DCSEM/CQD/QSB/21-22/NIT/30 dated 22.07.2021

Amount

GENERAL ABSTRACT

PART - I - CIVIL WORKS

PART II - Rebate ITEMS

Description of Work / Item(s)

Amount

PART - I - CIVIL WORKS

Dismantling carefully the existing /Brick work / stone masonary /PCC /RCC along with finishing by chiselling without damaging existing structure including cutting the reinforcement etc. depositing the serviceable material at departmental store and disposal of debris inside Anushaktinagar colony at the location identified by EIC etc. complete all as per specification & as directed by the Engineer- in- Charge.

a) RCC/PCC

b) Brick work

Providing and laying 230/150mm consolidated thickness dry rubble stone hard core soling of following consolidated thickness in sub base to floor and in plinth protection to required levels and lines with first quality rubble, hand set, well packed including filling the interstices with smaller stone chips, supplying & finishing/ blinding the surfaces with approved blinding quality aggregates including watering, consolidation etc. complete as per Specifications, drawings & as directed by Engineer- in- Charge.

a) 230mm thick

b) 150mm thick

Plain cement concrete using graded stone aggregate of 20mm max. size including consolidation, finishing, curing, cost of form work, shuttering, centering etc. complete all as per specifications & as directed by the Engineer-in-Charge.

Brick work in super structure at all floor and levels in cement mortar 1:6 using well burnt locally available bricks of approved quality including scaffolding, racking out joints, curing, scaffolding etc. complete all as per specifications and as directed by the Engineer-in-Charge.

Providing & laying flooring / skirting with antiskid Vitrified tiles of first quality Endura of M/S H&R JOHNSON (INDIA) Ltd or M/s. Pavit or as approved equivalant of size 600 x 600 x 10mm & 15/16mm thick in required pattern and combination of series & Colour or as per manufacturer's specifications, laid directly over tile using polymer cum cement based adhesive manufactured by Roffe construction – NSA (non skid adhesive) or M/s Ardex Endura chemicals– Gold star or other approved equivalent make/removing existing flooring and fixing new flooring using 20 mm thick c.m. bedding with necessary cement slurry of required consistency under and over cement mortar bedding in respect of flooring and fixed over 12 mm thick backing cement mortar 1:4 (Using factory made Ready Mix Mortar only) in respect of skirting , close jointed and grouted white /colour cement slurry with pigments to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings / cut out wherever necessary including wastage for odd shape of room and final cleaning of surfaces as required, curing, etc. complete all as per specification, drawings, relevent IS code & as directed by the Engineer-in-charge.

a)In flooring with 600 X 600 X 10mm or as specified

b)In dado / Skirting Tiles of size as specified in 10mm thick including removing existing entire paint, plaster upto the brick work/concrete surfaces and new replastering in CM 1:4 (using factory made ready mix mortar only) and fixing of dado tile with polymer cum cement based adhesive as mentioned above.

Providing and laying at all floors and levels Vitrified tiles of first quality Marbonite of M/S H&R JOHNSON (INDIA) Ltd or other equivalent approved make of approved colour, shade, pattern and of 8/8.5mm thickness or as per manufacture's specifications, and fixed over 12 mm thick backing cement mortar 1:3 in respect of skirting , close jointed and grouted white /colour cement slurry with pigments to match the colour of the tiles, finished to level, line, slope and plumb including dismantling the existing with bedding / backing mortar, cutting of tiles, making openings / cut out where necessary including wastage for odd shape of room and final cleaning of surfaces as required, curing, etc. complete all as per specification, relevent IS code & as directed by the EIC.

a) In Dado / skirting / Riser with tiles of required size similar to Salt & Pepper (White) of M/s H& R Johnson (I) ltd or approved laid over 12 mm thick CM 1:4 (Using factory made pre mix/ready mix mortar only) backing, jointed with cement slurry & grouted with pigment of matching shade & finishing the top of skirting etc. complete, including dismantling the existing dado/skirting tile and backing cement mortar, disposal of debris inside Anushaktinagar colony at the location identified by EIC etc. complete all as per specification & as directed by the Engineer- in- Charge.

Providing and laying of Kotah stone for stair treads with making 3 rows of 5 mm X 5mm grooves by machine and nosing at all floors & levels using min 25 mm thick hand cut machine polished kotah stone slabs laid over 1:4cement mortar bedding including curing hand polishing removing / dismantling the existing with bedding / backing mortar and disposal of debris inside Anushaktinagar colony at the location identified by EIC etc. complete all as per specification & as directed by the Engineer- in- Charge.

