete all as specified and directed

S&F PVC insulation panels with EPS stuck to 1mm with printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing complete all as specified and directed

M&L for 3D Wallpaper Self Adhesive of approved colour and design as per sample approved by GE complete all as specified and directed

S&F 15/16 mm thick pvc boards fixed with screws to timber frame complete all as specified and as directed

S&F 12 mm thick pvc boards fixed with screws to timber frame complete all as specified and as directed

S&F 0.90 mm thick pvc decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified

S&F extruded fancy type Brass handles fabricated type of size 150 mm complete all as specified and directed

S&F extruded fancy type Brass handles fabricated type of size 100 mm complete all as specified and directed

S&F for clip on cabinet hinge full overlay complete all as specified and directed by Engr-in-charge

S&F ball bearing drawer channel of size 600 mm long complete all as sspecified and as directed by Engr-in-charge

M&L for preparation of new wooden surfaces of any description over 10cm in width or girth and treated with two coats of synthetic enamel paint over pink primer complete all as specified and directed.

Surface dressing n exc 15 cm deep hard/dense soil complete all as specified and directed

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point.

Excavation in post holes not exiting 0.5 cum, getting out returing, filling in and ramming earth and broken hard core/rubble mixed with earth with around the layers not exiding 25 cm each layers watering and removing surplus soil to a distance not exceeding 50 cm making good complete in soft/ loose soil complete all as specified and directed

M & L for 40 mm thick PCC 1:3:6 type C1(20 mm graded) as in subfloors finished even and rough without using extra cement complete all as specified and as directed.

M&L for precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified.

M&L for Mild steel joist channel or angle or tee section,ms tube and fixed with ms flat iron cut into shape drilled and fixed with screw conforming Fe- 410 W (Gde-250) quality B complete all as specified and as directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with gray cement and pigment in floors over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified.

E/M SCHEDULE PART -II Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, in PVC Casing capping on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately .

Description all as per Srl item No.61 above but for socket outlet point 5 Amp on same board.

Description all as per Srl item No.61 above but for socket outlet point 5 Amp on Independent board.

Description all as per Srl item No. 61 here in before but for one bell point controled by one bell push .

Description all as per serial item No 61 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fix switch piano (ISI marked) Single pole 240 volts, 5Amps all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fix socket (ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed. Make- Havells/anchor/ Legrand.

Supply and fix switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make : Cona , Plaza, Anchor .

Supply and fixing flush bell push 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one complete all as specified and directed

S & F wall mounted LED batten fittings with all accessories 1X 9 Watt LED / foot light 6000K , extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size including taking down old unserviceable light fittings complete all as specified and directed

Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric and water connection and testing after installation. Make : Havells cat part no - GHWCAMTWH025 : /LG/Ronald.

S&F heat resistant PVC connection pipe for hot and cold water 450mm long 15mm dia. Make: Prayag or equivalent in Polytuf/ Havells/ Sona.

Supply & laying galvanized steel tubing, medium grade laid in trenches/floor/wall and joined including necessary fittings such as bends, elbow, tees, sockets, etc for 15mm dia pipe complete all as specified and directed

S & F in repairs Exhaust fan 230 volts , 450mm, steel body heavy duty including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall complete all as specified and directed Make Bajaj/Havell's/CG.

Supply and fix in repairs MCCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. . (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable .

Supply and fix MCCB TPN, 240 Volts, 100 Amps, 10 kA rupturing capacity415 Volts including taking down old one complete all as specified and directed

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's complete all as specified and directed.Make : Hager as per cat part- NCN106N, Schneider as per cat No : A9N4P32C or Indoasian as per cat No : 81195.

Supply,laying, and testing XLPE cable insulated,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with starnded aluminium conductor of size16 sqmm 4 core complete all as specfied and directed.

Supply,laying, and testing XLPE cable insulated,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with starnded aluminium conductor of size16 sqmm 2 core complete all as specfied and directed.

Excavation in trenches n exc 1.5 mtr wide and depth n exc 1.5 mtr deep for foundation, laying GI pipes and UG cables etc n exc 10 sqmtr on plan, in hard/dense soil and getting out complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M & L for providing dry river sand as in sand cushioning to UG cable including punning gently complete all as specified and directed.

Removing excavated material not exc 50 mtr and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M & L Sub class'B' old size well burnt brick laid flat in trenches as protection to LT cable complete all as specified and as directed.

Supply and fixing GI Tubing light grade under road, on pole floor and on wall for cable protection complete all as directed for following sizes 40 MM dia bore complete all as specified and directed

M & L for Sub main wiring with two runs of single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including PVC Cassing/ capping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 6 sqmm as pvc wire and one run of 6 sqmm as earth wire and one run of PVC casing/capping shall be measured as one RM.

M & L for Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including PVC Casing/ capping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 4 sqmm as pvc wire and one run of 4 sqmm as earth wire and one run of PVC casing/capping shall be measured as one RM.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete pre wired fixed to wall with 2 nos PVC block of suitable size complete all specifided and directed.

Supply and fixing LED security Building light LED 35 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete all specifided and directed. Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDL equivalent model as in Surya / havells .

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's complete all specifided and directed.

M & L for Sub main wiring with two runs of single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion complete all as directed.Note: (i) Two runs of 6 sqmm as wire and one run of 6 sqmm as earth wire and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I complete all specifided and directed.

M/S INSHA ELECTRICALS

M/s A L Traders

R K CONSTRUCTION

S K Construction

KIRAN REED INDUSTRIES

MS HO Shadap

M/S U.K ENTERPRISE