Constr of 0.5 KM Chain Link Fence

Angle Iron picket 3.375 M long (‘V’ Portion 2x0.375 M + Chain link fence 2.075 M + Below GL 0.400 M + Cleat 0.15M) 'Y' Type (50x 50 x 5mm) weight approx 12.825 Kg with 06 Nos holes of size 12 mm dia on one side for fixing of chain link fecing with flat iron and three notches of both side "V" portion suitable for fixing of barbed wire all as per IS-808 : Re-affirmed 1999 (Amdt –I) including drilling welding and cutting of holes complete. Picket shall be painted a coat of red oxide primer. Make - SAIL/ TATA/ JINDAL. FOR : UDHAMPUR

Angle Iron picket 2.40 M long (1.85M+.400M below GL+0.15M cleat) (50x 50 x 5mm) weight approx 9.12 Kg with cutting 05 Nos notches suitable for fixing of barbed wire as per IS-808 : Re-affirmed 1999 (Amdt –I) including welding and cutting of notches etc complete. Pickets shall be painted a coat of red oxide primer complete all as specified. IS – 2721 – 2003. Make - SAIL/ TATA/ JINDAL (For supporting of concertina coil in enemy side) FOR : UDHAMPUR

Barbed wire 2.24 mm dia, minimum length of 450m in 50 Kgs of roll,Galvanized Barbed wire shall be of 2 strands conforming to IS 278-1978. It shall consist of 2 line wires of 2.24mm dia with dia of barbs 2mm at 75mm centre to centre. The barbs shall have a length not less than 13 mm and not more than 18mm with sharp pointed edges. The line and point wires shall be circular in section, free from scales and other defects and shall be uniformly galvanized. The line wire shall not contain any welds and should be continuous. FOR : UDHAMPUR

Chain link fence shall be fabricated using hot drawn GI wire of dia 4 mm and size of mesh 50x50 mm including two line wire (at Top & bottom) ISI marked conforming to IS : 2721:2003 FOR : UDHAMPUR

MS flats of size 40x5 mm length 2.075 meter long,1.57 kg/m having section as per IS 1731: 1971 having predrilled 06 nos holes of 12 mm dia (as same distance at ‘Y’ type picket) FOR : UDHAMPUR

MS round bar 03 Nos 10 mm dia 3.1 M long WT @ 0.617 kg/Rm with eyelets at both ends 50-60 mm long for fixing Top, middle and bottom for fastening as per IS 1732: 1971. FOR : UDHAMPUR

Nut and bolts 50 mm long of 10 mm dia with two Nos washers of 3 mm thickness as per IS 1732: 1971. FOR : UDHAMPUR

Punched tape concertina coil (including spike and handle) with 50 turns and dia 1050 mm, having a 2.60 mm core wire of high carbon spring steel of high tensile strength. The punched tape and core wire are electro galvanised to provide protection against out door exposure. The punched tape is mechanjically crimped over the core wire and then formed into a coil at various parts of the periphery of the coil, steel clips connect the individual width of barbed a 9 mm and spacing of clips 23.5mm to 24.5mm C/C. The weight of each coil will be 15.2 (+_5%) Kg without packing material and coil length 15 Mtr when opened up. Each coil wound with bituminised Hessian cloth for providing protecdtive coasting as per specification NO IND/ENG/ PROV/ 1245 is for raw material and drawing IMGA-0112/B(sheet 1 of2), IMBA-0112/C(sheet 2 of 2), IMPD-1817/B, IMPD-1820, IMPD-1821/B and IMPD-1822/B FOR : UDHAMPUR

Punched tape concertina coil (including spike and handle) with 50 turns and dia 600 mm, having a 2.6 mm core wire of high carbon spring steel of high tensile strength. The punched tape and core wire are electro galvanised to provide protection against out door exposure. The punched tape is mechanjically crimped over the core wire and then formed into a coil at various parts of the periphery of the coil, steel clips connect the individual width of barbed a 9 mm and spacing of clips 23.5mm to 24.5mm C/C. The weight of each coil will be 9.50 (+_5%) Kg without packing material and coil length 7.50 Mtr when opened up. Each coil wound with bituminised Hessian cloth for providing protecdtive coasting as per specification NO IND/ENG/PROV/1245 is for raw material and drawing IMGA-0112/B(sheet 1 of2), IMBA-0112/C(sheet 2 of 2), IMPD-1817/B, IMPD-1820, IMPD-1821/B and IMPD-1822/B FOR : UDHAMPUR

GI Binding wire 0.9 mm dia FOR : UDHAMPUR

(a) Synthetic enamel paint, of OG colour Ist quality conforming to IS 2932-2003. Make - ASIAN PAINTS (APCOLITE BRAND)/ BERGER (LUXOL HI GLOSS) / GOODLASS NEROLAC (FULL GLOSS) / SHALIMAR (SUPERLAC). FOR : UDHAMPUR

(b) Thinner. Make: J&N / Asian / Berger. FOR : UDHAMPUR

(c) Paint brush 4".Make: Super Horse/Horse Gold /Horse 7/ Kirpal. FOR : UDHAMPUR

(d) Paint brush 3".Make: Super Horse/Horse Gold/ Horse 7/ Kirpal. FOR : UDHAMPUR

(e) Paint brush 2". Make: Super Horse /Horse Gold/Horse 7/ Kirpal. FOR : UDHAMPUR

GLOBAL METALTECH

RIDHI SIDHI ENGINEERS