Kotah stone flooring / dado / skirting at all floors & levels using Min 25 mm thick hand cut machine polished kotah stone slabs laid over cement mortar bedding as specified below, close jointed & pointed with matching slurry of cement finished to levels, slope or plumb, curing including removing, dismantling the existing with bedding / backing mortar & disposal of debris inside Anushaktinagar colony at the location identified by EIC etc. complete all as per specification & as directed by the Engineer- in- Charge.

a) In flooring with cement mortar 1:4, 20mm thick bedding and machine polishing after laying.

Providing and fixing stainless steel staircase hand rail with 2mm thick perforated stainless sheet panels using seamless pipe of 50mm dia pipe / Square tube hand rail/grab rail, & 25mm square tube with brushed finished/satin matt finished at stair case & lobby , all floors & levels conforming to SS-304 grade of steel, of schedule 10-S, as per pattern & design shown in drawing / directed by EIC, including necessary S.S bend, tees,brackets and glass holders clamps to hold glass pans in all size & shapes etc welding/nut bolt/ fastner necessary anchoring, polishing and fixing in concrete/brick wall with S.S lugs /fastner, making pockets, concreting, making good the surfaces including all wastages etc. as per specifications, drawings and as directed by Engineer-in-charge.

a) With SS-304 including all specials fittings,bracters etc.

b) 2mm thick perforated S.S. Sheet

Providing and fixing ISI mark oxidised M.S. single acting spring hinges of 150mm long including fabricating on old / new metal door, removing existing and depositing to department store, ncessary screw and bolts, etc. as per specification and as directed by Engineer-In-Charge.

Supplying, fabricating and fixing in position at all floors and locations Aluminium sliding/top hung/fixed/ adjustable louvered windows & ventilators with rivet joint of specified size, made of integrated approved colour/ bronze anodised matt finished (15micron thick) aluminium sections (extruded) of M/s Jindal/Indal/Hindalco or other approved manufacturer of all geometrical shapes and design with size and weights as shown in the drawing for frames and shutters including making exhaust fan frame work, handles of specified size etc,(including wastages if any) conforming to relevant IS specifications with all approved Bronze/colour anodised aluminium fittings and accessories, latching fixture, 2/3 rollers with ball bearing of superior quality all as shown in the drawing including providing and fixing anodised aluminium channel beading/glazing clips fixed with necessary bronze/colour anodised screws, grouting the gap with sealant and including dismantling of existing window frame and shutter, glass and depositing serviceable material to dept store and disposal of debris inside Anushaktinagar colony at the location identified by EIC etc. complete all as per drawing, specifications etc, all as directed by EIC.

Providing and fixing following thickness of clear float/ frosted / Bajara sheet glass of M/S Modi guard/ Saint Gobin/IAG or other approved equivalent manufacture and fixing with Aluminium frame work (door/ window) including fixing aluminium channel beading and providing and fixing 2 way EDPM gasketing to ensure water and air tightness and neoprene cushions/ gasket accommadated in grooves, necessary bronze anodised screws etc, all complete generally as per drawings specifications and as directed by Engineer in Charge

a) 5 mm thick clear float glass

b) 5 mm thick Bajra sheet glass

c) 3 mm thick Bajra sheet glass for louvers

Providing and fabricating and fixing in position structural steel grills at all level, using M.S. angles, flats, bars etc. with anchor fasteners of suitable dia in the marble jambs & cills including painting by dipping with two coats of synthetic enamel paint of approved shade & make and one coat of approved steel primer, including cutting,fabrication, welding etc complete all as per specification and as directed by the Engineer in charge.

Providing & laying machine cut machine polished Cuddapah stones/granite stone/marble stone/composite marble as mentioned followings for kitchen platform vertical support /shelves /window cill etc and including necessary cement mortar for backing/ bedding, close jointed and grouted with matching cement slurry and finished to line, slope, level, plumb, curing etc, as required including cutting of stone slabs,wastage, making cut outs wherever required and depositing serviceable material to dept store and disposal of debris inside Anushaktinagar colony at the location identified by EIC etc. complete all as per drawing, specifications etc, all as directed by EIC.

a) 18 mm thick machine cut and single side machine polished Baroda green marble stone for window cill in stepped form laid over 20 mm thick 1:4 cement mortar (Using factory made Ready Mix Mortar only) & overlapping of 20 mm shall be fixed with Araldite adhesive with best workmanship, including half round moulding & polishing of exposed face etc complete.

b) 18 mm thick machine cut and single side machine polished Baroda green marble stone for window cill, jamb, parapet top & bottom of lintel, stair riser in single piece laid over 20 mm thick 1:4 cement mortar (Using factory made Ready Mix Mortar only) including half round moulding & polishing of exposed face, necessary screwing at suitable span as directed by EIC etc complete.

