REPAIRS REPLACEMENT OF OLD DETERIORATED STREET LIGHT POLES AND LED STREET LIGHTS GARDEN LIGHTS ALONG WITH CONNECTED WORKS AT VARIOUS LOCATIONS AT NOFRA UNDER GE (NW) NOFRA COLABA MUMBAI

Amount

Taking up old unserviceable XLPE insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor including old concrete cable cover from trenches / walls / ceilling / poles etc any size complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation, laying of UG Electric cable / staying of steel tubular pole etc. and getting out in soft and loose soil, complete all as specified and as directed .

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation, laying of UG Electric cable / staying of steel tubular pole etc. and getting out in hard/dense soil / road cutting & making good with bituminous where road cutting, complete all as specified and as directed .

Removing the excavated material/ soil not exc 50m out of MD land complete all as specified and directed by Engineer-in-charge .

Returning & filling in, including spreading, levelling, watering & well ramming in layers not exc 25 cm as in soil complete all as specified & directed .

Supply and laying High density poly-ethylene pipes (HDPE) of pressure 6 kgf/cm2 pipe, 25mm dia for laying of cable protection complete to walls/ trenches/ floor/ceilings complete all as specified and directed by Engineer-in-Charge. Make of HDPE pipe : Finolex / Dutron / Astral .

Supply and laying High density poly-ethylene pipes (HDPE) of pressure 6 kgf/cm2 pipe, 40mm dia for laying of cable protection complete to walls/ trenches/ floor/ceilings complete all as specified and directed by Engineer-in-Charge.

Supply , fixing and laying of PVC insulated XLPE, armoured LT cable, 1100 Volts grade with aluminium conductor of size 4 core 10 Sqmm laid in trenches/ through pipe/ ducts or fixed on wall etc ,complete all as specified and as directed. Make of cable : Polycab / Havells/ Finolex

Supply , fixing and laying of PVC insulated XLPE, armoured LT cable, 1100 Volts grade with aluminium conductor of size 3.5 core 25 Sqmm laid in trenches/ through pipe/ ducts or fixed on wall etc complete all as specified and directed . Make of cable : Polycab / Havells/ Finolex

Supply , fixing and laying of PVC insulated XLPE, armoured LT cable, 1100 Volts grade with aluminium conductor of size 3.5 core 35 Sqmm laid in trenches/ through pipe/ ducts or fixed on wall etc complete all as specified and directed. Make of cable : Polycab / Havells/ Asian (RPG)

Taking up loose XLPE cable from wall & Refixing only cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of sizes from 10 Sqmm 3.5 Core to 50 Sqmm 3.5 Core complete fixed on wall with suitable size of 'U' clamps with anchor fastner or saddles & screw complete all as specified and directed.

Supply and Fixing LED post top integral pole mounted decorative LED post top 25W with IP65 protection suitable for 40mm dia GI tubing including complete all as specified & directed. Make- Bajaj GLOBE Cart Part No 111741 BLPTSP 25W NW LED or its equivalent make in Jaquar / Philips / Havells as approved by GE.

Supply and fix LED Light fittings 20 W with cast aluminium housing heat resistant toughended glass, IP 65complete with all accessories including ,complete all as specified and directed by Engr-in-Charge. Make - Jaquar Cat No LGTP02X020XW or its equivalent make in Havells/ Philips as approved by GE.

Supply and lay in repair 40 mm dia GI tubing "light" grade for cable protection at road crossing/ hard standing/ plinth protection/ on the pole etc complete all as specified and directed. Make of GI pipe : JINDAL/TATA/ZENITH

Supply and fix in repair FRP type looping box of size 280x170x1300 mm including necessary arrangement to fix the looping box with the suitable size of cable glands with entry, nuts,bolts, washers flat iron etc comprising of the followings:- (a) MCB,63 Amps, TP (10 KA) (C series) - 01 No. (b) MCB 5 to 30 Amps, SP (10KA) (C series)-01 No (c) Neutral link - 01 No Make of FRP type looping box - Hansel or its equivalent as approved by GE. Make of MCB- Legrand / Schneider / GE

Supply and fixing in repair PVC insulated, stranded copper conductor of size 3 core 2.5 Sqmm in connection of FRP type looping box to light fitting connector, passing through GI pipe / tubular pole complete with fixing arrangement complete all as specified and directed . Make- Polycab/ Finolex/Havells

Dismantling the connections & taking out broken, damaged / rusted street light poles of any kind / make complete alongwith light fittings including necessary excavation, breaking PCC, returning/ filling and removing surplus soil out of MD land complete all as specified and directed.

