Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45 LAccepted-AOC | L1 | Accepted-AOC OK | |
| 2 | L2₹48.0 L+₹3.0 L (6.68%)Accepted-AOC | L2 | Accepted-AOC OK | |
| 3 | L3₹48.7 L+₹3.7 L (8.14%)Accepted-AOC | L3 | Accepted-AOC OK | |
| 4 | L4₹51.0 L+₹6.0 L (13.4%)Accepted-AOC | L4 | Accepted-AOC OK | |
| 5 | L5₹54.1 L+₹9.1 L (20.2%)Accepted-AOC R O ZANGSTI LEH LADAKH 194101 | LEH | LEH | LADAKH | 194101 | L5 | Accepted-AOC OK |
Tender Value
₹44.7 L
EMD Value
₹89,400
Closing Date
18 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Partapur
GE Partapur
Special repair to Bldg No T-211 Offrers Living T-139 Hangar No 1 T-07 and T-09 Toilet Block under GE Partapur
2023_MES_620776_1
GE/P-57/2023-24
Open Tender
Civil Works
Item Rate
275 days
GE Partapur
As per tender documents and NIT
8 documents required · 8 mandatory
₹500
GE Partapur
₹89,400
Yes
3 Feb 2024
27 Sept 2023
20 Oct 2023
27 Sept 2023
18 Oct 2023
11 Oct 2023
29 Sept 2023 - 4 Oct 2023
Amount
Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above gd level).Complete all as specified and directed.
Demolition of reinforcement cement concrete as in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work (reinforcement cut as reqd to facilitate demolition)
Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board/slabs/ blanket any thickness including cover filllets.
Dismantling timber in fillets, rails,post,rafters purlins etc under 40 sq cm in section
Demolition of Brickwork or stone/ boulder masonry/ PCC block masonary , built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
Taking down chowkhat or door frames including shutters n exc 1.5 sqm each complete
Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removing from site all as specified & directed.
Taking down shutters of any description n.exc 1.00 sqm and removing from site all as specified & directed.
S&F Roof trusses (framed), trussed , purlins , crane gantries, rails etc (beam , tee , angle, channel or flat sections) all as specified.
S&F for wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165
S&F Plain, galvanised, mild steel sheeting of 0.63 mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as spd and as drected by Engr-in-Charge
S&F Galvanised MS sheeting of 0.63 mm thick corrugated with two cougation side laps and fixed with J hookes two framed work with PVC and steel washers as in roof & wall with grade of zinc coating 275 all as spd and as drected by Engr-in-Charge
M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier.
All as per above item but single coat on old steel surfaces incl preparation.
M&L preparation of new wooden surfaces, two coats of synthatic enamel paints, over a coat of pink primer, surfaces of any discription, not otherwise discribed, over 10 cm width or girth for doors,ceiling, complete.
M&L preparation of old wooden surfaces, and applying one coats of synthatic enamel paints, surfaces of any discription, not otherwise discribed, over 10 cm width or girth for doors,ceiling, complete.
S&F in repair brass chromium plated tubular towel rail , 20mm dia in repair complete all as specified & directed
S&F Mild steel, plain, black sheet 1.0 mm thick in wall cladding steel gates and similar work, cut to size, holes punched; including ound headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles,etc. as required
M&L for Repair to sliding Steel door of min Size (2.10m x 4mtr)-08 Nos incl , repair of roller of door and self locking system of door,complete with dovetailed or welded incl taking down and refixing of door after repairing
Providing cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 50 mm thick as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays complete all as specified and directed.
M&L for Reinforced Cement Concrete type B1 1:2:4 (nominal mix ) (using 20 mm graded stone aggregate) in Chajjas etc.
Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality
Use and waste rough finished Form work to edges of concrete floor and roofs and similar work exceeding 5 Cm but not exceeding 10 Cm wide.
M&L 25mm thick Cement concrete 1:2:4 type B-0 using 12.5 mm graded stone agg. as in sub-base/under flooring complete all as specified and directed.
M & L for 100 mm thick PCC 1:4:8 type D-2(40 mm graded stone agg) in sub base coarse complete
M&L for Chequered cement concrete tile 20cmx20cmx 25mm thick ,set and jointed over 20 mm screed bed in CM 1:4 and pointed in neat cement slurry in floor with grey pigment cement and pigment complete
M & L for Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) are of each tile exceeding 0.06 Sqm but n exc 0.11 sqm in floors set and jointed in neat cement slurry over screed bed or bedding layer of cement mortar 1:4, 15 mm thick and pointed in white or coloured cement to match complete.
M & L for Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) are of each tile exceeding 0.11 Sqm but n exc 0.18 sqm in floors set and jointed in neat cement slurry over screed bed or bedding layer of cement mortar 1:4, 15 mm thick and pointed in white or coloured cement to match complete.
M&L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on 10mm thick back coat in cement mortar 1:3 complete all as specified.
M&L for white glazed ceramic tiles in vertical surface 300x200x7 mm thick set and jointed in neat cement slurry over 10 mm thick rendering in CM 1:3 and pointed in white to match complete.