(c) 18 mm thick Baroda green marble stone of surface finish for staircase tread / flooring with stone slabs of size 900 X 300 mm (approx) for edging including full half round moulding, machine polishing to edge to give high gloss finish, making 3 rows of 5 mm X 5mm grooves by machine and including 20 mm thick 1:4 cement mortar bedding.

(d) 18 mm thick granite stone of approved color and shade and surface finish for Flooring with stone slabs of various size in pattern including including 20 mm thick 1:4 cement mortar bedding. etc., complete as directed by Engineer-in-charge.

(e) 18 mm thick granite stone of approved color and shade and surface finish for dado/ skirting/cladding with stone slabs of various size in pattern including 12 mm thick 1:3 cement mortar bedding and applying araldite to the back of the Granite stone for fixing etc., complete as directed by Engineer-in-charge.

(f) 18 mm thick granite stone of approved color,shade and surface finish for staircase tread / flooring with stone slabs of size 900 X 300 mm (Approx) for edging including full half round moulding, machine polishing to edge to give high gloss finish, making 3 rows of 5 mm X 5mm grooves by machine and including 20 mm thick 1:4 cement mortar bedding.

g) 18 mm thick granite stone of approved colour and shade with approved finishing for flooring/ramp with 100 mm wide strip with stone slabs of required size & fixing in pattern including 20 mm thick 1:4 (Using factory made Ready Mix Mortar only) cement mortar bedding including polishing / edgeing to exposed face etc. complete.

Repainting of old painted surfaces with two coats synthetic oil bound distemper of approved shade and make over one coat of approved cement primer, including thoroughly scrapping, removal of old paint if any, sand papering & preparing the surfaces, applying approved stucco putty to entire surface to fill up crevices mild depression etc. scaffolding including cleaning of floors, doors & windows etc.& depositing serviceable material to dept store and disposal of debris inside Anushaktinagar colony at the location identified by EIC etc. complete all as per drawing, specifications etc, all as directed by EIC.

Repainting of old painted wooden/steel surfaces with two coats of synthetic enamel paint using first quality synthetic enamel paint of approved make and shade over one coat of approved wood/steel primer including preparing surfaces, filling with putty scaffolding and cleaning etc. including removing old paint by scrapping, blowlamp and disposal of debris inside Anushaktinagar colony at the location identified by EIC etc. complete all as per drawing, specifications etc, all as directed by EIC.

Providing and applying one coat of base primer (Apex Ultima protect of M/s. Asian paints or Aquatech of M/s. ICI Dulux or equivalent) and two top coats of acrylic water proof exterior coating of Apex Ultima Protek of M/s. Asian Paints / Weathershield flexx rainproof system of M/s. ICI Dulux or other approved equivalent make and shade over the sand face / form finished surfaces / rough cast plaster at all locations as required, thoroughly mixed and applied at an interval of 6-8 hours for each successive coats and ensure consumption of 0.47 ltr/Sqm for 3 coats,(base coat @.29 Ltr/sqm & two top coats @0.18 Ltr/sqm ) for sand face surfaces including preparation of surface, cleaning and filling the cracks and crevices with Latex caulking crack filler etc. Complete generally as per the manufacturer's specification and as directed by the Engineer-in-Charge.

a) Over existing sand faced plastered / Form finished surfaces with two coats paint over one coat primar

b) over rough cast with two coats paint over one coat primar

c) Over sand faced plastered / Form finished surfaces with one coat paint

Repairs to RCC structural members, concrete surfaces / RCC form finish surfaces, using Polymer comprising of following operations: i) Breaking cracked / spalled concrete members along the cracks with plaster, including removing and stacking of all unserviceable material at site, simultaneous transportation and disposal of debris inside Anushaktinagar colony at the location identified by EIC etc. ii) Exposing and cleaning the reinforcement thoroughly by light tapping / wire brushing of using strong emery paper and finally by rust remover of Dr. Fixit/ M/s Anuvi Chemicals, M/s fosroc or equivalent. iii) Applying a coat of polymer and cement slurry in the ratio 1:1 by volume to the reinforcement bars.

a) Building up with polymer modified cementatious mortar for RCC structural members etc. in layers not exceeding 20 mm in a day (proportion – cement 50 Kg. : Silica sand 125 Kg. : polymer liquid 10 ltrs.) with necessary bond coat (polymer : Cement = 1:1 by volume) for tack coat and also for subsequent layers using polymer including curing, covering the flooring /window with tarpaulins or equivalent covering material to avoid deposition of polymer mortar and cleaning of floor / windows thoroughly on completion of repair work etc. complete all as per specifications and as directed by the Engineer-in-charge

Cement plastering using factory manufactured pre mix/ready mix mortar in CM 1:4 of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechnical mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied on internal wall and ceiling finished smooth with POP over brick walls or concrete surfaces at all floors and levels, including membrane curing by applying one coat of factory made curing compound Resikure of M/s Anuvi Chemicals, Concure of M/s fosroc, Dr. Fixit curing compound or other equivalent over repaired surfaces as per manufacturer's specification and removing existing damaged/ worn out plastering and depositing serviceable material to dept store and disposal of debris inside Anushaktinagar colony at the location identified by EIC etc. complete all as per drawing, specifications etc, all as directed by EIC.

a) 12 mm thick

b) 15 mm thick.

Sand faced cement plaster 20 mm thick in CM 1:4, two coats using factory manufactured pre mix/ready mix of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Build Well ready mix plaster ' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd / Readymade polymerised Dry mix Plaster - Silicoplast of M/s. Precise Conchem Pvt. Ltd.or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces with base coat of 12 mm thick and finishing coat of 8 mm thick final rendering, including using richer mix for making corners if necessary and making nosing / dripmould in plaster wherever required, at all floors and levels, including making grooves of existing size wherever required, including cleaning the surfaces, including membrane curing by applying one coat brush, roller or spray using acrylic based curing compound i.e. Resikure of M/s Anuvi Chemicals/ Concure Of M/s. FOSROC or other equivalent ( as per manufacturer's specification ) including removing existing damaged/ worn out plastering and depositing serviceable material to dept store and disposal of debris inside Anushaktinagar colony at the location identified by EIC etc. complete all as per drawing, specifications etc, all as directed by EIC.

Providing and fixing colored paving chequered cement tiles of approved Shot blasted finish top surface of 30mm thick of size 300mm x 300mm of M/s.Super Tiles(Super precast and Infrastructure) or equivalent approved manufacturers as per approved design,pattern,shade for flooring and dado/skirting laid over concrete parking or footpath in 20mm thick cement mortar 1:4 bedding and jointed with cement slurry & grouted with pigment of matching shade including filling the joints and disposal of debris inside Anushaktinagar colony at the location identified by EIC etc. complete all as per drawing, specifications etc, all as directed by EIC.

a)In flooring with 300 X 300 X 30mm or as specified

b)In dado / Skirting Tiles of size as specified in 30 mm thick

Loosening and providing temporary supports of existing electrical fittings/ fixtures/ board/other boxes for carrying out tiling work etc. and refixing it after completion of renovation including supplying & fixing casing capping & electrical wire wherever required in consutant with related unit/engineer as per deptt. specification etc complete all as directed by the EIC

Fabricating, supplying and fixing mail boxes made out of 22 guage thick sheet of stainless steel 304 grade non-corrosive matt finish of approximate over all size of box 230 mm x 330 mm, depth 55 mm at bottom & 75 mm at top, fitted with openable shutter top hung/ bottom hung with S. S. rebate flap for the letter opening etc. and with superior quality brass cam lock 5 lever (Godrej make or equivalent) with brass duplicate keys, marking flat no. on the front side of each mail box by embossing on brass/ Aluminium sheet riveted, providing and fixing 20 guage, 3 nos. S.S. Stiffners inside (one for fixing lock and Two nos. to prevent letters from falling while opening) fixing on the S.S. Angle with fasteners & bracket by making drill hole wherever required & using 4 nos. of S. S. nut & bolts for each letter box as per the standard practice etc. complete all as directed by the Engineer- in- Charge.