Supply and fixing Steel tubular swaged street light poles complete with cast iron base plate ,finial taper plug,bolts,nuts and screws as specified type 410 SP-31 9.0 mtr long and painting with two coat of aluminium paint over one coat of primer on exposed surface of pole complete all as specified and directed by Engr-in-Charge. (NOTE : Excavation & PCC will be measured and paid separately) Make of poles :- National Tubing Company /Bombay Tubes / India Tube and co.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation, filling mass concrete including necessary formwork complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6 type C1 using 20 mm graded aggregate block masonry with solid block ,exc 10 cm in width and setting in mortar complete for coping of pole including necessary from work and fair finish to the exposed surface area without using extra cement complete all as specified and directed.

Supply and Fixing in repair pressure die cast aluminium housing, toughened glass, LED street light of capacity 120 Watts, high lumen output with IP 66, after replacing the old unserviceable street light fitting, wired with all accessories & PVC insulated, copper conductor wired 3 core 2.5 sqmm from looping box to fitting connector passing though pole complete with clamps, nuts, bolts etc complete all as specified and as directed. Make: Jaquar Cat Pat No. LSRT01S120XW or its equivalent make in Philips/ Havells as approved by GE.

Supply and fixing LED flood light fittings 120 W with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion with IP 66 on GI tubing vertical pole including all as specified and as directed. Make- Jaquar Cat Part No LFLD02S0120XC LED or its equivalent make in Havells/ Philips.

Supply and fixing LED flood light fittings 400 W with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion with IP 66 on GI tubing vertical pole including all as specified and as directed. Make- Jaquar /Havells/ Philips.

Taking down U/S high mast light fittings of height 15 meter after lowering the arm including taking out winch, gear box, from high mast pole complete all as specified and directed by Engr-in-Charge.

Material and labour required for oiling, greasing and servicing of steel wire rope , complete double drum winch system, control gear box, checking the internal wiring and balancing the arms duly vertical in position for smooth functioning of high mast tower complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair complete control gear box with all assessories as existing including alignment i.e. truly vertical in position, 2 point suspension system with steel wire rope 6 mm dia and suitable avaitiaon light as existing complete all as specified and directed by Engr-in-Charge.

M&L for switching on & off the mast fittings by automatic control using electro mechanical timer and contactor for automatic switch on & off of mast at present time over current and latch mechanism including 4 core PVC flexible cable 2.5 Sqmm multi stranded copper with 3 pin metal clad socket to plug the supply for luminaries shall be mounted on PVC rigid board of suitable size provided in the base compartment of mast to terminate the incoming power supply cable from junction box to incoming luminaries complete outdoor type weather proof with MCB 63 Amps 4 pole 35 KA for incoming complete all as specified and directed by Engr-in-Charge.

Supply and fix CC LED driver suitable for 25 W high power LED light fittings, Vin- 230V, AC, 50Hz , Vout- 32-42V DC, PF > 0.95, Current (I in) : <1.25A, Current (I out) : 1.0-1.5A with IP rating 66 duly taking down the existing UNSV driver complete all as specified and directed by Engr-in-Charge. Make- Jaquar / Philips/ Havells

Supply and fix CC LED driver suitable for 68-120 W high power LED street light fittings, Vin- 230V, AC, 50Hz , Vout- 68-80V DC, PF > 0.95, Current (I in) : <1.25A, Current (I out) : 1.0-1.5A with IP rating 66 duly taking down the existing UNSV driver complete all as specified and directed by Engr-in-Charge. Make- Jaquar / Philips/ Havells

Supply and fix CC LED driver suitable for 90-165 W high power LED street light fittings, Vin- 230V, AC, 50Hz , Vout- 88-93V DC, PF > 0.95, Current (I in) : <1.7A, Current (I out) : 1.5A with IP rating 66 duly taking down the existing UNSV driver complete all as specified and directed by Engr-in-Charge. Make- Jaquar / Philips/ Havells

Supply and fix CC LED driver suitable for 400 W high power LED street light fittings, Vin- 230V, AC, 50Hz , Vout- 100-120V DC, PF > 0.95, Current (I in) : 0.110A, Current (I out) : 0.63 A duly taking down the existing UNSV driver complete all as specified and directed by Engr-in-Charge. Make- Jaquar / Philips/ Havells

M&L for Earthing with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, burried directely in ground (earth pit not less than 2.5 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised iron strip 32 x 6 mm with the help of bolts, nuts, check nuts and washers of galvanised iron or steel, including necessary excavation, PCC 1:3:6 type D2 and PCC cover 1:2:4 type B1 weatering arrangement with GI pipe funnel, jali, complete all as specified and shown in electrical plate No.3 including connection to the earthing test point and testing on completion.

M & L for preparation of deteriorated /rusted poles, scraping and applying two coat of aluminium paint after one coat of red oxide primer and marking the pole numbers with Black/ yellow paint complete all as specified and directed by Engineer-in-Charge. Make- Asian Paint / Berger / Nerolac

SATYANARAYAN CONSTRUCTION

DHARMESH ENTERPRISES

NOEL ENGINEERS