M & L for Providing, cement concrete 1:2:4 type B-1(20 mm graded stone agg) in rounded or chamfered on edges , bed plates, kerbs , water troughs and the like including slightly rounded or chamfered angles as directed
M & L for plain fillet 2 nd class Hard wood section are exc13 cm but n exc 25 cm in square,rectangular or triangular in section, clean sawn,secure with nail or brads complete
S&F plain, solid, straight chowkats of second class hard wood and frames, wrough, framed rebated on the solid, rounded or chemfered, put together with glue pinned at joints
S&F 30 mm thick 2nd class hard wood plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm thick BWP commercial; ply or 12mm thick veneered particle boards on both sides. The size of rail and style as per IS-1003 (part-I) kiln seasoned and chemicaly pressure treated.
M&L for 30mm thick IInd class Hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc.(without sash bars) edges of framing plain, chemfered fitted with cut and mitred beads for securing glass, etc fitted to chowkat
M & L for 9 mm thick prelaminated particle board,in wall interior grade,prelaminated one side with decorative choice lamination &other side balancing white lamination,fixed in wall with nail to timber frame work complete
M & L for 9 mm thick prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination &other side balancing white lamination,in ceiling fixed with nail to timber frame work complete
M & L Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails. comoplete all as specified and as directed.
S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples
All as per above item in before but fixed in repair.
Hacking out old broken glass (any thickness, size, quality or description) from steel or wooden frames or stone, concrete or brick surroundings; glazing with putty or fixed with beads complete all as specified & directed by Engineer-in-Charge
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty / wooden beeding in square n. exc 0.5 sqm each panes complete all as specified
S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 sqm each panes complete all as specified
S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed.
S&F 75mm aluminium anodised barrel tower bolts of extruded section and fixed.
S&F 125mm aluminium handles, cast type ,anodised and pattern/design as approved.
S&F 75mm aluminium handles, cast type ,anodised and pattern/design as approved.
S&F for 100mm long butt hinges mild steel medium weight cold rolled complete all as specified & directed
S&F for 75mm long butt hinges mild steel medium weight cold rolled complete all as specified & directed
S&F 200mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
M&L for Providing precast cement concrete solid building blocks or slabs 10cm thick Type B1 (1:2:4) with 20mm graded stone agg (with plain or interlocking joints as directed) setting in mortar (1:4) , complete, in walls
M&L Precast cement concrete block masonry with solid blocks exc 10 cm in width and set in cm 1:6, type C1 1:3:6 (20 mm graded aggregate).
Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store.'
S&F for 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors of 20 mm dia complete, all as specified & directed.
S&F 75mm dia, Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specefied and directed
S&F for 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed and fixed in repair.
S&F, PVC connection of 15 mm size with PTMT nuts of length 450 mm , complete all as specified and directed by Engr-in-charge.
S&F 32mm bore waste pipe for WHB complete all as specified & directed by Engineer-in- charge.
S&F in repair brass chromium plated tubular towel rail , 20mm dia in repair complete all as specified & directed
S&F in repair Bib taps chromium plated , cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair 15mm bore complete all as specified
S&F in repairs 15mm Stop valves / Angle valve, fancy type CP, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete, all as specified & directed by Engineer-in-charge.
S&F in repairs 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F in repair plastic water closet seat white closed pattern with flat botom and cover mild steel chromium plated or aluminium plated or aluminished hinging device complete all as specified and directed.
S&F in repair replacement vitreous china wash down water closet pan (pedestal pattern) white with trap including connection to existing out joint pipe, flushing pipe or cistern, antisyphonage pipe, including making good to floor etc complete all as specified and directed
S&F for in replacement vitreous China squatting pan 'Orissa' pattern of size 580mm x 440mm white with integral foot rests including P or S trap and making connection to trap and flush pipe and making good the floor to existing specifications complete all as specified.
S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S&F for factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & directed.
S&F in repair vitreous china washbasin, white, flat back, size 550 x 400mm, including brackets & incl 32mm bore waste fitting brass, CP for glazed ware basinetc with long screwed shanks and fly-nuts flange end bedded in red lead cement and other end fixed including pedastal for washbasin complete all as specified.
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified
S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, jointed with solvent fixed to walls complete all as specified.
S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, jointed with solvent fixed to walls complete all as specified.
S&F in repair PVC (SWR) bend 110mm bore of any redius complete all as specified & directed.
S&F Soap dish fixed to walls with chromium plated brass screws complete all as specified.
S&F in repair PVC bathroom cabinet mirror size 350mm x 450mm all as specified & directed.
S&F in repair chromium plated (CP) Towel Ring fixed with and including Chromium plated brass screws and wooden/ plastic cleats (Minimum weight 90gms)
Dismantling water tanks of capacity exc 500 ltrs & n.exc 1000 Ltrs and removing to store.
S & F puff water tank 500 litres capacity, insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature -30 degree to +35 degree celcius fixed in position with all fittings over PCC platform, complete all as specified and as directed.