Providing and fixing in position at all floors, levels / heights 18 mm thick mirror polished natural stones slab for door frame in two overlapping layers one piece full length / height of approved shade, finished sizes as directed including machine cut / hand cut, final cleaning, moulding and polishing of exposed edges, in line, level, plumb and fixing the stone with cm 1:3, 20mm backing & overlapping of 20mm shall be fixed with Araldite adhesive, with best workmanship, finishing, curing, including removing existing door frame, shutter & fittings etc.and depositing the same at dept store and disposal of debris inside Anushaktinagar colony at the location identified by EIC etc. complete all as per drawing, specifications etc, all as directed by EIC. Note: 1) All finished natural stones shall be applied with araldite or equivalent stone adhesive on back surface spreading/splashing of sand particles on adhesive applied surface before a day of fixing of stones. 2) Agencies shall quote rate accordingly.

a) Jet black granite Stone

Supplying & fixing 25 mm thick PVC integral free foam sheet in form of flush finish door shutter, manufactured by M/s. Jain Irrigation Systems Ltd. (Ex-cel sheet) , Rajashree Plastiwood or other equivalent approved make of white colour, solid section, extruded rigid, light weight sheet with fine & homogeneous closed cell structure with smooth, glossy, hard surface finish on both sides including providing recessions for hinges and providing & fixing 3 nos 100 mm heavy duty S.S. hinges and 2 Nos. 100 mm heavy duty aluminium baby latches, 2 nos. of 100 mm Al. Bow handles with back plate of M/s Shalimar Hardware or equivalent and including providing a vision panel opening of size 300 mm X 200 mm including providing and fixing PVC moulded louvers on both faces in the opening of vision panel with ss screws, all edges to be smooth finish with mixture of PVC powder & solvent etc complete all as per specifications and as directed by the EIC.

Providing & laying at all floors & levels first quality ceramic tiles of minimum thickness as specified by the manufacturer of M/S. H&R JOHNSON (INDIA) Ltd. or equivalent approved make of approved colours, shade and texture in flooring / dado / skirting as per approved pattern. incluidng cost of all materials, including cutting the tiles to required shape, wastage, pointing the joints with white cement mixed with matching pigments to match the colour of the tiles, finished to line, level, slope & plumb, final cleaning of surface as required, curing , making necessary opening cutouts etc.and including removing existing flooring / dado and depositing serviceable material to dept store and disposal of debris inside Anushaktinagar colony at the location identified by EIC etc. complete all as per drawing, specifications etc, all as directed by EIC.

a) In dado / Skirting with tiles of 300X450mm (Approx size) of Digital HD Series of M/s H&R johnson (India) Limited or approved equivalent fixed over 12 mm thick 1:4 cement mortar (Using factory made Ready Mix Mortar only) backing / fixed directly over existing tile with polymer cum cement based tile adhesive manufactured by M/s. Roffe construction (Non-Skid Adhesive, NSA) or M/s Ardex Endura (Gold Star) or other approved equivalent, jointed with cement slurry & grouted with pigment of matching shade & finishing the top of skirting/dado etc. complete.

Providing and fixing 304 grade Stainless steel letter with lacquer finish in Hindi and English including marking,cutting,making to required size and shape of approx. width upto 345mm , height upto 360mm and depth 30mm with golden plating at all levels and locations…… etc. complete at all levels and as directed by Engineer in charge.

Providing and fixing in position square mouth UPVC Gully Trap of size 150 x 150 mm square and 110 mm n.b. outlet with grating of approved make embedding the trap in 100mm alround 1:2:4 cement concrete,including construction of brick masonry chamber 300 mm x 300 mm (internal ) upto 600mm depth in 230 mm thick brick masonry, embedding the trap, plastering with cement mortar 1:3, 20 mm thick on inside, outside and all exposed faces, finished with a floating coat of neat cement, providing and fixing precast EVERLAST Composite(FRP/GRP) cover with frame of size 300mm*300mm having point loading capacity of not less than 0.3 tonne as approved including removing the gully trap and depositing serviceable material to dept store and disposal of debris inside Anushaktinagar colony at the location identified by EIC etc. complete all as per drawing, specifications etc, all as directed by EIC.

Supplying and fixing following size uPVC UV-Stabilised soil / waste quality pipes and fittings for soil, waste, vent, antisyphonege, HVAC waste pipe and rain water pipe lines consisting following items of work:- i) Providing and fixing uPVC UV-Stabilised Soil / waste pipe as per IS:13592 and IS:14735 Grade-B laid in floor & on Exposed faces of wall of Supreme make or equivalent ii) Fixing the pipeline vertically by Metal clamps with rubber seal of Supreme make Cat. No. SWRMCR 1 to 6. iii) Providing and fixing uPVC cowl at the top of soil, waste water & vent pipe line. iv) Laying the pipe below floor/ground to proper slope and gradient for making connections of soil pipe line with inspection chamber or Manhole, waste water connection with Gully trap Chamber including the cost of cement mortar, cement concrete,water proofing compound etc. v) Jointing the pipe with Solvent Cement & Rubber ring gasket with making holes in walls / floor grooving and redoing the same and brick support etc. Giving water-tightness test for the pipes laid as per codal provisions. Providing Ring Joint pipes at verticals and solvent cement jointed pipes at consealed locations. vi) Necessary cutting to the required length including short pieces, fittings with & without door, assorted fittings such as plugs, tees, couplers, reducers, cross tees, reducing tees, elbows, bends, cleaning pipe, single & double Y, vent cowl, WC connectors, offsets etc. vii) Dewatering the pit / trench if necessary, till completion of work. viii) Depositing serviceable material to dept store and disposal of debris inside Anushaktinagar colony at the location identified by EIC. For Soil & waste pipe lines

a) 50 mm dia.

b) 75 mm dia.

c) 110 mm dia.

d) 160 mm dia.

Providing CPVC Pipe of SDR 11 grade for Spouts at any level inside and outside of building for water drain outlet in various location wherever required including making hole, providing variouse dia CPVC Pipe with required length,Same Dia T at the end, packing the hole with ready mix plaster material 1:4 / concrete as per required grade to close extra opened portion during making hole restore the surface to its original finishes and water tight etc. complete all as per directed by Engineer-In-Charge.

a) 32 mm n.b

b) 40 mm n.b

Jacketing and strengthening of R.C.C element with free flow self compacting micro concrete made with Roff concrete Repair (Super flow micro concrete) manufactured by M/S. Roff construction chemical, (or) Renderoc RG manufactured by M/s. Fosroc chemicals (India) limited (or) ESSEN construction chemical or other approved equivalent make, which consist of dismantling loose concrete along with plaster, cleaning the reinforcement thoroughly with wire brush and finally with acetone, making micro concrete by mixing prepacked dry micro concrete and water in proportion as prescribed by the manufacture, mixing them thoroughly for 5 minutes for achieving free flow state of micro concrete, pouring the micro concrete in layers, compacting the concrete by blowing strokes with 16mm steel rod curing for 10 days (curing shall be commenced immediately after 4 hours of pouring concrete) etc. including providing shuttering and depositing serviceable material to dept store and disposal of debris inside Anushaktinagar colony at the location identified by EIC etc. complete all as per drawing, specifications etc, all as directed by EIC.

Description of Work / Item(s)

Amount

Part II - Rebate items

Rebate for Taking away dismantled item by the contractor

a) old Railing wooden batten , door frame

b) old M.S. window/ grill / dog door

c) Old pannel door

d) Old mail boxes

MAHENDRA REALTORS AND INFRASTRUCTURE PVT LTD

ANUBHAV ENGINEERING COMPANY

Avtar Interiors Pvt Ltd

OMKAR ENGINEERS AND CONTRACTORS

Sai Sales Corporation

Renjin Construction

Ramesh And Associates

KALPANA STRUCT CON PVT LTD

ANS Constructions.com

K Rajesh and Company

UCC INFRASTRUCTURE PVT LTD

ANUBHAV ENGINEERING COMPANY

MAHENDRA REALTORS AND INFRASTRUCTURE PVT LTD

Avtar Interiors Pvt Ltd

OMKAR ENGINEERS AND CONTRACTORS

Sai Sales Corporation

KALPANA STRUCT CON PVT LTD

Renjin Construction

Ramesh And Associates

ANS Constructions.com

K Rajesh and Company

UCC INFRASTRUCTURE PVT LTD

Avtar Interiors Pvt Ltd

Renjin Construction

OMKAR ENGINEERS AND CONTRACTORS

Sai Sales Corporation

SHANKHESWAR ENTERPRISES

ANUBHAV ENGINEERING COMPANY

K Rajesh and Company

UCC INFRASTRUCTURE PVT LTD

Ramesh And Associates

ANS Constructions.com

KALPANA STRUCT CON PVT LTD