S&F in repair curtain rod made out of 25mm dia (outer dia) pipe having thickness 0.63mm , PVC coated and colour /pattern, over all dia 28 to 29 mm complete all as specified and directed
S&F plastic finial of 28 to 29mm bore, decorated type, of any colour/pattern, best quality to suit the curtain rod and fixed at the end of curtain rod with suitable adhesive complete all as specified and directed
S&F mild steel prepainted bracket to hold the curtain rod and fixed to wall(Concrete/brick masonry) with the help of 2 Nos 50mm long steel screws and rawl plug included drilling with electric drill and making good the disturbed surfaces complete all as specified and directed.
Excavation in post holes ( or similar holes) in Hard/dense soil ,each not exceeding 0.50 cubic meter in any type of soil , getting out, retruning filling in watering and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm and removing surplus soil to a dsitance n.exc 50 mtr and making good surface.
S&F Compound girders and stanchions, lattice girders, aerialmasts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars etc.Fe 410-W (Gde-E- 250) quality-A.
M&L for Rendering 15mm thick on fair faces of stone masonry work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete.
M&L two coats of cement based paint on newly plastered surface including prepration of surface.
M&L for applying one coats of cement based paint on walls incl preparation of old plastered surface.
M&L for applying two coats of white wash on walls incl preparation of old plastered surface.
Taking down carefully damaged copper/aluminum point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, cassing & capping, pendants, sockets, light fitting etc and making good disturbed surfaces of wall/roof complete all as specified and directed.
Taking down of MCB DB/TPN any type including MCB SP/SPN and making good of wall complete all as specified and directed.
M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.
(a) One light point controlled by one 5 Amps one way switch
(b) One 3 pin socket outlet 5 Amps on independent board
(c) One 3 pin socket outlet 5 Amps on same board
M&L point wiring for power point with 4.0 sqmm (nominal area) copper conductor FRLS cable ( multi-stranded) PVC insulated and unsheathed cable conductor 1100 Volts drawn through PVC casing capping of suitable size(as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 2.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.
S & F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed by Engr-in-Charge.
S&F switch socket combination 3 pin, 5 Amps, 1 flush type (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage.
S&F switch socket combination 3 pin, 5 Amps, 2 in 1 flush type (multipurpose) sutable for 2 pin/3 pin plug complete all as specified and directed by Engr-in-Charge.
S&F switch socket combination 2 in 1, 3 pin, 5/15 Amps, flush type (multipurpose). Complete all as specified and directed by Engr-in-Charge.
S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and directed.
S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge.
S&F in reapir rectangular block for mounting of switches, socket with 3 mm thick plastic laminated sheet cover of size 200x150x50 mm complete all as specified and directed by the Engr-in-charge.
S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 12 way complete all as specified and directed.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed.
Supply and fixing MCB SPN 240V, 10KA 'C' curve 40-63 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.
Supply and fixing MCB SPN 240V, 10KA 'C' curve 32 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.
Supply and fixing Rechargeable LED Bulb energy saver 9 W, B22(220-240 V) 50 hz, 6500k fast charging 2200mAH battery including, white color all as specified and as directed. Make:- Phillips
S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 20W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed.
M & L for GI Pipe (medium grade,ISI Marked) 32 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer and taking out old one including connection with street light complete all as directed.
Taking up the existing cables from trenches of any size all as specified and directed.
Supply, laying,fixing, passing through pipe or laid in trenches and testing underground XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 10 sqmm 2 core complete all as specified and directed.
Supply, laying,fixing, passing through pipe or laid in trenches and testing underground XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 35 sqmm 4 core complete all as specified and directed.
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrs in depth for laying of cable, fixing of stay etc 10 Sqm on plan and n exc 1.5 in depth and getting out in hard/dence soil complete all as specified and directed by Engineer-in-Charge.
Returing, filling in incl spreading, levelling watering and well ramming in layers n.exc 25cm width, Complete all as specified and directed by Engineer-in-Charge.
Removing excavated soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above starting point Completed all as specified and diercted by Engineer-in-Charge.
Sand cushioning for under ground cable 8 cm before laying the cable and 15 cm after laying and streching the cable complete all as specified and directed by Engineer-in-Charge.
M&L Un-reinforced precast factory made concreate cable covers, class LV type-I, with flat size 250x150x40 mm Complete all as specified and directed.
S&F Air termination, single pointed aluminium rod 12 mm dia and 300 mm long
S&F test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25 mm long hex. Head screw.
S&F LED flood light 210 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and lamp.
S&F aluminium strip 25mm x 3mm complete with saddles and fixing screws for fitting the strip.
S&F copper strip 32mm x 6mm buried in ground
S&F obstruction light
S&F Changeover 160 Amp 4 Pole
S&F LED High bay, 140 W
M&L 2x2 recessed light 18-42W led light and necessary testing on completion complete all as specified and as directed by the Engineer-in-charge. Model:- VenusneoHe2x2r18-42 Wled84, Make: Havells, Bajaj or equivalent.
Deduct Schedule of Credit of Rs (-) 1,73,951.50 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.
M/S MOHD MUSSA
M/S LIBE & CO
M/S MUNEER HASSAN AKHON
MS SHOWKAT ALIJOO
osho traders
M/S HONY CAPT RIGZIN SAMPHEL
THINLES OTZER
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .